I have text file that contains thousands of words. For example:
carry
car
house
notebook
handbook
party
hurry
I want to print just words that ends on "rry". My output should include:
carry
hurry
Is this possible with grep or some other bash program?
Use Fixed Strings
If you're confident that your data won't include the pattern "rry" inside a word, it is faster to search for fixed strings than regular expressions. For example, the following commands are equivalent with GNU grep:
$ grep --fixed-strings rry /tmp/foo
$ fgrep rry /tmp/bar
Use Word Boundaries
As an alternative, if you only want to match words that end in "rry" you need to check for a word boundary or end-of-line marker. For example:
$ grep 'rry\b' /tmp/foo
grep rry$ sample.txt
Sample.txt:
1 carry
2 car
3 house
4 notebook
5 handbook
6 party
7 hurry
8 rryasdf
Prints
carry
hurry
Related
I have a large binary file. I want to extract certain strings from it and copy them to a new text file.
For example, in:
D-wM-^?^#^#^#^#^#^#^#^Y^#^#^#^#^#^#^#M-lM-FM-MM-[o#^B^#M-lM-FM MM-[o#^B^#^#^#^#^#E7cacscKLrrok9bwC3Z64NTnZM-^G
I want to take the number '7' (after the #^#^#E) and every character after it stopping at the Z ('ignoring the M-^G).
I want to copy this 7cacscKLrrok9bwC3Z64NTnZ to a new file.
There will be multiple such strings in one file. The end will always be denoted by the M- (which I don't want copied). The start will always be denoted by a 7 (which I do want copied).
Unfortunately, my knowledge of grep, sed, etc, does not extend to this level. Can someone please suggest a viable way to achieve this?
cat -v filename | grep [7][A-Z,a-z] will show all strings with a '7' followed by a letter but that's not much.
Thank you.
I've noticed that my requirements are rather more complicated.
(I've performed the correct - I hope - formatting this time). Thanks to 'tshiono' for his (?) answer to the earlier submission.
I want to check the ending of a string and, if it ends in M-, grep another string that follows it (with junk in between). If the string does not end in M-, then I don't want it copied (let alone any other strings).
So what I would like is:
grep -a -Po "7[[:alnum:]]+(?=M-)" file_name and if the ending is M- then grep -a -Po "5x[[:alnum:]]+(?=\^)" file_name to copy the string that starts with 5x and ends with a ^.
In this example:
D-wM-^?^#^#^#^#^#^#^#^Y^#^#^#^#^#^#^#M-lM-FM-MM-[o#^B^#M-lM-FM MM-[o#^B^#^#^#^#^#E7cacscKLrrok9bwC3Z64NTnZM-^GwM-^?^#^#^#^#^#^#^#^Y^#^#^#^#^#^#^#M-lM-FM-MM-[o#^B^#M-lM5x8w09qewqlkcklwnlkewflewfiewjfoewnflwenfwlkfwelk^89038432nowefe
The outcome would be:
7cacscKLrrok9bwC3Z64NTnZ
5x8w09qewqlkcklwnlkewflewfiewjfoewnflwenfwlkfwelk
However, if the ending is not M- (more precisely, if the ending is ^S), then do not try the second grep and do not record anything at all.
In this example:
D-wM-^?^#^#^#^#^#^#^#^Y^#^#^#^#^#^#^#M-lM-FM-MM-[o#^B^#M-lM-FM MM-[o#^B^#^#^#^#^#E7cacscKLrrok9bwC3Z64NTnZ^SGwM-^?^#^#^#^#^#^#^#^Y^#^#^#^#^#^#^#M-lM-FM-MM-[o#^B^#M-lM5x8w09qewqlkcklwnlkewflewfiewjfoewnflwenfwlkfwelk^89038432nowefe
The outcome would be null (nothing copied) as the 7cacs... string ends in ^S.
Is grep the correct tool? Grep a file and if the condition in the grep command is 'yes' then issue a different grep command but if the condition is 'no' then do nothing.
Thanks again.
I have noticed one addition modification.
Can one add an OR command to the second part? Grep if the second string starts with 5x OR 6x?
In the example below, grep -aPo "7[[:alnum:]]+M-.*?5x[[:alnum:]]+\^" filename | grep -aPo "7[[:alnum:]]+(?=M-)|5x[[:alnum:]]+(?=\^)" will extract the strings starting with 7 and the strings starting with 5x.
How can one change the 5x to 5x or 6x?
D-wM-^?^#^#^#^#^#^#^#^Y^#^#^#^#^#^#^#M-lM-FM-MM-[o#^B^#M-lM-FM MM-[o#^B^#^#^#^#^#E7cacscKLrrok9bwC3Z64NTnZM-^GwM-^?^#^#^#^#^#^#^#^Y^#^#^#^#^#^#^#M-lM-FM-MM-[o#^B^#M-lM5x8w09qewqlkcklwnlkewflewfiewjfoewnflwenfwlkfwelk^89038432nowefe
D-wM-^?^#^#^#^#^#^#^#^Y^#^#^#^#^#^#^#M-lM-FM-MM-[o#^B^#M-lM-FM MM-[o#^B^#^#^#^#^#E7AAAAAscKLrrok9bwC3Z64NTnZM-^GwM-^?^#^#^#^#^#^#^#^Y^#^#^#^#^#^#^#M-lM-FM-MM-[o#^B^#M-lM6x8w09qewqlkcklwnlkewflewfiewjfoewnflwenfwlkfwelk^89038432nowefe
In this example, the desired outcome would be:
7cacscKLrrok9bwC3Z64NTnZ
5x8w09qewqlkcklwnlkewflewfiewjfoewnflwenfwlkfwelk
7AAAAAscKLrrok9bwC3Z64NTnZ
6x8w09qewqlkcklwnlkewflewfiewjfoewnflwenfwlkfwelk
UPDATE MARCH 09:
I need to create a series of complex grep (or perl) commands to extract strings from a series of binary files.
I need two strings from the binary file.
The first string will always start with a 1.
The first string will end with a letter or number. The next letter will always be a lower case k. I do not want this k character.
The difficulty is that the ending k will not always be the first k in the string. It might be the first k but it might not.
After the k, there is a second string. The second string will always start with an A or a B.
The ending of the second string will be in one of two forms:
a) it will end with a space then display the first three characters from the first string in lower case followed by a )
b) it will end with a ^K then display the first three characters from the first string in lower case.
For example:
1pppsx9YPar8Rvs75tJYWZq3eo8PgwbckB4m4zT7Yg042KIDYUE82e893hY ppp)
Should be:
1pppsx9YPar8Rvs75tJYWZq3eo8Pgwbc and B4m4zT7Yg042KIDYUE82e893hY - delete the k and the space then ppp.
For example:
1zzzsx9YPkr8Rvs75tJYWZq3eo8PgwbckA2m4zT7Yg042KIDYUE82e893hY^Kzzz
Should be:
1zzzsx9YPkar8Rvs75tJYWZq3eo8Pgwbc and A4m4zT7Yg042KIDYUE82e893hY - delete the second k and the ^Kzzz.
In the second example, we see that the first k is part of the first string. It is the k before the A that breaks up the first and second strings.
I hope there is a super grep expert who can help! Many thanks!
If your grep supports -P option, would you please try:
grep -a -Po "7[[:alnum:]]+(?=M-)" file
The -a option forces grep to read the input as a text file.
The -P option enables the perl-compatible regex.
The -o option tells grep to print only the matched substring(s).
The pattern (?=M-) is a zero-width lookahead assertion (introduced in
Perl) without including it in the result.
Alternatively you can also say with sed:
sed 's/M-/\n/g' file | sed -n 's/.*\(7[[:alnum:]]\+\).*/\1/p'
The first sed command splits the input file into miltiple lines by
replacing the substring M- with a newline.
It has two benefits: it breaks the lines to allow multiple matches with
sed and excludes the unnecessary portion M- from the input.
The next sed command extracts the desired pattern from the input.
It assumes your sed accepts \n in the replacement, which is
a GNU extension (not POSIX compliant). Otherwise please try (in case you are working on bash):
sed 's/M-/\'$'\n''/g' file | sed -n 's/.*\(7[[:alnum:]]\+\).*/\1/p'
[UPDATE]
(The requirement has been updated by the OP and the followings are solutions according to it.)
Let me assume the string which starts with 7 and ends with M- is always followed
by another (no more and no less than one) string which starts with 5x and ends
with ^ (ascii caret character) with junks in between.
Then would you please try the following:
grep -aPo "7[[:alnum:]]+M-.*?5x[[:alnum:]]+\^" file | grep -aPo "7[[:alnum:]]+(?=M-)|5x[[:alnum:]]+(?=\^)"
It executes the task in two steps (two cascaded greps).
The 1st grep narrows down the input data into the candidate substring
which will include the desired two sequences and junks in between.
The regex .*? in between matches any (ascii or binary) characters
except for a newline character.
The trailing ? enables the shortest match
which avoids the overrun due to the greedy nature of regex. The regex is intended to match junks in between.
The 2nd grep includes two regex's merged with a pipe | meaning logical OR.
Then it extracts two desired sequences.
A potential problem of grep solution is that grep is a line oriented command
and cannot include the newline character in the matched string.
If a newline character is included in the junks in between (I'm not sure about the possibility), the above solution will fail.
As a workaround, perl will provide flexible manipulations with binary data.
perl -0777 -ne '
while (/(7[[:alnum:]]+)M-.*?(5x[[:alnum:]]+)\^/sg) {
printf("%s\n%s\n", $1, $2);
}
' file
The regex is mostly same as that of grep because the -P option of grep means
perl-compatible.
It can capture multiple patterns at once in variables $1 and $2 hence just one regex is enough.
The -0777 option to the perl command tells perl to slurp all data
at once.
The s option at the end the regex makes a dot match a newline character.
The g option enables the global (multiple) match.
[UPDATE2]
In order to make the regex match either 5x or 6x, replace 5x with (5|6)x.
Namely:
grep -aPo "7[[:alnum:]]+M-.*?(5|6)x[[:alnum:]]+\^" file | grep -aPo "7[[:alnum:]]+(?=M-)|(5|6)x[[:alnum:]]+(?=\^)"
As mentioned before, the pipe | means OR. The OR operator has the lowest priority in the evaluation, hence you need to enclose them with parens in this case.
If there is a possibility any other number than 5 or 6 may appear, it will be safer to put [[:digit:]] instead, which matches any one digit betweeen 0 and 9:
grep -aPo "7[[:alnum:]]+M-.*?[[:digit:]]x[[:alnum:]]+\^" file | grep -aPo "7[[:alnum:]]+(?=M-)|[[:digit:]]x[[:alnum:]]+(?=\^)"
[UPDATE3]
(Answering the OP's requirement on March 9th)
Let me start with a perl code which regex will be relatively easier
to explain.
perl -0777 -ne 'while (/(1(.{3}).+)k([AB].*)[\013 ]\2/g){print "$1 $3\n"}' file
Output:
1pppsx9YPar8Rvs75tJYWZq3eo8Pgwbc B4m4zT7Yg042KIDYUE82e893hY
1zzzsx9YPkr8Rvs75tJYWZq3eo8Pgwbc A2m4zT7Yg042KIDYUE82e893hY
[Explanation of regex]
(1(.{3}).+)k([AB].*)[\013 ]\2
( start of the 1st capture group referred by $1 later
1 literal "1"
( start of the 2nd capture group referred by \2 later
.{3} a sequence of the identical three characters such as ppp or zzz
) end of the 2nd capture group
.+ followed by any characters with "greedy" match which may include the 1st "k"
) end of the 1st capture group
k literal "k"
( start of the 3rd capture group referred by $3 later
[AB].* the character "A" or "B" followed by any characters
) end of the 3rd capture group
[\013 ] followed by ^K or a whitespace
\2 followed by the capture group 2 previously assigned
When implementing it with grep, we will encounter a limitation of grep.
Although we want to extract multiple patterns from the input file,
the -e option (which can specify multiple search patterns) does not
work with -P option. Then we need to split the regex into two patterns
such as:
grep -Po "(1(.{3}).+)(?=k([AB].*)[\013 ]\2)" file
grep -Po "(1(.{3}).+)k\K([AB].*)(?=[\013 ]\2)" file
And the result will be:
1pppsx9YPar8Rvs75tJYWZq3eo8Pgwbc
1zzzsx9YPkr8Rvs75tJYWZq3eo8Pgwbc
B4m4zT7Yg042KIDYUE82e893hY
A2m4zT7Yg042KIDYUE82e893hY
Please be noted the order of output is not same as the order of appearance in the original file.
Another option will be to introduce ripgrep or rg which is a fast
and versatile version of grep. You may need to install ripgrep with
sudo apt install ripgrep or using other package handling tool.
An advantage of ripgrep is it supports -r (replace) option in which
you can make use of the backreferences:
rg -N -Po "(1(.{3}).+)k([AB].*)[\013 ]\2" -r '$1 $3' file
The -r '$1 $3' option prints the 1st and the 3rd capture groups and the result will be the same as perl.
In the general case, you can use the strings utility to pluck out ASCII from binary files; then of course you can try to grep that output for patterns that you find interesting.
Many traditional Unix utilities like grep have internal special markers which might get messed up by binary input. For example, the character \xFF was used for internal purposes by some versions of GNU grep so you can't grep for that character even if you can figure out a way to represent it in the shell (Bash supports $'\xff' for example).
A traditional approach would be to run hexdump or a similar utility, and then grep that for patterns. However, more modern scripting languages like Perl and Python make it easy to manipulate arbitrary binary data.
perl -ne 'print if m/\xff\xff/' </dev/urandom
This might work for you (GNU sed):
sed -En '/\n/!{s/M-\^G/\n/;s/7[^\n]*\n/\n&/};/^7[^\n]*/P;D' file
Split each line into zero or more lines that begin with 7 and end just before M-^G and only print such lines.
I'm trying to filter out all the words that contain any character other than a letter from a text file. I've looked around stackoverflow, and other websites, but all the answers I found were very specific to a different scenario and I wasn't able to replicate them for my purposes; I've only recently started learning about Unix tools.
Here's an example of what I want to do:
Input:
#derik I was there and it was awesome! !! http://url.picture.whatever #hash_tag
Output:
I was there and it was awesome!
So words with punctuation can stay in the file (in fact I need them to stay) but any substring with special characters (including those of punctuation) needs to be trimmed away. This can probably be done with sed, but I just can't figure out the regex. Help.
Thanks!
Here is how it could be done using Perl:
perl -ane 'for $f (#F) {print "$f " if $f =~ /^([a-zA-z-\x27]+[?!;:,.]?|[\d.]+)$/} print "\n"' file
I am using this input text as my test case:
Hello,
How are you doing?
I'd like 2.5 cups of piping-hot coffee.
#derik I was there; it was awesome! !! http://url.picture.whatever #hash_tag
output:
Hello,
How are you doing?
I'd like 2.5 cups of piping-hot coffee.
I was there; it was awesome!
Command-line options:
-n loop around every line of the input file, do not automatically print it
-a autosplit mode – split input lines into the #F array. Defaults to splitting on whitespace
-e execute the perl code
The perl code splits each input line into the #F array, then loops over every field $f and decides whether or not to print it.
At the end of each line, print a newline character.
The regular expression ^([a-zA-z-\x27]+[?!;:,.]?|[\d.]+)$ is used on each whitespace-delimited word
^ starts with
[a-zA-Z-\x27]+ one or more lowercase or capital letters or a dash or a single quote (\x27)
[?!;:,.]? zero or one of the following punctuation: ?!;:,.
(|) alternately match
[\d.]+ one or more numbers or .
$ end
Your requirements aren't clear at all but this MAY be what you want:
$ awk '{rec=sep=""; for (i=1;i<=NF;i++) if ($i~/^[[:alpha:]]+[[:punct:]]?$/) { rec = rec sep $i; sep=" "} print rec}' file
I was there and it was awesome!
sed -E 's/[[:space:]][^a-zA-Z0-9[:space:]][^[:space:]]*//g' will get rid of any words starting with punctuation. Which will get you half way there.
[[:space:]] is any whitespace character
[^a-zA-Z0-9[:space:]] is any special character
[^[:space:]]* is any number of non whitespace characters
Do it again without a ^ instead of the first [[:space:]] to get remove those same words at the start of the line.
Unlike this previous question, I want to do this on a commandline (just grep).
How can I grep every number from a text file and display the results?
Sample text:
This is a sentence with 1 number, while the number 2 appears here, too.
I would expect to be able to extract the "1" and "2" from the text (my actual text is substantially longer, of course).
I think you want something like this,
$ echo 'This is a sentence with 1 number, while the number 2 appears here, too.' | grep -o '[0-9]\+'
1
2
Since basic sed uses BRE (Basic Regular Expression), you need to escape the + symbol so that it would repeat the previous character one or more times.
I am trying to find a specific pattern in a text file using grep inside a bourne shell script
The style is: word1 word2 word3
I want to print everything that is not of that style. So far I used
grep -e '[[:space:]]\{2,\}' somefile
to find more than 2 empty spaces between the words, but I cannot figure out how to make it so that the 3 word per line limit is retained.
My other method would be to also count how many words there are per line and if it exceeds 3, to print the line. Or to check for a white space at the end of the 3rd word, but I am unsure how that would be formatted.
I'm not sure if that's what you wanted, but here:
]$ cat input
one
one two
one two three
one two three four
]$ grep -v -e "^[^[:space:]]\+ [^[:space:]]\+ [^[:space:]]\+$" input
one
one two
one two three four
We match:
any number of not spaces: [^[:space:]]\+
until we get a space
repeated 3 times
all this should be in one line: ^...$
and we negate this with -v option
I am trying to cut down the file size of a kml file I have.
The coordinates for the polygons are this accurate:
-113.52106535153605,53.912817815321503,0.
I am not very good with regex, but I think it would be possible to write one that selects the eight characters before the commas. I'd run a search and replace so the result would be
-113.521065,53.9128178,0.
Any regex experts out there think this is possible?
Try this
\d{8}(?=,)
and replace with an empty string
See it here on Regexr
Here is something that might work. Replaces 8 chars and the coma with a coma: s/(.{8}),/,/g;
echo "-113.52106535153605,53.912817815321503,0." | sed 's/.\{8\},/,/'
So you can cat the file you have to a sed command like this:
cat file.kml | sed 's/.\{8\},/,/' > newfile.kml
I Just had to do the same thing. This is perl instead of sed, but it will look for a string of eight uninterrupted digits and then replace any number of uninterrupted digits after that with nothing. It worked great.
cat originalfile.kml | perl -pe 's/(?<=\d{8})\d*//g' > shortenedfile.kml