i spent a lot of time trying to get these to install properly, so here i am.
I've already googled my problem countless times in different forms and still can't resolve it.
It's just very confusing because there are so many versions out there, and i don't even know how to build the binaries, if even have to do that, and i couldn't find the configure.exe. I don't have it after i installed QT5.
I have python, perl, Visual Studio, QT5,QT addin, and openssl installed.
When going to QT5, QT Options, then Add, add: C:\Qt\5.2.1\mingw48_32 as the path and got an error about qmake not found or something.
So I deleted libqtmain.a and libqtmaind.a as suggested by some site and that solved the problem.
I've also tried this: http://blog.kikicode.com/2011/09/qt-version-uses-unsupported-makefile.html
but i couldn't find the Trolltech folder, so i stopped.
But now my problem is this
"This QT version uses an unsupported makefile generator (used: MINGW, supported: MSVN.NET, MSBUILD).
I don't even have a configure.exe file, and can't launch it from the visual studio command line.
I really have no idea what to do. I've been attacking this problem for all of yesterday, and i've ran out of steps today. Please help me.
I don't have the express version of VS. Just so you know.
I just solved this issue. It get me mad, but is easy.
The Add-in looks to $(QTDIR)\mkspecs\default to know which one to use. The "default" folder is not created after configure and build Qt.
So the way I solved is to copy&paste the "win32-msvc2013" folder as "default".
And now the Add-in recognised Qt.
BTW, after build the sources "nmake", I make an install of them in another folder so I have just the binaries and tools but not all the source that I don't need for develop software based on Qt.
Once the compilation is complete, then type:
Set the root where the installation will be, ex:
set INSTALL_ROOT=\Sw\Qt\qt-4.8.5-install
Execute in your source's root the command:
nmake install
So after trying everything i decided to run compile the binaries.
I think not a lot of people have this problem and there is no solution on the internet because the 2013 addin is very new. So here is what i did, and what worked for me, after countless hours of trying.
I downloaded the zip located under the main downloads on their webpage: http://qt-project.org/downloads
I uninstalled the old QT. (kept the addin)
I unzipped the zip it into a folder i named QT at C:\
Then i ran the configure.bat located inside.
On the Visual Studio cmd i cd to the C:\QT\qt-everywhere-opensource-src-5.2.1
directory where the configure file is,
Tried running the 'configure' file, there was no configure.exe. Then i ran 'nmake', that took like three hours.
The i went into C:\QT\qt-everywhere-opensource-src-5.2.1\qtbase\qmake
and made a folder bin where i copied the qmake.exe found in that same folder.
Finally i went into the VS addin, qt, qt options and i added that directory.
And it works!
I'm using Qt 5.6, msvc2014, but had the same issue at first. This issue was solved for me by updating to Add-in 1.2.5 without changing anything else.
Related
I am using Visual Studio 2019 on Windows 10 and am trying to use GTK in C++ and installed it using vcpkg.
I've installed GTK using vcpkg according to the guide from GTK. I'm using Visual Studio 2019 and it is able to compile and run the example program here, but there is an issue regarding the theme and icons. According to the installation guide, under the section Building and distributing your application there are some things that must be done to get themes and icons to work.
I've started by downloading the Windows theme the guide suggests and have it in a share directory and then I've created a settings.ini file in an etc directory. It says to place this in the "install directory", which I assume is where Visual Studio is placing the exe for the program. I've tried it in both build and release, in the source files, in the top project directory - all with no success (and I did make sure it is targeting x64).
Just in case I also tried placing these where vcpkg is installed as well as where vcpkg installs gtk. No luck. When the program runs I get the warning
(gtkExample0.exe:16772): Gtk-WARNING **: Could not find the icon 'window-minimize-symbolic-ltr'. The 'hicolor' theme
was not found either, perhaps you need to install it.
You can get a copy from:
http://icon-theme.freedesktop.org/releases
So it seems that it is never finding the ssettings.ini file telling it to use the Windows 10 theme. Has anyone had any luck with getting this to work (both from VS2019 debugging runs and in deployment)?
To summarize the files:
share\themes\Windows10\gtk-3.0\gtk-3.20\ (downloaded from suggested GitHub repo)
etc\settings.ini contains:
[Settings]
gtk-theme-name=Windows10
gtk-font-name=Segoe UI 9
I've placed these in
<VS2019Project>\x64\Release,
<VS2019Project>\x64\Debug,
C:<path_to_vcpkg>\vcpkg\packages\gtk_x64-windows,
C:<path_to_vcpkg>\vcpkg\installed\x64-windows
All with no change when running from VS2019 under Release or Debug.
Theme and icons considered as external resources are not distributed by vcpkg, and the instructions given in the distribution guide from GTK regarding where these resources should be layout on windows 10 are not crystal clear. The problem has also been reported here vcpkg issue#4417.
The solution proposed hereunder is to install
all the resources in the <VS2019Project>\x64\Release directory of your VS project where your .exe application lives [This is a local solution the problem. A global approach should consider the setting of some user-defined free desktop environment variables which is not discussed here]. Icons can be picked from an ancillary MSYS2 distribution and the theme as indicated in the GTK Guide. The solution should be replicated for the Debug branch.
Supposing you have MSYS2, install mingw-w64-x86_64-adwaita-icon-theme package with the pacman package manager if not already done on your MSYS2 installation pacman -Syu mingw-w64-x86_64-adwaita-icon-theme.
Copy C:\msys64\mingw64\share\icons to <VS2019Project>\x64\Release\share\icons
you should get both hicolor and Adwaita icons as subdirectories of your target dir.
Copy the theme resources downloaded in the source gtk-3.20 directory directly into <VS2019Project>\x64\Release\share\themes\Windows10\gtk-3.0\. Do not locate these resources into a gtk-3.20 subfolder: to understand why consult this article Theme Location [assuming here that no global desktop environment variable has been set].
Create a <VS2019Project>\x64\Release\etc\gtk-3.0 directory, put your settings.ini into it.
Recompile and you should obtain a windows 10 look and feel for your application window.
I'm new to Qt, but have been working with Visual studio for C/C++ development for a few years. Now I'm trying to build a GUI for my project. I installed Qt 5.11.0 and the Qt VS Tools on both my work computer and home PC. At work I can build and run my project with the VS debugger, however on my home system I can build but can't run either with VS debugger or simply launching the app. I tried in release and it runs fine.
The error I'm getting is :
The code execution cannot proceed because VCRUNTIME140D_APP.dll was not found.
I get 4 of these, the first two want VCRUNTIME, the second two want MSVCP140D_APP.dll.
Solutions I've tried so far :
Uninstalled Win SDK and reinstalled
Uninstalled VS2017 and SDK and reinstalled
Searched System32, SysWOW64 and VS install directories - found msvcp140d.dll and vcruntime140d.dll, but no _app.dlls
Does anyone know what these are included with and where to get them? I can't figure out why I have them on my work computer but not at home. I have the same VS updates, same Qt version, and SDK on both systems.
Using :
Visual Studio 2017 v15.7.1
Qt 5.11.0 - msvc2017_64
I suppose I can just copy the .dll's from my work pc and drop them in the appropriate locations on the other, but I'd like to know what they should have been installed with so I can have the same setup on both systems.
Edit:
I also tried changing the platform toolset to VS2015 with Qt versions msvc2015_64 and winrt_x64_msvc2015
I found this post concerning the same missing _app.dll files. There wasn't any answer there, which is why I tried reinstalling the SDK in the hope the missing files were included there.
Edit 2:
I just scanned my entire system at work and it turns out that I don't have the missing .dll there either. That tells me that there is a difference in the project properties or configuration between the two. I use git for source control, and I am currently the only contributor to this project. When I try to build and run just the example from the getting started guide I have the same problem at home with missing _app.dll files, however it works fine at work. I'm totally confused now, and any hints are greatly appreciated.
Solution:
After trying for a couple of hours making new solutions etc. I decided to delete the entire build folder and put fresh copies of all the dependencies into it. My project now runs fine in debugging mode.
I'm fairly certain that when I originally copied the Qt .dll files into it I must have grabbed them from one of the winrt folders rather than the msvc2017_64 folder. To test I replaced the working .dll files with those from the winrt_x64_msvc2017 folder and sure enough the same errors again. So, this was a dumb mistake on my part, but hopefully it'll save someone else a lot of hair-pulling in the future.
Due to the administrative privilege of the application, I need to install my program including .exe and .dll in C:\DestFolder\SubFolder\ but I keep getting C:\Program Files\\[Manufacturer]\\[Product Name]\ where the placeholders are specified in the properties window.
I tried this article but no good.
Please don't give me answer like try changing the defaultlocation to C:\Destination\ of the Application Folder as I have already tried. Also I don't want solution like just change the installation destination path manually during the installation.
I have found the answer from this article:
"[ProgramFilesFolder] is built in, and correctly leads to the Program Files directory on the target machine, no matter how customized the setup of Window is..."
There might be tools out there that allow installing outside of Program Files.
[Edit] Infact I've found out this great extension for VS 2017 community called Wix. There's a guy who did a fabulous tutorial on it.
I've looked for an answer during a few days and I haven't found anything similar anywhere;
I downloaded Qt from the official website, installed it and apparently compiling is fine. But whenever I try to execute (Ctrl+R) any app, even the basic one which only displays a window or widget, QtCreator itself crashes. No error message, nothing, just crashing.
I've tried to redownload and reinstall it a few times with different settings, but nothing will do.
I'm running QtCreator on Windows 7 64 bits. I'll try on my laptop which is also running windows and will update if I find anything.
Any help would be appreciated, I need to start a project as soon as possible. I'm relatively new to QT and if you need info on anything just ask me. Thanks :)
Use dependency walker, http://www.dependencywalker.com/
and post any missing dependencies. It is possible some install targets or options are missing from when you installed QtCreator, which can be resolved with the maintenance tool in the same directory you installed Qt.
Also, are you using the Visual Studio compiler(must have Visual Studio installed separately, and mark the option during install), or the Ming compiler(2 options checked during install or maintenance)?
Check if your antivirus is locking it, I had a similar issue time ago and it was due to antivirus (Avast specifically). Disable antivirus' realtime shields and try to execute a basic app.
It is necessary to use QtCreator? I use QtDesigner snd VS2013 and things go very well. :)
check this thread Qt Creator Plain C++ Project won't run/debug... and this C++ - QtCreator doesn't show any output
I'm trying to use Qt4 using the Code::Blocks IDE. I'm running Linux Mint and I'm getting some errors. I looked around and found some people that had the same problem as me, but I can't seem to get their solutions working on my computer.
I installed Qt4 using the command
sudo apt-get install qt4-dev-tools
And when I type whereis qt4, I get qt4: /usr/lib/qt4 /usr/include/qt4 /usr/share/qt4
If I select "Create new Projet" in Code::Blocks and Select Qt4 project, it asks for Qt's location, which is $(#qt4) by default. If I click next, it says Code::Blocks doesn't know the "qt4" variable and gives me a prompt to set the base location, the include directory, etc.
Since I don't have any idea as to what I should be putting in there since nothing works (either it says "QTCore cannot be found in the specified directory", or the "lib" directory couldn't be found, etc.).
I tried what was posted on this forum: http://crunchbang.org/forums/viewtopic.php?id=18210, but it didn't solve my problem and I get the same errors.
In the "/usr/share/qt4" directory, there's a link to the "include" directory, but not to the "lib" directory.
I'm pretty new to Linux and all of this, so I'd like it if the answer was very detailed explaining what I did wrong / what I have to do.
Install the QtSDK
As a first step I would advise you to download directly the QtSDK, from the project site here.
Note: You could also use the precompiled version for your Mint version,
but in my personal experience, when working with external SDK,
you have more independence in development, it also allows you to work
freely with multiple versions of Qt simultaneously without move any
dependence of your OS.
You can follow the graphics steps to install the SDK, I advise you to check the option "download source", later this is going to be used for debugging code, and if necessary will allow the recompilation of some classes.
Now your QtSDK is installed on the folder eg "/usr/local"
So, all references inside your IDE should refer to this location.
Install the C::B
You can use the version available in "Software Manager"
Configure the C::B
When we start a new project and asks the location of our SDK we indicate this directory /usr/local/QtSDK/Desktop/Qt/4.8.1/gcc
Now the project is ready!
Note: "/usr/local" and "4.8.1" are variables depending on where
and what version you have installed.
Is very likely that your build directory, is not correctly assigned in "Settings->Compiler and Debugger->Toolchain ...->Compiler's Directory"
will be the default "usr" which should be replaced by "/usr/bin"
Now, when compiling with the standard project ".pro" and if your project has the requirement to use a "moc" tool strategy, the simplest way to do that, is use a customized Makefile, with all stages of compilation.
To learn how to make a customized makefile, you can read this answer.
And although I would advise again:
Although that CB is an optimal environment for working with wxWidgets, and C/C++ in general, I personally think that in the case of working with Qt, QtCreator provides a development environment more native and optimized to work with your projects QT.