Summary:
I have an Office 365 E3 account where I'm trying to deploy a Word task pane app that will read some SharePoint list data. Right now, I'm just trying to get the task pane app to load, however, it shows the Office 365 login page (in the pane) but does not do anything after clicking Login.
Details:
I went through the instructions provided here:
http://msdn.microsoft.com/en-us/library/office/fp179815.aspx
Basically, I create an App for SharePoint configured as SharePoint-hosted, then in the same project, added an App for Office (Task Pane App for Word only). The SharePoint app also has a custom document library.
I am able to install the app to my App Catalog, and it correctly shows up in Site Contents where I see it being provisioned to the app web. I can also launch Word 2013 with the Trusted App Catalog configured correctly, and I am able to see my Task Pane App and insert it. When I click Insert, it loads it but prompts for credentials.
I am using the same credentials all throughout this exercise so by virtue of being able to install and deploy the SharePoint app, you can trust that I'm providing the right credentials.
It also appears the custom document library is never created - I wonder if both suffer from the same underlying issue.
I encountered the same problem and the solution provided in the answer below did not help.
After some desparation i created a taskpane app using the Napa Cloud App, opened the application in Visual Studio and went looking for differences.
In the Taskpane app manifest.xml file i found the following entries which were missing in my own application manifest:
<AppDomains>
<AppDomain>https://login.microsoftonline-int.com</AppDomain>
<AppDomain>https://login.microsoftonline.com</AppDomain>
</AppDomains>
This solved my problem and cured one horrible friday.
I was able to get this to work. It turns out doing a Deploy from Visual Studio (whether you right-clicked Deploy or F5-debug), the installation of the app isn't enough.
To make it work, I skipped doing a Deploy all together, but instead published my app. I then took the .app file and loaded it in my App Packages folder, and then deployed it from there.
Unfortunately, I don't know the difference between the two, but I'm assuming it has something to do with provisioning the app web for the Office App.
Related
I have a Sitecore 10.0 instance installed in azure pass, I am able to load the content editor however on loading the installation wizard from Sitecore desktop->development tools i get a blank screen, I observed the same with any other pop us such as user manager as well.
enter image description here
I tried comparing the config to a working instance that i have and also the dll's but i dont seem to find anything missing from that front.
I'm working with WSO2 Identity Server and I'm curious if there is a way to run the product in developer mode without building each component of identity server. I found a way to start the "My Account" component in dev mode by following this tutorial ( https://is.docs.wso2.com/en/5.11.0/develop/setting-up-my-account-in-a-dev-environment/ )
but I want to be able to modify different components such as recovery-portal and authentication-portal by forking and cloning the required github repositories and starting the entire app in developer mode in order to see the code changes in real-time.
AFAIK the developer mode will work only for the MyAccount and Console. You can refer to the doc for more details on that.
The recovery portal, the authentication portal etc. cannot be tried with the developer mode. However, there are two ways that you can try this.
Build the war files manually and add them to the WebApps directory. If the server is running, war file changes will automatically get deployed. If the server is not running, you have to delete the existing directory and restart the server.
You can do the changes to the JSPs that are deployed inside the pack. Once the changes are done, you can save the changes and the changes will automatically get deployed.
I'm pretty new to the Google Cloud Platform. I have deployed a Python 3 Flask app in AppEngine Flexible Environment using the Google Cloud SDK and the app works fine. I just want to view the source files deployed, in the cloud. Is there any way to view my project files in GCP?
You can view the source files by clicking on tools > debug next to the app version on your versions page
Alternative, you can go to your instances page, click on SSH next to one of the instances and you will enter the debug mode for that specific instance.
This will open a console in your browser and you can start a shell in the container that is running your app, as described here.
PS: apparently this is possible only for the Flexible Environment
I have an IIS site on a Windows 2012 R2 server. The site has an Application inside it:
The URL for this site is setup on our Active Directive servers as it is only accessible internally from our company. The URL follows the following structure:
http://NAMEoftheSERVICE.myCompanyServices.myCompany.local
The service for this site is placed in an internal folder:
http://NAMEoftheSERVICE.myCompanyServices.myCompany.local/InternalFolder/Service.svc
I have placed a number of test files both at the root level and in the internal folder:
http://NAMEoftheSERVICE.myCompanyServices.myCompany.local/HelloWorld.html
http://NAMEoftheSERVICE.myCompanyServices.myCompany.local/InternalFolder/HelloWorld.html
I can browse these files without any problems. However, I cannot browse the service at http://NAMEoftheSERVICE.myCompanyServices.myCompany.local/InternalFolder/Service.svc
The browser returns
However the file is there, and I have made sure there are no typos in the URL I put in the browser.
I have looked at similar questions but there seems not to be anything like the problem I am experiencing. The only question that looked promising was:
WCF service file not visible
But the answer for that post does not apply to my issue as I already have the configuration mentioned in that post setup as it is suggested.
I have checked the IIS-level config files for any exclusion regarding .svc files or anything similar, but could not find anyhting.
Have you got any suggestions on where to look at to solve this issue?
Solution: Install HTTP Activation feature
After running some more testing on other sites on the same server, I actually realised that the issue was specific to .svc files. I therefore made another search on Google and found that the server was missing the "HTTP Activation" feature (part of the WCF Services).
So, if you are having the same issue on .svc files follow the following steps to make sure you have the right components installed on the server:
Open Server Manager
In Server Manager, click the Manage menu, and then click Add Roles
and Features
In the Add Roles and Features wizard, click Next. Select the
installation type and click Next. Select the destination server and
click Next.
Skip the Server Roles page.
On the Select features page, expand ".Net Framework 4.5 Features",
expand "WCF Services" and select "HTTP Activation". Click Next.
On the Confirm installation selections page, click Install.
On the Results page, click Close.
The same can be achieved by running the following Powershell command:
Install-WindowsFeature -Name NET-WCF-HTTP-Activation45
This did the trick for me. I hope it can be of help to someone.
I just want know if somebody here already tried this tutorial:
https://docs.wso2.com/display/ESB490/Sending+a+Simple+Message+Through+the+ESB
I followed the instructions strictly but after I deployed my SampleCApp Composite Application project to carbon 4.4 based server(wso2esb-5.0.0), the SimpleStockQuoteProxy is nowhere to be located in the management console.
I hope you can help me with this especially those who have encountered this issue. I want to know, how did you fix this?
Thank you in advance.
What kind of OS are you using? If you are using Windows, unfortunately, it doesn't work. At least I haven't found a way to make it work through the Developer Studio.
But you can login into the management console, then in the Main tab, Carbon Applications, Add and upload your exported .car file. Refresh the List of Carbon Applications a few times until you see it there or until it shows the red message that the uploaded Carbon Application is faulty. You can click on the message and remove the faulty application, if this happens.
You can export the file by right-clicking on the Composite Application Project in the Developer studio and selecting Export Composite Application Project.