My understanding is that you have to explicitly specify the alignment of an array, if you want it aligned.
However, the float arrays I declare always seem to be aligned to 16 byte.
float *ptr1 = new float[1];
cout<<"ptr1: "<<ptr1<<endl;
float *ptr2 = new float[3];
cout<<"ptr2: "<<ptr2<<endl;
float arr1[7];
cout<<"arr1: "<<arr1<<endl;
float arr2[9] __attribute__((aligned(2)));
cout<<"arr2: "<<arr2<<endl;
Here is the output
ptr1: 0x13dc010
ptr2: 0x13dc030
arr1: 0x7fff874885c0
arr2: 0x7fff87488590
Is there a reason for this? I am using gcc 4.6.3
However if it's a pointer to a float location or statically allocated, I don't see it
static float arr3[9] __attribute__((aligned(2)));
cout<<"arr3: "<<arr3<<endl;
float *x;
cout<<"x: "<<x<<endl;
Output:
arr3: 0x4030b2
x: 0x7fff8c7dd9e8
This code was run on x64.
Alignment requirements are determined by each compiler, influenced by hardware requirements and any relevant ABI.
The C and C++ languages discuss alignment for types, but they don't impose any specific requirements (except that, for example, a structure's alignment is at least the alignment of any of its members). A valid implementation could permit all data types to be byte aligned, or it could require each scalar type to be aligned to its own size (the latter is more common). Intermediate alignments are possible, such as aligning 8-byte types on 4-byte boundaries.
On the x86 in particular, aligning scalars to their size makes for more efficient access, but misaligned accesses still work correctly, though a little more slowly.
The required alignment for an array of float is the same as the required alignment for a single float object. If float is 4 bytes, then that alignment can be no greater than 4 bytes, since arrays do not have gaps between their elements.
A particular compiler might choose to impose stricter alignment on array objects, as you've (probably) seen, if it makes access to those objects a little more efficient.
And if the new operator is implemented by calling malloc, then all new-allocated objects will have an alignment strict enough for any type.
If float arrays are always aligned to 16-byte boundaries, it's because your compiler chooses to do allocate them that way, not because it's required by the language. On the other hand, if you use aliasing to force a float array to a 4-byte alignment (assuming sizeof (float) == 4), then accesses to that array and to its elements should still work correctly.
Incidentally, when I run your code (after wrapping it in a main program) on my x86_64 system, I get results similar to yours. When I run it on an x86 system, I get:
ptr1: 0x9e34008
ptr2: 0x9e34018
arr1: 0xbfefa160
arr2: 0xbfefa17c
I'm using gcc under Linux on both systems.
So the straightforward answer to your question is no, float arrays are not always aligned to 16-byte boundaries.
But in most cases there's no particular reason for you to care. Unless you play aliasing tricks (treating an object of some declared type as if it were of another type), the compiler will always give each object at least the alignment it needs for correct access.
I'm not sure I fully understand the question, but if you want a larger size I suggest using the type "double" instead of "float". "Float" generally has a size limit of 4 bytes (about 7 digits) whereas "double" usually has a size limit of 8 bytes (about 15 digits).
EDIT: Sorry, I misunderstood the question
That depend on most strict fundamental type alignment requirement of the platform like long double, which is 16 byte alignment require for my Debian 64 system.
The stack frame alignment maybe impact by this too.
Related
According to this answer:
The minimal alignment is (on a given platform) the one which won't give crashes.
With GCC 8, there are two functions to get the minimal and the preferred alignment:
the standard alignof operator that gives the minimum alignment
the GNU __alignof__ function that gives the preferred alignment
For a double, the minimum alignment is 4 bytes and the preferred alignment is 8 bytes on i386 architectures. Therefore, if I correctly understood the answer I quoted above, an application that store a double at an address that is not a multiple of 4, the program should crashes.
Let's look at the following code:
#include <iostream>
void f(void* ptr) {
double* ptr_double = (double*) ptr;
ptr_double[0] = 3.5;
std::cout << ptr_double[0] << std::endl;
std::cout << &ptr_double[0] << std::endl;
}
int main()
{
alignas(__alignof__(double)) char arr[9];
f(arr+1);
return 0;
}
However, if I compile it with -m32 option, it runs well and I get the following results:
3.5
0xffe41571
We can see my double is misaligned but the program runs without any problem.
The very next sentence of the quote above is:
On x86-64 it is one byte.
In some ways, it seems to be true because my code works. But, in this case, why alignof returns 4?
Where is the problem, here? Is the given definition of the minimum alignment is wrong? Or is there something I don't get?
The minimal alignment is (on a given platform) the one which won't give crashes.
Therefore, if I correctly understood the answer I quoted above, an application that store a double at an address that is not a multiple of 4, the program should crashes.
You are denying the antecedent.
Just because conforming to alignment doesn't give crashes, does not mean that misalignment will give crashes.
This is what the C++ standard says:
[expr.alignof] An alignof expression yields the alignment requirement of its operand type.
[basic.align] Object types have alignment requirements ([basic.fundamental], [basic.compound]) which place restrictions on the addresses at which an object of that type may be allocated.
An alignment is an implementation-defined integer value representing the number of bytes between successive addresses at which a given object can be allocated.
An object type imposes an alignment requirement on every object of that type; stricter alignment can be requested using the alignment specifier.
As far as the C++ language is concerned, there are no misaligned objects, so it doesn't specify anything about their behaviour. What you're doing is accessing a non-existing object, and the behaviour of the program is undefined.
Some CPU architectures, and in particular the one that you're using1, do not crash when using misaligned memory addresses. Such operations are simply more or less slower.
But, in this case, why alignof returns 4?
Because the language implementation chose so. Presumably because it is faster than using 1 or 2, but not faster than using 8.
1 This is what the programmers reference manual of 80386 says:
Note that words need not be aligned at even-numbered addresses and doublewords need not be aligned at addresses evenly divisible by four. This allows maximum flexibility in data structures (e.g., records containing mixed byte, word, and doubleword items) and efficiency in memory utilization. When used in a configuration with a 32-bit bus, actual transfers of data between processor and memory take place in units of doublewords beginning at addresses evenly divisible by four; however, the processor converts requests for misaligned words or doublewords into the appropriate sequences of requests acceptable to the memory interface. Such misaligned data transfers reduce performance by requiring extra memory cycles. For maximum performance, data structures (including stacks) should be designed in such a way that, whenever possible, word operands are aligned at even addresses and doubleword operands are aligned at addresses evenly divisible by four. Due to instruction prefetching and queuing within the CPU, there is no requirement for instructions to be aligned on word or doubleword boundaries. (However, a slight increase in speed results if the target addresses of control transfers are evenly divisible by four.)
However, the successor architectures of i386 have introduced vector extensions which do require alignment.
In conclusion: GCC documentation has different definition for what "minimum alignment" means than Starynkevitch has.
[Not a duplicate of Structure padding and packing. That question is about how and when padding occurs. This one is about how to deal with it.]
I have just realized how much memory is wasted as a result of alignment in C++. Consider the following simple example:
struct X
{
int a;
double b;
int c;
};
int main()
{
cout << "sizeof(int) = " << sizeof(int) << '\n';
cout << "sizeof(double) = " << sizeof(double) << '\n';
cout << "2 * sizeof(int) + sizeof(double) = " << 2 * sizeof(int) + sizeof(double) << '\n';
cout << "but sizeof(X) = " << sizeof(X) << '\n';
}
When using g++ the program gives the following output:
sizeof(int) = 4
sizeof(double) = 8
2 * sizeof(int) + sizeof(double) = 16
but sizeof(X) = 24
That's 50% memory overhead! In a 3-gigabyte array of 134'217'728 Xs 1 gigabyte would be pure padding.
Fortunately, the solution to the problem is very simple - we simply have to swap double b and int c around:
struct X
{
int a;
int c;
double b;
};
Now the result is much more satisfying:
sizeof(int) = 4
sizeof(double) = 8
2 * sizeof(int) + sizeof(double) = 16
but sizeof(X) = 16
There is however a problem: this isn't cross-compatible. Yes, under g++ an int is 4 bytes and a double is 8 bytes, but that's not necessarily always true (their alignment doesn't have to be the same either), so under a different environment this "fix" could not only be useless, but it could also potentially make things worse by increasing the amount of padding needed.
Is there a reliable cross-platform way to solve this problem (minimize the amount of needed padding without suffering from decreased performance caused by misalignment)? Why doesn't the compiler perform such optimizations (swap struct/class members around to decrease padding)?
Clarification
Due to misunderstanding and confusion, I'd like to emphasize that I don't want to "pack" my struct. That is, I don't want its members to be unaligned and thus slower to access. Instead, I still want all members to be self-aligned, but in a way that uses the least memory on padding. This could be solved by using, for example, manual rearrangement as described here and in The Lost Art of Packing by Eric Raymond. I am looking for an automated and as much cross-platform as possible way to do this, similar to what is described in proposal P1112 for the upcoming C++20 standard.
(Don't apply these rules without thinking. See ESR's point about cache locality for members you use together. And in multi-threaded programs, beware false sharing of members written by different threads. Generally you don't want per-thread data in a single struct at all for this reason, unless you're doing it to control the separation with a large alignas(128). This applies to atomic and non-atomic vars; what matters is threads writing to cache lines regardless of how they do it.)
Rule of thumb: largest to smallest alignof(). There's nothing you can do that's perfect everywhere, but by far the most common case these days is a sane "normal" C++ implementation for a normal 32 or 64-bit CPU. All primitive types have power-of-2 sizes.
Most types have alignof(T) = sizeof(T), or alignof(T) capped at the register width of the implementation. So larger types are usually more-aligned than smaller types.
Struct-packing rules in most ABIs give struct members their absolute alignof(T) alignment relative to the start of the struct, and the struct itself inherits the largest alignof() of any of its members.
Put always-64-bit members first (like double, long long, and int64_t). ISO C++ of course doesn't fix these types at 64 bits / 8 bytes, but in practice on all CPUs you care about they are. People porting your code to exotic CPUs can tweak struct layouts to optimize if necessary.
then pointers and pointer-width integers: size_t, intptr_t, and ptrdiff_t (which may be 32 or 64-bit). These are all the same width on normal modern C++ implementations for CPUs with a flat memory model.
Consider putting linked-list and tree left/right pointers first if you care about x86 and Intel CPUs. Pointer-chasing through nodes in a tree or linked list has penalties when the struct start address is in a different 4k page than the member you're accessing. Putting them first guarantees that can't be the case.
then long (which is sometimes 32-bit even when pointers are 64-bit, in LLP64 ABIs like Windows x64). But it's guaranteed at least as wide as int.
then 32-bit int32_t, int, float, enum. (Optionally separate int32_t and float ahead of int if you care about possible 8 / 16-bit systems that still pad those types to 32-bit, or do better with them naturally aligned. Most such systems don't have wider loads (FPU or SIMD) so wider types have to be handled as multiple separate chunks all the time anyway).
ISO C++ allows int to be as narrow as 16 bits, or arbitrarily wide, but in practice it's a 32-bit type even on 64-bit CPUs. ABI designers found that programs designed to work with 32-bit int just waste memory (and cache footprint) if int was wider. Don't make assumptions that would cause correctness problems, but for "portable performance" you just have to be right in the normal case.
People tuning your code for exotic platforms can tweak if necessary. If a certain struct layout is perf-critical, perhaps comment on your assumptions and reasoning in the header.
then short / int16_t
then char / int8_t / bool
(for multiple bool flags, especially if read-mostly or if they're all modified together, consider packing them with 1-bit bitfields.)
(For unsigned integer types, find the corresponding signed type in my list.)
A multiple-of-8 byte array of narrower types can go earlier if you want it to. But if you don't know the exact sizes of types, you can't guarantee that int i + char buf[4] will fill an 8-byte aligned slot between two doubles. But it's not a bad assumption, so I'd do it anyway if there was some reason (like spatial locality of members accessed together) for putting them together instead of at the end.
Exotic types: x86-64 System V has alignof(long double) = 16, but i386 System V has only alignof(long double) = 4, sizeof(long double) = 12. It's the x87 80-bit type, which is actually 10 bytes but padded to 12 or 16 so it's a multiple of its alignof, making arrays possible without violating the alignment guarantee.
And in general it gets trickier when your struct members themselves are aggregates (struct or union) with a sizeof(x) != alignof(x).
Another twist is that in some ABIs (e.g. 32-bit Windows if I recall correctly) struct members are aligned to their size (up to 8 bytes) relative to the start of the struct, even though alignof(T) is still only 4 for double and int64_t.
This is to optimize for the common case of separate allocation of 8-byte aligned memory for a single struct, without giving an alignment guarantee. i386 System V also has the same alignof(T) = 4 for most primitive types (but malloc still gives you 8-byte aligned memory because alignof(maxalign_t) = 8). But anyway, i386 System V doesn't have that struct-packing rule, so (if you don't arrange your struct from largest to smallest) you can end up with 8-byte members under-aligned relative to the start of the struct.
Most CPUs have addressing modes that, given a pointer in a register, allow access to any byte offset. The max offset is usually very large, but on x86 it saves code size if the byte offset fits in a signed byte ([-128 .. +127]). So if you have a large array of any kind, prefer putting it later in the struct after the frequently used members. Even if this costs a bit of padding.
Your compiler will pretty much always make code that has the struct address in a register, not some address in the middle of the struct to take advantage of short negative displacements.
Eric S. Raymond wrote an article The Lost Art of Structure Packing. Specifically the section on Structure reordering is basically an answer to this question.
He also makes another important point:
9. Readability and cache locality
While reordering by size is the simplest way to eliminate slop, it’s not necessarily the right thing. There are two more issues: readability and cache locality.
In a large struct that can easily be split across a cache-line boundary, it makes sense to put 2 things nearby if they're always used together. Or even contiguous to allow load/store coalescing, e.g. copying 8 or 16 bytes with one (unaliged) integer or SIMD load/store instead of separately loading smaller members.
Cache lines are typically 32 or 64 bytes on modern CPUs. (On modern x86, always 64 bytes. And Sandybridge-family has an adjacent-line spatial prefetcher in L2 cache that tries to complete 128-byte pairs of lines, separate from the main L2 streamer HW prefetch pattern detector and L1d prefetching).
Fun fact: Rust allows the compiler to reorder structs for better packing, or other reasons. IDK if any compilers actually do that, though. Probably only possible with link-time whole-program optimization if you want the choice to be based on how the struct is actually used. Otherwise separately-compiled parts of the program couldn't agree on a layout.
(#alexis posted a link-only answer linking to ESR's article, so thanks for that starting point.)
gcc has the -Wpadded warning that warns when padding is added to a structure:
https://godbolt.org/z/iwO5Q3:
<source>:4:12: warning: padding struct to align 'X::b' [-Wpadded]
4 | double b;
| ^
<source>:1:8: warning: padding struct size to alignment boundary [-Wpadded]
1 | struct X
| ^
And you can manually rearrange members so that there is less / no padding. But this is not a cross platform solution, as different types can have different sizes / alignments on different system (Most notably pointers being 4 or 8 bytes on different architectures). The general rule of thumb is go from largest to smallest alignment when declaring members, and if you're still worried, compile your code with -Wpadded once (But I wouldn't keep it on generally, because padding is necessary sometimes).
As for the reason why the compiler can't do it automatically is because of the standard ([class.mem]/19). It guarantees that, because this is a simple struct with only public members, &x.a < &x.c (for some X x;), so they can't be rearranged.
There really isn't a portable solution in the generic case. Baring minimal requirements the standard imposes, types can be any size the implementation wants to make them.
To go along with that, the compiler is not allowed to reorder class member to make it more efficient. The standard mandates that the objects must be laid out in their declared order (by access modifier), so that's out as well.
You can use fixed width types like
struct foo
{
int64_t a;
int16_t b;
int8_t c;
int8_t d;
};
and this will be the same on all platforms, provided they supply those types, but it only works with integer types. There are no fixed-width floating point types and many standard objects/containers can be different sizes on different platforms.
Mate, in case you have 3GB of data, you probably should approach an issue by other way then swapping data members.
Instead of using 'array of struct', 'struct of arrays' could be used.
So say
struct X
{
int a;
double b;
int c;
};
constexpr size_t ArraySize = 1'000'000;
X my_data[ArraySize];
is going to became
constexpr size_t ArraySize = 1'000'000;
struct X
{
int a[ArraySize];
double b[ArraySize];
int c[ArraySize];
};
X my_data;
Each element is still easily accessible mydata.a[i] = 5; mydata.b[i] = 1.5f;....
There is no paddings (except a few bytes between arrays). Memory layout is cache friendly. Prefetcher handles reading sequential memory blocks from a few separate memory regions.
That's not as unorthodox as it might looks at first glance. That approach is widely used for SIMD and GPU programming.
Array of Structures (AoS), Structure of Arrays
This is a textbook memory-vs-speed problem. The padding is to trade memory for speed. You can't say:
I don't want to "pack" my struct.
because pragma pack is the tool invented exactly to make this trade the other way: speed for memory.
Is there a reliable cross-platform way
No, there can't be any. Alignment is strictly platform-dependent issue. Sizeof different types is a platform-dependent issue. Avoiding padding by reorganizing is platform-dependent squared.
Speed, memory, and cross-platform - you can have only two.
Why doesn't the compiler perform such optimizations (swap struct/class members around to decrease padding)?
Because the C++ specifications specifically guarantee that the compiler won't mess up your meticulously organized structs. Imagine you have four floats in a row. Sometimes you use them by name, and sometimes you pass them to a method that takes a float[3] parameter.
You're proposing that compiler should shuffle them around, potentially breaking all the code since the 1970s. And for what reason? Can you guarantee that every programmer ever will actually want to save your 8 bytes per struct? I'm, for one, sure that if I have 3 GB array, I'm having bigger problems than a GB more or less.
Although the Standard grants implementations broad discretion to insert arbitrary amounts of space between structure members, that's because the authors didn't want to try to guess all the situations where padding might be useful, and the principle "don't waste space for no reason" was considered self-evident.
In practice, almost every commonplace implementation for commonplace hardware will use primitive objects whose size is a power of two, and whose required alignment is a power of two that is no larger than the size. Further, almost every such implementation will place each member of a struct at the first available multiple of its alignment that completely follows the previous member.
Some pedants will squawk that code which exploits that behavior is "non-portable". To them I would reply
C code can be non-portable. Although it strove to give programmers the opportunity to write truly portable programs, the C89 Committee did not want to force programmers into writing portably, to preclude the use of C as a “high-level assembler”: the ability to write machine specific code is one of the strengths of C.
As a slight extension to that principle, the ability of code which need only run on 90% of machines to exploit features common to that 90% of machines--even though such code wouldn't exactly be "machine-specific"--is one of the strengths of C. The notion that C programmers shouldn't be expected to bend over backward to accommodate limitations of architectures which for decades have only been used in museums should be self-evident, but apparently isn't.
You can use #pragma pack(1), but the very reason of this is that the compiler optimizes. Accessing a variable through the full register is faster than accessing it to the least bit.
Specific packing is only useful for serialization and intercompiler compatibility, etc.
As NathanOliver correctly added, this might even fail on some platforms.
After some readings, I understand that compiler has done the padding for structs or classes such that each member can be accessed on its natural aligned boundary. So under what circumstance is it necessary for coders to make explicit alignment to achieve better performance? My question arises from here:
Intel 64 and IA-32 Architechtures Optimization Reference Manual:
For best performance, align data as follows:
Align 8-bit data at any address.
Align 16-bit data to be contained within an aligned 4-byte word.
Align 32-bit data so that its base address is a multiple of four.
Align 64-bit data so that its base address is a multiple of eight.
Align 80-bit data so that its base address is a multiple of sixteen.
Align 128-bit data so that its base address is a multiple of sixteen.
So suppose I have a struct:
struct A
{
int a;
int b;
int c;
}
// size = 12;
// aligned on boundary of: 4
By creating an array of type A, even if I do nothing, it is properly aligned. Then what's the point to follow the guide and make the alignment stronger?
Is it because of cache line split? Assuming the cache line is 64 bytes. With the 6th access of object in the array, the byte starts from 61 to 72, which slows down the program??
BTW, is there a macro in standard library that tells me the alignment requirement based on the running machine by returning a value of std::size_t?
Let me answer your question directly: No, there is no need to explicitly align data in C++ for performance.
Any decent compiler will properly align the data for underlying system.
The problem would come (variation on above) if you had:
struct
{
int w ;
char x ;
int y ;
char z ;
}
This illustrates the two common structure alignment problems.
(1) It is likely a compiler would insert (2) 3 alignment bytes after both x and z. If there is no padding after x, y is unaligned. If there is no padding after z, w and x will be unaligned in arrays.
The instructions are you are reading in the manual are targeted towards assembly language programmers and compiler writers.
When data is unaligned, on some systems (not Intel) it causes an exception and on others it take multiple processor cycles to fetch and write the data.
The only time I can thing of when you want explicit alignment is when you are directly copying/casting data between your struct to a char* for serialization in some type of binary protocol.
Here unexpected padding may cause problems with a remote user of your protocol.
In pseudocode:
struct Data PACKED
{
char code[3];
int val;
};
Data data = { "AB", 24 };
char buf[20];
memcpy(buf, data, sizeof(data));
send (buf, sizeof(data);
Now if our protocol expects 3 octets of code followed by a 4 octet integer value for val, we will run into problems if we use the above code. Since padding will introduce problems for us. The only way to get this to work is for the struct above to be packed (allignment 1)
There is indeed a facility in the language (it's not a macro, and it's not from the standard library) to tell you the alignment of an object or type. It's alignof (see also: std::alignment_of).
To answer your question: In general you should not be concerned with alignment. The compiler will take care of it for you, and in general/most cases it knows much, much better than you do how to align your data.
The only case where you'd need to fiddle with alignment (see alignas specifier) is when you're writing some code which allows some possibly less aligned data type to be the backing store for some possibly more aligned data type.
Examples of things that do this under the hood are std::experimental::optional and boost::variant. There's also facilities in the standard library explicitly for creating such a backing store, namely std::aligned_storage and std::aligned_union.
By creating an array of type A, even if I do nothing, it is properly aligned. Then what's the point to follow the guide and make the alignment stronger?
The ABI only describes how to use the data elements it defines. The guideline doesn't apply to your struct.
Is it because of cache line split? Assuming the cache line is 64 bytes. With the 6th access of object in the array, the byte starts from 61 to 72, which slows down the program??
The cache question could go either way. If your algorithm randomly accesses the array and touches all of a, b, and c then alignment of the entire structure to a 16-byte boundary would improve performance, because fetching any of a, b, or c from memory would always fetch the other two. However if only linear access is used or random accesses only touch one of the members, 16-byte alignment would waste cache capacity and memory bandwidth, decreasing performance.
Exhaustive analysis isn't really necessary. You can just try and see what alignas does for performance. (Or add a dummy member, pre-C++11.)
BTW, is there a macro in standard library that tells me the alignment requirement based on the running machine by returning a value of std::size_t?
C++11 (and C11) have an alignof operator.
I got a structure like this:
struct bar {
char x;
char *y;
};
I can assume that on a 32 bit system, that padding for char will make it 4 bytes total, and a pointer in 32 bit is 4, so the total size will be 8 right?
I know it's all implementation specific, but I think if it's within 1-4, it should be padded to 4, within 5-8 to 8 and 9-16 within 16, is this right? it seems to work.
Would I be right to say that the struct will be 12 bytes in a x64 arch, because pointers are 8 bytes? Or what do you think it should be?
I can assume that on a 32 bit system,
that padding for char will make it 4
bytes total, and a pointer in 32 bit
is 4, so the total size will be 8
right?
It's not safe to assume that, but that will often be the case, yes. For x86, fields are usually 32-bit aligned. The reason for this is to increase the system's performance at the cost of memory usage (see here).
Would I be right to say that the
struct will be 12 bytes in a x64 arch,
because pointers are 8 bytes? Or what
do you think it should be?
Similarly, for x64, fields are usually 64-bit/8-byte aligned, so sizeof(bar) would be 16.
As Anders points out, however, all this goes flying out the window once you start playing with alignment via /Zp, the pack directive, or whatever else your compiler supports.
Its a compiler switch, you can't assume anything. If you assume you may get into trouble.
For instance in Visual Studio you can decide using pragma pack(1) that you want it directly on the byte boundary.
You can't assume anything in general. Every platform decides its own padding rules.
That said, any architecture that uses "natural" alignment, where operands are padded to their own size (necessary and sufficient to avoid straddling naturally-aligned pages, cachelines, etc), will make bar twice the pointer size.
So, given natural alignment rules and nothing more, 8 bytes on 32-bit, 16 bytes on 64-bit.
$9.2/12-
Nonstatic data members of a
(non-union) class declared without an
intervening access-specifier are
allocated so that later members have
higher addresses within a class
object. The order of allocation of
nonstatic data members separated by an
access-specifier is unspecified
(11.1). Implementation alignment
requirements might cause two adjacent
members not to be allocated
immediately after each other; so might
requirements for space for managing
virtual functions (10.3) and virtual
base classes (10.1).
So, it is highly implementation specific as you already mentioned.
Not quite.
Padding depends on the alignment requirement of the next member. The natural alignment of built-in data types is their size.
There is no padding before char members since their alignment requirement is 1 (assuming char is 1 byte).
For example, if a char (again assume it is one byte) is followed by a short, which, say, is 2 bytes, there may be up to 1 byte of padding because a short must be 2-byte aligned. If a char is followed by double of the size of 8, there may be up to 7 bytes of padding because a double is 8-byte aligned. On the other hand, if a short is followed by a double, the may be up to 6 bytes of padding.
And the size of a structure is a multiple of the alignment of a member with the largest alignment requirement, so there may be tail padding. In the following structure, for instance,
struct baz {
double d;
char c;
};
the member with the largest alignment requirement is d, it's alignment requirement is 8, Which gives sizeof(baz) == 2 * alignof(double). There is 7 bytes of tail padding after member c.
gcc and other modern compilers support __alignof() operator. There is also a portable version in boost.
As others have mentioned, the behaviour can't be relied upon between platforms. However, if you still need to do this, then one thing you can use is BOOST_STATIC_ASSERT() to ensure that if the assumptions are violated then you find out at compile time, eg
#include <boost/static_assert.hpp>
#if ARCH==x86 // or whatever the platform specific #define is
BOOST_STATIC_ASSERT(sizeof(bar)==8);
#elif ARCH==x64
BOOST_STATIC_ASSERT(sizeof(bar)==16);
#else ...
If alignof() is available you could also use that to test your assumption.
This question already has answers here:
Closed 13 years ago.
Possible Duplicate:
Why isn’t sizeof for a struct equal to the sum of sizeof of each member?
Why is the sizeof(); of this structure 16 bytes? I'm compiling in g++.
struct bitmapfileheader {
unsigned short bfType;
unsigned int bfSize;
unsigned short bfReserved1;
unsigned short bfReserved2;
unsigned int bfOffBits;
};
It's because the 4 byte ints are aligned to a 4 byte boundry, so there are 2 bytes of padding after bfType.
Alignment.
Likely on your platform ints have to be 4byte aligned and shorts are 2byte aligned.
+0 -1 : bfType
+2 -3 : <padding>
+4 -7: bfSize
+8 -9: bfReserve1
+10 -11: bfReserve2
+12 -15: bfOffBits
-------------
16 bytes
Alignment is good because unaligned structures require extra work for many architectures.
The individual fields in a structure need to be aligned appropriately. The compiler will pad additional space in the structure in order to satisfy alignment requirements.
If you don't want this, you can use the UNALIGNED macro.
I think your compiler uses 4-byte allignment for the fields.
This issue comes because of a concept known as alignment. In many cases, it is desirable to have a number placed at an address that is a multiple of the size of the number in bytes (up to some maximum, often the pointer size of the platform). A variable so placed is said to be aligned to a n-byte boundary, where n is the number. The exact effects of this depend on the processor. Many processors perform math faster if the data is properly aligned. Some are even incapable of performing operations (sometimes even load operations) on unsuitably-aligned data - in order to work on such data, it has to be loaded into two registers and then a series of bit shifts and masks need to be performed to get a usable value, and then it needs to be put back. Think of it like storing half of the int in each of two buckets and needing to put them together to use it, rather than simply storing the whole int in one bucket.
In your case, the initial bfType likely needs to be aligned to a 2-byte boundary, while bfSize likely needs to be aligned to a 4-byte boundary. The compiler has to accomodate this by aligning the entire struct to 4 bytes, and leaving 2 unused bytes between bfType and bfSize.
When compiling on the same system, however, the padding is probably going to be consistent, possibly depending on compiler options and the specific ABI used (generally, you're safe on the same platform unless you are trying to make things incompatible). You can freely make another struct with the same first 5 members, and they will take up 16 bytes of the other struct, in the exact same positions.
If you really need to avoid this behavior, you will have to check your compiler documentation. Most compilers offer an attribute or keyword to declare a variable as having no alignment, and another one to indicate that a struct should have no padding. But these are rarely necessary in the general course of things.
U can pragma pack the structure to avoid padding
ISO C++03, 9.2[class.mem]/12:
Nonstatic data members of a (non-union) class declared without an intervening access-specifier are allocated so that later members have higher addresses within a class object. The order of allocation of nonstatic data members separated by an access-specifier is unspecified (11.1). Implementation alignment requirements might cause two adjacent members not to be allocated immediately after each other; so might requirements for space for managing virtual functions (10.3) and virtual base classes (10.1).
because of the way memory is allocated, there will be padding after a short
This is due to alignment - the compiler has to do some padding.