I'm trying to understand what exactly all of these are and how they relate to each other (and most importantly, how to install them).
From what I've read, LIBs are libraries linked during the compilation of my project and DLLs are libraries linked during the runtime of my project.
So for me to use a LIB, I have to have the actual .LIB file somewhere in my computer, go to Project -> Properties -> VC++ Directories and add the path to the file in the Library Directories, and after this I have to go to Linker -> Input -> Additional Dependencies add the .lib name in there, and finally I need to type #include in my code, right?
So, some questions:
When I finish and build the release of my program, will the .exe only run if the target platform has the .lib installed in their PC as well? If yes, what steps do I need to do to make sure the .lib goes with the .exe?
When I get the source of a open source project, if I add them (using Add Existing Item...) to my project, can I use them just by using #include as if the files were mine and it would be the same as having the .lib installed? Or do I need to install the .lib file and still use these source files?
I have a project using OpenGL and I linked to glew32.lib, but I don't have the lib or any new directory added in the VC++ Directories, so I think this means I must've installed the .lib in the system folder or somewhere where the Visual Studio won't ask for another directory, should I worry about this when releasing a project?
How the above questions relate to DLLs and is there any reason why should I use DLLs over LIBs or the other way around?
I'm starting to use more and more libraries and I noticed I just dragged, copied and included it everywhere so I could use them but never really understood how they "fit" in the project. Especially those open source libraries where they provide so many files and I don't really know what to do with them...
You don't need to have LIB files along with your EXE file for running in another computer, LIB files are static files and DLL files are dynamic. So when you compile all static codes will be included in your EXE file, but DLL files will be loaded and used dynamically in runtime, so you just need to have your DLL files with your EXE file. This way, your code will work and run properly in other computers.
Just adding another project is not enough, you need to compile them and generate LIB files out of them. Then you add the generated LIB file to your final project and include external projects in your final binary. If you are compiling multiple projects together in a solution, you'll need to set project build order in solution properties in VS.
No, that's OK. It seems you've put LIB files in right folder and you don't need to have LIB file with your EXE file to run it in other computers.
DLLs are dynamic libraries, so you need to have them with your application. Installers usually install EXE files with DLL files in the same folder, so your app will run properly, but no need to include LIB files at all.
Also you can include LIB files like this:
#pragma comment(lib, "glew32.lib")
So you don't need to do it in project settings, but assuming you have your LIB file in "Library Directories" path.
Using DLL files can be done in two ways:
One is linking your application to DLL file and having DLL file's function entry in your EXE file's import table:
like using
#include <windows.h>
then
GetWindowsDirectory(windir, MAX_PATH);
So you'll have GetWindowsDirectory API entry in your EXE file's Import Table.
Also you can do it dynamically:
hinstDLL = LoadLibrary("kernel32.dll");
if (hinstDLL != NULL)
{
func_GetWindir = (DLLPROC) GetProcAddress(hinstDLL, "GetWindowsDirectoryA");
...
There is not much difference, only difference is:
In first method, as it's in your EXE file's Import Table, if there was no kernel32.dll or there was no GetWindowsDirectory entry in kernel32.dll, your EXE will not run at all, it will show a critical error and will not run. But in dynamic way (second way), your app will run, but as soon as your code try to use GetWindowsDirectoryA API, it will fail. You will have 0x00 in func_GetWindir. If you attempt to call it, then program will crash.
Related
I am working on a project that involves making a dynamic link library, so I want to test it in a console app in Visual Studio.
The DLL is also made in Visual Studio, it doesn't have much, just a few functions in it. I'm not sure if I'm just supposed to include the librarys header in the include directories panel in Properties, or do something else
A lot of people say I'm supposed to add its corresponding .lib file in the Library or Reference directory, but I'm not sure that VS generates a .lib file alongside the DLL. I'm using VS 2015.
I don't have VS in front of me this very moment, but these should be the general steps to set it up:
Properties->Linker->Input: your.lib
Properties->Linker->Additional Library Directories: ../your/bin
Properties->General->Compiler->Additional Include Directories: ../your/include
To build your app, the DLL's API headers must be in the include for the compile-time, it's LIB files in the bin for the link-time. Once you have your app EXE, all you need is the DLL to be in the same folder as your EXE when it executes.
You might also want to add the dll project and the app project into a common solution in VS and add (right click) Project Dependency from the app to the dll. This ensures correct order of building, assuming you are going to build the dll at all.
You can also do what I did.
You can create a Libs directory inside of your Solution directory.
You can then place your .DLL files inside of the Libs directory or some sub-directory inside of Libs
In my case, I added the entire SFML-2.3.2 directory in there, which included the source-code, .lib files, and .dll files.
I did link up what I could in the project properties, but I used Visual Studio's macros to fill in the path name to the Solution directory. Just in case I wanted to put this in version control and work on it from multiple machines.
Then I opened up the Project's Property Page.
Within the property page, I went to Build Events -> Post-Build Event -> Command Line
Within the Command Line, you can add a copy command that will copy any needed files into the same directory as the executable that will need them.
In my case I used: copy "$(SolutionDir)Libs\SFML-2.3.2\bin\*" "$(TargetDir)"
I could have written multiple commands to copy just the individual files that I needed, but I had spent a good three hours trying to get SFML to work without actually installing it.
I am trying to learn more about Multiplayer Modifications so i've downloaded the source code of San Andreas Multiplayer.
My problem is that the client project creates a .dll and a .lib files. I've searched on many sites how to implement them into a new project but i just did not find a clear answer.
So i am creating a new Visual C++ project where i need to implement the libraries resulted from SAMP Client compilation. Any help would be great :).
If you want you can join me in this project.
I don't know how SAMP dlls are but in general, this is how it works:
Linker need *.lib files. So you should copy lib files to your default lib directories or create a new directory under libraries of your project and copy them in it.
If the project you want to link have include files too, do what you did for lib files for include files too. Copy them to include directory.
Put DLLs in a directory that your application can reach. This can be your Debug folder or even it can be Windows or System32 directory. Choose where to put them on your own (it depends on many parameters. Pick one that fits you).
This link tells you how to put them in project directories.
That's it. You can call functions of the project you want to use. Tell me if you got problem.
I implemented the SFML library nightly build to my Visual Studio 2013, because the original one is not compatibile with this VS version. I done everything what is needed (added directory to include folder in both Debug and Release, added directory to .dll files), but it can't find the files in program. What else should be done to make this library work? Or should i consider changing Visual Studio to 2010?
You haven't given really to much information so I am just really guessing as to what the problem is.
added directory to .dll files
But that sounds like your problem right there. You don't add the directory that the .dll files are in to your project. The only directories you need to add to the project are the include directory and the library directory.
But anyways I am assuming you are using dynamic linking since otherwise you wouldn't be dealing with .dlls. Now different IDE's require that you place the .dlls in different spots but since you are dealing with VS2013 you need to copy whatever .dlls that you are using into the same folder where your program's compiled executable is (The .exe file).
Another option is to link statically instead of dynamically which I generally prefer to do on small projects but it is really up to the developer which he prefers.
When you link statically you don't need to include any .dlls. What you will need to do is recompile SFML's sources and make sure to build the library so it produces the static library files (They should be named something like sfml-graphics-s-d.lib for debug and sfml-graphics-s-d.lib for release).
Add that library directory which contains the static library files to your project and then link to them .lib files in VS's input window (Remember that -d is for the debug build).
Next you will need to add SFML_STATIC to your preprocessor options on both the release and debug build.
After that you are good to go and don't need to include the .dll files with your project. And again whether you choose to link dynamically or statically is really up to you and the project you are working on but for small projects I would suggest linking statically.
My problem is:
I have compiled LuaJit with VisualStudio and its genereated a .Obj file, a dll and .lib file.
i just want to link the .obj file in my win32 application to generate a single EXE file.
If its possible,i still need to add the Lua headers?
Thanks anyway.
Use the header file to define LuaJit symbols for your code that deals with Lua.
To link you only need the lib and dll. Add the lib file to your link dependencies under Project Properties > Linker > Input. Put the DLL next to your EXE when you run.
You need to make the project produce a .lib file containing the code (instead of in addition to the dll) and link that. It could be that you can by switching the project setting (look for one labelled lib, or static). Otherwise, you'll have to modify the project settings. (set output type to lib rather than dll).
I never tried linking a .obj file directly, it might be possible. Lib files are more standard.
I followed the MSDN walkthrough on creating and using a DLL in Visual C++ Studio, but it requires the user to add the DLL project to the same solution as the project they're working on.
Is there a simple way to include a DLL? Ideally, I'd like to just distribute my .dll (and the .lib, I suppose) to my friends so they can use it in their own projects.
I realize there are other walkthroughs out there (some of them on SO), but they all require editing the PATH environment variable, etc. Is that really the simplest way?
At a minimum, you need to do the following:
Include the .lib file in the project
Tell the linker where you put the .lib file (library search path)
Make the .dll file available at runtime (easiest is to put it in the same directory as the .exe)
To distribute the compiled .dll to your friends, you will need to include:
the .h file(s) for the compiler
the .lib file for the linker
the .dll file for runtime