Soap UI load testing - web-services

I want to call the webservice multiple times passing different parameter,
e.g. getDetail(Id) , by reading the ids from an excel sheet or a constant.
I understand you can do this by writing groovy script in SoapUI, does anyone have a working example to start with.
PS: I am using the free SoapUI version and not SoapUI Pro.

One way to achieve this would be to have Test Case with 3 steps.
The first one: a groovy script step that does something like this:
['111', '222', '333'].each {
com.eviware.soapui.SoapUI.globalProperties.setPropertyValue('id', it)
testRunner.runTestStepByName("testRequest")
}
testRunner.gotoStepByName('done')
Secondly the Test Request step. Inside the request you can refer to the id parameter by ${id}
and thirdly an empty Groovy script step 'done' for jumping out of there.
Instead of the static list you can get the test ids from a file.

We achieve this by using a groovy script step at the start of our test:
switch (context.ThreadIndex) {
case 0: context.Id = 'id for thread 1 here'; break;
case 1: context.Id = 'id for thread 2 here'; break;
...
default:
log.error 'Thread['+context.ThreadIndex+'] Run['+context.RunCount+']: no Id available for assignment'
}

Related

If statement inside cypress.io test

I'm new to testing and to cypress.io in particular, and I'm trying to test the registering flow in my app.
I want to check two scenarios -
If the user is trying to register with an existing username, an error message should be popping up
Else if proper inputs are inserted, the username is successfully registered
How can I do so in one test? Is there an option to use if statement with cypress?
Thanks a lot in advance.
You can do something like:
If(Cypress.$(‘error msg locator’).length > 0) {
//error msg displayed.Do something
}
else {
//success login.Do something
}

Store Data from Postman request in variables to use in tests

Im currently trying to get used to POSTMAN and i was wondering if there is a way to store variables from my request JSON Body via Pre Request in some environment variable so ican resuse it in the tests for response value cheks
This is how my json File might look like
{
"text" : "myText",
"attachments": {
"text": "myText2",
"anotherText" : "myText3"
}
So i want to get all Values, store them in a variable before sending my request, and then test if they match the expected value in my response
(example: myText2 gets mapped to green, myText3 gets mapped to red and so on)
That would make it possible to write one test for several request
Thanks a lot!
You can write the following in your script:
let body = JSON.parse(pm.request.body);
_.forEach(body, (value, key) => pm.environment.set(key, JSON.stringify(value)));
This will set each key and it's associated value as an environment variables.
Note you'll need to JSON.parse the value in the test script before using it for testing.
For eg in your test script you'll need to do something like this:
let attachments = JSON.parse(pm.environment.get('attachments'));
pm.test('All attachments are of correct value', function () {
// ...write your test here using the `attachments` variable
});

Is a Cache mock called more than once when browser-testing?

I'm trying to cover the following:
I'm using the following test code:
public function test_it_deletes_a_patient()
{
// ...
$cacheKey = vsprintf('%s.%s', [$this->doctorUser->id, 'backoffice.stats.patientsTotalCount']);
Cache::shouldReceive('has')->with($cacheKey)->once()->andReturn(false);
Cache::shouldReceive('increment')->with($cacheKey, -1)->once()->andReturn(true);
$response = $this->json('DELETE', route('patients.destroy', $this->patient), ['confirmation' => 'ELIMINAR']);
// ...
}
That triggers the following controller code:
public function destroy(Patient $patient, Request $request)
{
$this->authorize('delete', $patient);
$confirmation = $request->get('confirmation');
if ($confirmation != 'ELIMINAR') {
return response()->json(['success' => false]);
}
logger()->info("Deleting Patient Profile PATIENT_ID:[{$patient->id}]");
$patient->delete();
$this->updatePatientsCount(-1);
return response()->json(['success' => true]);
}
protected function updatePatientsCount($amount = 1)
{
$key = vsprintf('%s.%s', [auth()->user()->id, 'backoffice.stats.patientsTotalCount']);
if (Cache::has($key)) { // I want to mock for testing this
Cache::increment($key, $amount); // I want to mock for testing this
}
}
After test run I get:
alariva#trinsic:~/fimedi$ t --filter=test_it_deletes_a_patient
PHPUnit 7.3.1 by Sebastian Bergmann and contributors.
F 1 / 1 (100%)
Time: 6.53 seconds, Memory: 26.00MB
There was 1 failure:
1) Tests\Browser\Backoffice\PatientsTest::test_it_deletes_a_patient
Unable to find JSON fragment
["success":true]
within
[{"exception":"Mockery\\Exception\\NoMatchingExpectationException","file":"\/home\/alariva\/fimedi\/vendor\/mockery\/mockery\/library\/Mockery\/ExpectationDirector.php","line":92,"message":"No matching handler found for Mockery_0_Illuminate_Cache_CacheManager::has('2056e535e689ab723b3f44831b488f05f7fb8b90'). Either the method was unexpected or its arguments matched no expected argument list for this method\n\n","trace":[{"class":"App\\Http\\Middleware\\Language","file":"\/home\/alariva\/fimedi\/vendor\/laravel\/framework\/src\/Illuminate\/Pipeline\/Pipeline.php","function":"handle","line":151,"type":"->"},{"class":"Barryvdh\\Debugbar\\Middleware\\InjectDebugbar","file":"\/home\/alariva\/fimedi\/vendor\/laravel\/framework\/src\/Illuminate\/Pipeline\/Pipeline.php","function":"handle","line":151,"type":"->"},{"class":"Illuminate\\Auth\\Middleware\\Authenticate","file":"\/home\/alariva\/fimedi\/vendor\/laravel\/framework\/src\/Illuminate\/Pipeline\/Pipeline.php","function":"handle","line":151,"type":"->"},{"class":"Illuminate\\Cookie\\Middleware\\AddQueuedCookiesToResponse","file":"\/home\/alariva\/fimedi\/vendor\/laravel\/framework\/src\/Illuminate\/Pipeline\/Pipeline.php","function":"handle","line":151,"type":"->"},{"class":"Illuminate\\Cookie\\Middleware\\EncryptCookies","file":"\/home\/alariva\/fimedi\/vendor\/laravel\/framework\/src\/Illuminate\/Pipeline\/Pipeline.php","function":"handle","line":151,"type":"->"},{"class":"Il
What I interpret after a couple of tests, is that it looks like once I mock Cache it is being called by some middlewares before reaching the tested block, so since those called methods are not mocked, the test fails because it does not know what to answer for those middleware calls.
Imagine I could successfully mock all the calls before getting to the tested codeblock, I would be able to make it reach. But that's not the way to go over it.
How can I mock Cache and avoid failure due to previous Cache calls that I'm not testing?
EDIT: I realized after getting to a solution that this is a misleading question. My actual need was:
How can I successfully cover those lines?
Sidenote: if I try to disable middlewares ($this->withoutMiddleware();) I get an AccessDeniedHttpException
alariva#trinsic:~/fimedi$ t --filter=test_it_deletes_a_patient
PHPUnit 7.3.1 by Sebastian Bergmann and contributors.
F 1 / 1 (100%)
Time: 12.95 seconds, Memory: 24.00MB
There was 1 failure:
1) Tests\Browser\Backoffice\PatientsTest::test_it_deletes_a_patient
Unable to find JSON fragment
["success":true]
within
[{"exception":"Symfony\\Component\\HttpKernel\\Exception\\AccessDeniedHttpException","file":"\/home\/alariva\/fimedi\/vendor\/laravel\/framework\/src\/Illuminate\/Foundation\/Exceptions\/Handler.php","line":201,"message":"This action is unauthorized.","trace":[{"class":"App\\Exceptions\\Handler","file":"\/home\/alariva\/fimedi\/vendor\/laravel\/framework\/src\/Illuminate\/Routing\/Pipeline.php","function":"render","line":83,"type":"->"},{"class":"Illuminate\\Foundation\\Exceptions\\Handler","file":"\/home\/alariva\/fimedi\/app\/Exceptions\/Handler.php","function":"render","line":65,"type":"->"},{"class":"Illuminate\\Foundation\\Exceptions\\Handler","file":
Maybe I can cherry-pick middlewares to disable?
I managed to cover the controller's method by encapsulating the custom Cache operation into a macro, so as to get the benefits of spliting into code units.
I moved my code into a macro (in the boot() of a service provider):
Cache::macro('incrementExisting', function($key, $amount) {
if (Cache::has($key)) {
Cache::increment($key, $amount);
}
return $this;
});
I refactored to use the macro
protected function updatePatientsCount($amount = 1)
{
$key = vsprintf('%s.%s', [auth()->user()->id, 'backoffice.stats.patientsTotalCount']);
Cache::incrementExisting($key, $amount);
}
I could get the desired coverage while I can still test the refactored code with unit testing.
Update I
Regarding the concern of handling many calls that are not mocked, I just learned from Adam Wathan that there exists shouldIgnoreMissing() and that would allow to use the Mocking approach for this case.
Update II
Write your tests first. When doing so it gets easier to avoid hard-to-test code.

jenkins workflow regex

I'm making my first steps in the Jenkins workflow (Jenkins ver 1.609.1)
I need to read a file, line by line, and then run regex on each line.
I'm interested in the regex "grouping" type, however "project" and "status" variables (the code below) get null value in Jenkins . Any suggestions what is wrong and how to fix it ?
def line = readFile (file)
def resultList = line.tokenize()
for(item in resultList ){
(item =~ /(\w+)=(\w+)$/).each { whole, project, status ->
println (whole)
println (project)
println (status)
}
}
each with a closure will not work: JENKINS-26481
If something using advanced language features works in standalone Groovy but not in Workflow, try just encapsulating it in a method marked #NonCPS. This will effectively run it as a “native” method. Only do this for code you are sure will run quickly and not block on I/O, since it will not be able to survive a Jenkins restart.
Well,
After checking out some other regex options I came around with the following solution that seems working :
def matcher = item =~ /(?<proj>\w+)=(?<status>\w+)/
if( matcher.matches() ) { etc...}

Unit testing rendered Json with JsonBuilder in Grails

Let's say I have a simple action in my controller that ends with:
render(contentType: "text/json") {
message = 'some text'
foo = 'bar'
}
It renders correctly, as per the JSON builder documentation. However, when I attempt to unit test that response in a ControllerUnitTest, I get a blank string with controller.response.contentAsString. I even tried controller.renderArgs, but that just contains contentType: "text/json".
When I convert the JSON to a map, and marshall it as JSON, then I can test properly. But is there a way to unit test the code as it stands?
you have to call the action in your tests and compare the results using controller.response.contentAsString
so your test method would look like
void testSomeRender() {
controller.someRender()
assertEquals "jsonString", controller.response.contentAsString
}
Take a look at this blog post http://www.lucasward.net/2011/03/grails-testing-issue-when-rendering-as.html
After much searching, I found that this is not possible in 1.3.7. Either have to upgrade to Grails 2.0, or override the controller metaClass as suggested in this post:
controller.class.metaClass.render = { Map map, Closure c ->
renderArgs.putAll(map)
switch(map["contentType"]) {
case null:
break
case "application/xml":
case "text/xml":
def b = new StreamingMarkupBuilder()
if (map["encoding"]) b.encoding = map["encoding"]
def writable = b.bind(c)
delegate.response.outputStream << writable
break
case "text/json":
new JSonBuilder(delegate.response).json(c)
break
default:
println "Nothing"
break
}
}