I have the following string:
<span class="pos">$2.472,38</span>
I would like to get 2472,38 (and eventually 2472.38)
I've been trying in regexpal, and found that [\d,.]+ seems to work, but due to the way the regex module of yahoo pipes work (replace ... with ..., I have to first select all the string
So I was thinking
replace .+([\d,.]+).+ with $1
But that's only giving me as result 8 (the last digit). So I guess something is not right the way I'm defining the capture group. any clue? Thanks in advance
you can find the pipe here http://pipes.yahoo.com/pipes/pipe.info?_id=06780ca250e5b107b7c1ef52455996ff
Your first subexpression .+ is being "greedy" (i.e. trying to match all it can while still allowing the whole expression to succeed), so it's matching everything up until the last digit. You need to "stop" before the start of the digits somehow based on your knowledge of what can precede the digits. If you know there is a dollar sign right before the digit and no dollar/digit combinations in the span element, you can simply add a \$ after the .+, as in .+\$([\d,.]+).+
Related
I'm looking for a way to use regex to search for obviously false phone numbers that have the same digit repeating. The numbers are all formatted and stored as follows:
(111)111-1111
I'm not able to alter the text in any way.
I've tried modifying a few of the regex lines I've seen such as:
^([0-9])\1{2}.\1{3}.\1{4}$
which was for finding repeating digits with a period in between the numbers. However, I haven't figured out how to get around the first character as a parenthesis.
Any help would be appreciated!
You misunderstand the purpose of the . Dot Operator. It is not to match a period, it matches anything. In that (quite badly) regex, it serves only to skip the - – and because it matches anything, it will also match something like 11121113111.
Use this regexp instead:
^\(?([0-9])\1{2}\)?\1{3}-?\1{4}$
This checks for parentheses around the first group, optionally so it will still work without; and specifically checks for the presence of a dash between the second and third group of digits, also optionally.
I am new to using regex. I am trying to use the regex find and replace option in Notepad++.
I have used the following regex:
((?:)|(\+)|(-))(\d)((?:)|(\+)|(-))(/)((?:)|(\+)|(-))(\d)((?:)|(\+)|(-))
For the following text:
2/2
+2/+2
-2/-2
2+/2+
2-/2-
But I am able to get matches only for the first three. The last two, it only gives partial matches, excluding the last "+" and the "-". I am wondering if there is any upper limit for the number of groups (which i doubt is unlikely) that can be used or any upper limit for the maximum length of the regex. I am not sure why my regex is failing. Or if there is anything wrong with my regex, please correct it.
This is not an issue with Notepad++'s regex engine. The problem is that when you have alternations like (?:)|(\+)|(-), the regex engine will attempt to match the different options in the order they are specified. Since you specified an empty group first, it will attempt to match an empty string first, only matching the + or - if it needs to backtrack. This essentially makes the alternation lazy—it will never match any character unless it has to.
vks's answer works perfectly well, but just in case you actually needed those capturing groups separated out, you can do the same thing just by rewriting your alternations like this:
((\+)|(-)|(?:))(\d)((\+)|(-)|(?:))(/)((\+)|(-)|(?:))(\d)((\+)|(-)|(?:))
or even more simply, like this:
((\+)|(-)|)(\d)((\+)|(-)|)(/)((\+)|(-)|)(\d)((\+)|(-)|)
([-+]?)(\d)([-+]?)(/)([-+]?)(\d)([-+]?)
You can use this simple regex to match all cases.See here.
https://www.regex101.com/r/fG5pZ8/19
I'm trying to write a rule to match on a top level domain followed by five digits. My problem arises because my existing pcre is matching on what I have described but much later in the URL then when I want it to. I want it to match on the first occurence of a TLD, not anywhere else. The easy way to check for this is to match on the TLD when it has not bee preceeded at some point by the "/" character. I tried using negative-lookbehind but that doesn't work because that only looks back one single character.
e.g.: How it is currently working
domain.net/stuff/stuff=www.google.com/12345
matches .com/12345 even though I do not want this match because it is not the first TLD in the URL
e.g.: How I want it to work
domain.net/12345/stuff=www.google.com/12345
matches on .net/12345 and ignores the later match on .com/12345
My current expression
(\.[a-z]{2,4})/\d{5}
EDIT: rewrote it so perhaps the problem is clearer in case anyone in the future has this same issue.
You're pretty close :)
You just need to be sure that before matching what you're looking for (i.e: (\.[a-z]{2,4})/\d{5}), you haven't met any / since the beginning of the line.
I would suggest you to simply preppend ^[^\/]*\. before your current regex.
Thus, the resulting regex would be:
^[^\/]*\.([a-z]{2,4})/\d{5}
How does it work?
^ asserts that this is the beginning of the tested String
[^\/]* accepts any sequence of characters that doesn't contain /
\.([a-z]{2,4})/\d{5} is the pattern you want to match (a . followed by 2 to 4 lowercase characters, then a / and at least 5 digits).
Here is a permalink to a working example on regex101.
Cheers!
You can use this regex:
'|^(\w+://)?([\w-]+\.)+\w+/\d{5}|'
Online Demo: http://regex101.com/
I have such txt file:
ххх.prontube.ru
salo.ru
bbb.antichat.ru
yyy.ru
xx.bb.prontube.ru
zzz.com
srfsf.jwbefw.com.ua
Trying to delete all subdomains with such regex:
Find: .+\.((.*?)\.(ru|ua|com\.ua|com|net|info))$
Replace with: \1
Receive:
prontube.ru
salo.ru
antichat.ru
yyy.ru
prontube.ru
zzz.com
com.ua
Why last line becomes com.ua instead of jwbefw.com.ua ?
This works without look around:
Find: [a-zA-Z0-9-.]+\.([a-zA-Z0-9-]+)\.([a-zA-Z0-9-]+)$
Replace: \1\.\2
It finds something with at least 2 periods and only letters, numbers, and dashes following the last two periods; then it replaces it with the last 2 parts. More intuitive, in my opinion.
There's something funny going on with that leading xxx. It doesn't appear to be plain ASCII. For the sake of this question, I'm going to assume that's just something funny with this site and not representative of your real data.
Incorrect
Interestingly, I previously had an incorrect answer here that accumulated a lot of upvotes. So I think I should preserve it:
Find: [a-zA-Z0-9-]+\.([a-zA-Z0-9-]+)\.(.+)$
Replace: \1\.\2
It just finds a host name with at least 2 periods in it, then replaces it with everything after the first dot.
The .+ part is matching as much as possible. Try using .+? instead, and it will capture the least possible, allowing the com.ua option to match.
.+?\.([\w-]*?\.(?:ru|ua|com\.ua|com|net|info))$
This answer still uses the specific domain names that the original question was looking at. As some TLD (top level domains) have a period in them, and you could theoretically have a list including multiple subdomains, whitelisting the TLD in the regex is a good idea if it works with your data set. Both current answers (from 2013) will not handle the difference between "xx.bb.prontube.ru" and "srfsf.jwbefw.com.ua" correctly.
Here is a quick explanation of why this psnig's original regex isn't working as intended:
The + is greedy.
.+ will zip all the way to the right at the end of the line capturing everything,
then work its way backwards (to the left) looking for a match from here:
(ru|ua|com\.ua|com|net|info)
With srfsf.jwbefw.com.ua the regex engine will first fail to match a,
then it will move the token one place to the left to look at "ua"
At that point, ua from the regex (the second option) is a match.
The engine will not keep looking to find "com.ua" because ".ua" met that requirement.
Niet the Dark Absol's answer tells the regex to be "lazy"
.+? will match any character (at least one) and then try to find the next part of the regex. If that fails, it will advance the token, .+ matching one more character and then evaluating the rest of the regex again.
The .+? will eventually consume: srfsf.jwbefw before matching the period, and then matching com.ua.
But the implimentation of ? also creates issues.
Adding in the question mark makes that first .+ lazy, but then causes group1 to match bb.prontube.ru instead of prontube.ru
This is because that first period after the bb will match, then inside group 1 (.*?) will match bb.prontube. before \.(ru|ua|com\.ua|com|net|info))$ matches .ru
To avoid this, change that third group from (.*?) to ([\w-]*?) so it won't capture . only letters and numbers, or a dash.
resulting regex:
.+?\.(([\w-])*?\.(ru|ua|com\.ua|com|net|info))$
Note that you don't need to capture any groups other than the first. Adding ?: makes the TLD options non-capturing.
last change:
.+?\.([\w-]*?\.(?:ru|ua|com\.ua|com|net|info))$
Search what: .+?\.(\w+\.(?:ru|com|com\.au))
Replace with: $1
Look in the picture above, what regex capture referring
It's color the way you will not need a regex explaination anymore ....
First timer and relatively inexperienced with RegEx and Notepad++. What I am trying to do is replace everything but the policy numbers in these two firewall session. Mind you, I have a list multiple lists 700+ lines long so I want to replace everything in one pass, leaving just the policy number for each line.
id 1978781/s23,vsys 0,flag 00200440/4000/0003,policy 4332,time 5972, dip 0 module 0
id 1997645/s23,vsys 0,flag 00200440/4000/0003,policy 30562,time 6283, dip 0 module 0
There are thousands of different policy numbers, so a simple search wont do.
I would like my lines to look like this after a replace.
4332
30562
After two hours of trying to learn RegEx for this one problem, I realized this its more involved than I expected, and I need to spend time learning this since its a very powerful tool. This could really save a lot of time, which unfortunately I don't have at the moment. I'm looking forward to learning more about RegEx and appreciate any help or direction you could give me.
Given the fact the lines always look the same you can use the following
^.+policy (\d+).+$
Replace by : $1
The dot is a wild card so , .+ means find everything before the word "policy ". Then find a group of digits (\d+ is for finding digits) and save them (thats what the parenthesis are for in many regex engines). Then find all the characters till the end of the line.
The ^ character means start of line. The $ means end of line.
You can try the following:
Find:
^.*policy ([0-9]+).*$
Replace with:
\1
Why does this work?
The dot matches any character, and the star means "zero or more of" the character preceding it. This means that .* matches everything.
What you want is to match everything before and after the policy and erase it, and keep just the policy number, so between your everything matchers you look for the string "policy xxxxx" where the xxxxx are numbers.
Each term surrounded by parenthesis in your regex is saved to be used in the replacement. I put parenthesis around the number matcher, [0-9]+ and then use what was matched in the repace part with \1. If your regex contains several parenthesized parts, you can get them with \1, \2, \3...
Regexes are really powerful, you should read a tutorial about them to learn what they can offer.