I am using MinGW GCC + Eclipse on Windows, and I have run into this error:
C:\Program Files\ITG Derivatives LLC\api_clear-2.0.2.48\include/windows/csassert.h:12:20: fatal error crtdbg.h No such file or directory
What is the crtdbg.h file? How can I get it and solve this problem?
I ran into this exact same issue, but with Visual Studio Community Edition 2019.
The solution was to download the Windows 10 SDK using the Visual Studio installer. Once I did that the next compile worked fine.
The header file "crtdbg.h" is part of the Windows 10 SDK kit. I believe you will find crtdbg.h located here C:\Program Files... or C:\Program Files (x86)\Windows Kits\10\Include\10.0.19041.0\ucrt\crtdbg.h depending on your setup and version.
<crtdbg.h> is a Microsoft Visual C++ specific header. You may be able to work around this problem using a stub similar to the following:
#ifdef _MSC_VER
#include <crtdbg.h>
#else
#define _ASSERT(expr) ((void)0)
#define _ASSERTE(expr) ((void)0)
#endif
Note that this will disable any asserts in the code you are compiling against, and still won't help you if the code you're compiling uses more advanced features inside crtdbg.h, such as memory leak detection. If these features are in use, you will need to compile the code with MSVC++ rather than MinGW.
I ran into this exact same issue, but with Visual Studio Code.
First start/restart VS Installer and install the Win10 SDK.
Then restart your computer and the needed heasers are available.
I am from Go--g-- search here.
After installing Visual Studio 2019 preview(2022 preview), I have faced the same.
Opening Developer Command Prompt and after going to a particular folder,
cl test.cpp gave above error.
Resolve :
After installing Visual Studio 2022 preview or any other version, do reboot the system.
After rebooting, I could successfully, run the cl command, and compiled a test program without any of the above error.
I ran into this problem recently by trying to install LLVM/Visual Studio Code.
The Windows SDK installation is required for the clang compiler.
To install the Windwos SDK open/download the Visual Studio Installer and check the Windows 10 SDK in Desktop in development with C++
If you have the Windows SDK, and still have this error, go to project propreties -> VC++ -> Include Directories. then paste C:\Program Files (x86)\Windows Kits\10\Include(Version)\ucrt
Just note that I got the same error in Visual Studio 2022 installed on Win 10 Version 21H2. Solution was to install latest Windows 10 SDK from here and then restart the computer.
I ran into this problem, I tried updating the SDK through Visual Studio as mentioned above to no avail. One thing I did was used an old PC to download the SDK, transferred the contents via USB. Took the File directory that Visual Studio was looking in, and copied everything over from the downloaded SDK in the USB to that file path/directory as mentioned in Visual Studio.
Hope this helps.
Related
Just installed visual studio 2019 on windows 10, was using visual studio for the first time and ran into the following error, It's a basic hello world console program that I tried to run.
error C1083: Cannot open include file: 'corecrt.h': No such file or directory
1>Done building project "ConsoleApplication2.vcxproj" -- FAILED.
Severity Code Description Project File Line Suppression State
Warning MSB8003 The WindowsSDKDir property is not defined. Some build tools may not be found. ConsoleApplication2 C:\Program Files (x86)\Microsoft Visual Studio\2019\Community\MSBuild\Microsoft\VC\v160\Microsoft.CppBuild.targets 434
I tried searching for this error over YouTube and of course here, and also Microsoft's offical forum but couldn't find anything.
#include <iostream>
using namespace std;
int main()
{
cout << "Hello World!\n";
}
the code looks just fine.
I ran into the same issue today. It turns out I didn't check the Win10SDK to save disk space while installation.
Solution:
In VS, go Tools menu=>Get Tools and Features=>install the Windows 10 SDK(10.XX.XX.XX)
Once installed, launch VS and open your project, right-click your project(NOT Solution)->properties->General->Windows SDK Version, check the value should be 10.0 instead of blank.
Then the compiling just worked.
I've got the same issue and turned out that I haven't installed Windows SDK. It can be done by typing "Install Windows SDK" into visual studio's search prompt
I had same problem when I installed Visual Studio 2019 on Windows7 and opened project created in Visual Studio 2017 (witch wasn't installed on that machine).
To solve the problem I went to project Properties -> General -> Windows SDK Version
And changed it from 10 to 8.1.
I fixed this issue by repairing Windows SDK. Now it's working as expected.
Steps:
Go to Settings>Apps & Features.
Click on Windows Software Development Kit - Windows 10.0.18362.1
(Note: Version number might be different for you)
Click on Modify.
Select Repair from options.
Click Next.
Restart VS and try running your project.
I was just having thesame issue so I figured maybe the headers were in a different directory than where the program is searching. When I went looking for tge header files none existed. So the problem is probably with iostream not existing.
I'm trying to install CUDA, but I get a message saying "No supported version of visual studio was found". I think that this is because I am using Visual Studio 2017 (Community), and CUDA currently only supports up to Visual Studio 2015. Unfortunately, Microsoft will not allow me to download old versions of Visual Studio without paying a subscription fee.
Is there a way I can get around the compatibility issue with VS 2017, or can I not use CUDA?
If you want to install CUDA 8.0 with Visual Studio 2017 you need to install additional components for Visual Studio 2017.Click on the Start Menu and type Visual Studio Installer. Open Visual Studio InstallerOpen Individual components tab and select VC++ 2015.3 v140 toolset
under Compilers, build tools and runtimes.
You also need to install .NET Framework 3.5 if you didn't have it installed. Nvda.Build.CudaTasks.v8.0.dll assembly dependents on MS .NET Framework 3.5.
Open Classical Control Panel, go to Programs and features and press Turn Windows features on or off. Check .NET Framework 3.5 and press OK.
Download full CUDA toolkit distribution and extract it somewhere on your disk.
If you didn't have CUDA toolkit installed, do it now. If you have only Visual Studio 2017 installed, unselect Visual Studio integration checkbox.
Now you want to receive the "No supported version of the visual studio was found" error.
But in order to successfully build Cuda toolkit projects in Visual Studio 2017, you also need to follow steps 5 and 6.
Go to the CUDAVisualStudioIntegration\extras\visual_studio_integration\MSBuildExtensions folder in your extracted distribution, copy all the files and paste them to C:\Program Files (x86)\MSBuild\Microsoft.Cpp\v4.0\v140\BuildCustomizations:
In the last step, you will need to edit your Cuda projects to recognize NVidia's build tasks from Visual Studio 2017. Open your .vcxproj file in a text editor and find all occurrences of CUDA 8.0.props. Replace the macro at the beginning of the string with $(VCTargetsPath14) so that XML snippet would look as follows:
<ImportGroup Label="ExtensionSettings">
<Import Project="$(VCTargetsPath14)\BuildCustomizations\CUDA 8.0.props" /></ImportGroup>
Don't forget to edit the custom targets path at the end of the file:
<ImportGroup Label="ExtensionTargets">
<Import Project="$(VCTargetsPath14)\BuildCustomizations\CUDA 8.0.targets" /></ImportGroup>
Make sure to double check your path conifuration!
If you use nvcc from command prompt you might not be calling cl.exe from Visual Studio folder!
Now you can build your Cuda project from Visual Studio 2017.
Parts of this solution are from Oleg Tarasov blog.
At the moment, Microsoft still seems to be making VS2015 Update 2 community edition available. You have to join the "dev essentials" program, but it seems to be free.
I was able to download the installer from here recently.
Update: CUDA 9 RC was made available yesterday at developer.nvidia.com to registered developers, and it has support for VS 2017.
Thank you everyone for your help. I just wanted to supplement this post with the last pieces of the puzzle. CUDA v9.0 RC is looking for VS2017 to identify as 1910 but the latest update actually identifies as 1911. To fix open .../CUDA/v9.0/include/crt/host_config.h and change this line:
#if _MSC_VER < 1600 || _MSC_VER > 1910
to this:
#if _MSC_VER < 1600 || _MSC_VER > 1911
You may also have to add the following to your CMakeLists:
list(APPEND CUDA_NVCC_FLAGS --cl-version=2017)
For people seeing this latter.
First, try to just install CUDA 10 (CUDA Toolkit 10.0).
If it still doesn't work without any mods make sure that you have as many VC++ toolsets as you see on the list. Check out this video, stop at 8:41 and compare the lists.
If for some reason you have to use CUDA 9.0 - 9.2 you will need to jump some hoops:
For cmd builds set vcvars_ver=14.11 - see this answer
For IDE builds set Platform Toolset (in project properties - General) to
Visual Studio 2017 (v141)) or
Visual Studio 2015 (v140))
If you have very customized cmd based build, hunt #if _MSC_VER (in .../CUDA/.../include/crt/host_config.h) and remove trailing || _MSC_VER > ...
In order to get working Cuda compiler nvcc in windows shell you need to do following
install proper toolset version from individual component for VS 2017 - VC++ 2017 version 15.4 v.14.11 toolset
Run in windows shell following "c:\Program Files (x86)\Microsoft Visual Studio\2017\Community\VC\Auxiliary\Build\vcvarsall.bat" x64 -vcvars_ver=14.11
You can compile nvcc code without errors from windows shell
I ran into the same issue using CUDA 9.1 and VS2017 Enterprise.
After changing the VC++ compiler to v140 (instead of 141) everything runs fine.
Already had flags
#if _MSC_VER < 1600 || _MSC_VER > 1911
But it wouldn't stop showing the error.
No idea why, but trying to run it on VS2015 lead to errors about v141 not being installed... so because of some twisted logic I tried to not use v141 where it was installed... and everything worked!!
Leaving this here as it may help someone else in the same situation. (although I really don't understand the why, how, when, who or what of the solution.
Latest update (correct as of 06/12/2018) latest Cuda version is 9.2 and latest Visual Studio version is 2017.7 do NOT work together. The instructions provided in solution above don't work. Here is what worked for me:
Uninstall Visual Studio.
Uninstall Visual Studio Installer
Download Visual Studio 2017.6 (note that Microsoft is known to change links and revisions without notice) https://learn.microsoft.com/en-us/visualstudio/productinfo/installing-an-earlier-release-of-vs2017
Launch installer
Go to Individual Components. Click on Windows 10 SDK 10.0.15063
enter image description here
Download cuda Toolkit from the official website: https://developer.nvidia.com/cuda-downloads?target_os=Windows&target_arch=x86_64&target_version=10&target_type=exelocal
You may need to download patch.
I wanted to edit my CUDA programs using a text editor (i.e. Sublime) and compile them from the command prompt but I ran into an nvcc compiler error. I installed Visual Studio 2017 with Windows 10 OS but after compiling, it said "only version of VS 2012, 13, 15 and 17 are allowed." So what I did was to intall VC++ 2015 toolkit from the installation package of the VS 2017 installer (refer to the image of the top post). I didnt go through his entire process instead, I only copied the path of my cl.exe file from the newly created VS 14.0 folder to the environment variable. The .exe can be found here:
C:\Program Files (x86)\Microsoft Visual Studio 14.0\VC\bin
Hope this helps!
Just as update. My compatibility is:
Cuda version 11.2
Visual Studio Community 2019
I'm going to use the HelixToolkit.SharpDX with VS2017 in my Windows 10 workstation, when I attempt to build the solution, it will prompt the Assertion Failed error with "No fxc.exe found".
I have checked the installation option, Windows SDK has been included, nand I have downloaded and install again, and I can see the fxc.exe in "C:\Program Files (x86)\Windows Kits\10\bin\10.0.16299.0\x64" & "C:\Program Files (x86)\Windows Kits\10\bin\10.0.16299.0\x86" folders, so it should be available for any windows version, but unfortunately, the same error reported.
However, I have also installed VS2017 in another Windows 7 machine, it works fine, and it has the fxc.exe in the same folder as my Windows 10 workstation, but it can be located by VS2017.
Is there any setting in VS2017 to locate the fxc.exe?
Or how can I fix this issue?
Copy fxc.exe in Bin\10.0.xxx\x86 to Bin\x86 to fix this issue. Because the HLSL compile tool hard coded the path.
One can find solution on helix toolkit github page.
Visual Studio 2017. Windows 10 SDK.
Missing fxc.exe issue with newest Windows 10 SDK:
Copy fxc.exe in C:\Program Files (x86)\Windows
Kits\10\Bin\10.0.xxx\x86 to C:\Program Files (x86)\Windows
Kits\10\bin\x86 to fix this issue. Because the HLSL compile tool hard
coded the path.
This seems to have been fixed in Visual Studio 2019 16.0.2, as of writing. Just have to make sure $(WindowsSDK_ExecutablePath) is pointing to the correct SDK directory and the build version that matches with the Targeted Platform in the Project Properties page.
https://social.msdn.microsoft.com/Forums/windowsdesktop/en-US/a3032567-d8e7-4b01-81b7-0612047a6299/why-do-we-need-to-copypaste-fxcexe-from-bin100xxxxx0x86-to-binx86-directory-in-the?forum=windowssdk
Second post answered:
The executables that the C++ build process uses from the Windows SDK directory are MIDL.exe, MT.exe and RC.exe. If you digitally sign your executables then you will find signtool.exe here too. So I am kind of surprised that it finds some critical build tools correctly but others it fails to find.
My suggestion would be:
1) Verify that you are having this problem with your project in Visual Studio 2019 16.0.2 (the latest version at the time of writing) or Visual Studio 2019 Preview (16.1 Preview 1 at the time of writing). This is to check that if this has been found to be a bug, then it could have been fixed.
2) Create a completely new project. Without touching the project's executable path, try to create a sample that shows this behaviour. It doesn't need to be a full sample, just complete enough to show that Visual Studio fails to find fxc.exe.
3) If doing all of this shows that Visual Studio fails to find fxc.exe, then through Visual Studio 2019, report it as a bug.
But I will mention that a naïve test on my end shows that Visual Studio 2019 can compile HLSL shaders without any issues using the 18362, 17763 and 17134 SDKs. These were tested because these are the versions that I have installed.
I have a fresh Windows 8.1 Pro x64 install with a fresh Visual Studio 2013 Pro.
When trying to compile a project with Platform Toolset to Windows7.1SDK I'm getting
Error 1 error MSB6006: "CL.exe" exited with code -1073741515. C:\Program Files (x86)\MSBuild\Microsoft.Cpp\v4.0\Platforms\Win32\Microsoft.Cpp.Win32.targets 57 5 MenuBrowser
I tried running the supplied "Windows SDK Configuration Tool" and besides getting an error about Visual Studio 2005 and 2008 not being installed I think it did its job.
I tried manually editing the registry:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SDKs\Windows
where I manually put CurrentInstallFolder as C:\Program Files\Microsoft SDKs\Windows\v7.1\ and CurrentVersion as 7.1.7600.0.30514. If I look at the project properties and click the different paths / variables in there -> more -> Macros, I can see that $(WindowsSdkDir) is correct.
Any idea as to what I should try? Never ran into this problem on the old development computer with Windows 7 and VS 2012.
L.E. as a note, if I try a new project with the v120 tools, it works, but I need the Windows7.1SDK tools.
When trying to compile a project with Platform Toolset to Windows7.1SDK...
That's not a valid selection in a "fresh" install for VS2013. Not very clear what you've been doing, it certainly isn't "fresh" anymore. Do treat Regedit.exe as a loaded weapon, the registry key set that configures VS has been getting pretty doggone convoluted as of late.
The compiler crashes with -1073741515 == 0xC0000135 == STATUS_DLL_NOT_FOUND. That's a pretty serious mishap of course, it should never occur when you target SDK 7.1 since that still uses the same compiler, only the SDK directory is changed. The compiler itself, as well as the DLLs it uses, are not part of the SDK and only are provided if the machine doesn't have VS installed. You can use SysInternals' Process Monitor to diagnose this, you'll see the CL.EXE process searching for a DLL and not finding it.
The correct way to target 7.1 is to use the v120_xp toolset selection. That builds programs that can still run on XP, it automatically also selects the 7.1A SDK that was installed on your machine. Do try to undo the changes you've made.
Referencing Yodans solution from
How to build with v90 platform toolset in VS2012 without VS2008, using Windows SDK?:
As pointed out by Hans Passant cl.exe looks for mspdb100.dll (among others) and does not find them.
The needed files are in the directory mentioned in 7. below:
My working setup:
VS2013 needs to use VS2010 libs
Using WinSDK 7.1 build tools (v100) in VS2013
clean install, uninstalling everything mentioned in the sdk release notes (can be downloaded at http://www.microsoft.com/en-us/download/details.aspx?id=8279 under category Details)
Microsoft Windows SDK for Windows 7 (7.1) (the Windows SDK core-component files)
Application Verifier
Debugging Tools for Windows
Windows Performance Toolkit
Microsoft Help Viewer 1.0
Microsoft Visual C++ 2010 Redistributable
Microsoft Visual C++ 2010 Standard Edition
Additionally removed all .NET and VC++ related MS Software (not tested if necessary)
choosing Windows7.1SDK as Platform Toolset in VS2013
error MSB6006: "CL.exe" exited with code -1073741515
cl.exe looks for one of msobj100.dll, mspdb100.dll, mspdbcore.dll and mspdbsrv.exe
Added to PATH: C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE
Build works and binary is usable!
A mistake I did:
copied files in 6. above to C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\bin, believing this directory is in PATH, but it was not!
So better do as sugested in 7. above or by Yodan in How to build with v90 platform toolset in VS2012 without VS2008, using Windows SDK?
The following steps work for me in VS 2017.
1.Close VS 2017.
2.Restart machine.
3.Open solution in VS 2017.
4.Build the project.
This time I didn't get following error and it builds successfully.
error msb6006 "link.exe" exited with code -1073741819.
I'm trying to compile a visual studio C++ project and I can't get anywhere because of the compiler reporting "Cannot open include file: 'excpt.h': No such file or directory". The problem has been reported numerous times on the Internet but I can't find any help regarding my particular situation. The problem is not that the include path of the project are not correctly setup, the problem is that this include file (and probably a bunch of other files) are just missing from my computer. There is no such file on my hard drive. So I tried installing Windows SDK 7.1. The file is not inside the installed SDK (although it should be). I tried repairing the install, uninstall it, reinstall it... all numerous time. I also try to install, repair, uninstall, reinstall Visual Studio 2010 professional numerous time, with and without the Windows SDK installed. I even tried uninstalling the professional version to install the express VC++... nothing seems to work, no 'excpt.h' never get installed on my computer. I am clueless... someone has a hint of a solution? I'm on Windows 7.
As supplementary information, note that 'excpt.h' is included in by "windows.h". Also, the "excpt.h" file is normally installed with the Windows SDK under a path like "c:\program files (x86)\microsoft sdks\windows\v7.1\include\" and with Visual Studio under a path like "C:\Program Files\Microsoft Visual Studio 10.0\VC\include\".
EDIT: If it might help, I might add that the folder C:\Program Files\Microsoft Visual Studio 10.0\VC\include related my Visual Studio install has only two files... which is certainly not normal!!! However, I can't find any ways to get the installer to install all the .h files that should appear in this repertory.
See if you have it at C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\excpt.h Check to be sure that the system include-paths are correct in Visual Studio. If all else fails, uninstall everything, all SDK's, etc., and re-install Visual C++.
Third party search programs do a better job than the Windows one for finding things. Try Agent Ransack. It's free.
For those who have the same problem, here is the solution I found after about 10h of install/uninstall/cleaning cycles... I've uninstalled completely visual studio using this. After that, using the control panel, I've uninstalled the Windows SDK and everything that can be associated with it or with visual studio (e.g. .NET framework). Then, I've removed all the left overs by manually deleting the visual studio and the Windows SDK folders located in C:/Program files. Finally, I deleted all the entries related to the Windows SDK or to Visual Studio in the registry (they are located in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft). Then, I reinstalled Visual Studio... and it was finally working correctly. I should add that I restarted and cleaned the registry using CCleaner after any install or uninstall step.
I had this problem with a project that had been updated to VS2017 from VS2015.
This was a header included via windows.h. I knew this header should have no problems as I had other projects created directly in VS2017 that used windows.h.
Another symptom was that the intellisense was highlighting includes of standard headers (e.g string, vector etc), although these were not generating compile errors.
The fix for me was similar to VS 2010 Cannot open source file “string”.
Initially, I retargeted the project, hoping this would help (right-click the project, select retarget projects), but this did not in itself cure the problem.
I then took a working project and copied the include directories from project properties->Configuration Properties->VC++ Directories and used these to replace the same property for my broken project. This fixed the problem.
Initially, the value for this property was
$(VCInstallDir)include;$(VCInstallDir)atlmfc\include;$(WindowsSDK_IncludePath);
The replacement value was
$(VC_IncludePath);$(WindowsSDK_IncludePath);
I had the same problem, and tried the answer given by OP, but it did not work. However, copying the contents of C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC (specifically bin, lib, and include) from a machine that did work to this machine worked.
It seems the Visual Studio 2012 installer is buggy when it comes to installing into a different drive letter than C:. I have installed the VS2012 into the D: drive and got the same error. I found that for some unknown reason the installer put some of the files into the correct location at:
D:\Program Files (x86)\Microsoft Visual Studio 11.0
but the remaining files were at
C:\Program Files (x86)\Microsoft Visual Studio 11.0
so I have moved the files from the C: into the D: location and it fixed the problem.
Some situation cause such problem. If you have uninstalled vs2010. you lost platform C++ binaries for .net framework 4 forever. You have to delete all of VS 2010 2012 2013, clean system up and its accompany components and reinstall them from scratch.
Or you can download this package. Include them in your project that may solve your problem properly.
one simeple way,just copy vc directory(C:\Program Files (x86)\Microsoft Visual Studio 11.0\VC) from other computer
Fixing your Visual Studio installation is a good idea, but you don't necessarily need to re-install the same old version of VS. I uninstalled VS 2015, then modified my VS 2017 installation to add the VC++ v140 build tools, and now my project builds.