i have a problem with VS2008 Pre build command.
I need to compile a lot of XSLT style sheets and generate a common assembly, i use xsltc.exe but the command string is too long for command prompt.
I tried to use also a .bat file, i use the xsltc.exe command in the best way for save some character, like using "\c" instead of "\class", but the problem still remains.
Do you have any suggestion to solve this problem? please note that i can't install on my machine additional tools.
Thank You All!
Can you post the full command you're trying to run?
If you are trying to feed the compiler with whole path names to the stylesheets, would it perhaps help to, in the batch file, cd to the directory containing your stylesheets and then run the following command?
c:\Program Files\Microsoft SDKs\Windows\v7.0A\bin\xsltc /out:MyAssembly stylesheet1.xsl stylesheet2.xsl stylesheet3.xsl [...]
i.e. for example:
cd c:\My\Stylesheets
c:\Program Files\Microsoft SDKs\Windows\v7.0A\bin\xsltc /out:MyAssembly stylesheet1.xsl stylesheet2.xsl stylesheet3.xsl ...
instead of:
xsltc /out:c:\My\Stylesheets\MyAssembly c:\My\Stylesheets\stylesheet1.xsl c:\My\Stylesheets\stylesheet2.xsl c:\My\Stylesheets\stylesheet3.xsl [...]
I have not worked with xsltc (and you haven't provided enough information) so please excuse any formal flaws.
Related
Environment: windows 10, VS2013.
I have a C++ app, using Poco framework (Poco 1.7.6) and I need to launch some batch files. It works without problem, but for a particular script, and I can't figure out the reason.
This particular script is as follows (let's call it buildMySolution.bat):
set BUILD_DIR=%~dp0
call "C:\Program Files(x86)\Microsoft Visual Studio 12.0\VC\vcvarsall.bat"
msbuild /p:Platform=%~1 /p:Configuration=%~2 %BUILD_DIR%\Mysolution.sln
As you can see the batch file simply compiles a VS2013 solution. Needless to say that this simple batch works perfectly well if launched from command line.
The problem is that this batch is in drive D: (in D:\DevRoot\build\MySolution) and when launched from my app (in D:\ drive as well), I get a "cannot find the path" on the second line.
I tried several modifications in the batch: like forcing C: or cd /D C: ... it can go to C: but not further, it refuses to cd to the directory containing vcvarsall.bat (again, I know the path is correct as the very same script executes fine from command line). It has however no problem coming back to initial directory through a cd /D %BUILD_DIR%.
To launch the script from my C++ app, I use this:
Poco::ProcessHandle handleBuild = Poco::Process::launch(path_to_script, argsBuild);
handleBuild.wait();
The Poco launch is just a thin wrapper around CreateProcessA(), I don't see anything special in their code (Poco Process.cpp).
I tried as well to specify the working directory to be the directory containing vcvarsall.bat, but then CreateProcess fails.
I just found a solution: I changed the line (in the batch buildMySolution.bat):
call "C:\Program Files(x86)\Microsoft Visual Studio 12.0\VC\vcvarsall.bat"
to:
call C:\PROGRA~2\micros~1.0\vc\vcvarsall.bat
Believe it or not: using DOS names and removing quotes makes it work!!!
Bug or feature, I'm not sure...
I was wondering if anyone can help me. I'm currently working on a game engine project which involves its own c++ compiler. For this I'm "borrowing" the visual studio 2013 c++ compiler. everything works fine. The problem I am having is a cant figure out how I would pass commands to the elevated program in a batch file.
Let me Explain, right now I am using a program which calls the "vcvarsall.bat" file and passes in "x86" as a parameter. This is great for manual entry as it then allows me to input the commands to compile files. E.G "cl /EHsc <cpp files>"
As of now, when I add commands after I call "vcvarsall.bat", they just give me a command reference error saying the command is not recognized.
What I want to achieve is being able to call one bat file which executes and compiles all of my code for me. instead of having to manually type in the commands every time. This way the entire process is easier for the user.
Any help would be appreciated,
Thank you in advance!
when I add commands after I call "vcvarsall.bat"
Maybe it has been too long since I last did a batch file .. hope the following gets you started:
I think any .bat file will accept parameters, and internally, the .bat writer (i.e. you) uses special identifiers. Often they are named something like %1 and %2, etc. (some scripting languages use $1, and probably a few other approaches)
Without consuming these parameters in your .bat file, the command line interpreter tries to use the parameter as another command (so you get 'command not recognized')
Search all .bat files on your system for %1 (or $1 or whatever) ... maybe you'll find enough hints.
Thank you all for the help, the way I solved the problem was by finding the last batch file which was called and making the end of the file call another batch file in the main compile directory, this means I can programatically generate this batch file making it incredibly easy to generate custom compilations. thank you all,
Alister
I have a project that I converted from a makefile that has a source file that expects the command line options from the compiler. For example for when the project was built with gcc if you did program --help it would spit out the gcc command line used to compile the program.
How can I do the same thing in Visual Studio, so that it spits out the cl command line used to compile the program? Basically I want to hit F7 (to build solution) and have the whole thing automated. I can't find a macro for it. Thanks
edit; I mean programatically, so for example I want when I run the program for its output to contain the cl.exe command string that is used. You can see the command line at Configuration Properties > C/C++ > Command Line > All Options but I can't find a macro for it or some way to encapsulate it in a file.
Since VS switched the underlying build system to MsBuild the command line as shown in that dialog is created programatically within VS only. It might not even be the exact command line passed to cl: MsBuild itself invokes CL via a task and as such there is no direct link with what is shown in VS nor is there a way to get the command line out of it.
Anyway, there is no such thing as the command line since each source file might have different options. Furthermore I doubt you want the full commandline including the absolute include paths etc. Nobody is interested in that. Now if you make clever use of the macros from http://msdn.microsoft.com/en-us/library/b0084kay.aspx you can sort of recreate the command line yourself since most options are there:
std::string CompilerCommandLineOptions()
{
std::string cmd;
#ifdef _CHAR_UNSIGNED
cmd += " /J";
#endif
#ifdef __cplusplus_cli
cmd += " /clr";
#endif
#ifdef _CPPRTTI
cmd += " /GR"
#endif
//etc
return cmd;
}
Note: are you sure it's worth the hassle? Is there really somebody interested in the command line? It's not even sufficient to build the project. Why not the linker options as well then?
A .vcxproj is a Visual Studio project in the MSBuild project format. You can build it by running msbuild.exe, devenv.exe, devenv.com, using the Visual Studio GUI or the MSBuild API.
Visual Studio GUI uses the MSBuild API. In doing so, it limits the MSBuild output.
If you want more details, change your user settings in Visual Studio:
Tools > Options > Project and Solutions > Build and Run > two verbosity settings
Detailed will show the cl.exe command lines.
The closest thing which I came across cl command line which msuild executes is "hacking" the rsp file used while calling cl.exe.
Using Override compiler solution, I changed ClCompile ToolExe to custom mycl.bat script and this script received an argument which was #tmp-1234xxx.rsp file. This rsp file contained whole command line except cl.exe path, something like -
rsp file
/P /DDEBUG Source.cpp
Then after making desired changes in the rsp file by calling a separate bash script which were very minor for me, I called cl.exe with contents of my rsp file. So, whenever user hits the build button, this script executes.
mycl.bat script
#echo off
SET PATH=%PATH%;/usr/bin //to call cygwin bash
set parameter=%1
set parameter=%parameter:~1% //to remove # in the beginning
c:/cygwin/bin/bash process.sh %parameter%
process.sh
iconv -f UCS-2 -t UTF-8 <$1 >$1.conv //file converted to UTF-8, else bash wasn't handling it well
contents=`cat $1.conv`
#Processing on file contents here
path/to/cl.exe $(contents)
Very nasty solution, but it worked for my use case. I wanted to change the names of the file on the go based on some logic.
The problem I faced is Visual Studio uses tlogs written by CL Task to check while file needs to to be rebuilt on incremental build and my target's tlogs files were not enough. There were tlogs of every command in batch and bash scripts but not for whole target. So, it was building whole thing on incremental builds also.
I am trying to find a way to call notepad++ from command line with compare plugin showing the compare result providing I pass 2 files name which I want to compare.
Think like I have a batch file, which does some work and result is opening notepad++ showing 2 files in compare mode. (Yes, compare plugin is installed)
If anyone has any other suggestion to using any other editor or software also welcome..
tl;dr:
The command is Notepad++\plugins\ComparePlugin\compare.exe file1 file2.
Details:
Download the compare plugin https://bitbucket.org/uph0/compare/downloads/ComparePlugin.v1.5.6.6.bin.zip. Installing the compare plugin from the plugin manager within Notepad++ does not install the requisite exe. I assume you could also build from source to obtain the exe.
Follow the manual installation instructions in the readme:
To install manually, copy ComparePlugin.dll and ComparePlugin subfolder
into the plugins directory C:\Program Files\Notepad++\Plugins.
For a portable Notepad++ installation, you need to run the command from a directory above the notepad++ directory (or with absolute path of exe), otherwise you get an error that Notepad++.exe is not found.
The commands look like this:
>cd C:\portapps\Notepad++
>cd ..
>Notepad++\plugins\ComparePlugin\compare.exe C:\files\file1.txt C:\files\file2.txt
ufo's answer put me on the right track but it did not contain the commands to run.
There's a tool called NppCompareLoader doing exactly what you want. Simply drop it in the N++ installation folder. I'm using it since many years as a diff viewer for TortoiseSVN and TortoiseGit, thus you should certainly be able to call it right from command line.
/EDIT
Since the (unofficial) Compare-plug-in version 1.5.6.6 the additional loader mentioned above isn't required anymore. There's already one included in the plug-in. Here's the regarding change-log fragment:
NEW: Loader for using N++ as an external diff viewer (e.g. in TortoiseSVN, TortoiseGit, ..)
I'm trying to run cmake in Visual Studio 10, for esys-particle-win.
My path to cmake:C:\Program Files (x86)\CMake 2.8\bin\cmake.exe
My path to esys-particle-win:C:\esys-particle-win\trunk\buildvs2010\mkvs10.bat
The commands I'm typing in the administrator command prompt of Visual Studio 2010 are:
cd c:\esys-particle-win\trunk\buildvs2010
mkvs10.bat
and I'm getting this error:
'cmake' is not recognized as an internal or external command
contents of mkvs10.bat:
cmake .. -G "Visual Studio 10" -G "NMake Makefiles"
could anyone tell me where I am wrong?. I don't know computer programming. I followed the instructions mentioned in section 2.3.1 of this site: `
https://launchpadlibrarian.net/139659869/esys-particle-win-%28v2.1%29-build-instructions.pdf
`
Any help would be greatly appreciated, Thank you.
The error message means it cannot find cmake.
You can add its location to your path from the prompt like this:
set PATH="C:\Program Files (x86)\CMake 2.8\bin\";%PATH%
As #doctorlove mentioned above, the error message means it cannont find Cmake.
Note that quotes aren't needed in PATH environmental variables on Windows. So the above example on Windows would look like:
set PATH=C:\Program Files (x86)\CMake 2.8\bin\;%PATH%
I had the same issue, and resolved it in this post.
note that if you installed cmake via chocolatey, you may have neglected to add the argument --installargs 'ADD_CMAKE_TO_PATH=System'. If you've already choco-installed cmake without that argument, re-installing via --force won't respect the new argument: you'll need to uninstall and then install. specifically choco install cmake --installargs 'ADD_CMAKE_TO_PATH=System'
I had the same problem since I intalled CMake in D:\Program Files , I fixed it by manually adding a path variable.
Open control panel
Go to System and Security then go to System.
How it looks like in after step 2
Here Select advanced System settings, a dialogue box will appear.
The dialogue box
Now go to Environment Variables.
Now select path and then click on edit
After the 4th Step
Here add a new path at the bottom of many pre existing paths.
In my case i installed CMake in D:\Program Files\
So I need to add path D:\Program Files\CMake\bin. You should copy the path to your CMake folder and add \bin at the end.
Now open you have to restart command prompt to see the changes.
I found the CMake to be:
C:\Program Files (x86)\Microsoft Visual Studio\2019\BuildTools\Common7\IDE\CommonExtensions\Microsoft\CMake\CMake\bin
I added it to the User PATH as described above, by hrithik singla, and node-gyp worked, specifically "npm install". I expect it will change again in the future. So the way I found it was by having Windows Explorer search "C:\Program Files (x86)\Microsoft Visual Studio\2019" and then dig through the results for the CMake path. Probably, other development tools will install CMake to different folders.
I'm trying to build a project with my recently downloaded Visual Studio Community 2017, but had no CMake on my path.
It did not help, even after I had gained VCVars: "C:\Program Files (x86)\Microsoft Visual Studio\2017\Community\VC\Auxiliary\Build\vcvarsall.bat" x64
Instead of separately installing a copy that might work with these answers, although I'm not sure it would have the generators I need(?), I found one in the installation directory, which had a different path than what was in the guide I was using.
Here is my invocation line: "C:\Program Files (x86)\Microsoft Visual Studio\2017\Community\Common7\IDE\CommonExtensions\Microsoft\CMake\CMake\bin\cmake.exe" -G "Visual Studio 15 2017" -DCMAKE_BUILD_TYPE=%CMAKE_BUILD_TYPE% ..
There are a few issues that can cause this. And it's mostly windows related. This is more on the cmake side of things, but it addresses a few windows specific problems you may encounter using CMake with Windows. This is fresh in my head, and this popped up, so I'll drop this here. Here we go.
1. CMake will separate a variable to list if there are spaces in the path.
If you are calling another instance of CMake from within CMake, Sending a Program Files path will slice those strings, and divide your variable into a 3 item list. The spaces will be replace by a semicolon divider.
set(CMAKE_EXE C:\Program Files (x86)\CMake\bin\cmake.exe)
"C:\Program;Files;(x86)\CMake\bin\cmake.exe <- CMAKE_EXE is now a 3 item list separated by ; "
list(LENGTH ${CMAKE_EXE} count)
message("CMAKE_EXE has ${count} items") "-> displays 3"
On Windows, All path variables should be enclosed in quotations to infer that they are 1 single string variable. Not just for cmake, but for batch scripting, basic command line etc.
set(CMAKE_EXE "C:/Program Files (x86)/CMake/bin/cmake.exe")
Now, any time you reference CMAKE_EXE you'll need to always keep it enclosed in quotations, becuase cmake WILL break it to a list again otherwise.
execute_command(COMMAND cmd /c ${CMAKE_EXE} -P myScript.cmake) <-- BAD
execute_command(COMMAND cmd /c "${CMAKE_EXE}" -P myScript.cmake) <- GOOD
Just get in the habit of always putting quotations around paths you reference.
2. Stay away from the Windows back slashes!.
Windows uses back slashes by default for it's path divider, which are escape sequences in most coding languages, including CMake. Just send windows / forward slashes instead. This eliminates any headaches you'll have with doubling up escape characters in string literals to match the path. \
And remember, windows is always gonna try to give you paths in \ format. Windows likes backslashes in certain places like environment paths, and settings files, while cmake likes forward slashes. You need at some point to convert between the different formats.
Use something like this to convert the path to be more cross platform compatible. You can replace "in place" on your existing variable.
"CMAKE_EXE = C:\Program Files (x86)\CMake\bin\cmake.exe <- value before"
string(REPLACE "\\" "/" CMAKE_EXE "${CMAKE_EXE}") "<- notice the quotes again"
"CMAKE_EXE = C:/Program Files (x86)/CMake/bin/cmake.exe <- value after"
Take a look at these CMake functions designed to do path conversions.
https://cmake.org/cmake/help/latest/command/file.html#to-native-path
3. Sometimes, Windows interprets unquoted paths as 8.3SFN (8DOT3) format
8.3 filename
Back in the days of MSDOS and Windows 95, we dealt with the FAT file system and 8.3Short Filenames. The command prompt could not work with more than 8 character filenames so we needed a way to access long windows filenames before quotation string support. 8 characters + 3 for the extension. And most systems still support 8.3 today. Here's an example.
C:\Program Files\Windows\System32\Calc.exe <- \Program Files\ is 13 characters
in order to CD into this path without quotes, you have to use the short path. like so.
CD C:\Progra~1\Windows\System32\Calc.exe <-- *Progra~1 is 8 characters, 1st occurrence.*
You just break the File or Folder name down to 6 characters, plus ~n (n=occurrence)
If we had a C:\Program Files (x86) path then, like we do today, it would be the 2nd path who's first 6 characters matched, and both exceeded 8 characters.
C:\Program Files becomes -> C:\Progra~1\
C:\Program Files (x86) becomes -> C:\Progra~2\
C:\MyLongFilename.txt becomes -> C:\MyLong~1\
Whenever I am having trouble accessing the full length file system through software that is unable to send escape sequences or quotations, some other kind of limitation, I have to resort to using the 8.3 short filename to access certain paths. On some Windows boxes, quotes won't even work and it will be some LONG process to enable them on the host machine. This makes for a good workaround when that happens.
Getting the short path (via sending to command prompt)
C:\ for %A in ("C:\Program Files (x86)\CMake\bin\cmake.exe") do #echo %~sA
will produce C:\Progra~1 for you to use
Or, get the short path by sending the path as an argument to a batch file.
::getShortPath.bat
#ECHO OFF
echo %~s1
USE:-> getShortPath.bat "C:\Program Files (x86)\CMake\bin\cmake.exe"
To wrap this up, here are three examples of what could be happening in the background behind CMake when a windows path is not resolving.
Not using quotations around the path
Using quotes works. But sometimes you can lose your quotes if the stdio >> runs through more than one process. In which case you'll need to send them in as escape sequences "\"C:/Program Files (x86)/CMake/bin/cmake.exe\""
4. Paths and Command Line Arguments need to be separate variable or instances from each other.
When sending arguments from CMake, you DO want them to be separate variables from the path variable. Set(CMAKE_EXE "C:\Program Files (x86)\CMake\bin\cmake.exe --version") will not work. Only paths and arguments with spaces in them need to be wrapped in quotes.
set(CMAKE_EXE "C:\Program Files (x86)\CMake\bin\cmake.exe" --version --trace "C:\My Soure Dir")
Putting it all together
If anyone is having problems with Windows/CMake paths like I was in the past, Study this code thoroughly until you completely understand it. All of the quotation placements. When you understanding what's quoted and what's not, and why, it should help a lot in the long run.
set(CMAKE_EXE "C:\Program Files (x86)\CMake\cmake.exe" CACHE INTERNAL "") <- make it a global variable.
set(ARGUMENTS --version --trace)
set(MyStringWithQuotesIncluded "\"This String wants it's quotes included\"")
set(MyCMakeLists "C:\MyApp\ProjectDirectory")
set(BuildHere "C:\MyBuilds\MyOSProject\bin")
set(FULL_COMMAND "${CMAKE_EXE}" ${ARGUMENTS} -DSTRING_VARIABLE="${MyStringWithQuotesIncluded}" -S "${MyCMakeLists}" -B "${BuildHere}")
execute_command(COMMAND cmd /c ${FULL_COMMAND} WORKING_DIRECTORY "${BuildHere}")
I had loads of issues working with windows paths through layers of CMake when I first started out. I hope this can help someone avoid all of that in the future.
Step 0: Install CMAKE
Make sure you have CMAKE installed on Windows:
https://cmake.org/download/
The installer will ask you if you want it to automatically set the PATH variable for you.
set the path to C:\Program Files\CMake\bin