Requiring valid input with cout/cin - c++

I have a game where the user needs to enter x and y coordinates within a certain range, one at a time. Right now my input code is as follows:
do {
printf("\n");
cout << "X: ";
cin >> x;
cout << "Y: ";
cin >> y;
} while (cin.fail());
I'm new to c++ but reading documentation lead me to believe this was an acceptable method for verifying user input. It works perfectly when the input is valid, however when the input is of a different type (for instance entering "a") it infinitely loops with "X: Y: ". What do I need to do differently to have it wait for user input as if the lines were being read for the first time?

You should check every single input operation:
std::cout << "X: ";
if (!(std::cin >> x)) { /* error */ }
std::cout << "Y: ";
if (!(std::cin >> y)) { /* error */ }
It's up to you how you want to handle the error. You could return early, break from a loop, throw an exception... it all depends.
Note that you could loop until you get something parseable, but that's dangerous if the user closes the input stream. Better to read line by line and parse:
std::cout << "Please enter an integer X: ";
int x;
bool success = false;
for (std::string line; std::getline(std::cin, line); )
{
std::istringstream iss(line);
if (iss >> x >> std::ws && iss.get() == EOF) // #1
{
success = true;
break;
}
std::cout << "Sorry, please try again: ";
}
if (!success)
{
std::cerr << "Unexpected end of input stream!\n";
std::exit(1);
}
This way, if the user presses [Ctrl]-D in the middle of the session, the program shuts down immediately and doesn't try to read more values from the closed input stream.
The condition on the line marked #1 tests both for a successful parsing of an integer as well as for having reached the end of the line (gobbling intermediate whitespace).

The biggest problem with trying to parse per variable is that when a user makes a mistake, their whole input becomes suspect.
Consider if I skip invalid input and enter: "3e4 40". I meant "34 40", but skipping the e might make "3 4" and leave "40" for later or might leave "4 40".
Consider using getline to read a whole line in and parsing it such as with istringstream just as you are now -- any error becomes an error without leaving the inputstream in a weird state.

Related

std::cin failure leading to looped if statement in while loop

So I figure I'll put this here since I had to traverse a lot of docs and forums to find the definitive answer. I was trying to get input from the user and check if the input was an integer using isdigit() in an if statement. If the if statement failed the program would output an error message. Although, when a nondigit character was entered the program would loop through the error message endlessly. Here's that code:
int guess = -1;
while (game.getCurQuestion() <= 4) {
std::cout << "Guess: " << game.getCurQuestion() + 1 << std::endl;
std::cin >> guess;
if(isdigit(guess))
{
game.guess(guess);
else
{
std::cout << "Error\n"; //this would be looped endlessly
}
}
std::cout << "You got " << game.getCorrect() << " correct" << std::endl;
return 0;
}
NOTE: Solved, only posted to include my solution. Feel free to correct if I stated anything incorrectly.
The posted way will fail sometimes and will cast the doubles to integers if any doubles are input.
Use something like the following
int getIntInput() {
try {
std::string input;
std::cout << "\nPlease Enter a valid Integer:\t";
std::cin >> input;
size_t takenChars;
int num = std::stoi(input, &takenChars);
if (takenChars == input.size()) return num;
} catch (...) {}
return getIntInput();
}
Problem: The program kept hold of the non-integer value stored in the cin buffer. This leads to the program never leaving the error message.
Solution:
Use std::cin.fail() to check if the input matches the variable data type. I.E. int was the expected input but the user entered a char. In this case std::cin.fail() would be true.
In the case of std::cin.fail(), use std::cin.clear() and std::cin.ignore(std::numeric_limits<int>::max(), 'n') std::cin.clear() will clear the error flag. The std::cin.ignore(std::numeric_limits<int>::max(), 'n') will ignore any other input that is not an integer and will skip to the new line. Effectively progressing the program.
The solution implemented in my code looks like this:
int guess = -1;
while (game.getCurQuestion() <= 4) {
std::cout << "Guess: " << game.getCurQuestion() + 1 << std::endl;
std::cin >> guess;
if (std::cin.fail())
{
std::cout << "Please enter a valid number\n";
std::cin.clear();
std::cin.ignore(std::numeric_limits<int>::max(), '\n');
}
game.guess(guess);
}
Hope this helps and that it saves some people the tedious research because of never learning std::cin error handling! Note: I'm aware my implementation skips the current move, call it punishment ;)

Using consecutive while(cin >> input) successfully [duplicate]

This question already has answers here:
std::cin loops even if I call ignore() and clear()
(2 answers)
Closed 5 years ago.
My first while loop executes, until I enter a non-number to terminate it. Then, instead of while(cin >> cel) executing, it is skipped, leading the program to terminate/finish. I have tried everything including clearing the "cin bit" as described in another similiar question with no success. What am I doing wrong?
int main() {
double fah = 0;
cout << "Enter a fahrenheit value:\n";
while (cin >> fah) { // executes until a non-number input is entered
cout << fah << "F == " << fah_to_cel(fah) << "C\n";
}
// tried cin.clear(); here
// tried cin.clear(ios_base::eofbit); here
double cel = 0;
cout << "Enter a celcius value:\n";
while(cin >> cel) { // executes until a non-number input is entered
cout << cel << "C == " << cel_to_fah(cel) << "F\n";
}
return 0;
}
You were correct to call cin.clear(). That resets the error flags of cin, which you need to do before you can perform any more input operations. But you need to do one more thing. When input fails, whatever characters cin was trying to read remain in the input buffer. So when you try to collect input again (after clearing the error), it will fail again. So you need to remove the data that was left in the buffer. You can do that like this:
std::streamsize amount_to_ignore = std::numeric_limits<std::streamsize>::max();
std::cin.ignore(amount_to_ignore, '\n');
This tells cin to discard all characters in its buffer until it finds a newline character (which should be in there from when you last pressed the enter key).
This is, in my opinion, a very clunky and error prone way to do user input. I would suggest that you exclusively use std::getline when reading from cin, which should never fail (except in the unlikely event of a memory allocation failure). And then parsing the resulting string manually, which gives you a lot more control over the form of the input.

Smarter way to implement this switch statement

So I am trying to allow a user to make a selection but Im having issue. the following lines
cout << "\nWhat would you like to do? " << endl
<< "(1) Display the entire List" << endl
<< "(2) to exit" << endl;
getline(cin,answer);
answerint=stoi(answer);
switch (answerint) {
case 1:
showLIST(myLIst);
break;
case 2:
return;
default:
cout << "\nPlease choose from the list";
}
So this works fine if the user chooses a integer, but it barfs if a character is received. How can I make this less breakable?
It seems you want something like this:
if (std::cin >> answerint) {
switch (answerint) {
// ...
}
}
Converting the integer directly from the stream puts the stream into failure state in case something different than an int is entered. You may want to add a manipulator to make sure there are no non-space characters on the end of the line.
std::string answer;
int answerint;
while (std::getline(std::cin, answer))
{
std::istringstream iss(answer);
char c; // seek non-whitespace after the number?
if (!(iss >> answerint) || (iss >> c))
answerint = 0;
switch (answerint)
{
...as you had...
}
}
The code above uses getline to ensure a complete line of text is parsed into answer, after which it creates a distinct std::istringstream from that single line. That way, we can use >> knowing it won't skip over newlines are consume or wait for further input.
if (!(iss >> answerint) || (iss >> c)) checks whether there isn't a number to parse into answerint, or after having parsed a number an additional non-whitespace character appears on the line. For example, the line typed might have been 2r - we'll consider that an error and reprompt for a selection, assigning 0 to answerint to ensure we reach the default label in the switch, thereby printing cout << "\nPlease choose from the list"; which seems as appropriate for 2r as for 99 or whatever....
Using getline and a separate istringstream this way, you can reliably attempt parsing of the next line of input from a known state.

How do I prevent a runaway input loop when I request a number but the user enters a non-number?

I need to know how to make my cin statement not appear to 'remove' itself if you input the wrong type. The code is here:
int mathOperator()
{
using namespace std;
int Input;
do
{
cout << "Choose: ";
el();
cout << "1) Addition";
el();
cout << "2) Subtraction";
el();
cout << "3) Multiplication";
el();
cout << "4) Division";
el();
el();
cin >> Input;
}
while (Input != 1 && Input != 2 && Input!=3 && Input!=4);
return Input;
}
Execute, enter, for example, a character, and it loops nonstop acting as though the cin statement isn't there.
You must check that input succeeded and handle when it doesn't:
int mathOperator() {
using namespace std;
int Input;
do {
cout << "Choose: ";
el();
cout << "1) Addition";
el();
cout << "2) Subtraction";
el();
cout << "3) Multiplication";
el();
cout << "4) Division";
el();
el();
while (!(cin >> Input)) { // failed to extract
if (cin.eof()) { // testing eof() *after* failure detected
throw std::runtime_error("unexpected EOF on stdin");
}
cin.clear(); // clear stream state
cin.ignore(INT_MAX, '\n'); // ignore rest of line
cout << "Input error. Try again!\n";
}
} while (Input != 1 && Input != 2 && Input!=3 && Input!=4);
return Input;
}
If you don't check that extraction succeeded, then cin is left in a failed state (cin.fail()). Once in a failed state, later extractions will immediately return instead of trying to read from the stream, effectively making them no-ops – leading to your infinite loop.
Unless you're quite certain about the input being in the proper format, you rarely want to use operator>> directly from the input stream.
It's usually easier to read a line with std::getline, put that into a std::istringstream, and read from there. If that fails, you print/log an error message, throw away the remainder of the line and (possibly) go on to the next line.
After reading in a bad value, cin is in a "failed" state. You have to reset this.
You must both clear the error flag and empty the buffer. thus:
cin.clear();
cin.ignore(std::numeric_limits<streamsize>::max(), '\n');
The second call "flushes" the input buffer of any data that might be there, to get you ready for the next "cin" call.
If you find yourself writing these 2 lines "all over your code" you could write a simple inline function to replace it.
inline void reset( std::istream & is )
{
is.clear();
is.ignore( std::numeric_limits<std::streamsize>::max(), '\n' );
}
Although I have made this function take any istream, most of the time it would only be used for cin where a user is entering and enters something invalid. If it's an invalid file or stringstream input, there is no way to fix it and you would do best to just throw an exception.
don't read int, read char so cin will pass any invalid character
char Input;
do
{
// same code
}
while (Input != '1' && Input != '2' && Input != '3' && Input!='4');
return Input;
[EDIT]
If you want convert char to int you can use this piece of code
int i = (Input - 48);
I agree that a char is just as handy, since you can always cast to int, to answer your question as to why this is happening, when a cin input is exected as an int but a char is entered, the input is kept in the input stream for the duration of the loop, which is why it seems to "disappear."
For more information: see the post from Narue at http://www.daniweb.com/forums/thread11505.html

While loop with try catch fails at bad cin input

I can't seem to figure out why this falls into a loop after getting non-int input. I've tried cin.flush(), which doesn't seem to exist, cin.clear(), which seems like it should work, even cin.sync() after reading someone else post about it working, but didn't seem to make much sense. Also tried cin.bad().
Thank you very much for any help
Please enter the first number: f
Sorry, I don't think that's a number?
Please enter the first number: Sorry,
I don't think that's a number?
Please enter the first number: Sorry,
I don't think that's a number?
Please enter the first number: Sorry,
I don't think that's a number?
Please enter the first number: Sorry,
I don't think that's a number?Sorry,
you d on't get any more tries. Press
any key to continue . . .
#include <iostream>
using namespace std;
int main(){
int entry;
int attempts = 1;
int result;
while(attempts <= 5) {
try {
cout << "\n\nPlease enter the first number: ";
cin >> entry;
if (cin.fail())
throw "Sorry, I don't think that's a number?";
if (entry < 0)
throw "Sorry, no negative numbers. Try something else? ";
cout << "\nNow the second number: ";
cin >> entry;
cin.clear();
cin.get();
}
catch (char* error) {
cout << error;
attempts++;
}
}
if (attempts > 5)
cout << "Sorry, you don\'t get any more tries.\n";
system("pause");
return 0;
}
You should think carefully what you want to do if user gives invalid input in this case. Usually in these cases the best solution is to read one line from the input and throw it away.
Try putting cin.clear() and std::cin.ignore(std::numeric_limits<streamsize>::max(),'\n'); in your catch clause. cin.clear() clears the failure state in cin, and cin.ignore() throws away rest of the line waiting in the input buffer.
(And yes, you probably should rethink your use of exceptions).
The most straight-forward (but not usually the easiest nor the fastest) way of dealing with validation of line-based input is to always read it line at a time. This way no extra whitespace (such as linefeed characters) is left unread in the buffer in any case, and discarding erroneous input is also quite automatic.
// Infinite loop for retrying until successful
while (true) {
// Ask the user something
std::cout << prompt;
// Read the answer (one full line)
std::string line;
if (!std::getline(std::cin, line))
throw std::runtime_error("End of input while expecting a value");
// Put the line read into iss for further parsing
std::istringstream iss(line);
int val;
// Read val from iss and verify that reading was successful and
// that all input was consumed
if (iss >> val && iss.get() == EOF) return val;
std::cout << "Invalid input, try again!\n";
}
It is fun to make a BASIC style input function out of this:
template <typename Val> void input(std::string const& prompt, Val& val) {
// (the above code goes here, slightly adjusted)
}
int main() {
int w;
double l;
input("Enter weight in kg: ", w);
input("Enter length in m: ", l);
std::cout << "BMI: " << w / (l * l) << std::endl;
}
Notes for the pedantics who were going to downvote me:
function input should be specialized for std::string
exceptions thrown by the input function should be caught in main
My Problem was to block char input to a cin >> number
This error caused an 'infinite' loop showing my prompt cout << prompt
with no way of exit but kill the process ...
The following shows what worked for me!
========================================
double fi_trap_d() // function to return a valid range double catching errors
{
double fi_game_sec;
//-------------------------------------------
do
{
fi_game_sec = -1;
cout << fi_game_sec_c;
//------------------------------
cin.ignore(); // (1)
//------------------------------
try
{ cin >> fi_game_sec; cin.clear(); } // (2)
catch (...) //out_of_range)
{
fi_game_sec = -1;
cout << " Dis am an error!\n";
// just loop back as we asked for a number
}
} while (fi_game_sec < 1);
//-------------------------------------------
return fi_game_sec;
}
========================================
Despite trying the " Dis am an error! " has NEVER shown up.
The key was (1) & (2) !
Exceptions should be used to handle exceptional, unexpected situations. Incorrect input from a user is neither unexpected nor exceptional -- it's more or less the norm. Personally, I tend to just ignore most bad input completely (when it can't be prevented). When (and only when) they enter something unusable repeatedly is it even worth pointing it out to them. As such, I'd tend to write the code something like:
char ch;
int attempts = 0;
std::cout << "Please enter the first number: ";
do {
cin >> ch;
attempts++;
if (attempts > 5)
std::cerr << "The only allowable inputs are '0' through '9'\n";
} while (cin.good() && !isdigit(ch));
int first_number = ch - '0';
This reads the input as a character, so it's always removed from the input stream. Then it attempts to validate the input, and if it fails, attempts to read again. Of course, you might want/need to get a little more elaborate, such as reading an entire line, attempting to convert it to a number, and reading another line if that fails.
Why are you doing this with exceptions? You're not going to kill the program on input, so you shouldn't throw an exception.
Just print out your error message and attempt to read in again.
It looks like you would be better off with iostream's native exceptions. Enable with
cin.exceptions( ios::failbit );
try {
…
} catch( ios_base::failure & ) {
cin.clear();
…
}
Never, ever throw an an object not derived from std::exception, and especially not a native type like char*.