Extract string located after or between matched pattern(s) - regex

Given a string "pos:665181533 pts:11360 t:11.360000 crop=720:568:0:4 some more words"
Is it possible to extract string between "crop=" and the following space using bash and grep?
So if I match "crop=" how can I extract anything after it and before the following white space?
Basically, I need "720:568:0:4" to be printed.

I'd do it this way:
grep -o -E 'crop=[^ ]+' | sed 's/crop=//'
It uses sed which is also a standard command. You can, of course, replace it with another sequence of greps, but only if it's really needed.

I would use sed as follows:
echo "pos:665181533 pts:11360 t:11.360000 crop=720:568:0:4 some more words" | sed 's/.*crop=\([0-9.:]*\)\(.*\)/\1/'
Explanation:
s/ : substitute
.*crop= : everything up to and including "crop="
\([0-9.:]\) : match only numbers and '.' and ':' - I call this the backslash-bracketed expression
\(.*\) : match 'everything else' (probably not needed)
/\1/ : and replace with the first backslash-bracketed expression you found

I think this will work (need to recheck my reference):
awk '/crop=([0-9:]*?)/\1/'

yet another way with bash pattern substitution
PAT="pos:665181533 pts:11360 t:11.360000 crop=720:568:0:4 some more words"
RES=${PAT#*crop=}
echo ${RES%% *}
first remove all up to and including crop= found from left to right (#)
then remove all from and including the first space found from right to left (%%)

Related

regex help to end match on first occurent of a character [duplicate]

I'm trying to use sed to clean up lines of URLs to extract just the domain.
So from:
http://www.suepearson.co.uk/product/174/71/3816/
I want:
http://www.suepearson.co.uk/
(either with or without the trailing slash, it doesn't matter)
I have tried:
sed 's|\(http:\/\/.*?\/\).*|\1|'
and (escaping the non-greedy quantifier)
sed 's|\(http:\/\/.*\?\/\).*|\1|'
but I can not seem to get the non-greedy quantifier (?) to work, so it always ends up matching the whole string.
Neither basic nor extended Posix/GNU regex recognizes the non-greedy quantifier; you need a later regex. Fortunately, Perl regex for this context is pretty easy to get:
perl -pe 's|(http://.*?/).*|\1|'
In this specific case, you can get the job done without using a non-greedy regex.
Try this non-greedy regex [^/]* instead of .*?:
sed 's|\(http://[^/]*/\).*|\1|g'
With sed, I usually implement non-greedy search by searching for anything except the separator until the separator :
echo "http://www.suon.co.uk/product/1/7/3/" | sed -n 's;\(http://[^/]*\)/.*;\1;p'
Output:
http://www.suon.co.uk
this is:
don't output -n
search, match pattern, replace and print s/<pattern>/<replace>/p
use ; search command separator instead of / to make it easier to type so s;<pattern>;<replace>;p
remember match between brackets \( ... \), later accessible with \1,\2...
match http://
followed by anything in brackets [], [ab/] would mean either a or b or /
first ^ in [] means not, so followed by anything but the thing in the []
so [^/] means anything except / character
* is to repeat previous group so [^/]* means characters except /.
so far sed -n 's;\(http://[^/]*\) means search and remember http://followed by any characters except / and remember what you've found
we want to search untill the end of domain so stop on the next / so add another / at the end: sed -n 's;\(http://[^/]*\)/' but we want to match the rest of the line after the domain so add .*
now the match remembered in group 1 (\1) is the domain so replace matched line with stuff saved in group \1 and print: sed -n 's;\(http://[^/]*\)/.*;\1;p'
If you want to include backslash after the domain as well, then add one more backslash in the group to remember:
echo "http://www.suon.co.uk/product/1/7/3/" | sed -n 's;\(http://[^/]*/\).*;\1;p'
output:
http://www.suon.co.uk/
Simulating lazy (un-greedy) quantifier in sed
And all other regex flavors!
Finding first occurrence of an expression:
POSIX ERE (using -r option)
Regex:
(EXPRESSION).*|.
Sed:
sed -r ‍'s/(EXPRESSION).*|./\1/g' # Global `g` modifier should be on
Example (finding first sequence of digits) Live demo:
$ sed -r 's/([0-9]+).*|./\1/g' <<< 'foo 12 bar 34'
12
How does it work?
This regex benefits from an alternation |. At each position engine tries to pick the longest match (this is a POSIX standard which is followed by couple of other engines as well) which means it goes with . until a match is found for ([0-9]+).*. But order is important too.
Since global flag is set, engine tries to continue matching character by character up to the end of input string or our target. As soon as the first and only capturing group of left side of alternation is matched (EXPRESSION) rest of line is consumed immediately as well .*. We now hold our value in the first capturing group.
POSIX BRE
Regex:
\(\(\(EXPRESSION\).*\)*.\)*
Sed:
sed 's/\(\(\(EXPRESSION\).*\)*.\)*/\3/'
Example (finding first sequence of digits):
$ sed 's/\(\(\([0-9]\{1,\}\).*\)*.\)*/\3/' <<< 'foo 12 bar 34'
12
This one is like ERE version but with no alternation involved. That's all. At each single position engine tries to match a digit.
If it is found, other following digits are consumed and captured and the rest of line is matched immediately otherwise since * means
more or zero it skips over second capturing group \(\([0-9]\{1,\}\).*\)* and arrives at a dot . to match a single character and this process continues.
Finding first occurrence of a delimited expression:
This approach will match the very first occurrence of a string that is delimited. We can call it a block of string.
sed 's/\(END-DELIMITER-EXPRESSION\).*/\1/; \
s/\(\(START-DELIMITER-EXPRESSION.*\)*.\)*/\1/g'
Input string:
foobar start block #1 end barfoo start block #2 end
-EDE: end
-SDE: start
$ sed 's/\(end\).*/\1/; s/\(\(start.*\)*.\)*/\1/g'
Output:
start block #1 end
First regex \(end\).* matches and captures first end delimiter end and substitues all match with recent captured characters which
is the end delimiter. At this stage our output is: foobar start block #1 end.
Then the result is passed to second regex \(\(start.*\)*.\)* that is same as POSIX BRE version above. It matches a single character
if start delimiter start is not matched otherwise it matches and captures the start delimiter and matches the rest of characters.
Directly answering your question
Using approach #2 (delimited expression) you should select two appropriate expressions:
EDE: [^:/]\/
SDE: http:
Usage:
$ sed 's/\([^:/]\/\).*/\1/g; s/\(\(http:.*\)*.\)*/\1/' <<< 'http://www.suepearson.co.uk/product/174/71/3816/'
Output:
http://www.suepearson.co.uk/
Note: this will not work with identical delimiters.
sed does not support "non greedy" operator.
You have to use "[]" operator to exclude "/" from match.
sed 's,\(http://[^/]*\)/.*,\1,'
P.S. there is no need to backslash "/".
sed - non greedy matching by Christoph Sieghart
The trick to get non greedy matching in sed is to match all characters excluding the one that terminates the match. I know, a no-brainer, but I wasted precious minutes on it and shell scripts should be, after all, quick and easy. So in case somebody else might need it:
Greedy matching
% echo "<b>foo</b>bar" | sed 's/<.*>//g'
bar
Non greedy matching
% echo "<b>foo</b>bar" | sed 's/<[^>]*>//g'
foobar
Non-greedy solution for more than a single character
This thread is really old but I assume people still needs it.
Lets say you want to kill everything till the very first occurrence of HELLO. You cannot say [^HELLO]...
So a nice solution involves two steps, assuming that you can spare a unique word that you are not expecting in the input, say top_sekrit.
In this case we can:
s/HELLO/top_sekrit/ #will only replace the very first occurrence
s/.*top_sekrit// #kill everything till end of the first HELLO
Of course, with a simpler input you could use a smaller word, or maybe even a single character.
HTH!
This can be done using cut:
echo "http://www.suepearson.co.uk/product/174/71/3816/" | cut -d'/' -f1-3
another way, not using regex, is to use fields/delimiter method eg
string="http://www.suepearson.co.uk/product/174/71/3816/"
echo $string | awk -F"/" '{print $1,$2,$3}' OFS="/"
sed certainly has its place but this not not one of them !
As Dee has pointed out: Just use cut. It is far simpler and much more safe in this case. Here's an example where we extract various components from the URL using Bash syntax:
url="http://www.suepearson.co.uk/product/174/71/3816/"
protocol=$(echo "$url" | cut -d':' -f1)
host=$(echo "$url" | cut -d'/' -f3)
urlhost=$(echo "$url" | cut -d'/' -f1-3)
urlpath=$(echo "$url" | cut -d'/' -f4-)
gives you:
protocol = "http"
host = "www.suepearson.co.uk"
urlhost = "http://www.suepearson.co.uk"
urlpath = "product/174/71/3816/"
As you can see this is a lot more flexible approach.
(all credit to Dee)
sed 's|(http:\/\/[^\/]+\/).*|\1|'
There is still hope to solve this using pure (GNU) sed. Despite this is not a generic solution in some cases you can use "loops" to eliminate all the unnecessary parts of the string like this:
sed -r -e ":loop" -e 's|(http://.+)/.*|\1|' -e "t loop"
-r: Use extended regex (for + and unescaped parenthesis)
":loop": Define a new label named "loop"
-e: add commands to sed
"t loop": Jump back to label "loop" if there was a successful substitution
The only problem here is it will also cut the last separator character ('/'), but if you really need it you can still simply put it back after the "loop" finished, just append this additional command at the end of the previous command line:
-e "s,$,/,"
sed -E interprets regular expressions as extended (modern) regular expressions
Update: -E on MacOS X, -r in GNU sed.
Because you specifically stated you're trying to use sed (instead of perl, cut, etc.), try grouping. This circumvents the non-greedy identifier potentially not being recognized. The first group is the protocol (i.e. 'http://', 'https://', 'tcp://', etc). The second group is the domain:
echo "http://www.suon.co.uk/product/1/7/3/" | sed "s|^\(.*//\)\([^/]*\).*$|\1\2|"
If you're not familiar with grouping, start here.
I realize this is an old entry, but someone may find it useful.
As the full domain name may not exceed a total length of 253 characters replace .* with .\{1, 255\}
This is how to robustly do non-greedy matching of multi-character strings using sed. Lets say you want to change every foo...bar to <foo...bar> so for example this input:
$ cat file
ABC foo DEF bar GHI foo KLM bar NOP foo QRS bar TUV
should become this output:
ABC <foo DEF bar> GHI <foo KLM bar> NOP <foo QRS bar> TUV
To do that you convert foo and bar to individual characters and then use the negation of those characters between them:
$ sed 's/#/#A/g; s/{/#B/g; s/}/#C/g; s/foo/{/g; s/bar/}/g; s/{[^{}]*}/<&>/g; s/}/bar/g; s/{/foo/g; s/#C/}/g; s/#B/{/g; s/#A/#/g' file
ABC <foo DEF bar> GHI <foo KLM bar> NOP <foo QRS bar> TUV
In the above:
s/#/#A/g; s/{/#B/g; s/}/#C/g is converting { and } to placeholder strings that cannot exist in the input so those chars then are available to convert foo and bar to.
s/foo/{/g; s/bar/}/g is converting foo and bar to { and } respectively
s/{[^{}]*}/<&>/g is performing the op we want - converting foo...bar to <foo...bar>
s/}/bar/g; s/{/foo/g is converting { and } back to foo and bar.
s/#C/}/g; s/#B/{/g; s/#A/#/g is converting the placeholder strings back to their original characters.
Note that the above does not rely on any particular string not being present in the input as it manufactures such strings in the first step, nor does it care which occurrence of any particular regexp you want to match since you can use {[^{}]*} as many times as necessary in the expression to isolate the actual match you want and/or with seds numeric match operator, e.g. to only replace the 2nd occurrence:
$ sed 's/#/#A/g; s/{/#B/g; s/}/#C/g; s/foo/{/g; s/bar/}/g; s/{[^{}]*}/<&>/2; s/}/bar/g; s/{/foo/g; s/#C/}/g; s/#B/{/g; s/#A/#/g' file
ABC foo DEF bar GHI <foo KLM bar> NOP foo QRS bar TUV
Have not yet seen this answer, so here's how you can do this with vi or vim:
vi -c '%s/\(http:\/\/.\{-}\/\).*/\1/ge | wq' file &>/dev/null
This runs the vi :%s substitution globally (the trailing g), refrains from raising an error if the pattern is not found (e), then saves the resulting changes to disk and quits. The &>/dev/null prevents the GUI from briefly flashing on screen, which can be annoying.
I like using vi sometimes for super complicated regexes, because (1) perl is dead dying, (2) vim has a very advanced regex engine, and (3) I'm already intimately familiar with vi regexes in my day-to-day usage editing documents.
Since PCRE is also tagged here, we could use GNU grep by using non-lazy match in regex .*? which will match first nearest match opposite of .*(which is really greedy and goes till last occurrence of match).
grep -oP '^http[s]?:\/\/.*?/' Input_file
Explanation: using grep's oP options here where -P is responsible for enabling PCRE regex here. In main program of grep mentioning regex which is matching starting http/https followed by :// till next occurrence of / since we have used .*? it will look for first / after (http/https://). It will print matched part only in line.
echo "/home/one/two/three/myfile.txt" | sed 's|\(.*\)/.*|\1|'
don bother, i got it on another forum :)
sed 's|\(http:\/\/www\.[a-z.0-9]*\/\).*|\1| works too
Here is something you can do with a two step approach and awk:
A=http://www.suepearson.co.uk/product/174/71/3816/
echo $A|awk '
{
var=gensub(///,"||",3,$0) ;
sub(/\|\|.*/,"",var);
print var
}'
Output:
http://www.suepearson.co.uk
Hope that helps!
Another sed version:
sed 's|/[:alnum:].*||' file.txt
It matches / followed by an alphanumeric character (so not another forward slash) as well as the rest of characters till the end of the line. Afterwards it replaces it with nothing (ie. deletes it.)
#Daniel H (concerning your comment on andcoz' answer, although long time ago): deleting trailing zeros works with
s,([[:digit:]]\.[[:digit:]]*[1-9])[0]*$,\1,g
it's about clearly defining the matching conditions ...
You should also think about the case where there is no matching delims. Do you want to output the line or not. My examples here do not output anything if there is no match.
You need prefix up to 3rd /, so select two times string of any length not containing / and following / and then string of any length not containing / and then match / following any string and then print selection. This idea works with any single char delims.
echo http://www.suepearson.co.uk/product/174/71/3816/ | \
sed -nr 's,(([^/]*/){2}[^/]*)/.*,\1,p'
Using sed commands you can do fast prefix dropping or delim selection, like:
echo 'aaa #cee: { "foo":" #cee: " }' | \
sed -r 't x;s/ #cee: /\n/;D;:x'
This is lot faster than eating char at a time.
Jump to label if successful match previously. Add \n at / before 1st delim. Remove up to first \n. If \n was added, jump to end and print.
If there is start and end delims, it is just easy to remove end delims until you reach the nth-2 element you want and then do D trick, remove after end delim, jump to delete if no match, remove before start delim and and print. This only works if start/end delims occur in pairs.
echo 'foobar start block #1 end barfoo start block #2 end bazfoo start block #3 end goo start block #4 end faa' | \
sed -r 't x;s/end//;s/end/\n/;D;:x;s/(end).*/\1/;T y;s/.*(start)/\1/;p;:y;d'
If you have access to gnu grep, then can utilize perl regex:
grep -Po '^https?://([^/]+)(?=)' <<< 'http://www.suepearson.co.uk/product/174/71/3816/'
http://www.suepearson.co.uk
Alternatively, to get everything after the domain use
grep -Po '^https?://([^/]+)\K.*' <<< 'http://www.suepearson.co.uk/product/174/71/3816/'
/product/174/71/3816/
The following solution works for matching / working with multiply present (chained; tandem; compound) HTML or other tags. For example, I wanted to edit HTML code to remove <span> tags, that appeared in tandem.
Issue: regular sed regex expressions greedily matched over all the tags from the first to the last.
Solution: non-greedy pattern matching (per discussions elsewhere in this thread; e.g. https://stackoverflow.com/a/46719361/1904943).
Example:
echo '<span>Will</span>This <span>remove</span>will <span>this.</span>remain.' | \
sed 's/<span>[^>]*>//g' ; echo
This will remain.
Explanation:
s/<span> : find <span>
[^>] : followed by anything that is not >
*> : until you find >
//g : replace any such strings present with nothing.
Addendum
I was trying to clean up URLs, but I was running into difficulty matching / excluding a word - href - using the approach above. I briefly looked at negative lookarounds (Regular expression to match a line that doesn't contain a word) but that approach seemed overly complex and did not provide a satisfactory solution.
I decided to replace href with ` (backtick), do the regex substitutions, then replace ` with href.
Example (formatted here for readability):
printf '\n
<a aaa h href="apple">apple</a>
<a bbb "c=ccc" href="banana">banana</a>
<a class="gtm-content-click"
data-vars-link-text="nope"
data-vars-click-url="https://blablabla"
data-vars-event-category="story"
data-vars-sub-category="story"
data-vars-item="in_content_link"
data-vars-link-text
href="https:example.com">Example.com</a>\n\n' |
sed 's/href/`/g ;
s/<a[^`]*`/\n<a href/g'
apple
banana
Example.com
Explanation: basically as above. Here,
s/href/` : replace href with ` (backtick)
s/<a : find start of URL
[^`] : followed by anything that is not ` (backtick)
*` : until you find a `
/<a href/g : replace each of those found with <a href
Unfortunately, as mentioned, this it is not supported in sed.
To overcome this, I suggest to use the next best thing(actually better even), to use vim sed-like capabilities.
define in .bash-profile
vimdo() { vim $2 --not-a-term -c "$1" -es +"w >> /dev/stdout" -cq! ; }
That will create headless vim to execute a command.
Now you can do for example:
echo $PATH | vimdo "%s_\c:[a-zA-Z0-9\\/]\{-}python[a-zA-Z0-9\\/]\{-}:__g" -
to filter out python in $PATH.
Use - to have input from pipe in vimdo.
While most of the syntax is the same. Vim features more advanced features, and using \{-} is standard for non-greedy match. see help regexp.

extract substring with SED

I have the next strings:
for example:
input1 = abc-def-ghi-jkl
input2 = mno-pqr-stu-vwy
I want extract the first word between "-"
for the fisrt string I want to get: def
if the input is the second string, I want to get: pqr
I want to use the command SED, Could you help me please?
Use
sed 's,^[^-]*-\([^-]*\).*,\1,' file
The string after the first - will be captured up to the second - and the rest will be matched, then the matched line will be replaced with the group text.
With bash:
var='input1 = abc-def-ghi-jkl'
var=${var#*-} # remove shortest prefix `*-`, this removes `input1 = abc-`
echo "${var%%-*}" # remove longest suffix `-*`, this removes `-ghi-jkl`
Or with awk:
awk -F'-' '{print $2}' <<<'input1 = abc-def-ghi-jkl'
Use - as input field separator and print the second field.
Or with cut:
cut -d'-' -f2 <<<'input1 = abc-def-ghi-jkl'
When you want to use sed, you can choose between solutions like
# Double processing
echo "$input1" | sed 's/[^-]*-//;s/-.*//'
# Normal approach
echo "$input1" | sed -r 's/^[^-]*-([^-]*)|-.*)/\1/g'
# Funny alternative
echo "$input1" | sed -r 's/(^[^-]*-|-.*)//g'
The obvious "external" tool would be cut. You can also look at a Bash builtin solution like
[[ ${input1} =~ ([^-]*)-([^-]*) ]] && printf %s "${BASH_REMATCH[2]}"
grep solution (in my opinion this is the most natural approach, as you are only trying to find matches to a regular expression - you are not looking to edit anything, so there should be no need for the more advanced command sed)
grep -oP '^[^-]*-\K[^-]*(?=-)' << EOF
> abc-qrs-bobo-the-clown
> 123-45-6789
> blah-blah-blah
> no dashes here
> mahi-mahi
> EOF
Output
qrs
45
blah
Explanation
Look at the inputs first, included here for completeness as a heredoc (more likely you would name your file as the last argument to grep.) The solution requires at least two dashes to be present in the string; in particular, for mahi-mahi it will find no match. If you want to find the second mahi as a match, you can remove the lookahead assertion at the end of the regular expression (see below).
The regular expression does this. First note the command options: -o to return only the matched substring, not the entire line; and -P to use Perl extensions. Then, the regular expression: start from the beginning of the line (^); look for zero or more non-dash characters followed by dash, and then (\K) discard this part of the required match from the substrings found to match the pattern. Then look for zero or more non-dash characters again - this will be returned by the command. Finally, require a dash following this pattern, but do not include it in the match. This is done with a lookahead (marked by (?= ... )).

Regex parsing issue of multi-line file, replacing two consistent patterns around arbitrary persistent text [duplicate]

I'm trying to use sed to clean up lines of URLs to extract just the domain.
So from:
http://www.suepearson.co.uk/product/174/71/3816/
I want:
http://www.suepearson.co.uk/
(either with or without the trailing slash, it doesn't matter)
I have tried:
sed 's|\(http:\/\/.*?\/\).*|\1|'
and (escaping the non-greedy quantifier)
sed 's|\(http:\/\/.*\?\/\).*|\1|'
but I can not seem to get the non-greedy quantifier (?) to work, so it always ends up matching the whole string.
Neither basic nor extended Posix/GNU regex recognizes the non-greedy quantifier; you need a later regex. Fortunately, Perl regex for this context is pretty easy to get:
perl -pe 's|(http://.*?/).*|\1|'
In this specific case, you can get the job done without using a non-greedy regex.
Try this non-greedy regex [^/]* instead of .*?:
sed 's|\(http://[^/]*/\).*|\1|g'
With sed, I usually implement non-greedy search by searching for anything except the separator until the separator :
echo "http://www.suon.co.uk/product/1/7/3/" | sed -n 's;\(http://[^/]*\)/.*;\1;p'
Output:
http://www.suon.co.uk
this is:
don't output -n
search, match pattern, replace and print s/<pattern>/<replace>/p
use ; search command separator instead of / to make it easier to type so s;<pattern>;<replace>;p
remember match between brackets \( ... \), later accessible with \1,\2...
match http://
followed by anything in brackets [], [ab/] would mean either a or b or /
first ^ in [] means not, so followed by anything but the thing in the []
so [^/] means anything except / character
* is to repeat previous group so [^/]* means characters except /.
so far sed -n 's;\(http://[^/]*\) means search and remember http://followed by any characters except / and remember what you've found
we want to search untill the end of domain so stop on the next / so add another / at the end: sed -n 's;\(http://[^/]*\)/' but we want to match the rest of the line after the domain so add .*
now the match remembered in group 1 (\1) is the domain so replace matched line with stuff saved in group \1 and print: sed -n 's;\(http://[^/]*\)/.*;\1;p'
If you want to include backslash after the domain as well, then add one more backslash in the group to remember:
echo "http://www.suon.co.uk/product/1/7/3/" | sed -n 's;\(http://[^/]*/\).*;\1;p'
output:
http://www.suon.co.uk/
Simulating lazy (un-greedy) quantifier in sed
And all other regex flavors!
Finding first occurrence of an expression:
POSIX ERE (using -r option)
Regex:
(EXPRESSION).*|.
Sed:
sed -r ‍'s/(EXPRESSION).*|./\1/g' # Global `g` modifier should be on
Example (finding first sequence of digits) Live demo:
$ sed -r 's/([0-9]+).*|./\1/g' <<< 'foo 12 bar 34'
12
How does it work?
This regex benefits from an alternation |. At each position engine tries to pick the longest match (this is a POSIX standard which is followed by couple of other engines as well) which means it goes with . until a match is found for ([0-9]+).*. But order is important too.
Since global flag is set, engine tries to continue matching character by character up to the end of input string or our target. As soon as the first and only capturing group of left side of alternation is matched (EXPRESSION) rest of line is consumed immediately as well .*. We now hold our value in the first capturing group.
POSIX BRE
Regex:
\(\(\(EXPRESSION\).*\)*.\)*
Sed:
sed 's/\(\(\(EXPRESSION\).*\)*.\)*/\3/'
Example (finding first sequence of digits):
$ sed 's/\(\(\([0-9]\{1,\}\).*\)*.\)*/\3/' <<< 'foo 12 bar 34'
12
This one is like ERE version but with no alternation involved. That's all. At each single position engine tries to match a digit.
If it is found, other following digits are consumed and captured and the rest of line is matched immediately otherwise since * means
more or zero it skips over second capturing group \(\([0-9]\{1,\}\).*\)* and arrives at a dot . to match a single character and this process continues.
Finding first occurrence of a delimited expression:
This approach will match the very first occurrence of a string that is delimited. We can call it a block of string.
sed 's/\(END-DELIMITER-EXPRESSION\).*/\1/; \
s/\(\(START-DELIMITER-EXPRESSION.*\)*.\)*/\1/g'
Input string:
foobar start block #1 end barfoo start block #2 end
-EDE: end
-SDE: start
$ sed 's/\(end\).*/\1/; s/\(\(start.*\)*.\)*/\1/g'
Output:
start block #1 end
First regex \(end\).* matches and captures first end delimiter end and substitues all match with recent captured characters which
is the end delimiter. At this stage our output is: foobar start block #1 end.
Then the result is passed to second regex \(\(start.*\)*.\)* that is same as POSIX BRE version above. It matches a single character
if start delimiter start is not matched otherwise it matches and captures the start delimiter and matches the rest of characters.
Directly answering your question
Using approach #2 (delimited expression) you should select two appropriate expressions:
EDE: [^:/]\/
SDE: http:
Usage:
$ sed 's/\([^:/]\/\).*/\1/g; s/\(\(http:.*\)*.\)*/\1/' <<< 'http://www.suepearson.co.uk/product/174/71/3816/'
Output:
http://www.suepearson.co.uk/
Note: this will not work with identical delimiters.
sed does not support "non greedy" operator.
You have to use "[]" operator to exclude "/" from match.
sed 's,\(http://[^/]*\)/.*,\1,'
P.S. there is no need to backslash "/".
sed - non greedy matching by Christoph Sieghart
The trick to get non greedy matching in sed is to match all characters excluding the one that terminates the match. I know, a no-brainer, but I wasted precious minutes on it and shell scripts should be, after all, quick and easy. So in case somebody else might need it:
Greedy matching
% echo "<b>foo</b>bar" | sed 's/<.*>//g'
bar
Non greedy matching
% echo "<b>foo</b>bar" | sed 's/<[^>]*>//g'
foobar
Non-greedy solution for more than a single character
This thread is really old but I assume people still needs it.
Lets say you want to kill everything till the very first occurrence of HELLO. You cannot say [^HELLO]...
So a nice solution involves two steps, assuming that you can spare a unique word that you are not expecting in the input, say top_sekrit.
In this case we can:
s/HELLO/top_sekrit/ #will only replace the very first occurrence
s/.*top_sekrit// #kill everything till end of the first HELLO
Of course, with a simpler input you could use a smaller word, or maybe even a single character.
HTH!
This can be done using cut:
echo "http://www.suepearson.co.uk/product/174/71/3816/" | cut -d'/' -f1-3
another way, not using regex, is to use fields/delimiter method eg
string="http://www.suepearson.co.uk/product/174/71/3816/"
echo $string | awk -F"/" '{print $1,$2,$3}' OFS="/"
sed certainly has its place but this not not one of them !
As Dee has pointed out: Just use cut. It is far simpler and much more safe in this case. Here's an example where we extract various components from the URL using Bash syntax:
url="http://www.suepearson.co.uk/product/174/71/3816/"
protocol=$(echo "$url" | cut -d':' -f1)
host=$(echo "$url" | cut -d'/' -f3)
urlhost=$(echo "$url" | cut -d'/' -f1-3)
urlpath=$(echo "$url" | cut -d'/' -f4-)
gives you:
protocol = "http"
host = "www.suepearson.co.uk"
urlhost = "http://www.suepearson.co.uk"
urlpath = "product/174/71/3816/"
As you can see this is a lot more flexible approach.
(all credit to Dee)
sed 's|(http:\/\/[^\/]+\/).*|\1|'
There is still hope to solve this using pure (GNU) sed. Despite this is not a generic solution in some cases you can use "loops" to eliminate all the unnecessary parts of the string like this:
sed -r -e ":loop" -e 's|(http://.+)/.*|\1|' -e "t loop"
-r: Use extended regex (for + and unescaped parenthesis)
":loop": Define a new label named "loop"
-e: add commands to sed
"t loop": Jump back to label "loop" if there was a successful substitution
The only problem here is it will also cut the last separator character ('/'), but if you really need it you can still simply put it back after the "loop" finished, just append this additional command at the end of the previous command line:
-e "s,$,/,"
sed -E interprets regular expressions as extended (modern) regular expressions
Update: -E on MacOS X, -r in GNU sed.
Because you specifically stated you're trying to use sed (instead of perl, cut, etc.), try grouping. This circumvents the non-greedy identifier potentially not being recognized. The first group is the protocol (i.e. 'http://', 'https://', 'tcp://', etc). The second group is the domain:
echo "http://www.suon.co.uk/product/1/7/3/" | sed "s|^\(.*//\)\([^/]*\).*$|\1\2|"
If you're not familiar with grouping, start here.
I realize this is an old entry, but someone may find it useful.
As the full domain name may not exceed a total length of 253 characters replace .* with .\{1, 255\}
This is how to robustly do non-greedy matching of multi-character strings using sed. Lets say you want to change every foo...bar to <foo...bar> so for example this input:
$ cat file
ABC foo DEF bar GHI foo KLM bar NOP foo QRS bar TUV
should become this output:
ABC <foo DEF bar> GHI <foo KLM bar> NOP <foo QRS bar> TUV
To do that you convert foo and bar to individual characters and then use the negation of those characters between them:
$ sed 's/#/#A/g; s/{/#B/g; s/}/#C/g; s/foo/{/g; s/bar/}/g; s/{[^{}]*}/<&>/g; s/}/bar/g; s/{/foo/g; s/#C/}/g; s/#B/{/g; s/#A/#/g' file
ABC <foo DEF bar> GHI <foo KLM bar> NOP <foo QRS bar> TUV
In the above:
s/#/#A/g; s/{/#B/g; s/}/#C/g is converting { and } to placeholder strings that cannot exist in the input so those chars then are available to convert foo and bar to.
s/foo/{/g; s/bar/}/g is converting foo and bar to { and } respectively
s/{[^{}]*}/<&>/g is performing the op we want - converting foo...bar to <foo...bar>
s/}/bar/g; s/{/foo/g is converting { and } back to foo and bar.
s/#C/}/g; s/#B/{/g; s/#A/#/g is converting the placeholder strings back to their original characters.
Note that the above does not rely on any particular string not being present in the input as it manufactures such strings in the first step, nor does it care which occurrence of any particular regexp you want to match since you can use {[^{}]*} as many times as necessary in the expression to isolate the actual match you want and/or with seds numeric match operator, e.g. to only replace the 2nd occurrence:
$ sed 's/#/#A/g; s/{/#B/g; s/}/#C/g; s/foo/{/g; s/bar/}/g; s/{[^{}]*}/<&>/2; s/}/bar/g; s/{/foo/g; s/#C/}/g; s/#B/{/g; s/#A/#/g' file
ABC foo DEF bar GHI <foo KLM bar> NOP foo QRS bar TUV
Have not yet seen this answer, so here's how you can do this with vi or vim:
vi -c '%s/\(http:\/\/.\{-}\/\).*/\1/ge | wq' file &>/dev/null
This runs the vi :%s substitution globally (the trailing g), refrains from raising an error if the pattern is not found (e), then saves the resulting changes to disk and quits. The &>/dev/null prevents the GUI from briefly flashing on screen, which can be annoying.
I like using vi sometimes for super complicated regexes, because (1) perl is dead dying, (2) vim has a very advanced regex engine, and (3) I'm already intimately familiar with vi regexes in my day-to-day usage editing documents.
Since PCRE is also tagged here, we could use GNU grep by using non-lazy match in regex .*? which will match first nearest match opposite of .*(which is really greedy and goes till last occurrence of match).
grep -oP '^http[s]?:\/\/.*?/' Input_file
Explanation: using grep's oP options here where -P is responsible for enabling PCRE regex here. In main program of grep mentioning regex which is matching starting http/https followed by :// till next occurrence of / since we have used .*? it will look for first / after (http/https://). It will print matched part only in line.
echo "/home/one/two/three/myfile.txt" | sed 's|\(.*\)/.*|\1|'
don bother, i got it on another forum :)
sed 's|\(http:\/\/www\.[a-z.0-9]*\/\).*|\1| works too
Here is something you can do with a two step approach and awk:
A=http://www.suepearson.co.uk/product/174/71/3816/
echo $A|awk '
{
var=gensub(///,"||",3,$0) ;
sub(/\|\|.*/,"",var);
print var
}'
Output:
http://www.suepearson.co.uk
Hope that helps!
Another sed version:
sed 's|/[:alnum:].*||' file.txt
It matches / followed by an alphanumeric character (so not another forward slash) as well as the rest of characters till the end of the line. Afterwards it replaces it with nothing (ie. deletes it.)
#Daniel H (concerning your comment on andcoz' answer, although long time ago): deleting trailing zeros works with
s,([[:digit:]]\.[[:digit:]]*[1-9])[0]*$,\1,g
it's about clearly defining the matching conditions ...
You should also think about the case where there is no matching delims. Do you want to output the line or not. My examples here do not output anything if there is no match.
You need prefix up to 3rd /, so select two times string of any length not containing / and following / and then string of any length not containing / and then match / following any string and then print selection. This idea works with any single char delims.
echo http://www.suepearson.co.uk/product/174/71/3816/ | \
sed -nr 's,(([^/]*/){2}[^/]*)/.*,\1,p'
Using sed commands you can do fast prefix dropping or delim selection, like:
echo 'aaa #cee: { "foo":" #cee: " }' | \
sed -r 't x;s/ #cee: /\n/;D;:x'
This is lot faster than eating char at a time.
Jump to label if successful match previously. Add \n at / before 1st delim. Remove up to first \n. If \n was added, jump to end and print.
If there is start and end delims, it is just easy to remove end delims until you reach the nth-2 element you want and then do D trick, remove after end delim, jump to delete if no match, remove before start delim and and print. This only works if start/end delims occur in pairs.
echo 'foobar start block #1 end barfoo start block #2 end bazfoo start block #3 end goo start block #4 end faa' | \
sed -r 't x;s/end//;s/end/\n/;D;:x;s/(end).*/\1/;T y;s/.*(start)/\1/;p;:y;d'
If you have access to gnu grep, then can utilize perl regex:
grep -Po '^https?://([^/]+)(?=)' <<< 'http://www.suepearson.co.uk/product/174/71/3816/'
http://www.suepearson.co.uk
Alternatively, to get everything after the domain use
grep -Po '^https?://([^/]+)\K.*' <<< 'http://www.suepearson.co.uk/product/174/71/3816/'
/product/174/71/3816/
The following solution works for matching / working with multiply present (chained; tandem; compound) HTML or other tags. For example, I wanted to edit HTML code to remove <span> tags, that appeared in tandem.
Issue: regular sed regex expressions greedily matched over all the tags from the first to the last.
Solution: non-greedy pattern matching (per discussions elsewhere in this thread; e.g. https://stackoverflow.com/a/46719361/1904943).
Example:
echo '<span>Will</span>This <span>remove</span>will <span>this.</span>remain.' | \
sed 's/<span>[^>]*>//g' ; echo
This will remain.
Explanation:
s/<span> : find <span>
[^>] : followed by anything that is not >
*> : until you find >
//g : replace any such strings present with nothing.
Addendum
I was trying to clean up URLs, but I was running into difficulty matching / excluding a word - href - using the approach above. I briefly looked at negative lookarounds (Regular expression to match a line that doesn't contain a word) but that approach seemed overly complex and did not provide a satisfactory solution.
I decided to replace href with ` (backtick), do the regex substitutions, then replace ` with href.
Example (formatted here for readability):
printf '\n
<a aaa h href="apple">apple</a>
<a bbb "c=ccc" href="banana">banana</a>
<a class="gtm-content-click"
data-vars-link-text="nope"
data-vars-click-url="https://blablabla"
data-vars-event-category="story"
data-vars-sub-category="story"
data-vars-item="in_content_link"
data-vars-link-text
href="https:example.com">Example.com</a>\n\n' |
sed 's/href/`/g ;
s/<a[^`]*`/\n<a href/g'
apple
banana
Example.com
Explanation: basically as above. Here,
s/href/` : replace href with ` (backtick)
s/<a : find start of URL
[^`] : followed by anything that is not ` (backtick)
*` : until you find a `
/<a href/g : replace each of those found with <a href
Unfortunately, as mentioned, this it is not supported in sed.
To overcome this, I suggest to use the next best thing(actually better even), to use vim sed-like capabilities.
define in .bash-profile
vimdo() { vim $2 --not-a-term -c "$1" -es +"w >> /dev/stdout" -cq! ; }
That will create headless vim to execute a command.
Now you can do for example:
echo $PATH | vimdo "%s_\c:[a-zA-Z0-9\\/]\{-}python[a-zA-Z0-9\\/]\{-}:__g" -
to filter out python in $PATH.
Use - to have input from pipe in vimdo.
While most of the syntax is the same. Vim features more advanced features, and using \{-} is standard for non-greedy match. see help regexp.

Deleting everything after a pattern in Unix

I have a string replenishment_category string,Date string, I want to delete everything starting with Date (including it), also the comma before it if it is present.
I have the string to be replaced stored in a variable:
PARTITION_COLUMN='Date'
I tried sed to replace everything after the variable PARTITION_COLUMN
echo "replenishment_category string,Date string" | sed "s/"$PARTITION_COLUMN".* //g"
but the output still has the string that follows the date:
replenishment_category string,string
How do I remove the string part and also the comma preceding the Date?
Try this:
echo "replenishment_category string,Date string" | sed "s/$PARTITION_COLUMN.*//"
Notice the space removed after .* and the double quote around the entire command.
You could do this with shell parameter expansion alone, assuming you have extended globs enabled (shopt -s extglob):
$ var='replenishment_category string,Date string'
$ part_column=Date
$ echo "${var%%?(,)"$part_column"*}"
replenishment_category string
The ${word%%pattern} expansion works without extended globs and removes the longest match of pattern from the end of $word.
The ?(pattern) extended pattern matches zero or one occurrences of pattern and is used to remove the comma if present.
"$part_column"* matches any string that begins with the expansion of $part_column. Quoting it is not required in the example, but good practice to prevent glob characters from expanding.
Since you want to remove variable as well as comma before it so following sed may help you here.
echo "replenishment_category string,Date string" | sed "s/,$PARTITION_COLUMN.*//g"
sed would obviously work here:
echo "replenishment_category string,Date string" | sed "s/\b,$PARTITION_COLUMN.*//"
Output:
replenishment_category string

why am I getting spaces in sed 's/[a-z]*/(&)/g'

I want to add parenthesis to all words
I used
sed 's/[a-z]*/(&)/g'
inputfile.txt
hola crayola123456
abc123456
however I am selecting all the spaces
(hola) (crayola)1()2()3()4()5()6()
(abc)1()2()3()4()5()6()
shouldn't I be getting only the words?
I am using mac sed
thanks
The reason is that you are using a regex that can match an empty string. [a-z]* can match any empty space before a char since regex "sees" (i.e. checks) these positions. You need to replace the * (matching zero or more occurrences) with + quantifier (to match one or more characters).
Here is an example of how this can be implemented in GNU sed:
echo "hola crayola123456" | sed 's/[a-z]\+/(&)/g'
See the online demo
On Mac, as per anubhava's comment, you need to use E option and use an unescaped +:
echo "hola crayola123456" | sed -E 's/[a-z]+/(&)/g'
Two errors:
* means 0 or more matches, you need at least one match, then +;
sed (OSX version) uses basic regexp by default (so + isn't available), you should activate extended regexp syntax with option -E.
Then:
echo "hola abc1234 foo12 bar" | sed -E 's/[a-z]+/(&)/g'
produces:
(hola) (abc)1234 (foo)12 (bar)
Actually sed is quite inconsistent in handling matches. From pure regex theory I would tell that any sequence [a-z]* in the line should emit the (&), so the theoretical perfect result would be (hola)() (crayola)()1()2()3()4()5()6, imho: First match [a-z]* hola, then match [a-z]* as the empty string for the next char , as did not match it will be echoed ... and so on...
The Plan9 sed for example emits (hola)() (crayola)()1()2()3()4()5()6.
What the Linux and BSD/Mac sed do here is quite strange. You can see the effect if you compare "hola1" with "hola1a": (hola)1() and (hola)1(a).