Following is the abstraction of string class.
class string {
public:
string(int n = 0) : buf(new char[n + 1]) { buf[0] = '\0'; }
string(const char *);
string(const string &);
~string() { delete [] buf; }
char *getBuf() const;
void setBuf(const char *);
string & operator=(const string &);
string operator+(const string &);
string operator+(const char *);
private:
char *buf;
};
string operator+(const char *, const string &);
std::ostream& operator<<(std::ostream&, const string&);
I want to know why these two operator overloaded functions
string operator+(const char *, const string &);
std::ostream& operator<<(std::ostream&, const string&);
are not class member function or friend functions? I know the two parameter operator overloaded functions are generally friend functions (I am not sure, I would appreciate if you could enlighten on this too) however my prof did not declare them as friend too. Following are the definitions of these function.
string operator+(const char* s, const string& rhs) {
string temp(s);
temp = temp + rhs;
return temp;
}
std::ostream& operator<<(std::ostream& out, const string& s) {
return out << s.getBuf();
}
Could anyone explain this with a small example, or direct me to similar question. Thanks in Advance.
Regards
The friend keyword grants access to the protected and private members of a class. It is not used in your example because those functions don't need to use the internals of string; the public interface is sufficient.
friend functions are never members of a class, even when defined inside class {} scope. This is a rather confusing. Sometimes friend is used as a trick to define a non-member function inside the class {} braces. But in your example, there is nothing special going on, just two functions. And the functions happen to be operator overloads.
It is poor style to define some operator+ overloads as members, and one as a non-member. The interface would be improved by making all of them non-members. Different type conversion rules are applied to a left-hand-side argument that becomes this inside the overload function, which can cause confusing bugs. So commutative operators usually should be non-members (friend or not).
Let's talk about operator +. Having it as a non member allows code such as the following
string s1 = "Hi";
string s2 = "There";
string s3;
s3 = s1 + s2;
s3 = s1 + "Hi";
s3 = "Hi" + s1;
The last assignment statement is not possible if operator+ is a member rather than a namespace scope function. But if it is a namespace scope function, the string literal "Hi" is converted into a temporary string object using the converting constructor "string(const char *);" and passed to operator+.
In your case, it was possible to manage without making this function a friend as you have accessors for the private member 'buf'. But usually, if such accessors are not provided for whatever reason, these namespace scope functions need to be declared as friends.
Let's now talk about operator <<.
This is the insertion operator defined for ostream objects. If they have to print objects of a user defined type, then the ostream class definition needs to be modified, which is not recommended.
Therefore, the operator is overloaded in the namespace scope.
In both the cases, there is a well known principle of Argument Dependent Lookup that is the core reason behind the lookup of these namespace scope functions, also called Koenig Lookup.
Another interesting read is the Namespace Interface Principle
Operators can be overloaded by member functions and by standalone (ordinary) functions. Whether the standalone overloading function is a friend or not is completely irrelevant. Friendship property has absolutely no relation to operator overloading.
When you use a standalone function, you might need direct access to "hidden" (private or protected) innards of the class, which is when you declare the function as friend. If you don't need this kind of privileged access (i.e. you can implement the required functionality in terms of public interface of the class), there's no need to declare the function as friend.
That's all there is to it.
Declaring a standalone overloading function as friend became so popular that people often call it "overloading by a friend function". This is really a misleading misnomer, since, as I said above, friendship per se has nothing to do with it.
Also, people sometimes declare overloading function as friend even if they don't need privileged access to the class. They do it because a friend function declaration can incorporate immediate inline definition of the function right inside the class definition. Without friend one'd be forced to do a separate declaration and a separate definition. A compact inline definition might just look "cleaner" in some cases.
I'm a bit rusty with C++ overloads but I would complete the above answers by this simple memo :
If the type of the left-hand operand is a user-defined type (a class, for instance), you should (but you don't have to) implement the operator overloading as a member function. And keep in mind that if these overloads -- which will most likely be like +, +=, ++... -- modify the left-hand operand, they return a reference on the calling type (actually on the modified object). That is why, e.g. in Coplien's canonical form, the operator= overloading is a member function and returns a "UserClassType &" (because actually the function returns *this).
If the type of the left-hand operand is a system type (int, ostream, etc...), you should implement the operator overloading as a standalone function.
By the way, I've always been told that friend keyword is bad, ugly and eats children. I guess it's mainly a matter of coding style, but I would therefore advice you to be careful when you use it, and avoid it when you can.
(I've never been faced to a situation where its use was mandatory yet, so I can't really tell ! )
(And sorry for my bad English I'm a bit rusty with it too)
Scy
Related
I have a class that represents a special number.
class SecretInteger
{
private:
unsigned int *data;
size_t length;
public:
SecretInteger operator+(const SecretInteger other) const;
}
I can't allow any other part of my code have access to the data variable. However, my operator+ function MUST be able to see it. Usually in this case I know that using the friend keyword is the only way to do it. However when I write:
friend SecretInteger operator+(const SecretInteger other);
It claims that the operator+ cannot be declared as friend, even though I've previously wrote friend std::ostream& operator<<(std::ostream& stream, const SecretInteger val); and it works fine.
What options do I have available to me? If I have a public method like
const *unsigned int getData() const; I think even then it doesn't actually make the variable returned const right? I'd really prefer not to have a getData() method and instead just declare the functions that have access as friend.
You don't declare a member function as a friend, friend is to give non-member functions access to internals, and a one operand overload of operator+ is a member function.
In any event, if you implement the binary operators properly, you shouldn't need to give out friendship at all. Implement += as a member function (no need for friend, a class is always "friends" with itself), then implement a non-member + operator in terms of +=, which uses +='s access to the internals to avoid the whole issue of friendship.
The basic rules for overloading can be found here and should help a lot.
This question already has answers here:
Operator overloading : member function vs. non-member function?
(2 answers)
Closed 8 years ago.
I have read this at many places which recommend of using "friend" while overload operators but no body explained it clearly as to why it is really needed? Why can not we declare them as plain member function? Any shortcoming?
Googled this but did not get any clear answer.
Sometimes you can't declare operator overload as a member function, like in IO operator<< and operator>>. The first parameter of these functions has to be ostream or istream, which are library classes and you can't extend them, declaring such functions as friend gives them access to private variables of your class.
Using friend means it's a nonmember friend function.
For improving encapsulation by minimizing dependencies, it's better to declare nonmember nonfriend functions. If it need to access the private/protected member of the class, make it friend. At last, make it a member function.
Here's an algorithm to determine whether a function should be a member and/or friend, from [C++ Coding Standards: 101 Rules, Guidelines, and Best Practices By Herb Sutter, Andrei Alexandrescu](Item 44. Prefer writing nonmember nonfriend functions):
// If you have no choice then you have no choice; make it a member if it must be:
If the function is one of the operators =, ->, [], or (), which must be members:
Make it a member.
// If it can be a nonmember nonfriend, or benefits from being a nonmember friend, do it:
Else if: a) the function needs a different type as its left-hand argument (as do operators >> or <<, for example); or b) it needs type conversions on its leftmost argument; or c) it can be implemented using the class's public interface alone:
Make it a nonmember (and friend if needed in cases a) and b) ).
If it needs to behave virtually:
Add a virtual member function to provide the virtual behavior, and implement the nonmember in terms of that.
Else: Make it a member.
In some case, such as above-mentioned a) and b), you can't achieve them by member function, you have to declare them as nonmember function, and make them friend if need to access the private/protected member of the class.
There are a few reasons people use friend:
sometimes granting friendship is actually reasonable, as the public API shouldn't expose some members than need to be compared
it's convenient for a lazy programmer to grant access to all the private and protected data members, ensuring you can write the operator implementation without needing to go back to grant access later or use a less obvious/direct public function (that's NOT a good reason, just a lazy one)
you can define the operator function inside the class, where any template parameters, typedefs, constants etc. don't need to be explicitly qualified as they would in the surrounding [namespace] scope. That's considerably simpler for those new to C++.
e.g.:
template <typename T>
struct X
{
friend bool operator==(const X& lhs, const X& rhs) { ... }
};
...vs...
...struct X as above without ==...
template <typename T>
bool operator==(const X<T>& lhs, const X<T>& rhs) { ... }
in a two-birds-with-one-stone scoop, it makes the function nominally inline, avoiding One Definition Rule complications
Only the first reason above is a compelling functional reason for making the operator a friend, rather than making it a non-member function, given the lesser encapsulation and correspondingly higher maintenance burden involved.
There are excellent reasons though to prefer either a friend or non-friend non-member function to a member function, as an implicit constructor can then kick in to allow the operator to work with one instance of the class and another value from which a second instance can be constructed:
struct X { X(int); };
bool operator==(const X& lhs, const X& rhs);
x == 3; // ok for member or non-member operator==
3 == x; // only works for non-member operator== after implicit X(3) for lhs
You are listing two options only for overloaded operator, while actually there are three:
global function, not friend
member function
global function, friend of the class
You did not list the first one, and yet it is the recommended one. If you can define an operator in terms of existing class public interface, define it as global function outside the class. In this way you do not extend the class public interface without need, minimizing the number of functions with access to the class private members.
What to do if the operator needs to access the class private members? Then you have two options - member function or a friend global function. From those two member function is preferable because it is cleaner. However, in some cases it is not possible to define an overloaded operator as the member function. If the object of your class is right-hand argument to two-argument operator, then global function is the only choice.
I assume that we are comparing global-scope friends that are defined in class and non-friends.
The reasons that the former is sometimes preferred are that such functions...
... need access to the data members for the operation to be performed. This can also be done by loosening encapsulation by providing the data through public getters, but that's not always desired.
... shall only be found via ADL to avoid pollution of some namespaces and overload candidate sets. (Only friend functions that are defined in the class they are a friend of satisfy this!)
Moreover, a minor goodie is that for class templates, it's easier to define a global function that operates on specializations inside them since we avoid making the function a template. Also the function is implicitly inline. All this shortens the code, but is no primary reason.
If your implementation followed proper data encapsulation then you might not exposed your data variables to outside world and all data members will be declared as private.
But using operator overloading most of the times you will be accessing the data members , please note it here you will be accessing the data members outside your class. So to provide access to the data members outside your class it is advised to declare the operator overloaded function as friend.
But this might not be required for unary operators , as it will operate on the data members of the particular class in which it is called.
Let me know if you need any examples for your understanding.
There are serious advantages to non-member functions when dealing with operators.
Most operators are binary (take two arguments) and somewhat symmetrical, and with a member operator they only work if *this is the left-hand side argument. So you need to use a non-member operator.
The friend pattern both gives the operator full access to the class (and, operators are usually intimate enough that this isn't harmful), and it makes it invisible outside of ADL. In addition, there are significant advantages if it is a template class.
Invisible outside of ADL lets you do crazy stuff like this:
struct bob {
template<class Lhs, class Rhs>
friend bob operator+( Lhs&&, Rhs&& ) { /* implementation */ }
}
here our operator+ is a template that seemingly matches anything. Except because it can only be found via ADL on bob, it will only be matched if it is used on at least one bob object. This technique can let you pick up on rvalue/lvalue overloads, do SFINAE testing on properties of types, etc.
Another advantage with template types is that the operator ends up not being a template function. look here:
template<class T>
struct X {};
template<class T>
bool operator==( X<T>, X<T> ) { return true; }
template<class T>
struct Y {
friend bool operator==( Y, Y ) { return true; }
};
struct A {
template<class T>
operator X<T>() const { return {}; }
};
struct B {
template<class T>
operator Y<T>() const { return {}; }
};
int main() {
A a;
X<int> x;
B b;
Y<int> y;
b == y; // <-- works!
a == x; // <-- fails to compile!
}
X<T> has a template operator==, while Y<T> has a friend operator==. The template version must pattern-match both arguments to be a X<T>, or it fails. So when I pass in an X<T> and a type convertible to X<T>, it fails to compile, as pattern matching does not do user defined conversions.
On the other hand, Y<T>'s operator== is not a template function. So when b == y is called, it is found (via ADL on y), then b is tested to see if it can convert to a y (it can be), and the call succeeds.
template operators with pattern matching are fragile. You can see this problem in the standard library in a few points where an operator is overloaded in ways that prevent conversion from working. Had the operator been declared a friend operator instead of a public free template operator, this problem can be avoided.
Which C++ operators can not be overloaded at all without friend function?
You only need a friend declaration if:
You define the operator as a standalone function outside the class, and
The implementation needs to use private functions or variables.
Otherwise, you can implement any operator without a friend declaration. To make this a little bit more concrete... one can define various operators both inside and outside of a class*:
// Implementing operator+ inside a class:
class T {
public:
// ...
T operator+(const T& other) const { return add(other); }
// ...
};
// Implementing operator+ outside a class:
class T {
// ...
};
T operator+(const T& a, const T& b) { return a.add(b); }
If, in the example above, the "add" function were private, then there would need to be a friend declaration in the latter example in order for operator+ to use it. However, if "add" is public, then there is no need to use "friend" in that example. Friend is only used when granting access is needed.
*There are cases where an operator cannot be defined inside a class (e.g. if you don't have control over the code of that class, but would still like to provide a definition where that type is on the left-hand side, anyway). In those cases, the same statement regarding friend declarations still holds true: a friend declaration is only needed for access purposes. As long as the implementation of the operator function relies only on public functions and variables, a friend declaration is not needed.
The operators where the left-hand-side operand is not the class itself. For example cout << somtething can be achieved via defining a std::ostream& operator<<(std::ostream& lhs, Something const & rhs); function, and marking them as friend inside the class.
EDIT: Friending is not needed, ever. But it can make things simpler.
The only reason to use friend function is to access the private(including protected) member variable and functions.
You never need a friend function. If you don't want the operator to
be a member (usually the case for binary operators which do not modify
their operands), there's no requirement for it to be a friend. There
are two reasons one might make it a friend, however:
in order to access private data members, and
in order to define it in the class body (even though it is not a
member), so that ADL will find it
The second reason mainly applies to templates, but it's common to define
operators like + and - in a template base class, in terms of +=
and -=, so this is the most common case.
Operator overloading and friendship are orthogonal concepts. You need to declare a function (any function) friend whenever it needs access to a private member of the type, so if you overload an operator as a function that is not a member and that implementation needs access to the private members, then it should be friend.
Note that in general it is better not to declare friends, as that is the highest coupling relationship in the language, so whenever possible you should implement even free function overloads of operators in terms of the public interface of your type (allowing you to change the implementation of the type without having to rewrite the operators). In some cases the recommendation would be to implement operatorX as a free function in terms of operatorX= implemented as a public member function (more on operator overloading here)
There is an specific corner case, with class templates, where you might want to declare a free function operator as a friend of the template just to be able to define it inside the template class, even if it does not need access to private members:
template <typename T>
class X {
int m_data;
public:
int get_value() const { return m_data; }
friend std::ostream& operator<<( std::ostream& o, X const & x ) {
return o << x.get_value();
}
};
This has the advantage that you define a single non-templated function as a friend in a simple straightforward way. To move the definition outside of the class template, you would have to make it a template and the syntax becomes more cumbersome.
You need to use a friend function when this is not the left-hand-side, or alternatively, where this needs to be implicitly converted.
Edit: And, of course, if you actually need the friend part as well as the free function part.
operators [] -> =
Must be a member functions.
Other binary operators acceptable for overloading can be write in function form or in memeber-function form.
Operators acceptable for overloading is all unary and binary C++ operators except
: . :: sizeof typeid ?
I feel I have a bit of a hole in my understanding of the friend keyword.
I have a class, presentation. I use it in my code for two variables, present1 and present2, which I compare with ==:
if(present1==present2)
Here's how I defined the operator == (in class presentation):
bool operator==(const presentation& p) const;
However, I was told that using friend and defining it outside of the class is better:
friend bool operator==(presentation&, presentation&);
Why? What's the difference between the two?
Your solution works, but it's less powerful than the friend approach.
When a class declares a function or another class as friend it means that friend function or class have access to the declaring class' privates and protected members. It's as if the declared entity was a member of the declaring class.
If you define operator==() as a member function then just like with the friend case the member function has full access to the class' members. But because it is a member function it specifies a single parameter, as the first parameter is implied to be this: an object of type presentation (or a descendent thereof). If, however, you define the function as a non-member then you can specify both parameters, and this will give you the flexibility of comparing any two types that can cast into a presentation using that same function.
For example:
class presentation {
friend bool operator==(const presentation&, const presentation&);
// ...
};
class Foo : public presentation { /* ... */ };
class Bar : public presentation { /* ... */ };
bool operator==(const presentation& p1, const presentation& p2)
{
// ...
}
bool func(const Foo& f, const Bar& b, const presentation& p)
{
return f == b || f == p );
}
Lastly, this raises the question "why the friend declaration?". If the operator==() function does not need access to private members of presentation then indeed the best solution is to make it a non-member, non-friend function. In other words, don't give a function access privileges which is doesn't need.
In the first case, your function operator== is a nonstatic class member. It has therefore access to private and protected member variables.
In the second case, the operator is externally declared, therefore it should be defined as a friend of the class to access those member variables.
An operator implemented as a method, can only be called, if the left hand side expression is a variable (or a reference to the object) of the class, the operator is defined for.
In case of an operator== usually you are interested in comparing two objects of the same class. Implementation, as a method solves your problem here.
Imagine however, that you write a string class and you want an operator, to work in this scenario:
const char *s1 = ...
MyString s2 = ...
if(s1 == s2){...
To make the expression s1 == s2 legal, you have to define an opetator== as a function external to MyString class.
bool operator==(const char *, const MyString&);
If the operator needs an access to the private members if your class, it has to be a friend of your class.
In case of operators << and >>, that work on streams, you define an operator, whose left operand is a stream instance and the right one is your class, so they can't be methods of your class. Like in the example above, they have to be functions external to your class and friends, if the access to private members is required.
I like Benoit's answer (but I can't vote it up), but I figure an example wouldn't hurt to clarify it. Here's some Money code I have (assume everything else is placed right):
// header file
friend bool operator ==(const Money, const Money); // are the two equal?
// source file
bool operator ==(const Money a1, const Money a2)
{
return a1.all_cents == a2.all_cents;
}
Hope that helps.
Take a look at this sorta duplicate here: should-operator-be-implemented-as-a-friend-or-as-a-member-function
What is important to point out, this linked question is about << and >> which should be implemented as friends since the two operand are different types.
In your case it makes sense to implement it as part of the class. The friend technique is used (and useful) for cases where more than one type is used and often does not apply to == and !=.
I have a vector of Student objects which I want to sort using #include <algorithm> and sort(list.begin(), list.end());
In order to do this, I understand that I need to overload the "<" operator but after trying (and failing) with several methods suggested online, I am running out of ideas.
Here is my latest attempt:
In Student.h...
...
using namespace std;
class Student
{
friend bool operator <(const Student& first, const Student& second);
public:
...
private:
...
};
And in Student.cpp...
...
#include "Student.h"
using namespace std;
...
bool operator <(const Student& first, const Student& second)
{
return first.Name() < second.Name();
}
where "Name()" is a constant function which returns a string.
The program compiles and runs, but my operator function is never called during the sort and when I tried comparing two Student objects like s1 < s2 I got an "error: overloaded operator not found"
How can I correctly overload this operator so that my sort will work as I intend?
You didn't say which compiler you were using, but I suspect you're using a fairly recent one that implements the "friend is not a declaration" rule. The friend statement inside the class doesn't serve as a function declaration; other modules that include Student.h don't see any declaration of the function. It's visible only inside the Student.cpp file. (Older compilers don't have this rule, and treat a friend declaration as a function declaration.)
The function doesn't need to be a friend, since it doesn't use any private members of the Student class (I'm assuming Name() is public). Move the function declaration outside the class, and replace "friend" with "extern", and it should work.
It is possible to make the operator a member function, as some posters above suggested, but it isn't necessary. Making comparison operators member functions is generally frowned upon, because it means that the two arguments aren't treated symmetrically (one is the invisible "this" argument, the other is a normal function argument), which can lead to surprising results in some cases (for example, different type conversions may be applied to the arguments).
I wouldn't use a friend here, and I'm not sure it works at all. What I would use is...
class Student
{
public:
bool operator< (const Student& second) const;
};
bool Student::operator< (const Student& second) const
{
return (Name() < second.Name());
}
Note the trailing const, indicating that within operator<, *this is constant.
EDIT I cannot delete this answer because it was accepted, but I would if I could. I also can't replace it with a correct one. See Drew Dormanns comment below, and Ross Smiths answer.
By the way, with a function this simple I would personally just do this, unless the style guide bans the definition of functions inside class definitions:
class Student
{
friend bool operator <(const Student& first, const Student& second)
{
return first.Name() < second.Name();
}
...
};
This form of the "friend" declaration lets you define a non-member operator< inside the body of the class. It's still a friend, so Name() can be private if desired.
Well, you could do it as an internal operator:
class Student
{
public:
bool operator <(const Student& second) const;
...
private:
...
};
With an implementation comparing 'this' to second. The question in my mind is: Does the 'Name' method come in a const flavor? Because if it doesn't, then you can't write a const method that uses it.