I am using this code for display my page in page content in MURA 6.1
<div>[mura]$.dspInclude('display_objects/custom/main.cfm')[/mura]</div>
But it gives me the error below:
Note: If you wish to use an absolute template path (for example,
template="/mypath/index.cfm") with CFINCLUDE, you must create a
mapping for the path using the ColdFusion Administrator. Or, you can
use per-application settings to specify mappings specific to this
application by specifying a mappings struct to THIS.mappings in
Application.cfc. Using relative paths (for example,
template="index.cfm" or template="../index.cfm") does not require the
creation of any special mappings. It is therefore recommended that you
use relative paths with CFINCLUDE whenever possible. Could not find
the included template
/muraWRM/default/includes/display_objects/custom/main.cfm.
The physical path is
[siteid]/default\includes\themes\rescue\display_objects
Thanks in advance
This should work
<div>[mura]$.dspInclude('themes/rescue/display_objects/custom/main.cfm')[/mura]</div>
Your include is being called from the includes folder, so you need to include the themes folder and the rescue folder to get to the right path.
For consistency across themes, you might want to use Mura's setting for the theme name, but I would have to look that up.
If you are ok hard coding it, this should work just fine.
Related
This is CF11.
I have a collection of dependencies that I must cfinclude at the top of every CFM and CFC we run. It is a single cfinclude that recursively includes other files. This has worked on every page load for many years; mostly legacy CFM pages, and some newer CFCs. However, I've recently tried to do this from within an Application.cfc, and while it resolves the top-most include, it fails to resolve the children includes. I get the typical cfinclude relative-path error message:
... Note: If you wish to use an absolute template path (for example, template="/mypath/index.cfm") with
CFINCLUDE, you must create a mapping for the path using the ColdFusion Administrator. Or, you can use
per-application settings to specify mappings specific to this application by specifying a mappings
struct to THIS.mappings in Application.cfc. ...
From the CFC itself (called from the browser with URL x/index.cfm), I have:
getBaseTemplatePath() = x/index.cfm
getCurrentTemplatePath() = x/Application.cfc
expandPath("./") = x
And from the top-most include:
getBaseTemplatePath() = x/index.cfm
getCurrentTemplatePath() = y/TheInclude.cfm
expandPath("./") = x
Other CFCs in this application - those siblings of Application.cfc that cfinclude the same file - produce the same path expansions, but also successfully resolve the child includes. Am I doing something wrong, is this a bug in Application.cfc, or ...?
This is a bug and has been verified by Adobe.
Bug report CF-4207025.
Maybe it's the content of what is inside those includes.
Check this:
https://helpx.adobe.com/in/coldfusion/cfml-reference/application-cfc-reference/application-variables.html
I am trying to use mappings for the first time and I am having some issues. In my CFadmin I created a mapping which goes like this:
Logical Path:
/email_sender
Directory Path:
E:\sites\Example.Com\cf_modules\autoresponders\Emails\emailLists
I am trying to access the include file from a .cfc. Inside my cfc I have an include file which is in the same folder and it works just fine but that include file is tying to access another include file based on the information I am passing through.
The include file inside the component has this code in it.
<cfmail from="#emailData.sender#" to="#surveymain.email#" subject="#subject#" type="HTML" >
<cfinclude template="#emailData.includePath#" >
</cfmail>
Just to be more clear this is my total filesystem:
access.cfm -> some.cfc -> include_1 (works) -> include_2 (issue with
the path)
I have a try/catch which emails me the errors and it is located inside the include_1.
How can I use the mapping that I created to finally be able to access my include file?
Please note that after emailLists I have dynamic folders which change depending on which client I am trying to send the email to. So the end result of the path would be:
E:\sites\Example.Com\cf_modules\autoresponders\Emails\emailLists\client_A\email_template.cfm
I tried using my mapping by doing this
<cfinclude template="/email_sender/#emailData.includePath#" >
which gave me this error:
The path to the CFC must be specified as a full path, or as a relative
path from the current template, without the use of mappings.
Also, I tried including a full path in the cfinclude whic also resulted in the following error:
Note: If you wish to use an absolute template path (for example, >template="/mypath/index.cfm") with CFINCLUDE, you must create a
mapping for the path using the ColdFusion Administrator. Or, you can
use per-application settings to specify mappings specific to this
application by specifying a mappings struct to THIS.mappings in
Application.cfc. Using relative paths (for example,
template="index.cfm" or template="../index.cfm") does not require the
creation of any special mappings. It is therefore recommended that you
use relative paths with CFINCLUDE whenever possible.
Any help/suggestion would be much appreciated
Edit:
After restarting the server the version that worked was this one:
<cfinclude template="/email_sender/#emailData.includePath#" >
Thanks to those who replied.
Some questions, rather than some answers.
Did you set the mapping in CFAdmin or in Application.cfc?
What do you get if you run the code below?
#expandPath("/email_sender")#
What is the value of #emailData.includePath#?
What is the value of this: #expandPath("/email_sender#emailData.includePath#")#?
Can you provide us with the exact text of the error messages, rather than vaguely describing them.
What is the value of #fileExists(expandPath("/email_sender#emailData.includePath#"))#?
If you can update your question with that info, you'll either spot where you're going wrong, or we can help to work out what the story is
Something like this happened to me once before. Essentially we edited the xml file, rather than using the admin interface. It wasn't until our sys admin restarted the server until we realized why the mapping hadn't taken. So have you restarted the server since you added the mapping?
When I'd like to run idnex.cfm there is error "Could not find the included template".
I should use CF admin mappings, but there are a lot of such errors in different files.
So, is there the easier way to solve a problem?
Full error message:
Could not find the included template spiderBlock.cfm.
Note: If you wish to use an absolute template path (for example, template="/mypath/index.cfm") with CFINCLUDE, you must create a mapping for the path using the ColdFusion Administrator. Or, you can use per-application settings to specify mappings specific to this application by specifying a mappings struct to THIS.mappings in Application.cfc.
Using relative paths (for example, template="index.cfm" or template="../index.cfm") does not require the creation of any special mappings. It is therefore recommended that you use relative paths with CFINCLUDE whenever possible.
The error should also tell you WHICH template it can't find, including the path CF is looking for it on. Is that file at the location CF is looking for it? I suspect not.
If you start by giving us the full error message, we've got something to work with to make sensible comment on this.
As others have suggested there's a few ways the included file can be referenced in the including template: relative to its own location, absolutely from the CF root, or absolutely from a resolved mapping. So you might need to check your mappings as well (which'll be defined in CFAdmin or Application.cfc).
Note: If you wish to use an absolute template path (for example,
template="/mypath/index.cfm") with CFINCLUDE, you must create a
mapping for the path using the ColdFusion Administrator.
I went to the administration page but not sure what to put in here.
I'm pretty new to coldfusion. anyone got any ideas why this would be happening.
CFINCLUDE uses relative paths in relation to the file where the cfinclude is, so if want to include a file in another directory, 1. it has to be inside your wwwroot (or the root directory, or subdirectories) of your site, 2. you can go to other directories by doing ... hope this helps a little bit. If you want to include a file that is outside of your wwwroot, then you'll need to map that directory in Coldfusion Administrator using the same syntax above when you do include it.
To add a mapping, open your coldfusion administrator.
Server Settings > Mappings
There are 2 paths. Logical and Directory.
Logical can be anything you want, and directory is where it maps to.
eg. you might have a folder below your web root which stores email templates mapped as:
logical path: /emails
directory path: /var/www/mycfapp/content/includes/emails
You can <cfinclude template="/emails/forgotPass"> from any cf template and the mapping would get picked up.
You can use the mappings for new object creation too. Lets pretend forgotPass is a cfc.
fp = new emails.forgotPass();
// if you have funky characters in there, eg dash, just quote it.
fp = new "emails.forgot-pass"();
Mappings also work when extending cfcs. With one small exception. No leading slash.
component extends="emails/forgotPass" {
// ...
}
Im pretty sure mappings are detected first, so if you have a folder with the same name it might not get picked up.
In cf9 you can also specify your mappings in your Application.cfc, instead of coldfusion administrator, which affects all applications on your server. eg.
this.mappings["/emails"] = "/var/www/mycfapp/content/includes/emails";
You'll need to tick the Enable Per App Settings option on the cfadmin Settings page.
http://help.adobe.com/en_US/ColdFusion/9.0/Developing/WSc3ff6d0ea77859461172e0811cbec0b63c-7fd5.html
I am familiar with theming and using template hints in the Magento back office to locate .phtml files.
What I am not really familiar with are the core files such as app/code/core/Mage/Catalog/Model
What I need to do is override a core file like I would a core phtml file by copying it to 'my theme'.
I basically want to amend some labels which appear on the order summary page of the Magento checkout process - domain.com/checkout/cart/
I followed the trail to the phtml files using template hints. Within the app/design/frontend/default/mytheme/template/checkout/cart I found the code
renderTotals(); ?>
Now I managed, by accident, to stumble upon two of the files I wanted to change:
/httpdocs/app/code/local/Mage/Sales/Model/Quote/Address/Total/Grand.php
/httpdocs/app/code/local/Mage/Sales/Model/Quote/Address/Total/Shipping.php
I made local copies of these files (http://www.magentocommerce.com/wiki/how_to/how_to_create_a_local_copy_of_app_code_core_mage) to override the default labels, like I would if I was overriding a template file.
My question is, how can you locate core files which pertain to the 'stuff' you want to change, located in function calls such as renderTotals(); ?> in the phtml files?
Not being able to pinpoint stuff like I can with template hints is slowing me down, and I am struggling to find a solution as I am not up on all the vocab surrounding Magento yet.
Hope this makes sense and thanks in advance!
From the same settings page where you turn on Template Path Hints, also turn on the "Add Block Names to Hints" setting. This will show you PHP class names such as: Mage_Sales_Model_Quote_Address_Total_Grand to which you can deduce the folder path (underscores represent a subfolder, and the last piece represents the file name).
If you're getting a block such as Mage_Sales_Model_Quote_Address_Total_Default then sometimes it just takes a little common sense to see that it's pulling in other files from the same folder (such as Grand.php and Shipping.php). But there are generally only a couple files in the same folder, so this is pretty easy to see.
As Sid Vel said, a good Search Project functionality is helpful. But if you find yourself looking at Abstract.php of some class, often you need to look in a subfolder in that directory with the proper name to find the concrete implementations. But still, it gets you very close to where you need to be.
I always use Dreamweaver's site / directory search function. It will scan through all the files in the Core folder and tell you where the function is from. In your case, I would search for "renderTotals". You need to enable PHTML editing in Dreamweaver.
Most IDE's will allow this kind of search option. In Aptana you can Ctrl + Click on the function to open the file it is coming from. Magento takes ages to index itself on Aptana, due to its sheer size.