I'm trying to install qt-creator on my computer (windows 8.1). I have this installation qt-windows-opensource-5.1.1-mingw48_opengl-x86-offline but when I run it, nothing happens. The installation process won't start. I have tried installing qt-windows-opensource-5.1.1-msvc2012-x86_64-offline which installs fine but the compiler is not stable. What should I do?
Just found the solution. Turns out the installation file was corrupted. i download the same version from a different mirror and worked just fine. Thank you all for your comments and answers
Related
While helping my friend spin up MinGW and a C++ environment on his Windows 8 computer, I ran the get-mingw script and waited as it ran through all the mirrors for required downloads. However, three downloads completely failed:
libltdl - installer script hung and then moved on after pressing "OK"
automake-1.11 - installer script tried finding 1.10, then 1.9, then 1.8, then 1.7 (all of which failed) until finally settling on 1.6
mktemp - script hung and moved on after pressing "OK"
In all three cases, the script gave me a nice error log upon completion, showing that a majority of packages had been downloaded and installed except for these three, which showed up as errors. However during the installation process I had simply gone to the MinGW sourceforge page and manually found and downloaded each .bin.tar.lzma file that was missing.
Now that I have them, is there a good accepted way to unpack and plug them into my friend's existing MinGW install? In case it's tough, I'm comfortable with unix and dos command line so I'll be able to move executables into the MinGW/bin folder if that's what's needed, I just want to check for the best way to 'fix' the install.
As a side note - even though the error log says these are required packages, adding MinGW/bin/ to the PATH still allows for use of gcc and g++, although not make (possibly because of automake failure?). Is this standard behavior?
Firstly, the package issue can be fixed by using the MinGW installer - keep the packages selected and go to "apply changes" and the script will probably try to redownload the missing packages. I think the original problem was probably just a shoddy wifi connection during repository connection.
However, I then ran into a problem where I tried to run gcc and it gave me a missing -lpthread error ... but this question was able to help me fix that, and gcc and g++ are working fine now (haven't opened and tested Eclipse yet though). Just in case of link decay, the issue I cited arises from the MinGW installer script not downloading the lpthread library upon installation. To fix that issue, quoted from link:
Just run and open MinGW Installation Manager, which should be pre-installed with MinGW, select "All Packages" on the left panel, and on the right panel, search for "mingw32-pthreads-w32" packages and install them.
I think the Installation Manager has libpthread and pthread available for install, and pthread libs were the ones that seemed to solve it for me.
As title,
Build successful, but the exe can't run. can not found msvcr100.dll.
I can put msvcr100.dll with exe in the same dir, the exe can run.
But I just want only one exe file.
Anyone know how to do?
Has solved. This is a bug of pyinstaller3.2, the new in the git has solved this bug. Down the newest source in the github, erverything works fine.
Has solved. This is a bug of pyinstaller3.2, the new one in the git has solved this bug. Down the newest source in the GitHub, everything works fine.
This is correct, I cant tell you how much that answer helped me out. I have been trying to build a single exe Exploit to execute on Windows XP with-out it crashing for my OSCP Labs/Exam. I followed so many tutorials and nothing seems to work. I was able to build the EXE but could not get it to run under a single EXE.
If anyone who reads this is getting "This Program cannot be run in DOS mode" try running it from another machine with the same build (Windows XP). There is not much info out there on how to solve that from a Reverse Shell on a End Of Life Operating System using an EXE exploit built with Pyinstaller. (Lots of Trial and Error and determination)
Microsoft Visual C++ 2008 Redistributable Package (or some other version depending on python version) is needed in any case, python27.dll requires it
I was also receiving an error about msvcr100.dll when ran from the GUI on my build machine(WinXP SP2). This is corrected in the 3.3 Dev version on GitHub.
I installed the C++ 2008 Package but this didn't solve my problem when I re-built the EXE, the 3.3 Dev Pyinstaller was the solution.
What I did was:
Zip down the Dev version of Pyinstaller 3.3 Dev(GitHub) is the newest for 11/14/16 that I could tell. Make sure you have Python 2.7.x (I used 2.7.11) and pywin32 installed that matches (Python 2.7.x) version. (And it does matter if its 64-bit or 32-bit) Use the setup.py to install Pyinstaller, make sure you do not have a previous version already installed, if so use pip or etc. to remove. I installed with pip first and this was my whole issue.
I was able to get all of my 32-bit Single EXE Exploits to run on 64-bit/32-bit Windows machines up to Windows 10.
Once that is completed, make sure Pyinstaller is in your $PATH and follow the standard tutorials on creating a --onefile EXE. Copy to your Windows Target machine and it should work with-out error. I did not need to pull any dependencies over but you may have to include some with the --hidden command. Its greatly detailed in the Pyinstaller documentation on how to include hidden .dlls
If this still doesn't work for you try using py2exe. Its a little more complicated but it your determined you will figure it out.
If you have code written in python 2.x.x and 3.x.x you can have multiple environments of Python and have Pyinstaller installed in each. This is in the documentation as well.
Thank you jim ying. Your 2 sentence answer was exactly what I needed.
I've been researching this for hours. I can't seem to get it to work.
The issues is that I'm on OSX10.10, running Python 3.3. Everything worked great on 10.9.
I'm not even sure how to test it. I've done just about every step that has been suggested. Making new symlinks, linking and unlinking with Homebrew. Doing a custom install.
I'm just stuck. Anyone been able to sort this out?
In summary, I've uninstalled Pillow (and therefore PIL) and then installed the libjpeg files. Then I reinstalled Pillow with PIP.
This issue is that the gist for Homebrew install Python 3.3 isn't working right. When I upgraded to Python 3.4 everything worked fine.
Recommend looking at this gist to revise and see what can be done to address this if you need 3.3
https://gist.github.com/dnozay/231a037d53e14052ccd6
Just recently I have begun to review the code for a project produced by a friend roughly 4 years ago. However, to compile this project I need an outdated version of Qt (version 3.3.8). Much of the code used in this project isn't supported in the same style as Qt4. So I'd first like to obtain Qt3 before I transition to Qt4.
Ubuntu has decided to no longer carry "qt3-dev-tools". Ubuntu has limited the selection to "qt4-dev-tools" in its repository. So installing via the command line option (sudo apt-get install qt3-dev-tools) results in an error:
"Unable to locate package qt3-dev-tools."
So, from here I did some digging for a manual installation? I found a great website to help me through the process, but I'm not very knowledgeable about Ubuntu, or Linux in general. Step 1 was simple. But step 2 and onward stumped me. I'm supposed to be both adding the environment variables listed in step two to the .profile file and then setting them, correct?
In step 2, is logging in again just meant for users with the .login shell? When I type in $HOME/.qt-license of step three, I suppose I'm typing this into the terminal?. Same with the ./configure? Both of these commands return no such file exists.
Does anyone know a better walk through to install Qt3 files, or can give a quick breakdown of this tutorial?
The website tutorial:
http://krm.am.gdynia.pl/doc/qt-3.3.8/INSTALL
If u can get .rpm package then open it in ubuntu software centre . It will get installed.
http://download.qt.io/archive/qt/3/ try downloading the package for qt3 from this qt archive & install it.
Hi I've tried to install the latest codelite but when I try to open it, it doesn't. I followed the instructions on the site but no luck.
I'm using openSUSE 13.2 64-bit
You probably need to install the wxWidgets runtime libs, which were supposed to be included in the CodeLite package but weren't.
openSUSE don't seem to have a meta-package for these, and there are a confusing number of choices, most of which will be wrong for you. However if you ask yast to install libwx_gtk2u_webview-suse-3_0-0 I think you'll find that will depend on the rest of the correct libwx* family.
At the time of this writing, you can install codelite and wxwidget in opensuste in a straightforward method. Just go to the
opensuse software repository and search for codelite. After representation of the results press on the button
Direct Install
to let you install the package on your machine.