I have following scenario:
The main software I wrote uses a database created by a simulator. This database is around 10 GB big at the moment, so I want to keep only one copy of that data per system.
Assuming I have following projects:
Main Software using the data, located at /SimData
DLL using the data for debugging, searching for data at /SimData
Debugging tool to parse the image database, searching for the data at /SimData
Since I do not want to have all those programs have their own copy of SimData (not only to decrease place used, but also to ensure that all Simulation data used is always up to date for all programs).
I created for the DLL and Debugging Utility a link named SimData to MainSoftware/SimData, but when opening a file with "SimData\MyFile.data" it cannot find it, only the MainSoftware with the ACTUAL SimData folder can find it.
How can I use the MainSoftware/SimData folder without setting absolute paths?
This is on Windows 7 x64
I agree with Peter about adding the DB location as a configurable parameter. A common place to store that is in the registry.
however, If you want to create links that will be recognized by your software, try hardlinks. . fsutil should do the trick as described here.
You need a way to configure the database location. You could use an INI or other configuration file, or a registry setting, or a command-line input, or an environment variable. Or You could write your program to search a directory hierarchy... for example, if the various modules are usually siblings of each other in your directory tree, you could search for SimData/MyFile.data, ../SimData/MyFile.data, ../../MainSoftware/SimData/Myfile.data, and use the first one found.
Which answer is the "right one" depends on your situation.
Related
Recently I was trying to put a SQLite database into a QT 5 application I'm writing. I want it to be universally accessible - that is on all systems regardless of where it's installed. I put it as a resource then found out that evidently you can't put databases in resources as the string for the database path passed to setDatabaseName doesn't get translated to the resource system so the database can't be found.
So where can I put it? I don't want to just put it at the root of the drive like C:\repo.db or D:\repo.db as many people hate files cluttering their root directories (like me). I was going to put it just in the source folder and access it as "repo.db" or as I tried "./resources/database/repo.db" but even QFile doesn't see that. Where can I put it and how to access it there? My settings file was going to be in my resources but I wasn't sure if I could update the file then. I need a place that is available from the moment the application is installed on any system including my own so that it can be accessed both while coding it and when it's built.
I'm not asking for opinions - I want a place that is not in the root, somewhere universal like the installation directory (but how do I find that with code?) or a settings directory (but how do I set that somewhere so I can find it later??)
For such purposes Qt provides a list of QStandardPaths functions that return platform specific standard paths, such as a path to desktop, temp directory etc.
For your particular case you might put your database in the directory that corresponds to the QStandardPaths::AppDataLocation key.
You can use QSettings to save path,settings and restore them.
QSettings m_Arhive("Company", "app_name");
//Set DB path
m_Arhive.setValue("DBPath", "c:/somewhere/database");
//Get DB path
m_Arhive.value("DBPath").toString()
I'm taking over a project from a coworker that involves several extensive SAS process flows. I have all the files with all the same names and a copy of the process flows they used. Since the file paths in their processes are direct references to their computer, normally I would just re-import the files with the same output names and run the process from there. In a few cases I would have to recreate a query builder as I'm using a few .sas7bdat files from another project.
However, there are quite a few files involved and I may end up having to pass this to another coworker in a few months, and since I can't get a good look at exactly what the import task is doing I'm concerned I may have some of the variables imported incorrectly. Is there an easy way to just change the file path the import or other task refers to?
Given the updates in comments, there's two possibilities I see.
If the paths you're changing are, or can be, relative to the location of the EGP, then you can right click on the Project->Properties->File References and check "Use paths relative to the project...", which means instead of storing a file in c:\my EGP folder\my code folder\code.sas it would store it as my code folder\code.sas. So then if the whole project moves to another computer (or just any other folder) then it automatically has the right path. This is mostly useful for code or similar things.
Otherwise, you're going to have to convert things to SAS code modules. There you can use macro variables to define the locations of things.
Basically when I do sorting or join table in sas, the sas will use resources / space from local disk C: to process the code, but since I only have 100GB left on local disk C:, It will result in error whenever SAS was out of resources.
My question is how to configure / change the setting in SAS to use resources from Local Disk E: instead, since I have larger space there.
I already looking through the forum, but found no similiar question.
Please Help.
Assuming you are talking about desktop SAS, or a server that you administer, you can control where the work and utility folders are stored in a few ways.
The best way is to use the -work and -utilloc options in your sasv9.cfg file. That file can be in a few places, but often the SAS Shortcut you open SAS with specifies it with the -CONFIG option. You can also set the option in that shortcut with -WORK or -UTILLOC command line options. The article How SAS Finds and Processes Configuration Files can help you decide the location of the sasv9.cfg you want to modify; if you are using a personal copy on your own laptop, you may change the one in the Program Files folder, but if not, or if you don 't have administrative rights, you have other places you can place a config file that will override that one.
A paper that discusses a few of these options is one by Peter Eberhardt and Mengting Wang.
One way is to set up a library named user for projects that will be time intensive and this way you get it to be dynamic as needed. When you have a library called user, that becomes the default workspace instead of work. But, you need to clean up that library manually, it won't delete data sets automatically when you're done with it.
libname user '/folders/myfolders/demo';
As #Tom indicates, you can also set an option to use a library that already exists if desired.
options user = myLib;
An advantage of this method over the config file method as it only does it for projects where it's needed, rather than your full system.
Is there any way that I can get modified files/folders after a given timestamp in windows file system? I don't want to traverse entire file system and check which file/folder is modified in my code. Does windows provide any API which returns modified files/folders after a given time stamp ?
No, there is no direct WinAPI to accomplish this.
I'd suggest traversing only through certain folders (exclude folders like Windows, ProgramData) etc. Traverse only through the folders that make sense. ex: Users.
Why? Because the system files in Windows and such folders are accessed very frequently and are modified after system updates. Unless you're keen to see when the system files were modified, I'd say the data is going to be irrelevant and of no meaning.
I created application that store some data to XML file. The issues is with the path of the XML saving. Am using TinyXML to save the data in vc++.
When I deploy this application, it installs in "C:\Program files(x86)\applicationname " and when I run the application the XML file is saving in
"C:\Users\UserName\AppData\Local\VirtualStore\Program Files (x86)\ApplicationName ".
I have made this application to work on system startup. So when I restart this application,
the xml file is stored in different path "C:\Users\UserName\AppData\Local\VirtualStore\windows\sysWOW64"
I want my XML to be stored in the path where I installed or should be stored in appdata, application name
What should I do to store XML file in one places where application is installed?
doc.SaveFile( "test.xml" ); // xml saving code in tinyxml library
Firstly, this has nothing to do with C++, as the C++ code is probably working. Same with XML and tinyxml and even visual-c++.
It seems that windows redirects those write accesses to a user-specific "VirtualStore\Program Files", but I'll leave it to you to research the actual semantics of that. On startup, when there is no user, this path obviously differs, since the former user is not logged in.
Now, in order to get a fixed path, you can use the function GetModuleFileName() to find out the location of your executable and use that path to locate Smartmeter.xml. However, the problem you are facing now is that programs installed under "Program Files" don't magically gain write access rights to their install directory. This is to protect one user from messing with data of another user.
I think that what you are doing is writing a program that runs in the background, which would be called a "service" under MS Windows. What is still unclear is what you want to achieve with this file and also what you are planning to do overall, and these are things that decide the future steps. In any case, take a look at the possibilities that services provide, maybe there is something that fits your needs.