Description: An error occurred with the following error message: "Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebserviceTaskException: The Web Service threw an error during method execution. The error is: Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'. The request failed with the error message: -- IIS 7.5 Detailed Error - 500.24 - Internal Server Error Server Error in Application "DEFAULT WEB SITE" Internet Information Services 7.5 Error Summary HTTP Error 500.24 - Internal Server Error An ASP.NET setting has been detected that does not apply in Integrated managed pipeline mode. Detailed Error Information
Change your application pool properties to:
.NET Framework Version
-- .NET Framework *version*
Pipeline Mode
-- Classic
change your web.config like this:
<system.webServer>
<validation validateIntegratedModeConfiguration="false" />
</system.webServer>
Related
For sitecore publishing service I have followed the steps from https://jonathanrobbins.co.uk/2016/09/02/setting-up-sitecore-publishing-service and Sitecore. But I am getting below error:
HTTP Error 500.19 – Internal Server Error
The requested page cannot be accessed because the related configuration data for the page is invalid.
Module IIS Web Core
Notification Unknown
Handler Not yet determined
Error Code 0x8007000d
Config Error
Config File \?\C:\sitecorepublishing\web.config
What am I missing?
The AspNetCoreModule has to be installed on the server and is part of the ASP.NET Core Server Hosting Bundle.
I am trying to set up IIS 8 with Django 1.8.3 using Fastcgi and Python 3.4. I followed this tutorial with the following Environment Variables:
DJANGO_SETTINGS_MODULE -> value: FirstSite.settings
PYTHONPATH -> value: C:\inetpub\wwwroot\Django\FirstSite
WSGI_HANDLER -> value: django.core.wsgi.get_wsgi_application()
I changed the WSGI Handler value from django.core.handlers.wsgi.wsgihandler() to django.core.wsgi.get_wsgi_application() because the tutorial talks about a previous Django version.
I followed everything in the tutorial, and as I try to open the website on my IE browser in Windows Server 2012 R2 I get the following error:
Keep in mind 8003 is the port I configured as the tutorial showed.
HTTP Error 500.0 - Internal Server Error scriptProcessor
could not be found in application configuration
Most likely causes: •IIS received the request; however, an internal
error occurred during the processing of the request. The root cause of
this error depends on which module handles the request and what was
happening in the worker process when this error occurred.
•IIS was not able to access the web.config file for the Web site or
application. This can occur if the NTFS permissions are set
incorrectly.
•IIS was not able to process configuration for the Web site or
application.
•The authenticated user does not have permission to use this DLL.
•The request is mapped to a managed handler but the .NET Extensibility
Feature is not installed.
Things you can try:
•Ensure that the NTFS permissions for the web.config file are correct
and allow access to the Web server's machine account.
•Check the event logs to see if any additional information was logged.
•Verify the permissions for the DLL.
•Install the .NET Extensibility feature if the request is mapped to a
managed handler.
•Create a tracing rule to track failed requests for this HTTP status
code. For more information about creating a tracing rule for failed
requests, click here.
Detailed Error Information:
Module FastCgiModule
Notification ExecuteRequestHandler
Handler Django Handler
Error Code 0x80070585
Requested URL http://127.0.0.1:8003/
Physical Path C:\inetpub\wwwroot\Django\FirstSite
Logon Method Anonymous
Logon User Anonymous
More Information: This error means that there was a problem while
processing the request. The request was received by the Web server,
but during processing a fatal error occurred, causing the 500 error.
View more information »
Microsoft Knowledge Base Articles: •294807
Is there any way to fix this error? Are there any extra steps for Python 3.4?
Found my error. The Handler Mapping Executable argument was pointing to fastcgi.py instead of wfastcgi.py
I have windows server 2012 and sharepoint 2013 installed. Now i wanted to configured my wcf service on the server.
After Creating the new app pool & site its shows me the error as below
HTTP Error 500.19 - Internal Server Error
The configuration section 'system.serviceModel' cannot be read because it is missing a section declaration
Also i have found the solution on the link below
HTTP Error 404.17 - Not Found
where suggested to run the command "servicemodelreg -i". I have did the same and my service started working. But the sharepoint services are stopped working showing the below error
Exception message: Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.
Please help me out to the resolve this problem.....
Thanks is advance
I use Mule Server 3.3.0 CE, I generate this code:
<mule xmlns="http://www.mulesoft.org/schema/mule/core" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:spring="http://www.springframework.org/schema/beans" xmlns:http="http://www.mulesoft.org/schema/mule/http"
xmlns:pattern="http://www.mulesoft.org/schema/mule/pattern"
xmlns:mule-ss="http://www.mulesoft.org/schema/mule/spring-security"
xmlns:ss="http://www.springframework.org/schema/security"
xsi:schemaLocation="
http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-current.xsd
http://www.mulesoft.org/schema/mule/core http://www.mulesoft.org/schema/mule/core/3.3/mule.xsd
http://www.mulesoft.org/schema/mule/http http://www.mulesoft.org/schema/mule/http/3.3/mule-http.xsd
http://www.mulesoft.org/schema/mule/pattern http://www.mulesoft.org/schema/mule/pattern/3.3/mule-pattern.xsd
http://www.mulesoft.org/schema/mule/spring-security
http://www.mulesoft.org/schema/mule/spring-security/3.3/mule-spring-security.xsd
http://www.springframework.org/schema/security
http://www.springframework.org/schema/security/spring-security-3.1.xsd">
<mule-ss:security-manager>
<mule-ss:delegate-security-provider
name="memory-dao" delegate-ref="authenticationManager" />
</mule-ss:security-manager>
<spring:beans>
<ss:authentication-manager alias="authenticationManager">
<ss:authentication-provider>
<ss:user-service id="userService">
<ss:user name="sepideh" password="16978413" authorities="ROLE_ADMIN" />
</ss:user-service>
</ss:authentication-provider>
</ss:authentication-manager>
</spring:beans>
<pattern:web-service-proxy name="myService"
wsdlLocation="http://ws.acme.com:6090/wsdl/weather-forecast">
<http:inbound-endpoint address="http://localhost:8090/service">
<mule-ss:http-security-filter realm="mule-realm" />
</http:inbound-endpoint>
<http:outbound-endpoint address="http://ws.acme.com:6090/weather-forecast" />
</pattern:web-service-proxy>
I run this project and I have below exception:
ERROR 2012-11-27 14:31:25,456 [[web_service].connector.http.mule.default.receiver.02] org.mule.exception.DefaultMessagingExceptionStrategy:
********************************************************************************
Message : Registered authentication is set to org.mule.module.spring.security.filters.http.HttpBasicAuthenticationFilter but there was no security context on the session. Authentication denied on endpoint http://localhost:8090/service. Message payload is of type: String
Code : MULE_ERROR-54999
--------------------------------------------------------------------------------
Exception stack is:
1. Registered authentication is set to org.mule.module.spring.security.filters.http.HttpBasicAuthenticationFilter but there was no security context on the session. Authentication denied on endpoint http://localhost:8090/service. Message payload is of type: String (org.mule.api.security.UnauthorisedException)
org.mule.transport.http.filters.HttpBasicAuthenticationFilter:160 (http://www.mulesoft.org/docs/site/current3/apidocs/org/mule/api/security/UnauthorisedException.html)
--------------------------------------------------------------------------------
Root Exception stack trace:
org.mule.api.security.UnauthorisedException: Registered authentication is set to org.mule.module.spring.security.filters.http.HttpBasicAuthenticationFilter but there was no security context on the session. Authentication denied on endpoint http://localhost:8090/sevice. Message payload is of type: String
at org.mule.transport.http.filters.HttpBasicAuthenticationFilter.authenticateInbound(HttpBasicAuthenticationFilter.java:160)
at org.mule.security.AbstractEndpointSecurityFilter.authenticate(AbstractEndpointSecurityFilter.java:58)
at org.mule.security.AbstractAuthenticationFilter.doFilter(AbstractAuthenticationFilter.java:56)
+ 3 more (set debug level logging or '-Dmule.verbose.exceptions=true' for everything)
New wsdl address show me but I can't use this address for create web service.
All of solution link to this page, but I don't know how to change SoapUI to true value.
What should I change in my configuration?
Posting this might helps some one. People who migrating the HTTP connectors from Mule lower version to 3.6+ or 3.7( Because, I faced this error when upgrading). Please follow the link https://docs.mulesoft.com/mule-user-guide/v/3.6/configuring-the-spring-security-manager( We cannt configure mule-realm inside HTTP listener as like in version 3.3). When you try to hit it from SOAP UI, you will find the above error Registered authentication is set to org.mule.module.spring.security.filters.http.HttpBasicAuthenticationFilter but there was no security context on the session. It is not the problem with Mule config file.Need to change SOAPUI settings
2 ways to resolve this error:
Go to SOAPUI->File->Preference->HTTP settings-> enable the option Authenticate Preemptively
or
When setting the basic Auth In SOAPUI
Authorization->Basic -> Pre-emptive auth -> enable Authenticate Pre-emptively.
By default it will be 'Use global preference' which needs to be changed to Authenticate Pre-emptively
Thanks.
Seems related and the error you are getting is a red herring. Are you getting back a success response even if this is being logged?
http://www.mulesoft.org/jira/browse/MULE-5607
Web service - Service is on WAS v7. Client is on JBoss v5. We recently upgraded to JBossWS 3.3.1. Since then the client is unable to communicate with the service on WAS.
Without any changes to code, we get the below exception
2012-01-19 14:42:15,317 ERROR [org.jboss.ws.core.jaxws.SOAPFaultHelperJAXWS]->error#419 (ajp-cwsappdev01%2F205.132.14.29-8109-1)
SOAP request exception java.io.IOException:
Error initializing socket factory SSL context: Can not find truststore url.
Added the following lines of code to the client:
((BindingProvider) impl).getRequestContext().put(StubExt.PROPERTY_KEY_STORE, "/usr/local/jee/.../cacerts"));
((BindingProvider) impl).getRequestContext().put(StubExt.PROPERTY_KEY_STORE_PASSWORD, "*****"));
((BindingProvider) impl).getRequestContext().put(StubExt.PROPERTY_CHUNKED_ENCODING_SIZE, "0");
After making the code change, am getting the below error:
Caused by: org.jboss.ws.WSException: Invalid HTTP server response [404] - Not Found
Any ideas? I added the chunked encoding property, as WAS does not support it properly. Any other incompatibility between JBoss and WebSphere App Server?
Thanks for your help in advance!
==================
I made some code changes and am now getting the below message. I use JBossWS-Native 3.3.1 and JAX-WS 2.1 versions. Does any one know how I can disable chunked encoding in JBoss?
File standard-jaxws-client-config.xml moved into one of JBoss the core JARS - updating it would need me to 'unjar' - edit file - and jar back again.
2012-01-24 10:35:57,930 WARN [org.jboss.ws.core.client.transport.NettyClient]->warn#352 (ajp-cwsappdev01%2F205.132.14.29-8109-4) Can't set chunk size from call properties, illegal value provided!
2012-01-24 10:35:58,001 ERROR [org.jboss.ws.core.CommonClient]->error#419 (ajp-cwsappdev01%2F205.132.14.29-8109-4) Exception caught while (preparing for) performing the invocation:
java.io.IOException: Could not transmit message
at org.jboss.ws.core.client.transport.NettyClient.invokeInternal(NettyClient.java:229)
at org.jboss.ws.core.client.transport.NettyClient.invoke(NettyClient.java:121)
at org.jboss.ws.core.client.HTTPRemotingConnection.invoke(HTTPRemotingConnection.java:150)
at org.jboss.ws.core.client.SOAPProtocolConnectionHTTP.invoke(SOAPProtocolConnectionHTTP.java:69)
at org.jboss.ws.core.CommonClient.invoke(CommonClient.java:369)
at org.jboss.ws.core.jaxws.client.ClientImpl.invoke(ClientImpl.java:302)
at org.jboss.ws.core.jaxws.client.ClientProxy.invoke(ClientProxy.java:181)
at org.jboss.ws.core.jaxws.client.ClientProxy.invoke(ClientProxy.java:161)
at $Proxy796.getCWSAccount(Unknown Source)
Cause: Although the client had port specified as 8004 in the endpoint URL; when the request hit the service it was coming in for port 443. We moved/"attached" the service to port 443 and the web server was able to map it to the right application. will need to figure out why/where the endpoint was changed fro 8004 to 443..