Related
I am just starting to learn OpenGL today from this tutorial: http://openglbook.com/the-book/
I got to chapter 2, where I draw a triangle, and I understand everything except VAOs (is this acronym OK?). The tutorial has this code:
glGenVertexArrays(1, &VaoId);
glBindVertexArray(VaoId);
While I understand that the code is necessary, I have no clue what it does. Although I never use VaoId past this point (except to destroy it), the code does not function without it. I am assuming this is because it is required to be bound, but I don't know why. Does this exact code just need to be part of every OpenGL program? The tutorial explains VAOs as:
A Vertex Array Object (or VAO) is an object that describes how the vertex attributes are stored in a Vertex Buffer Object (or VBO). This means that the VAO is not the actual object storing the vertex data, but the descriptor of the vertex data. Vertex attributes can be described by the glVertexAttribPointer function and its two sister functions glVertexAttribIPointer and glVertexAttribLPointer, the first of which we’ll explore below.
I don't understand how the VAO describes the vertex attributes. I have not described them in any way. Does it get the information from the glVertexAttribPointer? I guess this must be it. Is the VAO simply a destination for the information from glVertexAttribPointer?
On a side note, is the tutorial I am following acceptable? Is there anything I should watch out for or a better tutorial to follow?
"Vertex Array Object" is brought to you by the OpenGL ARB Subcommittee for Silly Names.
Think of it as a geometry object. (As an old time SGI Performer programmer, I call them geosets.) The instance variables/members of the object are your vertex pointer, normal pointer, color pointer, attrib N pointer, ...
When a VAO is first bound, you assign these members by calling
glEnableClientState(GL_VERTEX_ARRAY); glVertexPointer...;
glEnableClientState(GL_NORMAL_ARRAY); glNormalPointer...;
and so on. Which attributes are enabled and the pointers you supply are stored in the VAO.
After that when you bind the VAO again, all the those attributes and pointers also become current. So one glBindVertexArray call is equivalent to all the code previously needed to set up all the attributes. It's handy for passing geometry around between functions or methods without having to create your own structs or objects.
(One time setup, multiple use is the easiest way to use VAOs, but you can also change attributes just by binding it and doing more enable/pointer calls. VAOs are not constants.)
More info in response to Patrick's questions:
The default for a newly created VAO is that it's empty (AFAIK). No geometry at all, not even vertexes, so if you try to draw it, you'll get an OpenGL error. This is reasonably sane, as in "initialize everything to False/NULL/zero".
You only need to glEnableClientState when you set things up. The VAO remembers the enable/disable state for each pointer.
Yes the VAO will store glEnableVertexAttribArray and glVertexAttrib. The old vertex, normal, color, ... arrays are the same as attribute arrays, vertex == #0 and so on.
I always think about VAO as an array of data buffers used by OpenGL. Using modern OpenGL you will create a VAO and Vertex Buffer Objects.
//vaoB is a buffer
glGenVertexArrays(1, vaoB); //creates one VAO
glBindVertexArray(vao.get(0));
glGenBuffers(vbo.length, vbo, 0); //vbo is a buffer
glBindVertexArray(vao.get(1));
glGenBuffers(vbo1.length, vbo1, 0); //vbo1 is a buffer
glBindVertexArray(vao.get(2));
glGenBuffers(vbo2.length, vbo2, 0); //vbo2 is a buffer
The next step is to bind data to a buffer:
glBindBuffer(GL_ARRAY_BUFFER, vbo[0]);
glBufferData(GL_ARRAY_BUFFER,vertBuf.limit()*4, vertBuf, GL_STATIC_DRAW); //vertf buf is a floatbuffer of vertices
At this point OpenGL Sees:
Now we can use glVertexAttribPointer to tell OpenGL what the data in the buffer represents:
glBindBuffer(GL_ARRAY_BUFFER, 0); //bind VBO at 0
glVertexAttribPointer(0, 3, GL_FLOAT, false, 0, 0); //each vertex has 3 components of size GL_FLOAT with 0 stride (space) between them and the first component starts at 0 (start of data)
OpenGL now has the data in the buffer and knows how the data is organized into vertices. The same process can be applied to texture coordinates etc but for texture coordinates there would be two values.
glBindBuffer(GL_ARRAY_BUFFER, vbo[1]);
glBufferData(GL_ARRAY_BUFFER,coordBuf.limit()*4, coordBuf, GL_STATIC_DRAW);
glVertexAttribPointer(0, 2, GL_FLOAT, false, 0, 0);
Next you can bind texture and draw arrays, you will want to create a Vert and Frag shader, compile and attach it to a program (not included here).
glActiveTexture(textureID); //bind our texture
glBindTexture(GL_TEXTURE_2D, textureID);
glDrawArrays(GL_TRIANGLES,0,6); //in this case 6 indices are used for two triangles forming a square
Vertex Array Objects are like macros in word processing programs and the like. A good description is found here.
Macros just remember the actions you did, such as activate this attribute, bind that buffer, etc. When you call glBindVertexArray( yourVAOId ), it simply replays those attribute pointer bindings and buffer bindings.
So your next call to draw uses whatever was bound by the VAO.
VAO's don't store vertex data. No. The vertex data is stored in a vertex buffer or in an array of client memory.
VAO is an object that represents the vertex fetch stage of the OpenGL pipeline and is used to supply input to the vertex shader.
You can create vertex array object like this
GLuint vao;
glCreateVertexArrays(1, &vao);
glBindVertexArray(vao);
First let' do a simple example. Consider such an input parameter in a shader code
layout (location = 0) in vec4 offset; // input vertex attribute
To fill in this attribute we can use
glVertexAttrib4fv(0, attrib); // updates the value of input attribute 0
Although the vertex array object stores these static attribute values for
you, it can do a lot more.
After creating vertex array object we can start filling in its state. We will ask OpenGL to fill it automatically using the data stored in a buffer object that we supply. Each vertex attribute gets to fetch data from a buffer bound to one of several vertex buffer bindings. For this end we use glVertexArrayAttribBinding(GLuint vao, GLuint attribindex, GLuint bindingindex). Also we use the glVertexArrayVertexBuffer() function to bind a buffer to one of the vertex buffer bindings. We use the glVertexArrayAttribFormat() function to describe the layout and format of the data, and finally we enable automatic filling of the attribute by calling glEnableVertexAttribArray().
When a vertex attribute is enabled, OpenGL will feed data to the vertex shader based on the format and location information you’ve provided with
glVertexArrayVertexBuffer() and glVertexArrayAttribFormat(). When
the attribute is disabled, the vertex shader will be provided with the static information you provide with a call to glVertexAttrib*().
// First, bind a vertex buffer to the VAO
glVertexArrayVertexBuffer(vao, 0, buffer, 0, sizeof(vmath::vec4));
// Now, describe the data to OpenGL, tell it where it is, and turn on automatic
// vertex fetching for the specified attribute
glVertexArrayAttribFormat(vao, 0, 4, GL_FLOAT, GL_FALSE, 0);
glEnableVertexArrayAttrib(vao, 0);
And code in a shader
layout (location = 0) in vec4 position;
After all you need to call to glDeleteVertexArrays(1, &vao).
You can read OpenGL SuperBible to understand it better.
I was trying to understand this as well and now that I think I do, it would be prudent to post a code example aimed at
people less familiar with OpenGL architecture, as I found the previous examples not very illuminating and most tutorials
just tell you to copy paste the code without explaining it.
(This is in C++ but the code can be easily translated to C)
In this example, we'll be rendering a rectangle, which has 4 vertices. Each vertex has a position (vec3, xyz), texture coordinate (vec2, uv) and color attribute (vec4, rgba).
I think it's cleanest to separate each attribute into their own array:
float positions[] = {
+0.5, +0.5, 0,
+0.5, -0.5, 0,
-0.5, -0.5, 0,
-0.5, +0.5, 0
};
float colors[] = {
1, 1, 1, 1,
1, 1, 1, 1,
1, 1, 1, 1,
1, 1, 1, 1
};
float tex_coords[] = {
0, 0,
0, 1,
1, 1,
1, 0
};
Our vertex array object will describe the four vertices with these properties.
First, we need to create the vertex array:
GLuint vertex_array;
glGenVertexArrays(1, &vertex_array);
Each vertex array has a number of buffers, these can be thought of as properties of the array. Each vertex array has an
arbitrary number of "slots" for the buffers. Along with which buffer is in which slot, it saves the CPU-side pointer to
the data for the buffer, and the CPU-side datas format. We need to make OpenGL aware of both which slot to use, where the
data is, and how it is formatted.
The buffers slots are indexed, so the first buffer is index 0, the second is 1, etc.
These locations correspond to the layout defined in the vertex shader:
// vertex shader
std::string _noop_vertex_shader_source = R"(
#version 420
layout (location = 0) in vec3 _position_3d; // slot 0: xyz
layout (location = 1) in vec4 _color_rgba; // slot 1: rgba
layout (location = 2) in vec2 _tex_coord; // slot 2: uv
out vec2 _vertex_tex_coord;
out vec4 _vertex_color_rgba;
void main()
{
gl_Position = vec4(_position_3d.xy, 1, 1); // forward position to fragment shader
_vertex_color_rgba = _color_rgba; // forward color to fragment shader
_vertex_tex_coord = _tex_coord; // forward tex coord to fragment shader
}
)";
We see that the position property is at location 0, the color property at 1 and the tex coords at 2. We'll store these
for clarity:
// property locations from our shader
const auto vertex_pos_location = 0;
const auto vertex_color_location = 1;
const auto vertex_tex_coord_location = 2;
We now need to tell OpenGL the information about each buffer outlined above:
// bind the array, this makes OpenGL aware that we are modifying it with future calls
glBindVertexArray(vertex_array);
// create the position buffer
glGenBuffers(1, &position_buffer);
// bind the buffer so opengl knows we are currently operating on it
glBindBuffer(GL_ARRAY_BUFFER, position_buffer);
// tell opengl where the data pointer is
glBufferData(GL_ARRAY_BUFFER, sizeof(positions), positions, GL_STATIC_DRAW);
// tell opengl how the data is formatted
glVertexAttribPointer(vertex_pos_location, 3, GL_FLOAT, GL_FALSE, 0, (void*) 0);
// tell opengl that this slot should be used
glEnableVertexAttribArray(vertex_pos_location);
Here, we generate a buffer that will hold our position data. For glVertexAttribPointer, we choose the
correct location, 3 elements (as the positions are xyz coordinates), and no offset or stride.
Because we have a separate array for all our properties, we can leave both as 0.
Similar to the position, we generate and fill the buffers for the color and tex coord property:
// color
glGenBuffers(1, &color_buffer); // generate
glBindBuffer(GL_ARRAY_BUFFER, color_buffer); // bind
glBufferData(GL_ARRAY_BUFFER, sizeof(colors), colors, GL_STATIC_DRAW); // set pointer
glVertexAttribPointer(vertex_color_location, 4, GL_FLOAT, GL_FALSE, 0, (void*) 0); // set data format
glEnableVertexAttribArray(vertex_color_location); // enable slot
// tex coords
glGenBuffers(1, &tex_coord_buffer);
glBindBuffer(GL_ARRAY_BUFFER, tex_coord_buffer);
glBufferData(GL_ARRAY_BUFFER, sizeof(tex_coords), tex_coords, GL_STATIC_DRAW);
glVertexAttribPointer(vertex_tex_coord_location, 2, GL_FLOAT, GL_FALSE, 0, (void*) 0);
glEnableVertexAttribArray(vertex_tex_coord_location);
Where we chose 4 elements for the colors because they are in RGBA format and 2 for the tex coords for obvious reasons.
The last thing we need to render a vertex array is an element buffer. These can be thought of as a list of
indices that define which order the vertices will be rendered in. For us, we want to render the
rectangle as two tris in a triangle fan, so we choose the following element buffer:
// vertex order
static uint32_t indices[] = {
0, 1, 2, 1, 2, 3
};
glGenBuffers(1, &element_buffer); // generate
glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, element_buffer); // bind
glBufferData(GL_ELEMENT_ARRAY_BUFFER, sizeof(indices), indices, GL_STATIC_DRAW) // set pointer
We do not need to enable the element buffers slot, it is separate from the vertex array. We don't have to specify the format of the elements buffer here, that will be done during glDrawElements in the render step.
So why all this? All these functions tell OpenGL where to look for the data for the vertices. Specifying the pointers to
the correct buffer data and their layout, if we now bind the vertex array during a render step:
glUseProgram(shader.get_program_id()); // shader program with our vertex shader
glBindVertexArray(vertex_array);
glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, element_buffer);
glDrawElements(GL_TRIANGLES, 6, GL_UNSIGNED_INT, 0);
Where 6 is the number of elements in the element buffer.
This is all that's needed to correctly update the in values in the vertex shader. OpenGL will move the data from
our CPU-side positions, colors and tex_coords into the correct locations 0, 1 and 2 of the vertex shader respectively.
We don't need to bind anything else, the vertex array remembers what we gave it and does it for us, which is why it's convenient and should be preferred in modern OpenGL.
In summary:
Each vertex array has n buffers for arbitrary properties and 1 element buffer. For each property / buffer, we need to
a) generate it (glGenBuffers)
b) bind it (glBindBuffer(GL_ARRAY_BUFFER)
c) tell OpenGL where the data is located in RAM (glBufferData)
d) tell OpenGL how the data is formatted (glVertexAttribPointer)
e) tell OpenGL to use that slot (glEnableVertexAttribArray)
for the element buffer, we only need to generate it, bind it to GL_ELEMENT_ARRAY_BUFFER, then tell opengl
where the data is.
Hopefully that helped shed some light on things. I'm almost positive there will be factual errors in this post as
I'm also mostly new to OpenGL but this was the way I conceptualized it to get my code working.
I am trying to render two different vertex collections on top of one another. Right now, my main loop renders one correctly when it's by itself, and the other correctly when it's by itself, but when I call both of my draw functions, I see a blank window. Why might this be happening?
The first draw call uses one shader, while the second draw call uses a different one. I don't clear the screen in between.
If it makes the code more clear, my shader programs are stored as class variables, as are the texture IDs after they're loaded elsehwere in my program.
This is my main loop:
while (true)
{
// Clear the colorbuffer
glClearColor(0.2f, 0.3f, 0.3f, 1.0f);
glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
drawModel1(); // This works when drawModel2() is commented out
drawModel2(); // This works when drawModel1() is commented out
// Unbind buffer
glBindBuffer(GL_ARRAY_BUFFER, 0);
// Swap the screen buffers
glfwSwapBuffers(_window);
}
My drawModel1() function renders points:
void drawModel1()
{
// Use the image shader
_img_shader.use();
// Feed the position data to the shader
glBindBuffer(GL_ARRAY_BUFFER, _img_pos_VBO);
glVertexAttribPointer(0, 3, GL_FLOAT, GL_FALSE, 3 * sizeof(GLfloat), (GLvoid*)0);
glEnableVertexAttribArray(0);
// Feed the color data to the shader
glBindBuffer(GL_ARRAY_BUFFER, _img_color_VBO);
glVertexAttribPointer(1, 3, GL_UNSIGNED_BYTE, GL_TRUE, 3 * sizeof(GLubyte), (GLvoid*)0);
glEnableVertexAttribArray(1);
// Set the projection matrix in the vertex shader
GLuint projM = glGetUniformLocation(_img_shader.program(), "proj");
glm::mat4 proj = _ndc * _persMat;
glUniformMatrix4fv(projM, 1, GL_TRUE, glm::value_ptr(proj));
// Set the view matrix in the vertex shader
GLuint viewM = glGetUniformLocation(_img_shader.program(), "view");
glUniformMatrix4fv(viewM, 1, GL_TRUE, glm::value_ptr(_viewMat));
// Draw the points
glBindVertexArray(_img_VAO);
glDrawArrays(GL_POINTS, 0, _numImageVertices);
// Disable attributes
glDisableVertexAttribArray(0);
glDisableVertexAttribArray(1);
}
And my drawModel2() function renders indexed triangles:
void drawModel2()
{
_model_shader.use();
// Load the mesh texture
GLuint texID = _loaded_textures.at(mesh.tex_file());
glActiveTexture(GL_TEXTURE0);
glBindTexture(GL_TEXTURE_2D, texID);
glUniform1i(glGetUniformLocation(_model_shader.program(), "texture_img"), 0);
// Set the proj matrix in the vertex shader
GLuint nvpmM = glGetUniformLocation(_model_shader.program(), "npvm");
glm::mat4 npvm = _ndc * _persMat * _viewMat * mat;
glUniformMatrix4fv(nvpmM, 1, GL_FALSE, glm::value_ptr(npvm));
// Feed the position data to the shader
glBindBuffer(GL_ARRAY_BUFFER, mesh.pos_VBO());
GLuint pos_att = glGetAttribLocation(_model_shader.program(), "position");
glEnableVertexAttribArray(pos_att);
glVertexAttribPointer(pos_att, 3, GL_FLOAT, GL_FALSE, 3 * sizeof(GLfloat), (GLvoid*)0);
// Feed the texture coordinate data to the shader
glBindBuffer(GL_ARRAY_BUFFER, mesh.tex_VBO());
GLuint tex_coord_att = glGetAttribLocation(_model_shader.program(), "texCoords");
glEnableVertexAttribArray(tex_coord_att);
glVertexAttribPointer(tex_coord_att, 2, GL_FLOAT, GL_FALSE, 2 * sizeof(GLfloat), (GLvoid*)0);
// Draw mesh
glBindVertexArray(mesh.VAO());
glDrawElements(GL_TRIANGLES, mesh.numIndices(), GL_UNSIGNED_SHORT, (void*)0);
// Disable attributes
glDisableVertexAttribArray(0);
glDisableVertexAttribArray(1);
// Release resources
glBindTexture(GL_TEXTURE_2D, 0);
}
You need to bind your vertex arrays at the start of your function, not right before the draw call itself. The Vertex Array is responsible for maintaining the state associated with a given object[-type] and any calls made that will setup state (like glVertexAttribPointer or glEnableVertexAttribArray) will be maintained on that Vertex Array. What you were essentially doing with your old code is that you were setting up state for your object, then switching to an entirely different VAO, then drawing, which meant model1 was using model2's bindings and setup, and vice-versa. Unless they have identical rules and setups, it's extremely unlikely that they'll both draw.
Incidentally, because VAO's store state, the only things that need to be in your draw calls are the draw call itself, and any data that changed that frame. So you'll want to consider spending some time refactoring your code, as it looks like most of those settings (like buffer binding) don't change on a frame-by-frame basis.
I'm trying to implement a batch-rendering system using OpenGL, but the triangle I'm trying to render doesn't show up.
In the constructor of my Renderer-class, I'm initializing the VBO and VAO and also load my shader program (this does work, so the error can't be found here). The VBO is supposed to be capable of holding the maximum amount of vertices I'll permit which is defined in the header to be 30000. The VAO contains the information about how the data that I'll store in that buffer is laid out - in this case I use a struct called VertexData which only contains a 3D-vector ('vertex'), but will also contain stuff like colors etc. later on. So I create the buffer with the size I already stated, don't fill in any content yet and provide the layout using 'glVertexAttribPointer'. The '_vertexCount', as the name implies, counts the amount of vertices currently stored inside that buffer for drawing purposes.
The constructor of my Renderer-class (note that every private member variable defined in the header file starts with an _ ):
Renderer::Renderer(std::string vertexShaderPath, std::string fragmentShaderPath) {
_shaderProgram = ShaderLoader::createProgram(vertexShaderPath, fragmentShaderPath);
glGenBuffers(1, &_vbo);
glGenVertexArrays(1, &_vao);
glBindVertexArray(_vao);
glBindBuffer(GL_ARRAY_BUFFER, _vbo);
glEnableVertexAttribArray(0);
glBufferData(GL_ARRAY_BUFFER, RENDERER_MAX_VERTICES * sizeof(VertexData), NULL, GL_DYNAMIC_DRAW);
glVertexAttribPointer(0, 3, GL_FLOAT, GL_FALSE, 0, (const GLvoid*) 0);
glDisableVertexAttribArray(0);
glBindBuffer(GL_ARRAY_BUFFER, 0);
glBindVertexArray(0);
_vertexCount = 0;
}
Once the initization is done, to render anything, the 'begin' procedure has to be called during the main-loop. This gets the current buffer with write permissions to fill in the vertices that should be rendered in the current frame:
void Renderer::begin() {
glBindBuffer(GL_ARRAY_BUFFER, _vbo);
_buffer = (VertexData*) glMapBuffer(GL_ARRAY_BUFFER, GL_WRITE_ONLY);
}
After beginning, the 'submit' procedure can be called to add vertices and their corrosponding data to the buffer. I add the data to the location in memory the buffer currently points to, then advance the buffer and increase the vertexcount:
void Renderer::submit(VertexData* data) {
_buffer = data;
_buffer++;
_vertexCount++;
}
Finally, once all vertices are pushed to the buffer, the 'end' procedure will unmap the buffer to enable the actual rendering of the vertices, bind the VAO, use the shader program, render the provided vertices as triangles, unbind the VAO and reset the vertex count:
void Renderer::end() {
glUnmapBuffer(GL_ARRAY_BUFFER);
glBindBuffer(GL_ARRAY_BUFFER, 0);
glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
glBindVertexArray(_vao);
glUseProgram(_shaderProgram);
glDrawArrays(GL_TRIANGLES, 0, _vertexCount);
glBindVertexArray(0);
_vertexCount = 0;
}
In the main loop I'm beginning the rendering, submitting three vertices to render a simple triangle and ending the rendering process. This is the most important part of that file:
Renderer renderer("../sdr/basicVertex.glsl", "../sdr/basicFragment.glsl");
Renderer::VertexData one;
one.vertex = glm::vec3(-1.0f, 1.0f, 0.0f);
Renderer::VertexData two;
two.vertex = glm::vec3( 1.0f, 1.0f, 0.0f);
Renderer::VertexData three;
three.vertex = glm::vec3( 0.0f,-1.0f, 0.0f);
...
while (running) {
...
renderer.begin();
renderer.submit(&one);
renderer.submit(&two);
renderer.submit(&three);
renderer.end();
SDL_GL_SwapWindow(mainWindow);
}
This may not be the most efficient way of doing this and I'm open for criticism, but my biggest problem is that nothing appears at all. The problem has to lie within those code snippets, but I can't find it - I'm a newbie when it comes to OpenGL, so help is greatly appreciated. If full source code is required, I'll post it using pastebin, but I'm about 99% sure that I did something wrong in those code snippets.
Thank you very much!
You have the vertex attribute disabled when you make the draw call. This part of the setup code looks fine:
glBindVertexArray(_vao);
glBindBuffer(GL_ARRAY_BUFFER, _vbo);
glEnableVertexAttribArray(0);
glBufferData(GL_ARRAY_BUFFER, RENDERER_MAX_VERTICES * sizeof(VertexData), NULL, GL_DYNAMIC_DRAW);
glVertexAttribPointer(0, 3, GL_FLOAT, GL_FALSE, 0, (const GLvoid*) 0);
At this point, the attribute is set up and enabled. But this is followed by:
glDisableVertexAttribArray(0);
Now the attribute is disabled, and there's nothing else in the posted code that enables it again. So when you make the draw call, you don't have a vertex attribute that is actually enabled.
You can simply remove the glDisableVertexAttribArray() call to fix this.
Another problem in your code is the submit() method:
void Renderer::submit(VertexData* data) {
_buffer = data;
_buffer++;
_vertexCount++;
}
Both _buffer and data are pointers to a VertexData structure. So the assignment:
_buffer = data;
is a pointer assignment. Instead of copying the data into the buffer, it modifies the buffer pointer. This should be:
*_buffer = *data;
This will copy the vertex data into the buffer, and leave the buffer pointer unchanged until you explicitly increment it in the next statement.
I've just read through a tutorial about Vertex Array Objects and Vertex Buffer Objects, and I can't work out from the following code how OpenGL knows the first VBO (vertexBufferObjID[0]) represents vertex coordinates, and the second VBO (vertexBufferObjID[1]) represents colour data?
glGenBuffers(2, vertexBufferObjID);
// VBO for vertex data
glBindBuffer(GL_ARRAY_BUFFER, vertexBufferObjID[0]);
glBufferData(GL_ARRAY_BUFFER, 9*sizeof(GLfloat), vertices, GL_STATIC_DRAW);
glVertexAttribPointer((GLuint)0, 3, GL_FLOAT, GL_FALSE, 0, 0);
glEnableVertexAttribArray(0);
// VBO for colour data
glBindBuffer(GL_ARRAY_BUFFER, vertexBufferObjID[1]);
glBufferData(GL_ARRAY_BUFFER, 9*sizeof(GLfloat), colours, GL_STATIC_DRAW);
glVertexAttribPointer((GLuint)1, 3, GL_FLOAT, GL_FALSE, 0, 0);
glEnableVertexAttribArray(1);
Edit: Thanks to Peter's answer, I found the following two lines of code which hook up each VBO with the shaders (indices 0 & 1 correlate to the VBO index):
glBindAttribLocation(programId, 0, "in_Position");
glBindAttribLocation(programId, 1, "in_Color");
It doesn't, you have to tell it which is which in the shader.
layout(location = 0) in vec3 position;
layout(location = 1) in vec3 color;
void main()
{
/* ... */
}
glVertexAttribPointer is only meant to be used with shaders. Therefore you, as the shader writer, always know what each attribute index is supposed to do, as it maps to a certain variable in your vertex shader. You control the index to variable map with commands glBindAttribLocation or glGetAttribLocation, or from special keywords inside GLSL.
If you're just using the fixed function pipeline (default shader), then you don't want to use glVertexAttribPointer. Instead for the fixed function pipe the equivalent commands are glVertexPointer and glColorPointer, etc. Note that these are deprecated commands.
Also note that for fixed function glEnableVertexAttribArray is to be replaced with glEnableClientState.
I am just starting to learn OpenGL today from this tutorial: http://openglbook.com/the-book/
I got to chapter 2, where I draw a triangle, and I understand everything except VAOs (is this acronym OK?). The tutorial has this code:
glGenVertexArrays(1, &VaoId);
glBindVertexArray(VaoId);
While I understand that the code is necessary, I have no clue what it does. Although I never use VaoId past this point (except to destroy it), the code does not function without it. I am assuming this is because it is required to be bound, but I don't know why. Does this exact code just need to be part of every OpenGL program? The tutorial explains VAOs as:
A Vertex Array Object (or VAO) is an object that describes how the vertex attributes are stored in a Vertex Buffer Object (or VBO). This means that the VAO is not the actual object storing the vertex data, but the descriptor of the vertex data. Vertex attributes can be described by the glVertexAttribPointer function and its two sister functions glVertexAttribIPointer and glVertexAttribLPointer, the first of which we’ll explore below.
I don't understand how the VAO describes the vertex attributes. I have not described them in any way. Does it get the information from the glVertexAttribPointer? I guess this must be it. Is the VAO simply a destination for the information from glVertexAttribPointer?
On a side note, is the tutorial I am following acceptable? Is there anything I should watch out for or a better tutorial to follow?
"Vertex Array Object" is brought to you by the OpenGL ARB Subcommittee for Silly Names.
Think of it as a geometry object. (As an old time SGI Performer programmer, I call them geosets.) The instance variables/members of the object are your vertex pointer, normal pointer, color pointer, attrib N pointer, ...
When a VAO is first bound, you assign these members by calling
glEnableClientState(GL_VERTEX_ARRAY); glVertexPointer...;
glEnableClientState(GL_NORMAL_ARRAY); glNormalPointer...;
and so on. Which attributes are enabled and the pointers you supply are stored in the VAO.
After that when you bind the VAO again, all the those attributes and pointers also become current. So one glBindVertexArray call is equivalent to all the code previously needed to set up all the attributes. It's handy for passing geometry around between functions or methods without having to create your own structs or objects.
(One time setup, multiple use is the easiest way to use VAOs, but you can also change attributes just by binding it and doing more enable/pointer calls. VAOs are not constants.)
More info in response to Patrick's questions:
The default for a newly created VAO is that it's empty (AFAIK). No geometry at all, not even vertexes, so if you try to draw it, you'll get an OpenGL error. This is reasonably sane, as in "initialize everything to False/NULL/zero".
You only need to glEnableClientState when you set things up. The VAO remembers the enable/disable state for each pointer.
Yes the VAO will store glEnableVertexAttribArray and glVertexAttrib. The old vertex, normal, color, ... arrays are the same as attribute arrays, vertex == #0 and so on.
I always think about VAO as an array of data buffers used by OpenGL. Using modern OpenGL you will create a VAO and Vertex Buffer Objects.
//vaoB is a buffer
glGenVertexArrays(1, vaoB); //creates one VAO
glBindVertexArray(vao.get(0));
glGenBuffers(vbo.length, vbo, 0); //vbo is a buffer
glBindVertexArray(vao.get(1));
glGenBuffers(vbo1.length, vbo1, 0); //vbo1 is a buffer
glBindVertexArray(vao.get(2));
glGenBuffers(vbo2.length, vbo2, 0); //vbo2 is a buffer
The next step is to bind data to a buffer:
glBindBuffer(GL_ARRAY_BUFFER, vbo[0]);
glBufferData(GL_ARRAY_BUFFER,vertBuf.limit()*4, vertBuf, GL_STATIC_DRAW); //vertf buf is a floatbuffer of vertices
At this point OpenGL Sees:
Now we can use glVertexAttribPointer to tell OpenGL what the data in the buffer represents:
glBindBuffer(GL_ARRAY_BUFFER, 0); //bind VBO at 0
glVertexAttribPointer(0, 3, GL_FLOAT, false, 0, 0); //each vertex has 3 components of size GL_FLOAT with 0 stride (space) between them and the first component starts at 0 (start of data)
OpenGL now has the data in the buffer and knows how the data is organized into vertices. The same process can be applied to texture coordinates etc but for texture coordinates there would be two values.
glBindBuffer(GL_ARRAY_BUFFER, vbo[1]);
glBufferData(GL_ARRAY_BUFFER,coordBuf.limit()*4, coordBuf, GL_STATIC_DRAW);
glVertexAttribPointer(0, 2, GL_FLOAT, false, 0, 0);
Next you can bind texture and draw arrays, you will want to create a Vert and Frag shader, compile and attach it to a program (not included here).
glActiveTexture(textureID); //bind our texture
glBindTexture(GL_TEXTURE_2D, textureID);
glDrawArrays(GL_TRIANGLES,0,6); //in this case 6 indices are used for two triangles forming a square
Vertex Array Objects are like macros in word processing programs and the like. A good description is found here.
Macros just remember the actions you did, such as activate this attribute, bind that buffer, etc. When you call glBindVertexArray( yourVAOId ), it simply replays those attribute pointer bindings and buffer bindings.
So your next call to draw uses whatever was bound by the VAO.
VAO's don't store vertex data. No. The vertex data is stored in a vertex buffer or in an array of client memory.
VAO is an object that represents the vertex fetch stage of the OpenGL pipeline and is used to supply input to the vertex shader.
You can create vertex array object like this
GLuint vao;
glCreateVertexArrays(1, &vao);
glBindVertexArray(vao);
First let' do a simple example. Consider such an input parameter in a shader code
layout (location = 0) in vec4 offset; // input vertex attribute
To fill in this attribute we can use
glVertexAttrib4fv(0, attrib); // updates the value of input attribute 0
Although the vertex array object stores these static attribute values for
you, it can do a lot more.
After creating vertex array object we can start filling in its state. We will ask OpenGL to fill it automatically using the data stored in a buffer object that we supply. Each vertex attribute gets to fetch data from a buffer bound to one of several vertex buffer bindings. For this end we use glVertexArrayAttribBinding(GLuint vao, GLuint attribindex, GLuint bindingindex). Also we use the glVertexArrayVertexBuffer() function to bind a buffer to one of the vertex buffer bindings. We use the glVertexArrayAttribFormat() function to describe the layout and format of the data, and finally we enable automatic filling of the attribute by calling glEnableVertexAttribArray().
When a vertex attribute is enabled, OpenGL will feed data to the vertex shader based on the format and location information you’ve provided with
glVertexArrayVertexBuffer() and glVertexArrayAttribFormat(). When
the attribute is disabled, the vertex shader will be provided with the static information you provide with a call to glVertexAttrib*().
// First, bind a vertex buffer to the VAO
glVertexArrayVertexBuffer(vao, 0, buffer, 0, sizeof(vmath::vec4));
// Now, describe the data to OpenGL, tell it where it is, and turn on automatic
// vertex fetching for the specified attribute
glVertexArrayAttribFormat(vao, 0, 4, GL_FLOAT, GL_FALSE, 0);
glEnableVertexArrayAttrib(vao, 0);
And code in a shader
layout (location = 0) in vec4 position;
After all you need to call to glDeleteVertexArrays(1, &vao).
You can read OpenGL SuperBible to understand it better.
I was trying to understand this as well and now that I think I do, it would be prudent to post a code example aimed at
people less familiar with OpenGL architecture, as I found the previous examples not very illuminating and most tutorials
just tell you to copy paste the code without explaining it.
(This is in C++ but the code can be easily translated to C)
In this example, we'll be rendering a rectangle, which has 4 vertices. Each vertex has a position (vec3, xyz), texture coordinate (vec2, uv) and color attribute (vec4, rgba).
I think it's cleanest to separate each attribute into their own array:
float positions[] = {
+0.5, +0.5, 0,
+0.5, -0.5, 0,
-0.5, -0.5, 0,
-0.5, +0.5, 0
};
float colors[] = {
1, 1, 1, 1,
1, 1, 1, 1,
1, 1, 1, 1,
1, 1, 1, 1
};
float tex_coords[] = {
0, 0,
0, 1,
1, 1,
1, 0
};
Our vertex array object will describe the four vertices with these properties.
First, we need to create the vertex array:
GLuint vertex_array;
glGenVertexArrays(1, &vertex_array);
Each vertex array has a number of buffers, these can be thought of as properties of the array. Each vertex array has an
arbitrary number of "slots" for the buffers. Along with which buffer is in which slot, it saves the CPU-side pointer to
the data for the buffer, and the CPU-side datas format. We need to make OpenGL aware of both which slot to use, where the
data is, and how it is formatted.
The buffers slots are indexed, so the first buffer is index 0, the second is 1, etc.
These locations correspond to the layout defined in the vertex shader:
// vertex shader
std::string _noop_vertex_shader_source = R"(
#version 420
layout (location = 0) in vec3 _position_3d; // slot 0: xyz
layout (location = 1) in vec4 _color_rgba; // slot 1: rgba
layout (location = 2) in vec2 _tex_coord; // slot 2: uv
out vec2 _vertex_tex_coord;
out vec4 _vertex_color_rgba;
void main()
{
gl_Position = vec4(_position_3d.xy, 1, 1); // forward position to fragment shader
_vertex_color_rgba = _color_rgba; // forward color to fragment shader
_vertex_tex_coord = _tex_coord; // forward tex coord to fragment shader
}
)";
We see that the position property is at location 0, the color property at 1 and the tex coords at 2. We'll store these
for clarity:
// property locations from our shader
const auto vertex_pos_location = 0;
const auto vertex_color_location = 1;
const auto vertex_tex_coord_location = 2;
We now need to tell OpenGL the information about each buffer outlined above:
// bind the array, this makes OpenGL aware that we are modifying it with future calls
glBindVertexArray(vertex_array);
// create the position buffer
glGenBuffers(1, &position_buffer);
// bind the buffer so opengl knows we are currently operating on it
glBindBuffer(GL_ARRAY_BUFFER, position_buffer);
// tell opengl where the data pointer is
glBufferData(GL_ARRAY_BUFFER, sizeof(positions), positions, GL_STATIC_DRAW);
// tell opengl how the data is formatted
glVertexAttribPointer(vertex_pos_location, 3, GL_FLOAT, GL_FALSE, 0, (void*) 0);
// tell opengl that this slot should be used
glEnableVertexAttribArray(vertex_pos_location);
Here, we generate a buffer that will hold our position data. For glVertexAttribPointer, we choose the
correct location, 3 elements (as the positions are xyz coordinates), and no offset or stride.
Because we have a separate array for all our properties, we can leave both as 0.
Similar to the position, we generate and fill the buffers for the color and tex coord property:
// color
glGenBuffers(1, &color_buffer); // generate
glBindBuffer(GL_ARRAY_BUFFER, color_buffer); // bind
glBufferData(GL_ARRAY_BUFFER, sizeof(colors), colors, GL_STATIC_DRAW); // set pointer
glVertexAttribPointer(vertex_color_location, 4, GL_FLOAT, GL_FALSE, 0, (void*) 0); // set data format
glEnableVertexAttribArray(vertex_color_location); // enable slot
// tex coords
glGenBuffers(1, &tex_coord_buffer);
glBindBuffer(GL_ARRAY_BUFFER, tex_coord_buffer);
glBufferData(GL_ARRAY_BUFFER, sizeof(tex_coords), tex_coords, GL_STATIC_DRAW);
glVertexAttribPointer(vertex_tex_coord_location, 2, GL_FLOAT, GL_FALSE, 0, (void*) 0);
glEnableVertexAttribArray(vertex_tex_coord_location);
Where we chose 4 elements for the colors because they are in RGBA format and 2 for the tex coords for obvious reasons.
The last thing we need to render a vertex array is an element buffer. These can be thought of as a list of
indices that define which order the vertices will be rendered in. For us, we want to render the
rectangle as two tris in a triangle fan, so we choose the following element buffer:
// vertex order
static uint32_t indices[] = {
0, 1, 2, 1, 2, 3
};
glGenBuffers(1, &element_buffer); // generate
glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, element_buffer); // bind
glBufferData(GL_ELEMENT_ARRAY_BUFFER, sizeof(indices), indices, GL_STATIC_DRAW) // set pointer
We do not need to enable the element buffers slot, it is separate from the vertex array. We don't have to specify the format of the elements buffer here, that will be done during glDrawElements in the render step.
So why all this? All these functions tell OpenGL where to look for the data for the vertices. Specifying the pointers to
the correct buffer data and their layout, if we now bind the vertex array during a render step:
glUseProgram(shader.get_program_id()); // shader program with our vertex shader
glBindVertexArray(vertex_array);
glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, element_buffer);
glDrawElements(GL_TRIANGLES, 6, GL_UNSIGNED_INT, 0);
Where 6 is the number of elements in the element buffer.
This is all that's needed to correctly update the in values in the vertex shader. OpenGL will move the data from
our CPU-side positions, colors and tex_coords into the correct locations 0, 1 and 2 of the vertex shader respectively.
We don't need to bind anything else, the vertex array remembers what we gave it and does it for us, which is why it's convenient and should be preferred in modern OpenGL.
In summary:
Each vertex array has n buffers for arbitrary properties and 1 element buffer. For each property / buffer, we need to
a) generate it (glGenBuffers)
b) bind it (glBindBuffer(GL_ARRAY_BUFFER)
c) tell OpenGL where the data is located in RAM (glBufferData)
d) tell OpenGL how the data is formatted (glVertexAttribPointer)
e) tell OpenGL to use that slot (glEnableVertexAttribArray)
for the element buffer, we only need to generate it, bind it to GL_ELEMENT_ARRAY_BUFFER, then tell opengl
where the data is.
Hopefully that helped shed some light on things. I'm almost positive there will be factual errors in this post as
I'm also mostly new to OpenGL but this was the way I conceptualized it to get my code working.