I am working on a background texture. What I want to do is that I want to set a background image. For that in my code I used switch to ortho, draw a square full of window size, texture it. Then switch back to 3d and draw 3d images. It draw the background texture and snowman but they all disappear in a sec. I have no idea where the error code is. gotta have something to do with pushing and popping the matrix I think. Below is the code of my InitGl, draw() and drawsnowman(), main and reshape(). I think the problem is in draw() function during the swithc between 3D to 2d. Advice?
int main (int argc, char **argv)
{
glutInit (&argc, argv);
glutInitDisplayMode (GLUT_DOUBLE);
glutInitWindowSize (500, 500);
glutInitWindowPosition (100, 100);
glutCreateWindow ("A basic OpenGL Window");
glutKeyboardFunc(key);
if( !initGL() ) { // NEW (16)
printf( "Unable to initialize graphics library!\n" );
return 1;
}
glutDisplayFunc (display);
// glutIdleFunc (display);
glutIdleFunc(idle);
glutReshapeFunc (reshape);
//Load our texture
texture = LoadTexture( "texture.bmp", 256, 256 );
glutMainLoop ();
//Free our texture
FreeTexture( texture );
return 0;
}
void drawSnowMan(void)
{
GLUquadricObj *pObj;
//glDisable(GL_TEXTURE_2D);
glEnable(GL_CULL_FACE);
glCullFace(GL_BACK);
glEnable(GL_DEPTH_TEST);
glDepthFunc(GL_LESS);
// save the world matrix
glPushMatrix();
glTranslatef(xpos, -0.5, -5.0);
glRotated(rotX,1,0,0); // ******** NEW (11)
glRotated(rotY,0,1,0);
pObj = gluNewQuadric();
gluQuadricNormals(pObj, GLU_SMOOTH);
//glRotated(rotZ,0,0,1);
glPushMatrix();
//setting up light effect for base, mid and head spheres. all red!
ambient[0] = 1.0; ambient[1] = 0.0; ambient[2] = 0.0;
diffuse[0] = 1.0; diffuse[1] = 0.0; diffuse[2] = 0.0;
specular[0] = 0.7; specular[1] = 0.6; specular[2] = 0.5;
glMaterialfv(GL_FRONT, GL_AMBIENT, ambient);
glMaterialfv(GL_FRONT, GL_DIFFUSE, diffuse);
glMaterialfv(GL_FRONT, GL_SPECULAR, specular);
glMaterialfv(GL_FRONT, GL_SHININESS, shiness);
glEnable(GL_LIGHTING);
glEnable(GL_LIGHT0);
//glTranslatef(0.0 ,0.75f, 0.0f);
//bottom sphere. dont need to gltranslate again because it will use the previous gltranslate
//which is declared outside
glutSolidSphere(0.70f,20,20);
//mid sphere
glTranslatef(0.0f, 1.0f, 0.0f);
glutSolidSphere(0.45f,20,20);
//top sphere
glTranslatef(0.0f, 0.6f, 0.0f);
glutSolidSphere(0.30f,20,20);
//eyes
glDisable(GL_LIGHTING);
glDisable(GL_LIGHT0);
glPopMatrix();
//drawing hat
glPushMatrix();
//black color. move it 1.85 in y position because thats where the head is
//rotate the cylinder and draw cylinder
glColor3f(0.0f, 0.0f, 0.0f);
glTranslatef(0.0f, 1.85f, 0.0f);
glRotatef(-90.0f, 1.0f, 0.0f, 0.0f);
gluCylinder(pObj, 0.17f, 0.17f, 0.4f, 26, 13);
//drawing brim. disable cull_face. draw disk, so front part. disabl
glDisable(GL_CULL_FACE);
gluDisk(pObj, 0.17f, 0.28f, 26, 13);
glEnable(GL_CULL_FACE);
glTranslatef(0.0f, 0.0f, 0.40f);
gluDisk(pObj, 0.17f, 0.28f, 26, 13);
glPopMatrix();
glPushMatrix();
glPushMatrix();
glColor3f(1.0,1.0,1.0);
glTranslatef(2.0f, 1.0f, 0.0f);
glRotatef(90.0,0.0, 0.0,-5.0);
glScalef (0.01, 0.2, 0.06); /* modeling transformation */
//glutSolidCone(0.1, 0.1, 10.0, 14.0);
glutSolidCube(1.5);
glPopMatrix();
glPushMatrix();
glTranslatef(2.0f, 0.8f, 0.0f);
glRotatef(-90.0f, 1.0f, 0.0f, 0.0f);
gluCylinder(pObj, 0.04f, 0.04f, 0.2f, 26, 13);
glPopMatrix();
//blade
glPushMatrix();
ambient[0] = 0.0; ambient[1] = 1.0; ambient[2] = 0.0;
diffuse[0] = 1.0; diffuse[1] = 0.0; diffuse[2] = 0.0;
specular[0] = 0.7; specular[1] = 0.6; specular[2] = 0.5;
glMaterialfv(GL_FRONT, GL_AMBIENT, ambient);
glMaterialfv(GL_FRONT, GL_DIFFUSE, diffuse);
glMaterialfv(GL_FRONT, GL_SPECULAR, specular);
glMaterialfv(GL_FRONT, GL_SHININESS, shiness);
glEnable(GL_LIGHTING);
glEnable(GL_LIGHT1);
glTranslatef(2.0f, 1.0f, 0.0f);
glRotatef(-90.0f, 1.0f, 0.0f, 0.0f);
gluCylinder(pObj, 0.03f, 0.03f, 1.1f, 26, 13);
glDisable(GL_LIGHTING);
glDisable(GL_LIGHT0);
glPopMatrix();
glPopMatrix();
//big push matrix for eyes, and nose
glPushMatrix();
//eyes color = black light. set defuse all 0, ambient = black. turns the eyes black
/*ambient[0] = 0.0; ambient[1] = 0.0; ambient[2] = 0.0;
diffuse[0] = 0.0; diffuse[1] = 0.0; diffuse[2] = 0.0;
specular[0] = 0.7; specular[1] = 0.6; specular[2] = 0.5;
glMaterialfv(GL_FRONT, GL_AMBIENT, ambient);
glMaterialfv(GL_FRONT, GL_DIFFUSE, diffuse);
glMaterialfv(GL_FRONT, GL_SPECULAR, specular);
glMaterialfv(GL_FRONT, GL_SHININESS, shiness);*/
glColor3f(0.0, 0.0, 0.0);
//left eye
glPushMatrix();
glTranslatef(-0.17, 1.7, 0.25 );
glutSolidSphere(0.05, 10.0, 10.0);
glPopMatrix();
//right eye
glPushMatrix();
glTranslatef(0.17, 1.7, 0.25 );
glutSolidSphere(0.05, 10.0, 10.0);
glPopMatrix();
//drawing nose
glPushMatrix();
glTranslatef(0.0, 1.6, 0.25 );
glutSolidCone(0.08f,0.5f,10,2);
glPopMatrix();
glPopMatrix(); // end big push matrix for eyes and nose
glPopMatrix();
} // end of drawsnowman()
void display (void) {
glClearColor(0.25f, 0.25f, 0.50f, 1.0f ); // blueish color
glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
// glLoadIdentity();
// MODEL VIEW is set up in IniitGL
//so save it
glPushMatrix();
//switch to projection matrix
//swithc to ortho.
//draw texture
glMatrixMode(GL_PROJECTION);
glLoadIdentity();
glOrtho(0.0, 1.0, 0.0, 1.0, 0.0, -1.0);
glDisable(GL_DEPTH_TEST);
glDisable(GL_LIGHTING);
glDepthMask(GL_FALSE);
glMatrixMode(GL_MODELVIEW);
glLoadIdentity();
glEnable(GL_TEXTURE_2D);
glBindTexture(GL_TEXTURE_2D, texture);
// Draw a textured quad
glBegin(GL_QUADS);
glTexCoord2f(0, 0); glVertex3f(0, 0, 0);
glTexCoord2f(0, 1); glVertex3f(0, 1, 0);
glTexCoord2f(1, 1); glVertex3f(1, 1, 0);
glTexCoord2f(1, 0); glVertex3f(1, 0, 0);
glEnd();
glDepthMask(GL_TRUE);
glEnable(GL_DEPTH_TEST);
glPopMatrix();// pop the 3d model view
glMatrixMode(GL_PROJECTION);
glMatrixMode(GL_MODELVIEW);
// You can ignore this. just a different of way drawing texture and still does not work
/* glMatrixMode(GL_PROJECTION);
glPushMatrix();
glLoadIdentity();
glOrtho(0.0, 1.0, 0.0, 1.0, 0.0, -1.0);
glDisable(GL_DEPTH_TEST);
glDisable(GL_LIGHTING);
glDepthMask(GL_FALSE);
glMatrixMode(GL_MODELVIEW);
glPushMatrix();
glDepthMask( false );
glLoadIdentity();
glEnable(GL_TEXTURE_2D);
glBindTexture(GL_TEXTURE_2D, texture);
// Draw a textured quad
glBegin(GL_QUADS);
glTexCoord2f(0, 0); glVertex3f(0, 0, 0);
glTexCoord2f(0, 1); glVertex3f(0, 1, 0);
glTexCoord2f(1, 1); glVertex3f(1, 1, 0);
glTexCoord2f(1, 0); glVertex3f(1, 0, 0);
glEnd();
glDepthMask(GL_TRUE);
glEnable(GL_DEPTH_TEST);
glEnable(GL_LIGHTING);
/*glMatrixMode(GL_PROJECTION);
glLoadIdentity();
gluPerspective (60, 800 / 600, 1.0, 100.0);;
glMatrixMode(GL_MODELVIEW);
glLoadIdentity();
gluLookAt( 0.0, 0.0, 0.0, // Where would the camera be?
0.0, 0.0,-1.0, // Where would it be looking?
0.0, 1.0, 0.0); // What would be the "up" vector?fa*/
/* glDisable(GL_TEXTURE_2D);
glPopMatrix();
glMatrixMode(GL_PROJECTION);
glPopMatrix();
//gluPerspective (45, SCREEN_WIDTH / SCREEN_HEIGHT, 1.0, 100.0);
glMatrixMode(GL_MODELVIEW);
glLoadIdentity();*/
drawSnowMan(); // draw snow man
glutSwapBuffers();
angle ++;
}
void reshape (int w, int h) {
glViewport (0, 0, (GLsizei)w, (GLsizei)h);
glMatrixMode (GL_PROJECTION);
glLoadIdentity ();
gluPerspective (45, (GLfloat)w / (GLfloat)h, 1.0, 100.0);
glMatrixMode (GL_MODELVIEW);
}
bool initGL (void) {
glViewport(0, 0, SCREEN_WIDTH, SCREEN_HEIGHT);
// Switch to the "camera" mode
glMatrixMode(GL_PROJECTION); // Camera
glLoadIdentity();
// Change the camera to a 3D view
glFrustum( -1 * (float) SCREEN_WIDTH / SCREEN_HEIGHT,
(float) SCREEN_WIDTH / SCREEN_HEIGHT,
-1.0,
1.0,
1.5,
1000.0);
glClearColor(0.25f, 0.25f, 0.50f, 1.0f );
glHint(GL_LINE_SMOOTH_HINT, GL_NICEST); // NEW (5)
glEnable(GL_LINE_SMOOTH); // NEW (6)
glHint(GL_POLYGON_SMOOTH_HINT, GL_NICEST); // NEW (7)
glEnable(GL_POLYGON_SMOOTH); // NEW (8)
// this is a specular light
GLfloat mat_specular[] = { 1.0 , 1.0 , 1.0 , 1.0 }; // Color of a "shiny material
GLfloat mat_shininess[] = { 50.0 }; // How shiny is it?
// GLfloat mat_ambient_and_diffuse[] = { 0.0, 1.0, 0.0, 1.0 };
GLfloat light_position[] = { 1.0, 1.0, 1.0, 0.0 }; // Infinitely far away. Direction light
GLfloat light_position1[] = {2.0,1.5,0.0,1.0}; // saber light
// How to calculate the surface normal for pixels
glShadeModel(GL_SMOOTH); // Try this as well GL_FLAT
// Setup up some material reflective properties
// glMaterialfv(GL_FRONT, GL_SPECULAR, mat_specular);
// glMaterialfv(GL_FRONT, GL_SHININESS, mat_shininess);
//glMaterialfv(GL_FRONT, GL_AMBIENT, mat_ambient_and_diffuse);
//glMaterialfv(GL_FRONT, GL_DIFFUSE, mat_ambient_and_diffuse);
// Finally actually make the light
glLightfv(GL_LIGHT0, GL_POSITION, light_position);
glLightfv(GL_LIGHT1, GL_POSITION, light_position1);
//Check for error
GLenum error = glGetError(); // NEW (9)
if( error != GL_NO_ERROR ) {
printf( "Error initializing OpenGL! %s\n", gluErrorString( error ) );
return false;
}
return true;
}
void idle(void) {
glutPostRedisplay();
}
Reoccuring newbie misconception: OpenGL "initialization".
OpenGL is not initialized! All the code you have in initGL and reshape belongs into display.
In the case of calls glLight… those must be placed in display, after setting the modelview matrix into the space you want the lights to be in. Also OpenGL is not a library; yes originally the 'L' in OpenGL did mean library, but I backronymed it to Layer, because that's what it is on most modern graphics systems: A layer between a end user program and the GPU and its drivers.
I think once you moved the code from initGL and reshape to display, the solution should become clear: You can change, reset and modify the projection and modelview matrix whenever you like. To have the window width and height available in display either store them in global variables in reshape, or, the preferred solution, use glutGet(GLUT_WINDOW_WIDTH) and glutGet(GLUT_WINDOW_HEIGHT) to query the window dimensions in the display function.
You want to draw things in a orthographic projection? Then setup projection and modelview appropriately. Switching to a perspective? Just do it.
I think I kinda figure out why my background texture keep disappearing. I had Cullface and depth something turned on. I turned it off befor popping the last matrix and it works.
However, there is one problem. The texture image is snowy background, but it turns into all red. So first I thought it was due to the reflection of the lighting from the snowgirl. I turned off all the light and still red. Can't figure out why. Could it be, the texture color blending in with the original color of the snowman?
Related
I am reviving some openGL/glutcode from over 10 years ago. It looks like freeglut has taken over from glut, and something is not quite the same. This code used to color the sphere:
void DrawRider() {
glDisable(GL_TEXTURE_2D);
glMatrixMode(GL_MODELVIEW);
glColor4f(1.0, 0.6, 0.4, 0.5);
glutSolidSphere(0.5, 12, 6);
}
Now the sphere is black, though it shows some signs of lighting.
Here is the set up code:
void init (void) {
glEnable(GL_DEPTH_TEST);
glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA);
glEnableClientState(GL_COLOR_ARRAY);
glEnableClientState(GL_VERTEX_ARRAY);
glShadeModel(GL_SMOOTH);
glFrontFace(GL_CCW);
glEnable(GL_TEXTURE_2D);
glPixelStorei(GL_UNPACK_ALIGNMENT,1);
if (transparent) glEnable(GL_BLEND);
glColor3f(1.0,1.0,1.0);
gCameraReset();
glPolygonOffset (1.0, 1.0);
SetLighting(4);
glEnable(GL_LIGHTING);
}
void SetLighting(unsigned int mode)
{
GLfloat mat_specular[] = {1.0, 1.0, 1.0, 1.0};
GLfloat mat_shininess[] = {90.0};
GLfloat position[4] = {7.0,-7.0,12.0,0.0};
GLfloat ambient[4] = {0.2,0.2,0.2,1.0};
GLfloat diffuse[4] = {1.0,1.0,1.0,1.0};
GLfloat specular[4] = {1.0,1.0,1.0,1.0};
glMaterialfv (GL_FRONT_AND_BACK, GL_SPECULAR, mat_specular);
glMaterialfv (GL_FRONT_AND_BACK, GL_SHININESS, mat_shininess);
glEnable(GL_COLOR_MATERIAL);
glColorMaterial(GL_FRONT_AND_BACK,GL_AMBIENT_AND_DIFFUSE);
switch (mode) {
// OTHER CASES ELIDED FOR POSTING TO StackOverflow
case 4:
glLightModeli(GL_LIGHT_MODEL_TWO_SIDE,GL_TRUE);
glLightModeli(GL_LIGHT_MODEL_LOCAL_VIEWER,GL_TRUE);
break;
}
glLightfv(GL_LIGHT0,GL_POSITION,position);
glLightfv(GL_LIGHT0,GL_AMBIENT,ambient);
glLightfv(GL_LIGHT0,GL_DIFFUSE,diffuse);
glLightfv(GL_LIGHT0,GL_SPECULAR,specular);
glEnable(GL_LIGHT0);
}
And here is the display code that calls DrawRider:
void maindisplay(void)
{
if (textured) glEnable(GL_TEXTURE_2D);
else glDisable(GL_TEXTURE_2D);
if (transparent) glDepthMask(0);
else glDepthMask(1);
if (!riding) {
// track ball rotation
glRotatef (gTrackBallRotation[0], gTrackBallRotation[1], gTrackBallRotation[2], gTrackBallRotation[3]);
glRotatef (gWorldRotation[0], gWorldRotation[1], gWorldRotation[2], gWorldRotation[3]);
}
glClearColor (0.2f, 0.2f, 0.2f, 1.0f); // defines the "background" color
glClear (GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); // clear the surface
if (!riding) DrawRider();
glutSwapBuffers();
}
I am trying to draw a sphere and a cube at the same time on my screen. But the colors of my cube(which gets drawn first) dissapear. I don't understand why.
the sphere on the right is fine. But my cube on the left isn't.
I added texture to both:
I can perfectly draw both of them seperately, but when I try to draw both of them on one widget something goes wrong.
I tought the popping and pushing would solve this issue, but it doesn't.
code:
void MyGLWidget::drawCube()
{
glClear(GL_DEPTH_BUFFER_BIT | GL_COLOR_BUFFER_BIT);
glLoadIdentity();
gluLookAt(position,0.5,-0.1,-0.5,-0.5,0,0,0,1);
glTranslatef( 0.5, 0, 0.0);
glRotatef(getCubeAngle(), 1.0f, 0.0f, 0.0f);
glTranslatef(0, 0, 0);
glDisable(GL_TEXTURE_GEN_S);
glDisable(GL_TEXTURE_GEN_T);
glPushMatrix();
glBindTexture(GL_TEXTURE_2D, texture[0]);
glBegin(GL_QUADS);
//back
glTexCoord2f(0.0, 1.0); glVertex3f(-0.1, 0.1,-0.1 );
glTexCoord2f(1.0, 1.0); glVertex3f(0.1, 0.1,-0.1);
glTexCoord2f(1.0, 0.0); glVertex3f(0.1,-0.1,-0.1);
glTexCoord2f(0.0, 0.0); glVertex3f(-0.1,-0.1,-0.1);
/*rest of cube gets drawn*/
glEnd();
glFlush();
glPopMatrix();
}
void MyGLWidget::drawSun()
{
glPushMatrix();
glLoadIdentity();
glBindTexture(GL_TEXTURE_2D, texturePlanet[0]);
glPushMatrix();
glScalef(1,1,1);
glLoadIdentity();
GLUquadricObj *quadric=gluNewQuadric();
gluQuadricTexture(quadric, GLU_TRUE);
gluQuadricNormals(quadric, GLU_SMOOTH);
glEnable(GL_TEXTURE_2D); //
glBindTexture(GL_TEXTURE_2D,texturePlanet[0]);//
gluSphere(quadric, 0.25, 360,360);
glDisable(GL_TEXTURE_2D);//
gluDeleteQuadric(quadric);
glPopMatrix();
}
void MyGLWidget::paintGL()
{
drawCube();
drawSun();
}
It is because In your cube drawing, you didn't enable texturing.
glEnable(GL_TEXTURE_2D); //ADD THIS TO ENABLE TEXTURING
glPushMatrix();
glBindTexture(GL_TEXTURE_2D, texture[0]);
glBegin(GL_QUADS);
//back
glTexCoord2f(0.0, 1.0); glVertex3f(-0.1, 0.1,-0.1 );
glTexCoord2f(1.0, 1.0); glVertex3f(0.1, 0.1,-0.1);
glTexCoord2f(1.0, 0.0); glVertex3f(0.1,-0.1,-0.1);
glTexCoord2f(0.0, 0.0); glVertex3f(-0.1,-0.1,-0.1);
/*rest of cube gets drawn*/
glEnd();
glFlush();
glPopMatrix();
glDisable(GL_TEXTURE_2D); // ADD THIS TO DISABLE TEXTURING
I am trying to draw a sphere and a rotating cube around it. I am able to draw both of them perfectly seperately. Nevertheless once I draw both together I get strange results.
my sphere gets disformed.
when I change the angle of my cubeon purpose (by pressing on a button) it just dissapears from my screen.
when I only draw the cube and theng change the angle everything works fine.
Why please?
image: http://imgur.com/dIngayh (the cube looks ok, but the sphere is too stretched)
My code:
void MyGLWidget::paintGL()
{
glScalef(1,1,1);
setLight();
drawSun();
drawCube();
}
void MyGLWidget::initializeGL()
{
glClearColor(0.0, 0.0, 0.0, 0.0);
glShadeModel(GL_SMOOTH);
glEnable(GL_TEXTURE_2D);
}
void MyGLWidget::drawSun()
{
glPushMatrix();
glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
glScalef(1,1,1);
glLoadIdentity();
GLUquadricObj *quadric=gluNewQuadric();
gluQuadricNormals(quadric, GLU_SMOOTH);
glColor3f(1,1,0);
gluSphere(quadric, 0.25, 360,360);
gluDeleteQuadric(quadric);
glPopMatrix();
}
void MyGLWidget::drawCube()
{
glTranslatef(0, 0, 0);
glRotatef(getCubeAngle(), 1.0f, 0.0f, 0.0f);
glRotatef(0, 0.0f, 1.0f, 0.0f);
glRotatef(0, 0.0f, 0.0f, 1.0f);
glTranslatef( 0.5, 0, 0);
glBegin(GL_QUADS);
//back side of cube
glColor3f(255,0,0);
glVertex3f(-0.1, 0.1,-0.1 );//upper left corner
glVertex3f(0.1, 0.1,-0.1); //uper right
glVertex3f(0.1,-0.1,-0.1 ); // down left
glVertex3f(-0.1,-0.1,-0.1); // down right
/*draws other parts of the cube in the same way*/
glEnd();
glFlush();
}
/**/
void MyGLWidget::setLight()
{
// Prepare light parameters.
float SHINE_ALL_DIRECTIONS = 1;
float lightPos[4] = {-30, 0, 0, SHINE_ALL_DIRECTIONS};
float lightColorAmbient[4] = {50, 50, 0.1, 1};
float lightColorSpecular[4] = {150, 150, 0.5, 1};
// Set light parameters.
glLightfv(GL_LIGHT1, GL_POSITION, lightPos);
glLightfv(GL_LIGHT1, GL_AMBIENT, lightColorAmbient);
glLightfv(GL_LIGHT1, GL_SPECULAR, lightColorSpecular);
// Enable lighting in GL.
glEnable(GL_LIGHT1);
glEnable(GL_LIGHTING);
// Set material properties.
float rgba[3] = {0.3, 0.5, 1};
glMaterialfv(GL_FRONT, GL_AMBIENT, rgba);
glMaterialfv(GL_FRONT, GL_SPECULAR, rgba);
glMaterialf(GL_FRONT, GL_SHININESS, 0.5f);
}
try to add this one:
void MyGLWidget::resizeGL(int width, int height);
{
glViewport(0, 0, width, height);
glMatrixMode(GL_PROJECTION);
glLoadIdentity();
glScalef(height *1./width, 1.0, 1.0);
glMatrixMode(GL_MODELVIEW);
}
and more read here (rus)
I'm trying to recognize a drawn object on a mousPressEvent in OpenGL in Qt with picking.
I did some research but wasn't able to find the problem.
Clearly it recognizes something (because the return value of glRenderMode(GL_RENDER) is often an integer > 0), but not necessarily when I click on an object.
I think gluPerspective is the problem right here, but i just don't know how to resolve it.
mousePressEvent:
void WorldView::mousePressEvent(QMouseEvent *e)
{
GLuint buff[256];
GLint hits;
GLint view[4];
//Buffer to store selection data
glSelectBuffer(256, buff);
//Viewport information
glGetIntegerv(GL_VIEWPORT, view);
//Switch to select mode
glRenderMode(GL_SELECT);
//Clear the name stack!
glInitNames();
//Restric viewing volume
glMatrixMode(GL_PROJECTION);
glPushMatrix();
glLoadIdentity();
//Restrict draw area
gluPickMatrix(e->x(), e->y(), 1.0, 1.0, view);
gluPerspective(40.0f, (GLfloat)view[2]/(GLfloat)view[3], 1.0, 100.0);
//Draw the objects onto the screen
glMatrixMode(GL_MODELVIEW);
//Draw only the names in the stack
paintGL();
//Back into projection mode to push the matrix
glMatrixMode(GL_PROJECTION);
glPopMatrix();
hits = glRenderMode(GL_RENDER);//number of recognized objects
printf("\n%d\n",hits);
//Back to modelview mode
glMatrixMode(GL_MODELVIEW);
}
Draw function:
void WorldView::paintGL ()
{
this->dayOfYear = (this->dayOfYear+1);
this->hourOfDay = (this->hourOfDay+1) % 24;
glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
glLoadIdentity();
// store current matrix
glMatrixMode( GL_MODELVIEW );
glPushMatrix( );
gluLookAt(camPosx ,camPosy ,camPosz,
camViewx,camViewy,camViewz,
camUpx, camUpy, camUpz );
//Draw Axes
glDisable( GL_LIGHTING );
glBegin(GL_LINES);
glColor3f(1.0, 0.0, 0.0);
glVertex3f(0.0, 0.0, 0.0);
glVertex3f(10.0, 0.0, 0.0);
glColor3f(0.0, 1.0, 0.0);
glVertex3f(0.0, 0.0, 0.0);
glVertex3f(0.0, 10.0, 0.0);
glColor3f(0.0, 0.0, 1.0);
glVertex3f(0.0, 0.0, 0.0);
glVertex3f(0.0, 0.0, 10.0);
glEnd();
//Draw objects we want to pick
glPushName(0);
glBegin(GL_TRIANGLES);
glVertex3d(1,1,1);
glVertex3d(2,3,2);
glVertex3d(5,2,2);
glEnd();
glPopName();
glPushName(1);
glBegin(GL_TRIANGLES);
glVertex3d(7,-5,1);
glVertex3d(10,3,2);
glVertex3d(10,2,2);
glEnd();
glPopName();
glPushName(2);
glBegin(GL_TRIANGLES);
glVertex3d(1,-5,7);
glVertex3d(2,3,9);
glVertex3d(5,2,9);
glEnd();
glPopName();
}
EDIT1: Maybe completing the code could help?
Initializer:
void WorldView::initializeGL ()
{
this->dayOfYear = 0;
this->hourOfDay = 0;
// Initialize QGLWidget (parent)
QGLWidget::initializeGL();
glShadeModel(GL_SMOOTH);
// Black canvas
glClearColor(0.0f,0.0f,0.0f,0.0f);
// Place light
glEnable( GL_LIGHTING );
glEnable( GL_LIGHT0 );
glEnable(GL_DEPTH_TEST);
GLfloat light0_position [] = {0.1f, 0.1f, 0.1f, 0.1f};
GLfloat light_diffuse []={ 1.0, 1.0, 1.0, 1.0 };
glLightfv ( GL_LIGHT0, GL_POSITION, light0_position );
glLightfv ( GL_LIGHT0, GL_DIFFUSE, light_diffuse );
}
resizer:
void WorldView::resizeGL ( int width, int height )
{
if ((width<=0) || (height<=0))
return;
//set viewport
glViewport(0,0,width,height);
glMatrixMode(GL_PROJECTION);
glLoadIdentity();
//set persepective
//change the next line order to have a different perspective
GLdouble aspect_ratio=(GLdouble)width/(GLdouble)height;
gluPerspective(40.0f, aspect_ratio, 1.0, 100.0);
glMatrixMode(GL_MODELVIEW);
glLoadIdentity();
}
Use bullet raycast and not gl_Select which is way too slow and unwieldy. This will also make you get away from calling paintGL manually and other glCalls...in qt mousepressevent. Dont do this!
I'm having trouble being able to see objects I've created when I have enabled lighting in OpenGL. I have an object that is imported from 3D Max that the lighting works correctly on but the rest of my scene does not. I know that I need to specify normals but this hasn't seemed to have helped. Although if I create a simple polygon in my display() function that works correctly but other polygons that have been created in methods of a class and called in the display() function are not showing up
Here is my lighting code
glewInit();
glClearColor(0.0,0.0,0.0,0.0);
glClear(GL_COLOR_BUFFER_BIT)
glShadeModel(GL_SMOOTH);
//light position and colour
GLfloat light_position[] = { 0.0, 0.0, 20.0,0.0 };
GLfloat white_light[] = {0.8,0.8,0.8,0.0};
GLfloat diff_light[] = {1.0,1.0,1.0,0.0};
GLfloat spec_light[] = {1.0,1.0,1.0,0.0};
glLightfv(GL_LIGHT0, GL_AMBIENT, white_light);
glLightfv(GL_LIGHT0, GL_DIFFUSE, diff_light);
glLightfv(GL_LIGHT0, GL_SPECULAR, spec_light);
glLightfv(GL_LIGHT0, GL_POSITION, light_position);
//ambient light
GLfloat ambient[] = {0.3,0.3,0.3};
glMaterialfv(GL_FRONT, GL_AMBIENT, ambient);
//diffuse material component
GLfloat diff[] = {0.6,0.6,0.6};
glMaterialfv(GL_FRONT, GL_DIFFUSE, diff);
//specular material component
GLfloat WhiteSpec[] = {1,1,1};
glMaterialfv(GL_FRONT, GL_SPECULAR, WhiteSpec);
GLfloat shininess = 50;
glMaterialf(GL_FRONT, GL_SHININESS, shininess);
//ENABLE LIGHTING AND DEPTH TEST
glEnable(GL_LIGHTING);
glEnable(GL_LIGHT0);
glEnable(GL_DEPTH_TEST);
This is my class method that is creating my sea
glColor3f(0,0,1);
glPushMatrix();
//enable texturing
glEnable(GL_TEXTURE_2D);
glEnable(GL_BLEND);
glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA);
glBindTexture(GL_TEXTURE_2D, seaTex);
glTexEnvf(GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_REPLACE);
for(int i = 0, k = 0; i < (getWidth()/10); i++){
for(int j = 0; j < (getLength()/10); j++){
if(i >= Sea::waveLoc1 && i <= Sea::waveLoc1+Sea::sinArrayLength){
int nextK = k+1;
if(nextK == Sea::sinArrayLength){
nextK = 0;
}
if(i == Sea::waveLoc1+Sea::sinArrayLength){
//front of wave
glBegin(GL_POLYGON);
glNormal3f(0.0f, 1.0f, 0.0f);
glTexCoord2f(0.0, 1.0);glVertex3f(Sea::seaGrid[i][j].x, Sea::sinVals[nextK], Sea::seaGrid[i][j].z);
glTexCoord2f(0.0, 0.0);glVertex3f(Sea::seaGrid[i][j+1].x, Sea::sinVals[nextK], Sea::seaGrid[i][j+1].z);
glTexCoord2f(1.0, 0.0);glVertex3f(Sea::seaGrid[i+1][j+1].x, Sea::seaGrid[i+1][j+1].y , Sea::seaGrid[i+1][j+1].z);
glTexCoord2f(1.0, 1.0);glVertex3f(Sea::seaGrid[i+1][j].x, Sea::seaGrid[i+1][j].y, Sea::seaGrid[i+1][j].z);
glEnd();
}else{
//rest of wave
glBegin(GL_POLYGON);
glNormal3f(0.0f, 1.0f, 0.0f);
glTexCoord2f(0.0, 1.0);glVertex3f(Sea::seaGrid[i][j].x, Sea::sinVals[k], Sea::seaGrid[i][j].z);
glTexCoord2f(0.0, 0.0);glVertex3f(Sea::seaGrid[i][j+1].x, Sea::sinVals[k], Sea::seaGrid[i][j+1].z);
glTexCoord2f(1.0, 0.0);glVertex3f(Sea::seaGrid[i+1][j+1].x, Sea::sinVals[nextK], Sea::seaGrid[i+1][j+1].z);
glTexCoord2f(1.0, 1.0);glVertex3f(Sea::seaGrid[i+1][j].x, Sea::sinVals[nextK], Sea::seaGrid[i+1][j].z);
glEnd();
}
}else{
//draw flat sea
glBegin(GL_POLYGON);
glNormal3f(0.0f, 1.0f, 0.0f);
glTexCoord2f(0.0, 1.0);glVertex3f(Sea::seaGrid[i+1][j].x, Sea::seaGrid[i+1][j].y, Sea::seaGrid[i+1][j].z);
glTexCoord2f(0.0, 0.0);glVertex3f(Sea::seaGrid[i+1][j+1].x, Sea::seaGrid[i+1][j+1].y, Sea::seaGrid[i+1][j+1].z);
glTexCoord2f(1.0, 0.0);glVertex3f(Sea::seaGrid[i][j+1].x, Sea::seaGrid[i][j+1].y, Sea::seaGrid[i][j+1].z);
glTexCoord2f(1.0, 1.0);glVertex3f(Sea::seaGrid[i][j].x, Sea::seaGrid[i][j].y, Sea::seaGrid[i][j].z);
glEnd();
}
}
//increment k if i is in the area of the wave
if(k < Sea::sinArrayLength-1 && (i >= Sea::waveLoc1 && i <= Sea::waveLoc1+Sea::sinArrayLength)){
k++;
}else if(k == Sea::sinArrayLength){
k = 0;
}
}
if(Sea::waveLoc1 < 100 && Sea::waveInc == Sea::waveSpeedLimiter){
Sea::waveLoc1 +=1;
}else if(Sea::waveLoc1 >= 100){
Sea::waveLoc1 = 0;
}
//limits speed of wave
if(Sea::waveInc < Sea::waveSpeedLimiter){
Sea::waveInc++;
}else{
Sea::waveInc = 0;
}
//disable texturing
glDisable(GL_BLEND);
glDisable(GL_TEXTURE_2D);
glPopMatrix();
This is then called in my display() function as below
glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
glMatrixMode(GL_PROJECTION);
glLoadIdentity();
gluPerspective(45.0f,(GLfloat)screenWidth/(GLfloat)screenHeight,0.1f,1000.0f);
glMatrixMode(GL_MODELVIEW);
glLoadIdentity();
camera.updateCameraPosition(mouse_x,mouse_y,screenWidth,screenHeight);
sea.buildSeaPlane();
scene.buildEdges();
glPushMatrix();
glColor3f(0,1,0);
glTranslatef(0, 20, 200);
model.speedDisplayFaceNormals();
glPopMatrix();
glPushMatrix();
plane.updatePlanePosition();
glBegin(GL_POLYGON);
glNormal3f(0.0f, 1.0f, 0.0f);
glVertex3f(0, 25, 10);
glVertex3f(2, 25, 10);
glVertex3f(2, 25, 20);
glVertex3f(0, 25, 20);
glEnd();
glPopMatrix();
glFlush();
Any idea why I can't see any of this?
UPDATE:
I can see my sea if I disable texturing. How can I fix it so I can use textures and lighting?
UPDATE 2:
Have changed texturing to GL_MODULATE but I also had to remove the blending to make it work. Do I need blending enabled?
glTexEnvf(GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_REPLACE);
says to replace the lighting computation with the result of texturing. If you want lighting to affect texturing, us GL_MODULATE instead of GL_REPLACE.
Edit to add:
You only need blending if you want your geometry to be translucent (that's what blending is typically for). In your case, there are a number of issues in the code:
your light colors are fully transparent (all have 0. as the 4th component). So your light is making everything invisible. change it to 1.
your materials don't have a 4th component. That's even worse, as glMaterialfv expects 4 floats. That could even crash your app or reformat your disk. Add a forth component, preferably to 1. to make it fully opaque.
Try adding an ambient light for the whole scene. Something like:
GLfloat lightColor[] = {1.0f, 1.0f, 1.0f, 1.0f};
glLightModelfv(GL_LIGHT_MODEL_AMBIENT, lightColor);
In your glMaterialfv calls, the color parameter should have 4 values, not 3. Normally the 4th value is an alpha of 1.0. I'm not sure if it's OK to pass 0.0 as the 4th value for glLightfv either.