Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 8 years ago.
Improve this question
I am trying to connect to a networked machine's FileZilla server but my FileZilla Client is giving the following error while connecting. The error is:
"Connection attempt failed with ECONNREFUSED - Connection refused by server"
Windows Firewall is turned off on that machine and i had provided the valid credentials in my FTP Client.
Thanks in advance
FTP protocol may be blocked by your ISP firewall, try connecting via SFTP (i.e. use 22 for port num instead of 21 which is simply FTP).
For more information try this link.
Use port number 22 (for sftp) instead of 21 (normal ftp). Solved this problem for me.
I solved this error
A connection attempt failed with "ECONNREFUSED - Connection refused by server"
by changing my port to 22 that was successful
For me, I was receiving this error when connecting to the new IP Address I had configured FileZilla to bind to and saved the configuration. After trying all of the other answers unsuccessfully, I decided to connect to the old IP Address to see what came up; lo and behold it responded.
I restarted the FileZilla Windows Service and it immediately came back listening on the correct IP. Pretty elementary, but it cost me some time today as a noob to FZ.
Hopefully this helps someone out in the same predicament.
Related
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 2 years ago.
Improve this question
Ubuntu 20.04
LSWS 5.4.8
QUIC is working in WebAdmin, but don't work at any Virtual hosts. How can I enable that thing in virtual host on subdomain. UDP ports are opened, Firewall is disabled.
Commands outputs:
443 udp listening,
ufw status
Any ideas?
QUIC settings
Default QUIC setting is enabled, you really no need to set anything on LSWS for it.
Firewall
To me, that nc -vu command is not enough to verify UDP 443 port unless it will return some information back. I would recommend verify it with tcpdump, e.g.
Run tcpdump on the website's server.
tcpdump -vv udp port 443 -X
Run nc command from any client server.
nc -vu YOUR_DOMAIN 443
and you should see some output on server if there's any UDP port 443 traffic in and out.
Trust Certificate
You will need to setup HTTPS with trusted certificate. Here we can use openssl command to do a quick verify
openssl s_client -connect YOUR_DOMAIN:443
Check if the Verify return code is 0.
If above methods all shows good, please share the output result and site URL so we can check more.
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 3 years ago.
Improve this question
I tried to log in to my aws ec2 instance with putty. Every time I connect to my school wifi it keeps saying connection Time Out. But when I try to connect with my phone network it's working fine again.
I already set the security inbound rules to everyone, only myIP. but still not working.
Here is the error... "Network error!!!Connection Time Out"
Your School wifi must be operating behind a firewall and traffic is filtered. For example - in most companies only few sites are allowed to browse and rest all are blocked by firewall rules.
Port 22 is blocked in most of public networks. You can try connecting putty after connecting from your mobile network.
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 5 years ago.
Improve this question
Here I am exploring the security features, and when I enter "firewall-cmd --panic-on" to the CLI, the system just hangs idle.
Centos 7
Kernel 3.10
I think this is not supposed to happen, b/c as I read the documentation, I see I should be able to firewall-cmd --panic-off, but I cannot even ssh through another terminal unless I restart the server.
Is the system corrupt?
Is there a bug with "firewall-cmd --panic-on"?
How can I figure out the source of the problem?
--panic-on
Enable panic mode. All incoming and outgoing packets are dropped, active connections will expire. Enable this only if there are
serious problems with your network environment. For example if the
machine is getting hacked in.
As this switch drops all incoming connections and kills established active connections, so you can not issue --panic-off using ssh. You have to run firewall-cmd --panic-off using console access. running firewall-cmd --panic-on will apply configuration in runtime level so by simply restarting the server you can access ssh session. never run firewall-cmd --panic-on --permanent you can verify panic status by running firewall-cmd --query-panic
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 7 years ago.
Improve this question
When i connect with my server using filezilla at that time FTP shows me this error :
550 Can't change directory to ..: Permission denied
Error: Failed to retrieve directory listing
Response: 421 Timeout - try typing a little faster next time
Error: GnuTLS error -110 in gnutls_record_recv: The TLS connection was non-properly terminated.
Status: Server did not properly shut down TLS connection
Error: Could not read from socket: ECONNABORTED - Connection aborted
Error: Disconnected from server
Can anyone tell me about this error?
Once i got same error like this.
This seems like you have a problem with the server provider.
so don't do anything just directly call to Server provider and tell them your issue about filezilla.
They will shortout in couple of hours or may be in days.
Closed. This question needs debugging details. It is not currently accepting answers.
Edit the question to include desired behavior, a specific problem or error, and the shortest code necessary to reproduce the problem. This will help others answer the question.
Closed 5 years ago.
Improve this question
I have the vmware server with this error, anyone knows how to fix it?VMware Server Error http://soporte.cardinalsystems.com.ar/errorvmwareserver.jpg
In the Network Connections on the host PC, you might try repairing the connections that are created by VMWare. Something like "VMWare Network Adapter VMnet1"
I'm assuming that the network connections (to a LAN/Internet) are working on the host computer. If not, I'd start by fixing the host first.
There should be a vmware.log file or something similar in the directory that contains your vm. After you start the vm, are there any new errors in it?
Also, is the network adapter enabled?
No Idea what I do, but now its working.
this is all I have done:
reinstall Vmware server several times ( more than 4 )
Fix network adapter
prey ( more than 1000 times)
UPDATE: One of the three VM does not work the other works perfect.