I am trying to run a Swift app on my iPhone 4s. It works fine on the simulator, and my friend can successfully run it on his iPhone 4s. I have iOS 8 and the official release of Xcode 6.
I have tried
Restarting Xcode, iPhone, computer
Cleaning & rebuilding
Revoking and creating new certificate/provision profile
Runpath Search Paths is $(inherited) #executable_path/Frameworks
Embedded Content Contains Swift Code is 'Yes'
Code Signing Identity is developer
Below is the error in entirety
dyld: Library not loaded: #rpath/libswiftCore.dylib
Referenced from: /private/var/mobile/Containers/Bundle/Application/LONGSERIALNUMBER/AppName.app/AppName
Reason: no suitable image found. Did find:
/private/var/mobile/Containers/Bundle/Application/LONGSERIALNUMBER/AppName.app/Frameworks/libswiftCore.dylib: mmap() error 1 at
address=0x008A1000, size=0x001A4000 segment=__TEXT in Segment::map() mapping
/private/var/mobile/Containers/Bundle/Application/LONGSERIALNUMBER/APPLICATION_NAME/Frameworks/libswiftCore.dylib
For me none of the previous solutions worked. We discovered that there is an "Always Embed Swift Standard Libraries" flag in the Build Settings that needs to be set to YES. It was NO by default!
Build Settings > Always Embed Swift Standard Libraries
After setting this, clean the project before building again.
For keen readers some explanation
The most important part is:
set the Embedded Content Contains Swift Code (EMBEDDED_CONTENT_CONTAINS_SWIFT) build setting to YES in your app as shown in Figure 2. This build setting, which specifies whether a target's product has embedded content with Swift code, tells Xcode to embed Swift standard libraries in your app when set to YES.
The flag was formerly called Embedded Content Contains Swift Code
Surprisingly enough, all i did was "Clean" my project (shift+cmd+K) and it worked. Did seem to be related to the certificate though.
I started getting this error when I removed:
#executable_path/Frameworks
from Runpath Search Paths in my build settings. Replacing it fixed everything up again (thank goodness for source control!)
I don't know how it got there, but it appears to be needed for a binary to find its embedded Swift runtime.
For the device, you also need to add the dynamic framework to the Embedded binaries section in the General tab of the project.
In Xcode 8 the option for Embedded Content Contains Swift Code option is no longer available.
It has been renamed to "Always Embed Swift Standard Libraries = YES"
Xcode 13 here (13.1 with react-native).
Created a clean react-native project and saw /usr/lib/swift as an entry in Runpath Search Paths.
After adding that, my project finally ran without crashing!
Nothing helped from what was suggested before.
I think it's a bug when certificates are generated directly from Xcode. To resolve (at least in Xcode 6.1 / 6A1052d):
go to the Apple Developer website where certificates are managed: https://developer.apple.com/account/ios/certificate/certificateList.action
select your certificate(s) (which should show "Managed by Xcode" under "Status") and "Revoke" it
follow instructions here to manually generate a new certificate: https://developer.apple.com/library/ios/documentation/IDEs/Conceptual/AppDistributionGuide/MaintainingCertificates/MaintainingCertificates.html#//apple_ref/doc/uid/TP40012582-CH31-SW32
go to Xcode > Preferences > Accounts > [your Apple ID] > double-click your team name > hit refresh button to update certificates and provisioning profiles
I was having this issue with running my Swift tests (but not my app). It turns out that the test needed to have more than #executable_path/Frameworks in it's Runpath Search Paths build setting for the test target. Setting the Runpath Search Paths to the following worked a charm for me:
$(inherited)
#executable_path/Frameworks
#loader_path/Frameworks
OK, sharing here another cause of this error. It took me a few hours to sort this out.
In my case the trust policy of my certificate in Keychain Access was Always Trust, changing it back to defaults solved the problem.
In order to open the certificate settings window double click the certificate in the Keychain Access list of certificates.
This issue occurs again in Xcode 10.2. You must download and install the following package from Apple. It provides Swift 5 Runtime Support for Command Line Tools.
https://support.apple.com/kb/DL1998?locale=en_US
You have to set the Runpath Search Paths to #executable_path/Frameworks as showed in the following screenshot of Build Settings:
If you have any embedded frameworks made in Swift, than you can set to YES the Build Options Embedded Content Contains Swift Code.
I think Apple has already summarized it under Swift app crashes when trying to reference Swift library libswiftCore.dylib
Cited from Technical Q&A QA1886:
Swift app crashes when trying to reference Swift library
libswiftCore.dylib.
Q: What can I do about the libswiftCore.dylib loading error in my
device's console that happens when I try to run my Swift language app?
A: To correct this problem, you will need to sign your app using code
signing certificates with the Subject Organizational Unit (OU) set to
your Team ID. All Enterprise and standard iOS developer certificates
that are created after iOS 8 was released have the new Team ID field
in the proper place to allow Swift language apps to run.
Usually this error appears in the device's console log with a message
similar to one of the following:
[....] [deny-mmap] mapped file has no team identifier and is not a platform binary:
/private/var/mobile/Containers/Bundle/Application/5D8FB2F7-1083-4564-94B2-0CB7DC75C9D1/YourAppNameHere.app/Frameworks/libswiftCore.dylib
Dyld Error Message:
Library not loaded: #rpath/libswiftCore.dylib
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000001, 0x0000000120021088
Triggered by Thread: 0
Referenced from: /private/var/mobile/Containers/Bundle/Application/C3DCD586-2A40-4C7C-AA2B-64EDAE8339E2/TestApp.app/TestApp
Reason: no suitable image found. Did find:
/private/var/mobile/Containers/Bundle/Application/C3DCD586-2A40-4C7C-AA2B-64EDAE8339E2/TestApp.app/Frameworks/libswiftCore.dylib: mmap() error 1 at address=0x1001D8000, size=0x00194000 segment=__TEXT in Segment::map() mapping /private/var/mobile/Containers/Bundle/Application/C3DCD586-2A40-4C7C-AA2B-64EDAE8339E2/TestApp.app/Frameworks/libswiftCore.dylib
Dyld Version: 353.5
The new certificates are needed when building an archive and packaging
your app. Even if you have one of the new certificates, just resigning
an existing swift app archive won’t work. If it was built with a
pre-iOS 8 certificate, you will need to build another archive.
Important: Please use caution if you need to revoke and setup up a new
Enterprise Distribution certificate. If you are an in-house Enterprise
developer you will need to be careful that you do not revoke a
distribution certificate that was used to sign an app any one of your
Enterprise employees is still using as any apps that were signed with
that enterprise distribution certificate will stop working
immediately. The above only applies to Enterprise Distribution
certificates. Development certs are safe to revoke for
enterprise/standard iOS developers.
As the AirSign guys state the problem roots from the missing OU attribute in the subject field of the In-House certificate.
Subject: UID=269J2W3P2L, CN=iPhone Distribution: Company Name, OU=269J2W3P2L, O=Company Name, C=FR
I have an enterprise development certificate, creating a new one solved the issue.
Let's project P is importing custom library L, then you must add L into
P -> Build Phases -> Embed Frameworks -> +. That works for me.
This error message can also be caused when upgrading Xcode (and subsequently to a new version of Swift) and your project uses a framework built/compiled with an older/previous version of Swift.
In this case rebuilding the framework and re-adding it will fix the problem.
The most easy and easy to ignored way : clean and rebuild.
This solved the issue after tried the answers above and did not worked.
I was having the same problem after moving to a new mac, and after hours, trying all the suggested answers in the questions, none of this worked for me.
The solution for me was installing this missing certificate.
http://developer.apple.com/certificationauthority/AppleWWDRCA.cer
Found the answer here.
https://stackoverflow.com/a/14495100/976628
Change Copy Pods Resources for the target from:
"${SRCROOT}/Pods/Target Support Files/Pods-Wishlist/Pods-Wishlist-resources.sh"
to:
"${SRCROOT}/Pods/Target Support Files/Pods-Wishlist/Pods-Wishlist-frameworks.sh"
I solved by deleting the derived data and this time it worked correctly. Tried with Xcode 7.3.1GM
After having tried out everything, I finally found out, that the build seems not always include every detail again and again. Maybe for speeding up the process...
In order to ensure WHOLE packaging before running on a device, make a Clean first: Shift-Cmd-K.
Then build with: Cmd-B.
After that run it on your device.
Easy.
Kind regards to all you nice guys in that place!
In my case, it was just the name of my target :
I renamed it like this : MyApp.something and the same issue appeared.
But I saw in the build Settings window, my product module name has been changed like this MyApp-something.
So, I removed the dot in my target name (MyAppSomething) and the issue was gone.
For me, having tried everything with no success, what worked was to remove #executable_path/Frameworks from the Packaging section (don't know how it came to be in there in the first place)
We had a unity project that creates an xcode project that includes libraries that use swift.
We tried each and every reasonable suggestion on this thread.
Nothing worked. Code runs fine on new devices, and crashes on iOS<=12
It seems that swift is so smart, that even if you set it to "ALWAYS_EMBED_SWIFT_LIBRAIES"="YES" it does not include the swift libraries.
What actually solved the problem for us is to include a dummy swift file in the project.
The file must contain calls to dispatch, foundation libraries.
Apparently this hints mighty-xcode to force include the libraries, but this time for real.
Here is the dummy file we added that made it work:
import Dispatch
import Foundation
class ForceSwiftInclusion {
init() {
// Force dispatch library.
DispatchQueue.main.async {
print("something")
}
// Force foundation library.
let uuid = UUID().uuidString
print("\(uuid)")
}
}
For unity, also add project.AddBuildProperty(target, "SWIFT_VERSION", "Swift 5"); to your post processing for creating the xcode project.
What worked for me in Xcode 11 was going to General -> Frameworks, Libraries, and Embedded Content and changing the "Embed" option for the framework in question to "Embed & Sign"
None of the solutions worked for me. Restarting the phone fixed it. Strange but it worked.
none of these solutions seemed to work but when I changed the permission of the world Wide Developer cert to Use System defaults then it worked. I have included the steps and screenshots in the link below
I would encourage you to log the ticket in apple bug report as mentioned here as Apple really should solve this massive error:
https://stackoverflow.com/a/41401354/559760
I had the same issue for Xcode 13+ when I create a release build. Had to waste my time on troubleshooting this issue. Finally I was able to fix the issue with following step.
I added a new entry for Release in Runpath Search Paths in Build Settings -> Linking.
/usr/lib/swift
After adding that, I could run my app without crashing!
Xcode 7.2, iOS 9.2 on one device, 9.0 on other. Both had the error. No idea what changed that caused it, but the solutions above for the WWDR were correct for me. Install that cert and problem solved.
https://forums.developer.apple.com/message/43547
https://forums.developer.apple.com/message/84846
There are lot's of answers there but might be my answer will help some one.
I am having same issue, My app works fine on Simulator but on Device got crashed as I Lunches app and gives error as above. I have tried all answers and solutions . In My Case , My Project I am having multiple targets .I have created duplicate target B from target A. Target B works fine while target A got crashed. I am using different Image assets for each target. After searching and doing google I have found something which might help to someone.
App stop crashing when I change name of Launch images assets for both apps . e.g Target A Launch Image asset name LaunchImage A . Target B Lunch Image asset name LaunchImage B and assigned properly in General Tab of each target . My Apps works fine.
For me building a MacOS command line Swift app that depended on 3rd party Swift libs (e.g. SQLite) none of the above solutions seemed to work. What did work was directly adding the following path to my Runpath Search Paths in the Build Settings:
/Applications/Xcode.app/Contents//Developer/Toolchains/XcodeDefault.xctoolchain/usr/lib/swift/macosx/
Doing that did give a warning at runtime saying that Xcode had found 2 versions of libswiftCore - which makes sense. Except that not including that line resulted in Xcode not finding any versions of libswiftCore.
Anyway, that'll do for me even if it doesn't seem right - my app is just a utility that I'm not intending to distribute and at least it runs now!
I have multiple version of Xcode installed at the same time. The framework was built with a newer version of Xcode. The app that I tried to compile was with an older version of Xcode. When I cleaned and compiled both the framework and the app with the same version of Xcode then things worked.
I'm attempting to merge some code from a 3rd party. I thought I merged the source file ok as well as the .vcxproj files. To test out, I tried to do a compile of a single source file. It did a compile and failed with a message (don't remember what atm) and I addressed the error and tried to build that source file again. What I got was
1>Error: The operation could not be completed
Yes, not very helpful error message and I'm at a loss. I tried to delete the object files and tried again, I still get the same message. It doesn't seem even building anything. What can I do to get VS2017 to give me more helpful diagnostics? What could be causing this issue?
I got this error when moving a website from .net 2 to .net 4.6.1 which was hosted on local IIS7.5. It also showed as Visual Studio throwing all manner of errors upon loading the solution (pointing me at the not very helpful activity log)
All of my assemblies had been recompiled to .Net 4.6.1 and I'd changed the app pool to run .net 4 and integrated, however, VS seemed to think the web site should be loaded or compiled as plain .Net 4.0. This meant that it couldn't load the .Net 4.6.1 assemblies but didn't register this error just said it couldn't complete the operation.
I amended the web.config to add targetFramework="4.6.1" into the compilation element and it fixed it.
I just had this same error which drove me mad for hours. It turned out to be due to some sort of mix-up in the compilation configurations in the solution file, which made reference to configurations that did not exist (because the solution had been copied from another with more projects in it). What appeared to fix it was just going into the configuration manager dialog and then saving.
I am trying to install NCover in an existing C# .NET project for work. Unfortunately, after I download NCover and installed the Visual Studio extension, it wasn't finding any of the unit tests. The answers I've seen/heard seem to be in the vain of 'It wasn't working...time passed...it started working.'
I can run the tests with Visual Studio's Test Explorer, but I need to get NCover installed to see the code coverage. I had NCover installed previously, and other people on my team are getting it to work within the same project.
I am using Visual Studio 2013 with the newest version of NCover Desktop (v 5.1).
I am getting two errors in the console log.
The first switches between saying:
Agent Error (v4x64): An error occurred while loading assembly
and
Agent Error (v4x64): There was a problem loading test assembly [test path]. Could not get bytes from loader AppDomain
The second (after I try to run NCover) says it 'Could not load config' for the test dll.
I copied the 4 XML config file (Bolt.ext.config, Bolt.Extension2008.dll.config, NCover.exe.config, ncover.axplorer.exe.config) from one of my team members, so I'm pretty sure that I have my config correct.
Has anyone else experience this/have any suggestions? Help would be greatly appreciated!
Further information:
When I hover over the grayed out test dll in the bolt test panel, I get the following error:
Assembly is not loaded. Select and run to build and load this assembly
I was looking at this post, but it doesn't seem like any of the solutions are working for me...
After working with some of the other developers in my office, we discovered the issue was with the NCover version. For our tests to run, we needed to use NCover v5.0. Neither v5.1 or v5.2 would work with our setup. Not sure what changed in v5.1 that wouldn't let it find the tests, but I'm glad it's working now :)
I am having a few troubles with a set of hosted code on an WS2K8 R2 box with IIS 7. I have another server running WS2008 that does not encounter the same issue. I have copied the application code from the old server so that it is identical.
The exception thrown in my server side logs is:
"ModuleLoadException: The C++ module failed to load while attempting to initialize the default appdomain."
I also have an error being returned in VS2010 at the same time:
Unable to find assembly 'msvcm80, Version=8.0.50727.4927, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a'
I have checked and the correct version of msvcm80 is on the server in the "C:\Windows\winsxs" folder. I have also installed Microsoft Visual C++ 2005 Redistributable (x64) and (x86).
I cannot see why the error might be thrown??
My debugging expierence is low so please bear with me.
I re-checked the version details. It appears that it was a requirement of the Microsoft Visual C++ 2005 Redistributible. I re-installed all versions of it on the server and applied the security hotfixes.
After a re-boot and testing in IIS the issue has now gone from my log files.
I did check the comparison between the two servers and wasnt that happy copying the files over. I felt it was best to try this method first.
Thanks for your help.
msvcm80 is a .NET Framework mixed assembly (microsoft visual c++ managed + unmanaged). You might try to find this file on the second server and place near your application on the first server machine.
Note: .Net Framework Runtime requires exact version of an assembly (8.0.50727.4927 in your case).
I've written a C++ console application in Visual Studio 2019 and am trying to deploy it to another windows laptop. Both laptops are up-to-date with 64 bit Windows 10, and my target laptop has installed/up-to-date .NET Framework, vc_redist.x64.exe, and DirectX.
In terms of deployment method, I followed this Microsoft walkthrough word for word, with the added step of ensuring that my newly created "setup" project was also targeting x64 platform, since some of the external libraries in my code required x64. The resulting "setup" .exe/.msi pair work as planned on the source laptop - installs and runs with no frills required.
Installation goes fine on the target laptop, but launching the program gives the error mentioned in the title of this post. After a few hours of trying to figure it out, I think I have an idea where the problem is coming from, but first, I'll share what I've tried, which is basically every recommendation found by googling this error code:
clean boot
SFC scan
chkdsk c: /f /r
repairing/fresh installing all of the frameworks mentioned in the first paragraph
running both the application installer and the installed application as administrator
restarting laptop and reinstalling application after all of those changes
What I think is the root of the problem:
In the setup/deployment project in VS, three of the "detected dependencies" (MSVCP140D.dll, ucrtbased.dll, VCRUNTIME140D.dll) have filepaths through …\System32\ rather than the identical dependencies that could be found in …\SysWOW64. The other two detected dependencies are external 64-bit DLLs (which is why I specified my entire project to x64). When I run my application through Dependency Walker, it agrees that the three formerly mentioned dependencies are "wrong CPU type", while the two latter ones are fine. This scenario does not, however, explain to me why install/run (outside of VS) works fine on the source laptop (shouldn't it not work if VS is packaging a mix of 32 and 64 bit dependencies?). In fact, running the application through Dependency Walker on the source laptop reveals the exact same thing as on the target laptop - the same 3 dependencies are "wrong CPU type", yet the application runs here.
I do not see an option in VS to change the "setup" project to read the 64 bit filepath. I have tried manually swapping in the 64-bit DLLs at various stages (including restarting the computer between DLL swap and application run), which did not seem to have any effect. In fact, I tried replacing the 3 relevant DLLs in the System32 folder with the DLLs from the SysWOW64 folder (my idea of a cheap workaround for not being able to change the filepath - just change the file) and this just caused me to get the same error on my source laptop as I had been getting on my target laptop.
All of this stuff is relatively new to me, so please let me know if I'm foolishly overlooking some fundamental detail with my process/project - at this point it would be nice if that were the case and this is easy to fix.
Wrote this before I noticed the above comment had already answered.
Just leaving it in.
Debug Binary: Looks like you have deployed a debug version of your binary (The D in the file name: MSVCP140D.dll). Try to compile in Release mode and deploy the new binary.
Cause: Debug binaries generally need the debug-versions of the VCRedist binaries to exist on the box you try to run the binary - they are only available on developer PCs with the SDK (and / or Visual Studio) installed. That error message: 0xc000007b means "STATUS_INVALID_IMAGE_FORMAT".
Tips: There are some resource links here and some tips on how to debug deployment problems.