How do I use regex to convert
11111aA$xx1111xxdj$%%`
to
aA$xx1111xxdj$%%
So, in other words, I want to remove (or match) the FIRST grouping of 1's.
Depending on the language, you should have a way to replace a string by regex. In Java, you can do it like this:
String s = "11111aA$xx1111xxdj$%%";
String res = s.replaceAll("^1+", "");
The ^ "anchor" indicates that the beginning of the input must be matched. The 1+ means a sequence of one or more 1 characters.
Here is a link to ideone with this running program.
The same program in C#:
var rx = new Regex("^1+");
var s = "11111aA$xx1111xxdj$%%";
var res = rx.Replace(s, "");
Console.WriteLine(res);
(link to ideone)
In general, if you would like to make a match of anything only at the beginning of a string, add a ^ prefix to your expression; similarly, adding a $ at the end makes the match accept only strings at the end of your input.
If this is the beginning, you can use this:
^[1]*
As far as replacing, it depends on the language. In powershell, I would do this:
[regex]::Replace("11111aA$xx1111xxdj$%%","^[1]*","")
This will return:
aA$xx1111xxdj$%%
If you only want to replace consecutive "1"s at the beginning of the string, replace the following with an empty string:
^1+
If the consecutive "1"s won't necessarily be the first characters in the string (but you still only want to replace one group), replace the following with the contents of the first capture group (usually \1 or $1):
1+(.*)
Note that this is only necessary if you only have a "replace all" capability available to you, but most regex implementations also provide a way to replace only one instance of a match, in which case you could just replace 1+ with an empty string.
I'm not sure but you can try this
[^1](\w*\d*\W)* - match all as a single group except starting "1"(n) symbols
In Javascript
var str = '11111aA$xx1111xxdj$%%';
var patt = /^1+/g;
str = str.replace(patt,"");
Related
EDIT: This question pertains to Oracle implementation of regex (POSIX ERE) which does not support 'lookaheads'
I need to separate a string of characters with a comma, however, the pattern is not consistent and I am not sure if this can be accomplished with Regex.
Corpus: 1710ABCD.131711ABCD.431711ABCD.41711ABCD.4041711ABCD.25
The pattern is basically 4 digits, followed by 4 characters, followed by a dot, followed by 1,2, or 3 digits! To make the string above clear, this is how it looks like separated by a space 1710ABCD.13 1711ABCD.43 1711ABCD.4 1711ABCD.404 1711ABCD.25
So the output of a replace operation should look like this:
1710ABCD.13,1711ABCD.43,1711ABCD.4,1711ABCD.404,1711ABCD.25
I was able to match the pattern using this regex:
(\d{4}\w{4}\.\d{1,3})
It does insert a comma but after the third digit beyond the dot (wrong, should have been after the second digit), but I cannot get it to do it in the right position and globally.
Here is a link to a fiddle
https://regex101.com/r/qQ2dE4/329
All you need is a lookahead at the end of the regular expression, so that the greedy \d{1,3} backtracks until it's followed by 4 digits (indicating the start of the next substring):
(\d{4}\w{4}\.\d{1,3})(?=\d{4})
^^^^^^^^^
https://regex101.com/r/qQ2dE4/330
To expand on #CertainPerformance's answer, if you want to be able to match the last token, you can use an alternative match of $:
(\d{4}\w{4}\.\d{1,3})(?=\d{4}|$)
Demo: https://regex101.com/r/qQ2dE4/331
EDIT: Since you now mentioned in the comment that you're using Oracle's implementation, you can simply do:
regexp_replace(corpus, '(\d{1,3})(\d{4})', '\1,\2')
to get your desired output:
1710ABCD.13,1711ABCD.43,1711ABCD.4,1711ABCD.404,1711ABCD.25
Demo: https://regex101.com/r/qQ2dE4/333
In order to continue finding matches after the first one you must use the global flag /g. The pattern is very tricky but it's feasible if you reverse the string.
Demo
var str = `1710ABCD.131711ABCD.431711ABCD.41711ABCD.4041711ABCD.25`;
// Reverse String
var rts = str.split("").reverse().join("");
// Do a reverse version of RegEx
/*In order to continue searching after the first match,
use the `g`lobal flag*/
var rgx = /(\d{1,3}\.\w{4}\d{4})/g;
// Replace on reversed String with a reversed substitution
var res = rts.replace(rgx, ` ,$1`);
// Revert the result back to normal direction
var ser = res.split("").reverse().join("");
console.log(ser);
Given string:
some_function(inputId = "select_something"),
(...)
some_other_function(inputId = "some_other_label")
I would like to arrive at:
some_function(inputId = ns("select_something")),
(...)
some_other_function(inputId = ns("some_other_label"))
The key change here is the element ns( ... ) that surrounds the string available in the "" after the inputId
Regex
So far, I have came up with this regex:
:%substitute/\(inputId\s=\s\)\(\"[a-zA-Z]"\)/\1ns(/2/cgI
However, when deployed, it produces an error:
E488: Trailing characters
A simpler version of that regex works, the syntax:
:%substitute/\(inputId\s=\s\)/\1ns(/cgI
would correctly inser ns( after finding inputId = and create string
some_other_function(inputId = ns("some_other_label")
Challenge
I'm struggling to match the remaining part of the string, ex. "select_something") and return it as:
"select_something")).
You have many problems with your regex.
[a-zA-Z] will only match one letter. Presumably you want to match everything up to the next ", so you'll need a \+ and you'll also need to match underscores too. I would recommend \w\+. Unless more than [a-zA-Z_] might be in the string, in which case I would do .\{-}.
You have a /2 instead of \2. This is why you're getting E488.
I would do this:
:%s/\(inputId = \)\(".\{-}\)"/\1ns(\2)/cgI
Or use the start match atom: (that is, \zs)
:%s/inputId = \zs\".\{-}"/ns(&)/cgI
You can use a negated character class "[^"]*" to match a quoted string:
%s/\(inputId\s*=\s*\)\("[^"]*"\)/\1ns(\2)/g
For a project of mine, I want to create 'blocks' with Regex.
\xyz\yzx //wrong format
x\12 //wrong format
12\x //wrong format
\x12\x13\x14\x00\xff\xff //correct format
When using Regex101 to test my regular expressions, I came to this result:
([\\x(0-9A-Fa-f)])/gm
This leads to an incorrect output, because
12\x
Still gets detected as a correct string, though the order is wrong, it needs to be in the order specified below, and in no other order.
backslash x 0-9A-Fa-f 0-9A-Fa-f
Can anyone explain how that works and why it works in that way? Thanks in advance!
To match the \, folloed with x, followed with 2 hex chars, anywhere in the string, you need to use
\\x[0-9A-Fa-f]{2}
See the regex demo
To force it match all non-overlapping occurrences, use the specific modifiers (like /g in JavaScript/Perl) or specific functions in your programming language (Regex.Matches in .NET, or preg_match_all in PHP, etc.).
The ^(?:\\x[0-9A-Fa-f]{2})+$ regex validates a whole string that consists of the patterns like above. It happens due to the ^ (start of string) and $ (end of string) anchors. Note the (?:...)+ is a non-capturing group that can repeat in the string 1 or more times (due to + quantifier).
Some Java demo:
String s = "\\x12\\x13\\x14\\x00\\xff\\xff";
// Extract valid blocks
Pattern pattern = Pattern.compile("\\\\x[0-9A-Fa-f]{2}");
Matcher matcher = pattern.matcher(s);
List<String> res = new ArrayList<>();
while (matcher.find()){
res.add(matcher.group(0));
}
System.out.println(res); // => [\x12, \x13, \x14, \x00, \xff, \xff]
// Check if a string consists of valid "blocks" only
boolean isValid = s.matches("(?i)(?:\\\\x[a-f0-9]{2})+");
System.out.println(isValid); // => true
Note that we may shorten [a-zA-Z] to [a-z] if we add a case insensitive modifier (?i) to the start of the pattern, or just use \p{Alnum} that matches any alphanumeric char in a Java regex.
The String#matches method always anchors the regex by default, we do not need the leading ^ and trailing $ anchors when using the pattern inside it.
I know I can exclude outside characters in a string using look-ahead and look-behind, but I'm not sure about characters in the center.
What I want is to get a match of ABCDEF from the string ABC 123 DEF.
Is this possible with a Regex string? If not, can it be accomplished another way?
EDIT
For more clarification, in the example above I can use the regex string /ABC.*?DEF/ to sort of get what I want, but this includes everything matched by .*?. What I want is to match with something like ABC(match whatever, but then throw it out)DEF resulting in one single match of ABCDEF.
As another example, I can do the following (in sudo-code and regex):
string myStr = "ABC 123 DEF";
string tempMatch = RegexMatch(myStr, "(?<=ABC).*?(?=DEF)"); //Returns " 123 "
string FinalString = myStr.Replace(tempMatch, ""); //Returns "ABCDEF". This is what I want
Again, is there a way to do this with a single regex string?
Since the regex replace feature in most languages does not change the string it operates on (but produces a new one), you can do it as a one-liner in most languages. Firstly, you match everything, capturing the desired parts:
^.*(ABC).*(DEF).*$
(Make sure to use the single-line/"dotall" option if your input contains line breaks!)
And then you replace this with:
$1$2
That will give you ABCDEF in one assignment.
Still, as outlined in the comments and in Mark's answer, the engine does match the stuff in between ABC and DEF. It's only the replacement convenience function that throws it out. But that is supported in pretty much every language, I would say.
Important: this approach will of course only work if your input string contains the desired pattern only once (assuming ABC and DEF are actually variable).
Example implementation in PHP:
$output = preg_replace('/^.*(ABC).*(DEF).*$/s', '$1$2', $input);
Or JavaScript (which does not have single-line mode):
var output = input.replace(/^[\s\S]*(ABC)[\s\S]*(DEF)[\s\S]*$/, '$1$2');
Or C#:
string output = Regex.Replace(input, #"^.*(ABC).*(DEF).*$", "$1$2", RegexOptions.Singleline);
A regular expression can contain multiple capturing groups. Each group must consist of consecutive characters so it's not possible to have a single group that captures what you want, but the groups themselves do not have to be contiguous so you can combine multiple groups to get your desired result.
Regular expression
(ABC).*(DEF)
Captures
ABC
DEF
See it online: rubular
Example C# code
string myStr = "ABC 123 DEF";
Match m = Regex.Match(myStr, "(ABC).*(DEF)");
if (m.Success)
{
string result = m.Groups[1].Value + m.Groups[2].Value; // Gives "ABCDEF"
// ...
}
I am attempting to parse a string like the following using a .NET regular expression:
H3Y5NC8E-TGA5B6SB-2NVAQ4E0
and return the following using Split:
H3Y5NC8E
TGA5B6SB
2NVAQ4E0
I validate each character against a specific character set (note that the letters 'I', 'O', 'U' & 'W' are absent), so using string.Split is not an option. The number of characters in each group can vary and the number of groups can also vary. I am using the following expression:
([ABCDEFGHJKLMNPQRSTVXYZ0123456789]{8}-?){3}
This will match exactly 3 groups of 8 characters each. Any more or less will fail the match.
This works insofar as it correctly matches the input. However, when I use the Split method to extract each character group, I just get the final group. RegexBuddy complains that I have repeated the capturing group itself and that I should put a capture group around the repeated group. However, none of my attempts to do this achieve the desired result. I have been trying expressions like this:
(([ABCDEFGHJKLMNPQRSTVXYZ0123456789]{8})-?){4}
But this does not work.
Since I generate the regex in code, I could just expand it out by the number of groups, but I was hoping for a more elegant solution.
Please note that the character set does not include the entire alphabet. It is part of a product activation system. As such, any characters that can be accidentally interpreted as numbers or other characters are removed. e.g. The letters 'I', 'O', 'U' & 'W' are not in the character set.
The hyphens are optional since a user does not need top type them in, but they can be there if the user as done a copy & paste.
BTW, you can replace [ABCDEFGHJKLMNPQRSTVXYZ0123456789] character class with a more readable subtracted character class.
[[A-Z\d]-[IOUW]]
If you just want to match 3 groups like that, why don't you use this pattern 3 times in your regex and just use captured 1, 2, 3 subgroups to form the new string?
([[A-Z\d]-[IOUW]]){8}-([[A-Z\d]-[IOUW]]){8}-([[A-Z\d]-[IOUW]]){8}
In PHP I would return (I don't know .NET)
return "$1 $2 $3";
I have discovered the answer I was after. Here is my working code:
static void Main(string[] args)
{
string pattern = #"^\s*((?<group>[ABCDEFGHJKLMNPQRSTVXYZ0123456789]{8})-?){3}\s*$";
string input = "H3Y5NC8E-TGA5B6SB-2NVAQ4E0";
Regex re = new Regex(pattern);
Match m = re.Match(input);
if (m.Success)
foreach (Capture c in m.Groups["group"].Captures)
Console.WriteLine(c.Value);
}
After reviewing your question and the answers given, I came up with this:
RegexOptions options = RegexOptions.None;
Regex regex = new Regex(#"([ABCDEFGHJKLMNPQRSTVXYZ0123456789]{8})", options);
string input = #"H3Y5NC8E-TGA5B6SB-2NVAQ4E0";
MatchCollection matches = regex.Matches(input);
for (int i = 0; i != matches.Count; ++i)
{
string match = matches[i].Value;
}
Since the "-" is optional, you don't need to include it. I am not sure what you was using the {4} at the end for? This will find the matches based on what you want, then using the MatchCollection you can access each match to rebuild the string.
Why use Regex? If the groups are always split by a -, can't you use Split()?
Sorry if this isn't what you intended, but your string always has the hyphen separating the groups then instead of using regex couldn't you use the String.Split() method?
Dim stringArray As Array = someString.Split("-")
What are the defining characteristics of a valid block? We'd need to know that in order to really be helpful.
My generic suggestion, validate the charset in a first step, then split and parse in a seperate method based on what you expect. If this is in a web site/app then you can use the ASP Regex validation on the front end then break it up on the back end.
If you're just checking the value of the group, with group(i).value, then you will only get the last one. However, if you want to enumerate over all the times that group was captured, use group(2).captures(i).value, as shown below.
system.text.RegularExpressions.Regex.Match("H3Y5NC8E-TGA5B6SB-2NVAQ4E0","(([ABCDEFGHJKLMNPQRSTVXYZ0123456789]+)-?)*").Groups(2).Captures(i).Value
Mike,
You can use character set of your choice inside character group. All you need is to add "+" modifier to capture all groups. See my previous answer, just change [A-Z0-9] to whatever you need (i.e. [ABCDEFGHJKLMNPQRSTVXYZ0123456789])
You can use this pattern:
Regex.Split("H3Y5NC8E-TGA5B6SB-2NVAQ4E0", "([ABCDEFGHJKLMNPQRSTVXYZ0123456789]{8}+)-?")
But you will need to filter out empty strings from resulting array.
Citation from MSDN:
If multiple matches are adjacent to one another, an empty string is inserted into the array.