Hi i'm trying to install doctrine2 to zf2 via composer.
I'm getting error:
Fatal error: Uncaught exception 'Zend\ModuleManager\Exception\RuntimeException' with message 'Module (DoctrineModule) could not be initialized.'
I followed this steps https://github.com/doctrine/DoctrineORMModule
my application.config looks like this:
return array(
'modules' => array(
'Application',
'DoctrineModule',
'DoctrineORMModule',
'Album',
'User'
),
'module_listener_options' => array(
'config_glob_paths' => array(
'config/autoload/{,*.}{global,local}.php',
),
'module_paths' => array(
'./module',
'./vendor',
),
),
);
My composer.json:
"minimum-stability": "dev",
"require": {
"php": ">=5.3.3",
"zendframework/zendframework": "2.*",
"doctrine/doctrine-orm-module": "dev-master",
"zendframework/zend-developer-tools": "*",
"bjyoungblood/bjy-profiler": "*"
},
All needed doctrine librarys are in vendor/doctrine directory. I guess it's something wrong with autoloading.
After composer update i get message:
[ErrorException]
proc_open(): CreateProcess failed, error code - 267
i can't tell wath it means, but maybe this will be helpfull.
Second thing is that on https://github.com/doctrine/DoctrineORMModule there is section:
Installation steps (without composer) and point 3. setup PSR-0 autoloading for namespace DoctrineORMModule ...where can I setup this thing ?
If some of vendor folders was created on another machine, this can lead to the error you got. So perform the following.
Try to remove composer.lock and ./vendor folder.
Then php composer.phar self-update
Run php composer.phar install to re-install dependencies.
As of https://github.com/composer/composer/issues/1063 and https://github.com/composer/composer/issues/1346 this looks like a problem with the setup of PHP under your environment (which I assume is windows).
The modules weren't installed correctly and composer did not dump the autoloader correctly because it crashed during the installation process.
Try repeating the installation process in a different path and check that you're using the latest version of composer with php composer.phar self-update
Related
Trying to import Geolib from npm by:
npm install geolib --save
which generates in package.json
"dependencies": {
"bower": "^1.8.8",
"ember-cli": "~2.18.2",
"ember-cli-less": "3.0.1",
"geolib": "^3.3.1"
},
then in my test.js component:
import { getDistance } from 'geolib';
But ( yes, there is but ) when i access a page, it generates error:
loader.js:228 Uncaught Error: Could not find module `geolib` imported from `wash-app-dashboard/components/test`
at missingModule (loader.js:228)
at findModule (loader.js:239)
at Module.findDeps (loader.js:173)
at findModule (loader.js:243)
at requireModule (loader.js:26)
at Class._extractDefaultExport (index.js:389)
at Class.resolveOther (index.js:109)
at Class.superWrapper [as resolveOther] (ember-utils.js:418)
at Class.resolve (resolver.js:133)
at _resolve (container.js:886)
Something wrong with my settings, or what ? Cant find any solution but comment out the code.
Edit:
I know, i've got an old project to work on in my hand. Currently upgrading from 2.4 ember to 2.18 ( then to latest ember ).
I see you have "ember-cli": "~2.18.2", installed. That is a pretty old ember-cli version. Back then ember-auto-import was not part of the default blueprint.
So do you have ember-auto-import installed? It is what basically makes imports to just work.
THE SITUATION:
I am implementing unit-testing in my Vue app, using vue-test-utils with Jest configuration.
When I am testing simple components everything is fine. But when I am testing components that import other dependencies, the test fails.
CONFIGURATION:
Vue version: 2.5.17
#vue/test-utils: 1.0.0-beta.20
cli-plugin-unit-jest: 3.0.3
babel-jest: 23.0.1
THE ERROR MESSAGE:
The exact error message depends on which dependency I am importing.
For example with epic-spinners the error is:
SyntaxError: Unexpected token import
With vue-radial-progress the error is:
SyntaxError: Unexpected token <
HOW TO REPRODUCE:
Make a fresh install of vue (with Jest as unit testing suite)
Run the example test, it should pass
Install a dependency (for example: npm install --save epic-spinners)
Import the dependency inside the HelloWorld component
Run the test again (without changing anything)
If I do these steps, the test fails with the above error message.
THE QUESTION:
How can I handle dependencies import in vue-test-utils / Jest ?
The problem was that some modules may not be compiled correctly.
The solution is to use the transformIgnorePatterns property of the Jest settings. That is, from the docs:
An array of regexp pattern strings that are matched against all source
file paths before transformation. If the test path matches any of the
patterns, it will not be transformed.
In my case, this is how I have solved the issue:
transformIgnorePatterns: [
"node_modules/(?!epic-spinners|vue-radial-progress)"
],
EDIT:
This is my jest.config.js
module.exports = {
moduleFileExtensions: [
'js',
'jsx',
'json',
'vue'
],
transform: {
'^.+\\.vue$': 'vue-jest',
'.+\\.(css|styl|less|sass|scss|png|jpg|ttf|woff|woff2)$': 'jest-transform-stub',
'^.+\\.jsx?$': 'babel-jest',
},
transformIgnorePatterns: [
"node_modules/(?!epic-spinners|vue-radial-progress)"
// "node_modules/(?!epic-spinners)",
],
moduleNameMapper: {
'^#/(.*)$': '<rootDir>/src/$1'
},
snapshotSerializers: [
'jest-serializer-vue'
],
testMatch: [
'**/tests/unit/**/*.spec.(js|jsx|ts|tsx)|**/__tests__/*.(js|jsx|ts|tsx)'
],
testURL: 'http://localhost/'
}
In addition to #FrancescoMussi's answer, after editing my jest.config.js, in case you get the error: jest-transform-stub not found, just install it. in my case I didn't had installed jest-transform-stub and jest-serializer-vue. after installing those my tests started working.
npm install --save-dev jest-serializer-vue
https://www.npmjs.com/package/jest-serializer-vue
and
npm install --save-dev jest-transform-stub
https://www.npmjs.com/package/jest-transform-stub
In addition to #FrancescoMussi's solution, if it is still not working for you, make sure your Babel config is in the correct place as per the Jest docs
I had moved my Babel config to package.json which Babel wasn't detecting due to Vue CLI installing Babel 7. Moving Babel config back to babel.config.js resolved the issue for me.
I'm following this tutorial from angular.io
As they said, I've created hero.spec.ts file to create unit tests:
import { Hero } from './hero';
describe('Hero', () => {
it('has name', () => {
let hero: Hero = {id: 1, name: 'Super Cat'};
expect(hero.name).toEqual('Super Cat');
});
it('has id', () => {
let hero: Hero = {id: 1, name: 'Super Cat'};
expect(hero.id).toEqual(1);
});
});
Unit Tests work like a charm. The problem is: I see some errors, which are mentioned in tutorial:
Our editor and the compiler may complain that they don’t know what it
and expect are because they lack the typing files that describe
Jasmine. We can ignore those annoying complaints for now as they are
harmless.
And they indeed ignored it. Even though those errors are harmless, it doesn't look good in my output console when I receive bunch of them.
Example of what I get:
Cannot find name 'describe'.
Cannot find name 'it'.
Cannot find name 'expect'.
What can I do to fix it?
I hope you've installed -
npm install --save-dev #types/jasmine
Then put following import at the top of the hero.spec.ts file -
import 'jasmine';
It should solve the problem.
With Typescript#2.0 or later you can install types with:
npm install -D #types/jasmine
Then import the types automatically using the types option in tsconfig.json:
"types": ["jasmine"],
This solution does not require import {} from 'jasmine'; in each spec file.
npm install #types/jasmine
As mentioned in some comments the "types": ["jasmine"] is not needed anymore, all #types packages are automatically included in compilation (since v2.1 I think).
In my opinion the easiest solution is to exclude the test files in your tsconfig.json like:
"exclude": [
"node_modules",
"**/*.spec.ts"
]
This works for me.
Further information in the official tsconfig docs.
You need to install typings for jasmine. Assuming you are on a relatively recent version of typescript 2 you should be able to do:
npm install --save-dev #types/jasmine
With Typescript#2.0 or later you can install types with npm install
npm install --save-dev #types/jasmine
then import the types automatically using the typeRoots option in tsconfig.json.
"typeRoots": [
"node_modules/#types"
],
This solution does not require import {} from 'jasmine'; in each spec file.
In order for TypeScript Compiler to use all visible Type Definitions during compilation, types option should be removed completely from compilerOptions field in tsconfig.json file.
This problem arises when there exists some types entries in compilerOptions field, where at the same time jest entry is missing.
So in order to fix the problem, compilerOptions field in your tscongfig.json should either include jest in types area or get rid of types comnpletely:
{
"compilerOptions": {
"esModuleInterop": true,
"target": "es6",
"module": "commonjs",
"outDir": "dist",
"types": ["reflect-metadata", "jest"], //<-- add jest or remove completely
"moduleResolution": "node",
"sourceMap": true
},
"include": [
"src/**/*.ts"
],
"exclude": [
"node_modules"
]
}
Solution to this problem is connected with what #Pace has written in his answer. However, it doesn't explain everything so, if you don't mind, I'll write it by myself.
SOLUTION:
Adding this line:
///<reference path="./../../../typings/globals/jasmine/index.d.ts"/>
at the beginning of hero.spec.ts file fixes problem. Path leads to typings folder (where all typings are stored).
To install typings you need to create typings.json file in root of your project with following content:
{
"globalDependencies": {
"core-js": "registry:dt/core-js#0.0.0+20160602141332",
"jasmine": "registry:dt/jasmine#2.2.0+20160621224255",
"node": "registry:dt/node#6.0.0+20160807145350"
}
}
And run typings install (where typings is NPM package).
In my case, the solution was to remove the typeRoots in my tsconfig.json.
As you can read in the TypeScript doc
If typeRoots is specified, only packages under typeRoots will be included.
I'm up to the latest as of today and found the best way to resolve this is to do nothing...no typeRoots no types no exclude no include all the defaults seem to be working just fine. Actually it didn't work right for me until I removed them all. I had:
"exclude": [
"node_modules"
]
but that's in the defaults so I removed that.
I had:
"types": [
"node"
]
to get past some compiler warning. But now I removed that too.
The warning that shouldn't be is:
error TS2304: Cannot find name 'AsyncIterable'.
from node_modules\#types\graphql\subscription\subscribe.d.ts
which is very obnoxious so I did this in tsconfig so that it loads it:
"compilerOptions": {
"target": "esnext",
}
since it's in the esnext set. I'm not using it directly so no worries here about compatibility just yet. Hope that doesn't burn me later.
I'll just add Answer for what works for me in "typescript": "3.2.4" I realized that jasmine in node_modules/#types there is a folder for ts3.1 under the jasmine type so here are the steps:-
Install type jasmine npm install -D #types/jasmine
Add to tsconfig.json jasmine/ts3.1
"typeRoots": [
...
"./node_modules/jasmine/ts3.1"
],
Add Jasmine to the types
"types": [
"jasmine",
"node"
],
Note: No need for this import 'jasmine'; anymore.
Only had to do the following to pick up #types in a Lerna Mono-repo
where several node_modules exist.
npm install -D #types/jasmine
Then in each tsconfig.file of each module or app
"typeRoots": [
"node_modules/#types",
"../../node_modules/#types" <-- I added this line
],
In my case, I was getting this error when I serve the app, not when testing. I didn't realise I had a different configuration setting in my tsconfig.app.json file.
I previously had this:
{
...
"include": [
"src/**/*.ts"
]
}
It was including all my .spec.ts files when serving the app. I changed the include property toexclude` and added a regex to exclude all test files like this:
{
...
"exclude": [
"**/*.spec.ts",
"**/__mocks__"
]
}
Now it works as expected.
I had this error in an angular library. Turns out I accidentally included my .spec file in the exports in my public-api.ts. Removing the export fixed my issue.
Look at the import maybe you have a cycle dependency, this was in my case the error, using import {} from 'jasmine'; will fix the errors in the console and make the code compilable but not removes the root of devil (in my case the cycle dependency).
I'm on Angular 6, Typescript 2.7, and I'm using Jest framework to unit test.
I had #types/jest installed and added on typeRoots inside tsconfig.json
But still have the display error below (i.e: on terminal there is no errors)
cannot find name describe
And adding the import :
import {} from 'jest'; // in my case or jasmine if you're using jasmine
doesn't technically do anything, so I thought, that there is an import somewhere causing this problem, then I found, that if delete the file
tsconfig.spec.json
in the src/ folder, solved the problem for me. As #types is imported before inside the rootTypes.
I recommend you to do same and delete this file, no needed config is inside. (ps: if you're in the same case as I am)
If the error is in the .specs file
app/app.component.spec.ts(7,3): error TS2304: Cannot find name 'beforeEach'.
add this to the top of your file and npm install rxjs
import { range } from 'rxjs';
import { map, filter } from 'rxjs/operators';
Just add to your tsconfig.json, and be sure that you don't have "**/*.spec.ts"
in exclude
"include": [
"src/**/*.spec.ts",
"src/**/*.d.ts"
]
My working tsconfig.json
I found this issues in the official, but it looks like they refused to answer.
So I can only ask questions on SO.
Here is my Error&Warning Log:
WARNING in ./~/aws-sdk/lib/util.js
Critical dependencies:
40:30-45 the request of a dependency is an expression
43:11-53 the request of a dependency is an expression
# ./~/aws-sdk/lib/util.js 40:30-45 43:11-53
WARNING in ./~/aws-sdk/lib ^\.\/.*$
Module not found: Error: Cannot resolve directory '.' in /Users/me/Documents/Sources/my-project/client/node_modules/aws-sdk/lib
# ./~/aws-sdk/lib ^\.\/.*$
WARNING in ./~/aws-sdk/lib/api_loader.js
Critical dependencies:
13:15-59 the request of a dependency is an expression
104:12-46 the request of a dependency is an expression
108:21-58 the request of a dependency is an expression
114:18-52 the request of a dependency is an expression
# ./~/aws-sdk/lib/api_loader.js 13:15-59 104:12-46 108:21-58 114:18-52
WARNING in ./~/aws-sdk/lib/region_config.json
Module parse failed: /Users/me/Documents/Sources/my-project/client/node_modules/aws-sdk/lib/region_config.json Line 2: Unexpected token :
You may need an appropriate loader to handle this file type.
| {
| "rules": {
| "*/*": {
| "endpoint": "{service}.{region}.amazonaws.com"
# ./~/aws-sdk/lib ^\.\/.*$
ERROR in ./~/aws-sdk/lib/api_loader.js
Module not found: Error: Cannot resolve module 'fs' in /Users/me/Documents/Sources/my-project/client/node_modules/aws-sdk/lib
# ./~/aws-sdk/lib/api_loader.js 1:9-22
ERROR in ./~/aws-sdk/lib/services.js
Module not found: Error: Cannot resolve module 'fs' in /Users/me/Documents/Sources/my-project/client/node_modules/aws-sdk/lib
# ./~/aws-sdk/lib/services.js 1:9-22
There are three types:
Cannot resolve module 'fs'
I only need to install fs can solve this.
need an appropriate loader
Well, this will need to install json-loader, and set it in webpack.config.js, but also can solve.
Critical dependencies
Module not found: Error: Cannot resolve directory '.'
I webpack newbie.So, i don't know how to solve this.
Will someone help me? thanks.
UPDATE:
Module not found: Error: Cannot resolve directory '.'
that is my fault, config file's extensions missing a .
I found this blog post that fixed it for me.
Essentially you need to import the built version of the library.
All credit goes to the author. Here is the code:
require('aws-sdk/dist/aws-sdk');
var AWS = window.AWS;
ES6 version:
import 'aws-sdk/dist/aws-sdk';
const AWS = window.AWS;
config:
module: {
noParse: [
/aws/
]
}
usage:
window.AWS to the reference of the global AWS object.
Using the noParse method should work if you are creating a node package, as this is setting webpack to not apply any parsing/loaders. This did not work for me when creating a umd formatted output file/library.
To create a umd formatted library I had to use loaders to Browserify aws-sdk and handle json files.
Install the loaders:
npm install json-loader --save-dev
npm install transform-loader brfs --save-dev
Webpack Config:
module: {
loaders: [
{ test: /aws-sdk/, loaders: ["transform?brfs"]},
{ test: /\.json$/, loaders: ['json']},
]
},
output: {
library: 'LibraryName',
libraryTarget: 'umd'
},
resolve: {
extensions: ['', '.js']
}
Replace LibraryName with you own namespacing. Currently the library would be used through a constructor as follows:
var libObj = new LibraryName();
AWS SDK added support to webpack starting from version 2.6.1, please see Using webpack and the AWS SDK for JavaScript to Create and Bundle an Application – Part 1 blog post describing how to require aws-sdk into webpack bundle.
use npm install json-loader --save-dev
add the following code to webpack.config.js
module: {
loaders: [{
test: /\.js$/,
loaders: ['babel'],
exclude: /node_modules/,
},
{
test: /.json$/,
loaders: ['json']
}]
}
Just import * as AWS from 'aws-sdk'
Notice that we specified a loader to tell webpack how to handle importing JSON files, in this case by using the json-loader we installed earlier. By default, webpack only supports JavaScript, but uses loaders to add support for importing other file types as well. The AWS SDK makes heavy use of JSON files, so without this extra configuration, webpack will throw an error when generating the bundle.
Update(2015-10-20):
aws-sdk fix this. i can use it from npm.
thanks, aws-sdk team.
I'm just getting started with trying to move my infrastructure over to Chef, and I think I must be missing something obvious.
I'm using the chef-rvm cookbook to install RVM, and I'd like it to install Ruby 1.9.3p125 and set that as the default.
Here's my base server role:
name "base"
description "Basic configuration for all nodes"
run_list(
'recipe[git]',
'recipe[sudo]',
'recipe[ubuntu]',
'recipe[rvm]',
'recipe[postgresql::client]'
)
override_attributes(
:authorization => {
:sudo => {
:users => ["ubuntu"],
:passwordless => true
}
},
:rvm => {
:rubies => ["ruby-1.9.3-p125"],
:default_ruby => "ruby-1.9.3-p125",
:global_gems => ['bundler', 'rake']
}
)
This runs without any problems, but if I ssh into the server after it's finished, rvm doesn't list any installed rubies:
ubuntu#test.server:~$ rvm list
rvm rubies
# No rvm rubies installed yet. Try 'rvm help install'.
Is this even the correct way to specify that certain rubies be installed? If not, what is the correct way? If so, what am I doing wrong?
There's nothing wrong with your code. The problem lies in the fact that you never told Chef to install the Rubies that you defined in your role.
You have included recipe[rvm] in the role's run_list, which translates to recipe[rvm::default]. Looking into the cookbook's documentation, you find that this recipe:
Installs the RVM gem and initializes Chef to use the Lightweight Resources and Providers (LWRPs). Use this recipe explicitly if you only want access to the LWRPs provided.
What you want can be best achieved by substituting recipe[rvm] for recipe[rvm::system] in the run_list:
Installs the RVM codebase system-wide (that is, into /usr/local/rvm) and installs Rubies, global gems, and specific gems driven off attribute metadata. This recipe includes default and system _ install.
Use this recipe by itself if you want RVM system-wide with Rubies installed, etc.