Related
I want to convert a string to an int and I don't mean ASCII codes.
For a quick run-down, we are passed in an equation as a string. We are to break it down, format it correctly and solve the linear equations. Now, in saying that, I'm not able to convert a string to an int.
I know that the string will be in either the format (-5) or (25) etc. so it's definitely an int. But how do we extract that from a string?
One way I was thinking is running a for/while loop through the string, check for a digit, extract all the digits after that and then look to see if there was a leading '-', if there is, multiply the int by -1.
It seems a bit over complicated for such a small problem though. Any ideas?
In C++11 there are some nice new convert functions from std::string to a number type.
So instead of
atoi( str.c_str() )
you can use
std::stoi( str )
where str is your number as std::string.
There are version for all flavours of numbers:
long stol(string), float stof(string), double stod(string),...
see http://en.cppreference.com/w/cpp/string/basic_string/stol
The possible options are described below:
1. sscanf()
#include <cstdio>
#include <string>
int i;
float f;
double d;
std::string str;
// string -> integer
if(sscanf(str.c_str(), "%d", &i) != 1)
// error management
// string -> float
if(sscanf(str.c_str(), "%f", &f) != 1)
// error management
// string -> double
if(sscanf(str.c_str(), "%lf", &d) != 1)
// error management
This is an error (also shown by cppcheck) because "scanf without field width limits can crash with huge input data on some versions of libc" (see here, and here).
2. std::sto()*
#include <iostream>
#include <string>
int i;
float f;
double d;
std::string str;
try {
// string -> integer
int i = std::stoi(str);
// string -> float
float f = std::stof(str);
// string -> double
double d = std::stod(str);
} catch (...) {
// error management
}
This solution is short and elegant, but it is available only on on C++11 compliant compilers.
3. sstreams
#include <string>
#include <sstream>
int i;
float f;
double d;
std::string str;
// string -> integer
std::istringstream ( str ) >> i;
// string -> float
std::istringstream ( str ) >> f;
// string -> double
std::istringstream ( str ) >> d;
// error management ??
However, with this solution is hard to distinguish between bad input (see here).
4. Boost's lexical_cast
#include <boost/lexical_cast.hpp>
#include <string>
std::string str;
try {
int i = boost::lexical_cast<int>( str.c_str());
float f = boost::lexical_cast<int>( str.c_str());
double d = boost::lexical_cast<int>( str.c_str());
} catch( boost::bad_lexical_cast const& ) {
// Error management
}
However, this is just a wrapper of sstream, and the documentation suggests to use sstream for better error management (see here).
5. strto()*
This solution is very long, due to error management, and it is described here. Since no function returns a plain int, a conversion is needed in case of integer (see here for how this conversion can be achieved).
6. Qt
#include <QString>
#include <string>
bool ok;
std::string;
int i = QString::fromStdString(str).toInt(&ok);
if (!ok)
// Error management
float f = QString::fromStdString(str).toFloat(&ok);
if (!ok)
// Error management
double d = QString::fromStdString(str).toDouble(&ok);
if (!ok)
// Error management
Conclusions
Summing up, the best solution is C++11 std::stoi() or, as a second option, the use of Qt libraries. All other solutions are discouraged or buggy.
std::istringstream ss(thestring);
ss >> thevalue;
To be fully correct you'll want to check the error flags.
use the atoi function to convert the string to an integer:
string a = "25";
int b = atoi(a.c_str());
http://www.cplusplus.com/reference/clibrary/cstdlib/atoi/
To be more exhaustive (and as it has been requested in comments), I add the solution given by C++17 using std::from_chars.
std::string str = "10";
int number;
std::from_chars(str.data(), str.data()+str.size(), number);
If you want to check whether the conversion was successful:
std::string str = "10";
int number;
auto [ptr, ec] = std::from_chars(str.data(), str.data()+str.size(), number);
assert(ec == std::errc{});
// ptr points to chars after read number
Moreover, to compare the performance of all these solutions, see the following quick-bench link: https://quick-bench.com/q/GBzK53Gc-YSWpEA9XskSZLU963Y
(std::from_chars is the fastest and std::istringstream is the slowest)
1. std::stoi
std::string str = "10";
int number = std::stoi(str);
2. string streams
std::string str = "10";
int number;
std::istringstream(str) >> number
3. boost::lexical_cast
#include <boost/lexical_cast.hpp>
std::string str = "10";
int number;
try
{
number = boost::lexical_cast<int>(str);
std::cout << number << std::endl;
}
catch (boost::bad_lexical_cast const &e) // bad input
{
std::cout << "error" << std::endl;
}
4. std::atoi
std::string str = "10";
int number = std::atoi(str.c_str());
5. sscanf()
std::string str = "10";
int number;
if (sscanf(str .c_str(), "%d", &number) == 1)
{
std::cout << number << '\n';
}
else
{
std::cout << "Bad Input";
}
What about Boost.Lexical_cast?
Here is their example:
The following example treats command line arguments as a sequence of numeric data:
int main(int argc, char * argv[])
{
using boost::lexical_cast;
using boost::bad_lexical_cast;
std::vector<short> args;
while(*++argv)
{
try
{
args.push_back(lexical_cast<short>(*argv));
}
catch(bad_lexical_cast &)
{
args.push_back(0);
}
}
...
}
Admittedly, my solution wouldn't work for negative integers, but it will extract all positive integers from input text containing integers. It makes use of numeric_only locale:
int main() {
int num;
std::cin.imbue(std::locale(std::locale(), new numeric_only()));
while ( std::cin >> num)
std::cout << num << std::endl;
return 0;
}
Input text:
the format (-5) or (25) etc... some text.. and then.. 7987...78hjh.hhjg9878
Output integers:
5
25
7987
78
9878
The class numeric_only is defined as:
struct numeric_only: std::ctype<char>
{
numeric_only(): std::ctype<char>(get_table()) {}
static std::ctype_base::mask const* get_table()
{
static std::vector<std::ctype_base::mask>
rc(std::ctype<char>::table_size,std::ctype_base::space);
std::fill(&rc['0'], &rc[':'], std::ctype_base::digit);
return &rc[0];
}
};
Complete online demo : http://ideone.com/dRWSj
In C++11 we can use "stoi" function to convert string into a int
#include <iostream>
#include <string>
using namespace std;
int main()
{
string s1 = "16";
string s2 = "9.49";
string s3 = "1226";
int num1 = stoi(s1);
int num2 = stoi(s2);
int num3 = stoi(s3);
cout << "stoi(\"" << s1 << "\") is " << num1 << '\n';
cout << "stoi(\"" << s2 << "\") is " << num2 << '\n';
cout << "stoi(\"" << s3 << "\") is " << num3 << '\n';
return 0;
}
It's probably a bit of overkill, but
boost::lexical_cast<int>( theString ) should to the job
quite well.
Well, lot of answers, lot of possibilities. What I am missing here is some universal method that converts a string to different C++ integral types (short, int, long, bool, ...).
I came up with following solution:
#include<sstream>
#include<exception>
#include<string>
#include<type_traits>
using namespace std;
template<typename T>
T toIntegralType(const string &str) {
static_assert(is_integral<T>::value, "Integral type required.");
T ret;
stringstream ss(str);
ss >> ret;
if ( to_string(ret) != str)
throw invalid_argument("Can't convert " + str);
return ret;
}
Here are examples of usage:
string str = "123";
int x = toIntegralType<int>(str); // x = 123
str = "123a";
x = toIntegralType<int>(str); // throws exception, because "123a" is not int
str = "1";
bool y = toIntegralType<bool>(str); // y is true
str = "0";
y = toIntegralType<bool>(str); // y is false
str = "00";
y = toIntegralType<bool>(str); // throws exception
Why not just use stringstream output operator to convert a string into an integral type?
Here is the answer:
Let's say a string contains a value that exceeds the limit for intended integral type. For examle, on Wndows 64 max int is 2147483647.
Let's assign to a string a value max int + 1: string str = "2147483648".
Now, when converting the string to an int:
stringstream ss(str);
int x;
ss >> x;
x becomes 2147483647, what is definitely an error: string "2147483648" was not supposed to be converted to the int 2147483647. The provided function toIntegralType spots such errors and throws exception.
In Windows, you could use:
const std::wstring hex = L"0x13";
const std::wstring dec = L"19";
int ret;
if (StrToIntEx(hex.c_str(), STIF_SUPPORT_HEX, &ret)) {
std::cout << ret << "\n";
}
if (StrToIntEx(dec.c_str(), STIF_SUPPORT_HEX, &ret)) {
std::cout << ret << "\n";
}
strtol,stringstream need to specify the base if you need to interpret hexdecimal.
I know this question is really old but I think there's a better way of doing this
#include <string>
#include <sstream>
bool string_to_int(std::string value, int * result) {
std::stringstream stream1, stream2;
std::string stringednumber;
int tempnumber;
stream1 << value;
stream1 >> tempnumber;
stream2 << tempnumber;
stream2 >> stringednumber;
if (!value.compare(stringednumber)) {
*result = tempnumber;
return true;
}
else return false;
}
If I wrote the code right, this will return a boolean value that tells you if the string was a valid number, if false, it wasn't a number, if true it was a number and that number is now result, you would call this this way:
std::string input;
std::cin >> input;
bool worked = string_to_int(input, &result);
You can use std::stringstream, here's an example:
#include <iostream>
#include <sstream>
using namespace std;
string r;
int main() {
cin >> r;
stringstream tmp(r);
int s;
tmp >> s;
cout << s;
return 0;
}
atoi is a built-in function that converts a string to an integer, assuming that the string begins with an integer representation.
http://www.cplusplus.com/reference/clibrary/cstdlib/atoi/
From http://www.cplusplus.com/reference/string/stoi/
// stoi example
#include <iostream> // std::cout
#include <string> // std::string, std::stoi
int main ()
{
std::string str_dec = "2001, A Space Odyssey";
std::string str_hex = "40c3";
std::string str_bin = "-10010110001";
std::string str_auto = "0x7f";
std::string::size_type sz; // alias of size_t
int i_dec = std::stoi (str_dec,&sz);
int i_hex = std::stoi (str_hex,nullptr,16);
int i_bin = std::stoi (str_bin,nullptr,2);
int i_auto = std::stoi (str_auto,nullptr,0);
std::cout << str_dec << ": " << i_dec << " and [" << str_dec.substr(sz) << "]\n";
std::cout << str_hex << ": " << i_hex << '\n';
std::cout << str_bin << ": " << i_bin << '\n';
std::cout << str_auto << ": " << i_auto << '\n';
return 0;
}
Output:
2001, A Space Odyssey: 2001 and [, A Space Odyssey]
40c3: 16579
-10010110001: -1201
0x7f: 127
My Code:
#include <iostream>
using namespace std;
int main()
{
string s="32"; //String
int n=stoi(s); //Convert to int
cout << n + 1 << endl;
return 0;
}
ll toll(string a){
ll ret=0;
bool minus=false;
for(auto i:a){
if(i=='-'){ minus=true; continue; }
ret*=10;
ret+=(i-'0');
} if(minus) ret*=-1;
return ret;
# ll is defined as, #define ll long long int
# usage: ll a = toll(string("-1234"));
}
To convert from string representation to integer value, we can use std::stringstream.
if the value converted is out of range for integer data type, it returns INT_MIN or INT_MAX.
Also if the string value can’t be represented as an valid int data type, then 0 is returned.
#include
#include
#include
int main() {
std::string x = "50";
int y;
std::istringstream(x) >> y;
std::cout << y << '\n';
return 0;
}
Output:
50
As per the above output, we can see it converted from string numbers to integer number.
Source and more at string to int c++
int stringToInt(std::string value) {
if(value.length() == 0 ) return 0; //tu zmiana..
if (value.find( std::string("NULL") ) != std::string::npos) {
return 0;
}
if (value.find( std::string("null") ) != std::string::npos) {
return 0;
}
int i;
std::stringstream stream1;
stream1.clear();
stream1.str(value);
stream1 >> i;
return i;
};
there is another easy way : suppose you have a character like c='4' therefore you can do one of these steps :
1st : int q
q=(int) c ; (q is now 52 in ascii table ) .
q=q-48; remember that adding 48 to digits is their ascii code .
the second way :
q=c-'0'; the same , character '0' means 48
One line version: long n = strtol(s.c_str(), NULL, base); .
(s is the string, and base is an int such as 2, 8, 10, 16.)
You can refer to this link for more details of strtol.
The core idea is to use strtol function, which is included in cstdlib.
Since strtol only handles with char array, we need to convert string to char array. You can refer to this link.
An example:
#include <iostream>
#include <string> // string type
#include <bitset> // bitset type used in the output
int main(){
s = "1111000001011010";
long t = strtol(s.c_str(), NULL, 2); // 2 is the base which parse the string
cout << s << endl;
cout << t << endl;
cout << hex << t << endl;
cout << bitset<16> (t) << endl;
return 0;
}
which will output:
1111000001011010
61530
f05a
1111000001011010
I think that converting from int to std::string or vice versa needs some special functions like std::stoi()
but if you need to convert a double into a string use to_string() (NOT C#. C# is .ToString() not to_string())
If you wot hard code :)
bool strCanBeInt(std::string string){
for (char n : string) {
if (n != '0' && n != '1' && n != '2' && n != '3' && n != '4' && n != '5'
&& n != '6' && n != '7' && n != '8' && n != '9') {
return false;
}
}
return true;
}
int strToInt(std::string string) {
int integer = 0;
int numInt;
for (char n : string) {
if(n == '0') numInt = 0;
if(n == '1') numInt = 1;
if(n == '2') numInt = 2;
if(n == '3') numInt = 3;
if(n == '4') numInt = 4;
if(n == '5') numInt = 5;
if(n == '6') numInt = 6;
if(n == '7') numInt = 7;
if(n == '8') numInt = 8;
if(n == '9') numInt = 9;
if (integer){
integer *= 10;
}
integer += numInt;
}
return integer;
}
I have string like "y.x-name', where y and x are number ranging from 0 to 100. From this string, what would be the best method to extract 'x' into an integer variable in C++.
You could split the string by . and convert it to integer type directly. The second number in while loop is the one you want, see sample code:
template<typename T>
T stringToDecimal(const string& s)
{
T t = T();
std::stringstream ss(s);
ss >> t;
return t;
}
int func()
{
string s("100.3-name");
std::vector<int> v;
std::stringstream ss(s);
string line;
while(std::getline(ss, line, '.'))
{
v.push_back(stringToDecimal<int>(line));
}
std::cout << v.back() << std::endl;
}
It will output: 3
It seem that this thread has a problem similar to you, it might help ;)
Simple string parsing with C++
You can achieve it with boost::lexical_cast, which utilizes streams like in billz' answer:
Pseudo code would look like this (indices might be wrong in that example):
std::string yxString = "56.74-name";
size_t xStart = yxString.find(".") + 1;
size_t xLength = yxString.find("-") - xStart;
int x = boost::lexical_cast<int>( yxString + xStart, xLength );
Parsing errors can be handled via exceptions that are thrown by lexical_cast.
For more flexible / powerful text matching I suggest boost::regex.
Use two calls to unsigned long strtoul( const char *str, char **str_end, int base ), e.g:
#include <cstdlib>
#include <iostream>
using namespace std;
int main(){
char const * s = "1.99-name";
char *endp;
unsigned long l1 = strtoul(s,&endp,10);
if (endp == s || *endp != '.') {
cerr << "Bad parse" << endl;
return EXIT_FAILURE;
}
s = endp + 1;
unsigned long l2 = strtoul(s,&endp,10);
if (endp == s || *endp != '-') {
cerr << "Bad parse" << endl;
return EXIT_FAILURE;
}
cout << "num 1 = " << l1 << "; num 2 = " << l2 << endl;
return EXIT_FAILURE;
}
I have a string: (66)
Then I convert it to double and do some math: atof(t.c_str()) / 30
then I convert it back to string: string s = boost::lexical_cast<string>(hizdegerd)
Problem is when I show it on label it becomes 2,20000001.
I've tried everything. sprintf etc.
I want to show only one digit after point.
hizdegerd = atof(t.c_str()) / 30;
char buffer [50];
hizdegerd=sprintf (buffer, "%2.2f",hizdegerd);
if(oncekideger != hizdegerd)
{
txtOyunHiz->SetValue(hizdegerd);
oncekideger = hizdegerd;
}
I think I'd wrap the formatting up into a function template, something like this:
#include <iostream>
#include <sstream>
#include <iomanip>
template <class T>
std::string fmt(T in, int width = 0, int prec = 0) {
std::ostringstream s;
s << std::setw(width) << std::setprecision(prec) << in;
return s.str();
}
int main(){
std::string s = fmt(66.0 / 30.0, 2, 2);
std::cout << s << "\n";
}
You can use this way of conversion back to string and then only the wished number of digits for the precision will be taken in consideration:
ostringstream a;
a.precision(x); // the number of precision digits will be x-1
double b = 1.45612356;
a << b;
std::string s = a.str();
Since you wrote "I want to show":
#include<iostream>
#include<iomanip>
int main()
{
std::cout << std::fixed << std::setprecision(1) << 34.2356457;
}
Output:
34.2
By the way, sprintf is buffer-overflow-vulnerable and is not C++ .
I want to convert a string to an int and I don't mean ASCII codes.
For a quick run-down, we are passed in an equation as a string. We are to break it down, format it correctly and solve the linear equations. Now, in saying that, I'm not able to convert a string to an int.
I know that the string will be in either the format (-5) or (25) etc. so it's definitely an int. But how do we extract that from a string?
One way I was thinking is running a for/while loop through the string, check for a digit, extract all the digits after that and then look to see if there was a leading '-', if there is, multiply the int by -1.
It seems a bit over complicated for such a small problem though. Any ideas?
In C++11 there are some nice new convert functions from std::string to a number type.
So instead of
atoi( str.c_str() )
you can use
std::stoi( str )
where str is your number as std::string.
There are version for all flavours of numbers:
long stol(string), float stof(string), double stod(string),...
see http://en.cppreference.com/w/cpp/string/basic_string/stol
The possible options are described below:
1. sscanf()
#include <cstdio>
#include <string>
int i;
float f;
double d;
std::string str;
// string -> integer
if(sscanf(str.c_str(), "%d", &i) != 1)
// error management
// string -> float
if(sscanf(str.c_str(), "%f", &f) != 1)
// error management
// string -> double
if(sscanf(str.c_str(), "%lf", &d) != 1)
// error management
This is an error (also shown by cppcheck) because "scanf without field width limits can crash with huge input data on some versions of libc" (see here, and here).
2. std::sto()*
#include <iostream>
#include <string>
int i;
float f;
double d;
std::string str;
try {
// string -> integer
int i = std::stoi(str);
// string -> float
float f = std::stof(str);
// string -> double
double d = std::stod(str);
} catch (...) {
// error management
}
This solution is short and elegant, but it is available only on on C++11 compliant compilers.
3. sstreams
#include <string>
#include <sstream>
int i;
float f;
double d;
std::string str;
// string -> integer
std::istringstream ( str ) >> i;
// string -> float
std::istringstream ( str ) >> f;
// string -> double
std::istringstream ( str ) >> d;
// error management ??
However, with this solution is hard to distinguish between bad input (see here).
4. Boost's lexical_cast
#include <boost/lexical_cast.hpp>
#include <string>
std::string str;
try {
int i = boost::lexical_cast<int>( str.c_str());
float f = boost::lexical_cast<int>( str.c_str());
double d = boost::lexical_cast<int>( str.c_str());
} catch( boost::bad_lexical_cast const& ) {
// Error management
}
However, this is just a wrapper of sstream, and the documentation suggests to use sstream for better error management (see here).
5. strto()*
This solution is very long, due to error management, and it is described here. Since no function returns a plain int, a conversion is needed in case of integer (see here for how this conversion can be achieved).
6. Qt
#include <QString>
#include <string>
bool ok;
std::string;
int i = QString::fromStdString(str).toInt(&ok);
if (!ok)
// Error management
float f = QString::fromStdString(str).toFloat(&ok);
if (!ok)
// Error management
double d = QString::fromStdString(str).toDouble(&ok);
if (!ok)
// Error management
Conclusions
Summing up, the best solution is C++11 std::stoi() or, as a second option, the use of Qt libraries. All other solutions are discouraged or buggy.
std::istringstream ss(thestring);
ss >> thevalue;
To be fully correct you'll want to check the error flags.
use the atoi function to convert the string to an integer:
string a = "25";
int b = atoi(a.c_str());
http://www.cplusplus.com/reference/clibrary/cstdlib/atoi/
To be more exhaustive (and as it has been requested in comments), I add the solution given by C++17 using std::from_chars.
std::string str = "10";
int number;
std::from_chars(str.data(), str.data()+str.size(), number);
If you want to check whether the conversion was successful:
std::string str = "10";
int number;
auto [ptr, ec] = std::from_chars(str.data(), str.data()+str.size(), number);
assert(ec == std::errc{});
// ptr points to chars after read number
Moreover, to compare the performance of all these solutions, see the following quick-bench link: https://quick-bench.com/q/GBzK53Gc-YSWpEA9XskSZLU963Y
(std::from_chars is the fastest and std::istringstream is the slowest)
1. std::stoi
std::string str = "10";
int number = std::stoi(str);
2. string streams
std::string str = "10";
int number;
std::istringstream(str) >> number
3. boost::lexical_cast
#include <boost/lexical_cast.hpp>
std::string str = "10";
int number;
try
{
number = boost::lexical_cast<int>(str);
std::cout << number << std::endl;
}
catch (boost::bad_lexical_cast const &e) // bad input
{
std::cout << "error" << std::endl;
}
4. std::atoi
std::string str = "10";
int number = std::atoi(str.c_str());
5. sscanf()
std::string str = "10";
int number;
if (sscanf(str .c_str(), "%d", &number) == 1)
{
std::cout << number << '\n';
}
else
{
std::cout << "Bad Input";
}
What about Boost.Lexical_cast?
Here is their example:
The following example treats command line arguments as a sequence of numeric data:
int main(int argc, char * argv[])
{
using boost::lexical_cast;
using boost::bad_lexical_cast;
std::vector<short> args;
while(*++argv)
{
try
{
args.push_back(lexical_cast<short>(*argv));
}
catch(bad_lexical_cast &)
{
args.push_back(0);
}
}
...
}
Admittedly, my solution wouldn't work for negative integers, but it will extract all positive integers from input text containing integers. It makes use of numeric_only locale:
int main() {
int num;
std::cin.imbue(std::locale(std::locale(), new numeric_only()));
while ( std::cin >> num)
std::cout << num << std::endl;
return 0;
}
Input text:
the format (-5) or (25) etc... some text.. and then.. 7987...78hjh.hhjg9878
Output integers:
5
25
7987
78
9878
The class numeric_only is defined as:
struct numeric_only: std::ctype<char>
{
numeric_only(): std::ctype<char>(get_table()) {}
static std::ctype_base::mask const* get_table()
{
static std::vector<std::ctype_base::mask>
rc(std::ctype<char>::table_size,std::ctype_base::space);
std::fill(&rc['0'], &rc[':'], std::ctype_base::digit);
return &rc[0];
}
};
Complete online demo : http://ideone.com/dRWSj
In C++11 we can use "stoi" function to convert string into a int
#include <iostream>
#include <string>
using namespace std;
int main()
{
string s1 = "16";
string s2 = "9.49";
string s3 = "1226";
int num1 = stoi(s1);
int num2 = stoi(s2);
int num3 = stoi(s3);
cout << "stoi(\"" << s1 << "\") is " << num1 << '\n';
cout << "stoi(\"" << s2 << "\") is " << num2 << '\n';
cout << "stoi(\"" << s3 << "\") is " << num3 << '\n';
return 0;
}
It's probably a bit of overkill, but
boost::lexical_cast<int>( theString ) should to the job
quite well.
Well, lot of answers, lot of possibilities. What I am missing here is some universal method that converts a string to different C++ integral types (short, int, long, bool, ...).
I came up with following solution:
#include<sstream>
#include<exception>
#include<string>
#include<type_traits>
using namespace std;
template<typename T>
T toIntegralType(const string &str) {
static_assert(is_integral<T>::value, "Integral type required.");
T ret;
stringstream ss(str);
ss >> ret;
if ( to_string(ret) != str)
throw invalid_argument("Can't convert " + str);
return ret;
}
Here are examples of usage:
string str = "123";
int x = toIntegralType<int>(str); // x = 123
str = "123a";
x = toIntegralType<int>(str); // throws exception, because "123a" is not int
str = "1";
bool y = toIntegralType<bool>(str); // y is true
str = "0";
y = toIntegralType<bool>(str); // y is false
str = "00";
y = toIntegralType<bool>(str); // throws exception
Why not just use stringstream output operator to convert a string into an integral type?
Here is the answer:
Let's say a string contains a value that exceeds the limit for intended integral type. For examle, on Wndows 64 max int is 2147483647.
Let's assign to a string a value max int + 1: string str = "2147483648".
Now, when converting the string to an int:
stringstream ss(str);
int x;
ss >> x;
x becomes 2147483647, what is definitely an error: string "2147483648" was not supposed to be converted to the int 2147483647. The provided function toIntegralType spots such errors and throws exception.
In Windows, you could use:
const std::wstring hex = L"0x13";
const std::wstring dec = L"19";
int ret;
if (StrToIntEx(hex.c_str(), STIF_SUPPORT_HEX, &ret)) {
std::cout << ret << "\n";
}
if (StrToIntEx(dec.c_str(), STIF_SUPPORT_HEX, &ret)) {
std::cout << ret << "\n";
}
strtol,stringstream need to specify the base if you need to interpret hexdecimal.
I know this question is really old but I think there's a better way of doing this
#include <string>
#include <sstream>
bool string_to_int(std::string value, int * result) {
std::stringstream stream1, stream2;
std::string stringednumber;
int tempnumber;
stream1 << value;
stream1 >> tempnumber;
stream2 << tempnumber;
stream2 >> stringednumber;
if (!value.compare(stringednumber)) {
*result = tempnumber;
return true;
}
else return false;
}
If I wrote the code right, this will return a boolean value that tells you if the string was a valid number, if false, it wasn't a number, if true it was a number and that number is now result, you would call this this way:
std::string input;
std::cin >> input;
bool worked = string_to_int(input, &result);
You can use std::stringstream, here's an example:
#include <iostream>
#include <sstream>
using namespace std;
string r;
int main() {
cin >> r;
stringstream tmp(r);
int s;
tmp >> s;
cout << s;
return 0;
}
atoi is a built-in function that converts a string to an integer, assuming that the string begins with an integer representation.
http://www.cplusplus.com/reference/clibrary/cstdlib/atoi/
From http://www.cplusplus.com/reference/string/stoi/
// stoi example
#include <iostream> // std::cout
#include <string> // std::string, std::stoi
int main ()
{
std::string str_dec = "2001, A Space Odyssey";
std::string str_hex = "40c3";
std::string str_bin = "-10010110001";
std::string str_auto = "0x7f";
std::string::size_type sz; // alias of size_t
int i_dec = std::stoi (str_dec,&sz);
int i_hex = std::stoi (str_hex,nullptr,16);
int i_bin = std::stoi (str_bin,nullptr,2);
int i_auto = std::stoi (str_auto,nullptr,0);
std::cout << str_dec << ": " << i_dec << " and [" << str_dec.substr(sz) << "]\n";
std::cout << str_hex << ": " << i_hex << '\n';
std::cout << str_bin << ": " << i_bin << '\n';
std::cout << str_auto << ": " << i_auto << '\n';
return 0;
}
Output:
2001, A Space Odyssey: 2001 and [, A Space Odyssey]
40c3: 16579
-10010110001: -1201
0x7f: 127
My Code:
#include <iostream>
using namespace std;
int main()
{
string s="32"; //String
int n=stoi(s); //Convert to int
cout << n + 1 << endl;
return 0;
}
ll toll(string a){
ll ret=0;
bool minus=false;
for(auto i:a){
if(i=='-'){ minus=true; continue; }
ret*=10;
ret+=(i-'0');
} if(minus) ret*=-1;
return ret;
# ll is defined as, #define ll long long int
# usage: ll a = toll(string("-1234"));
}
To convert from string representation to integer value, we can use std::stringstream.
if the value converted is out of range for integer data type, it returns INT_MIN or INT_MAX.
Also if the string value can’t be represented as an valid int data type, then 0 is returned.
#include
#include
#include
int main() {
std::string x = "50";
int y;
std::istringstream(x) >> y;
std::cout << y << '\n';
return 0;
}
Output:
50
As per the above output, we can see it converted from string numbers to integer number.
Source and more at string to int c++
int stringToInt(std::string value) {
if(value.length() == 0 ) return 0; //tu zmiana..
if (value.find( std::string("NULL") ) != std::string::npos) {
return 0;
}
if (value.find( std::string("null") ) != std::string::npos) {
return 0;
}
int i;
std::stringstream stream1;
stream1.clear();
stream1.str(value);
stream1 >> i;
return i;
};
error handling not done
int myatoti(string ip)
{
int ret = 0;
int sign = 1;
if (ip[0] == '-')
{
ip.erase(0, 1);
sign = -1;
}
int p = 0;
for (auto it = ip.rbegin(); it != ip.rend(); it++)
{
int val = *it - 48;
int hun = 1;
for (int k = 0; k < p; k++)
{
hun *= 10;
}
ret += val * hun;
p++;
}
return ret * sign;
}
there is another easy way : suppose you have a character like c='4' therefore you can do one of these steps :
1st : int q
q=(int) c ; (q is now 52 in ascii table ) .
q=q-48; remember that adding 48 to digits is their ascii code .
the second way :
q=c-'0'; the same , character '0' means 48
One line version: long n = strtol(s.c_str(), NULL, base); .
(s is the string, and base is an int such as 2, 8, 10, 16.)
You can refer to this link for more details of strtol.
The core idea is to use strtol function, which is included in cstdlib.
Since strtol only handles with char array, we need to convert string to char array. You can refer to this link.
An example:
#include <iostream>
#include <string> // string type
#include <bitset> // bitset type used in the output
int main(){
s = "1111000001011010";
long t = strtol(s.c_str(), NULL, 2); // 2 is the base which parse the string
cout << s << endl;
cout << t << endl;
cout << hex << t << endl;
cout << bitset<16> (t) << endl;
return 0;
}
which will output:
1111000001011010
61530
f05a
1111000001011010
I think that converting from int to std::string or vice versa needs some special functions like std::stoi()
but if you need to convert a double into a string use to_string() (NOT C#. C# is .ToString() not to_string())
If you wot hard code :)
bool strCanBeInt(std::string string){
for (char n : string) {
if (n != '0' && n != '1' && n != '2' && n != '3' && n != '4' && n != '5'
&& n != '6' && n != '7' && n != '8' && n != '9') {
return false;
}
}
return true;
}
int strToInt(std::string string) {
int integer = 0;
int numInt;
for (char n : string) {
if(n == '0') numInt = 0;
if(n == '1') numInt = 1;
if(n == '2') numInt = 2;
if(n == '3') numInt = 3;
if(n == '4') numInt = 4;
if(n == '5') numInt = 5;
if(n == '6') numInt = 6;
if(n == '7') numInt = 7;
if(n == '8') numInt = 8;
if(n == '9') numInt = 9;
if (integer){
integer *= 10;
}
integer += numInt;
}
return integer;
}
I would like to know what is the easiest way to convert an int to C++ style string and from C++ style string to int.
edit
Thank you very much. When converting form string to int what happens if I pass a char string ? (ex: "abce").
Thanks & Regards,
Mousey
Probably the easiest is to use operator<< and operator>> with a stringstream (you can initialize a stringstream from a string, and use the stream's .str() member to retrieve a string after writing to it.
Boost has a lexical_cast that makes this particularly easy (though hardly a paragon of efficiency). Normal use would be something like int x = lexical_cast<int>(your_string);
You can change "%x" specifier to "%d" or any other format supported by sprintf. Ensure to appropriately adjust the buffer size 'buf'
int main(){
char buf[sizeof(int)*2 + 1];
int x = 0x12345678;
sprintf(buf, "%x", x);
string str(buf);
int y = atoi(str.c_str());
}
EDIT 2:
int main(){
char buf[sizeof(int)*2 + 1];
int x = 42;
sprintf(buf, "%x", x);
string str(buf);
//int y = atoi(str.c_str());
int y = static_cast<int>(strtol(str.c_str(), NULL, 16));
}
This is to convert string to number.
#include "stdafx.h"
#include <iostream>
#include <string>
#include <sstream>
int convert_string_to_number(const std::string& st)
{
std::istringstream stringinfo(st);
int num = 0;
stringinfo >> num;
return num;
}
int main()
{
int number = 0;
std::string number_as_string("425");
number = convert_string_to_number(number_as_string);
std::cout << "The number is " << number << std::endl;
std::cout << "Number of digits are " << number_as_string.length() << std::endl;
}
Like wise, the following is to convert number to string.
#include "stdafx.h"
#include <iostream>
#include <string>
#include <sstream>
std::string convert_number_to_string(const int& number_to_convert)
{
std::ostringstream os;
os << number_to_convert;
return (os.str());
}
int main()
{
int number = 425;
std::string stringafterconversion;
stringafterconversion = convert_number_to_string(number);
std::cout << "After conversion " << stringafterconversion << std::endl;
std::cout << "Number of digits are " << stringafterconversion.length() << std::endl;
}
Use atoi to convert a string to an int. Use a stringstream to convert the other way.