Im doing a small exercise to read a file which contains one long string and load this into an array of strings. So far I have:
char* data[11];
char buf[15];
int i = 0;
FILE* indata;
indata = fopen( "somefile.txt", "r" );
while( i < 11)
{
fgets(buf, 16, indata);
data[i] = buf;
i++;
}
fclose( indata );
somefile.txt: "aaaaaaaaaaaaaaaaaaaaaaaaabbbbbbbaahhhhhbbbbdddddddddddddbbbbb"
etc..
This reads in 15 characters, adds that string to the array and gets the next 15. The problem is the array always equals the last string, so if the last string is "ccccv" the whole array, data[0] = "ccccv", data[1] = "ccccv", data[2] = "ccccv" and so on.
Does anyone know why this is happening and whether there is a better way to do it? Thanks
Each pointer in data will point to the same memory area, which is buf.
You need to use strcpy + malloc.
Also is seems like you have a "minor" buffer overflow. buf is size 15 and you're reading 16 characters.
Related
I did a sample project to read a file into a buffer.
When I use the tellg() function it gives me a larger value than the
read function is actually read from the file. I think that there is a bug.
here is my code:
EDIT:
void read_file (const char* name, int *size , char*& buffer)
{
ifstream file;
file.open(name,ios::in|ios::binary);
*size = 0;
if (file.is_open())
{
// get length of file
file.seekg(0,std::ios_base::end);
int length = *size = file.tellg();
file.seekg(0,std::ios_base::beg);
// allocate buffer in size of file
buffer = new char[length];
// read
file.read(buffer,length);
cout << file.gcount() << endl;
}
file.close();
}
main:
void main()
{
int size = 0;
char* buffer = NULL;
read_file("File.txt",&size,buffer);
for (int i = 0; i < size; i++)
cout << buffer[i];
cout << endl;
}
tellg does not report the size of the file, nor the offset
from the beginning in bytes. It reports a token value which can
later be used to seek to the same place, and nothing more.
(It's not even guaranteed that you can convert the type to an
integral type.)
At least according to the language specification: in practice,
on Unix systems, the value returned will be the offset in bytes
from the beginning of the file, and under Windows, it will be
the offset from the beginning of the file for files opened in
binary mode. For Windows (and most non-Unix systems), in text
mode, there is no direct and immediate mapping between what
tellg returns and the number of bytes you must read to get to
that position. Under Windows, all you can really count on is
that the value will be no less than the number of bytes you have
to read (and in most real cases, won't be too much greater,
although it can be up to two times more).
If it is important to know exactly how many bytes you can read,
the only way of reliably doing so is by reading. You should be
able to do this with something like:
#include <limits>
file.ignore( std::numeric_limits<std::streamsize>::max() );
std::streamsize length = file.gcount();
file.clear(); // Since ignore will have set eof.
file.seekg( 0, std::ios_base::beg );
Finally, two other remarks concerning your code:
First, the line:
*buffer = new char[length];
shouldn't compile: you have declared buffer to be a char*,
so *buffer has type char, and is not a pointer. Given what
you seem to be doing, you probably want to declare buffer as
a char**. But a much better solution would be to declare it
as a std::vector<char>& or a std::string&. (That way, you
don't have to return the size as well, and you won't leak memory
if there is an exception.)
Second, the loop condition at the end is wrong. If you really
want to read one character at a time,
while ( file.get( buffer[i] ) ) {
++ i;
}
should do the trick. A better solution would probably be to
read blocks of data:
while ( file.read( buffer + i, N ) || file.gcount() != 0 ) {
i += file.gcount();
}
or even:
file.read( buffer, size );
size = file.gcount();
EDIT: I just noticed a third error: if you fail to open the
file, you don't tell the caller. At the very least, you should
set the size to 0 (but some sort of more precise error
handling is probably better).
In C++17 there are std::filesystem file_size methods and functions, so that can streamline the whole task.
std::filesystem::file_size - cppreference.com
std::filesystem::directory_entry::file_size - cppreference.com
With those functions/methods there's a chance not to open a file, but read cached data (especially with the std::filesystem::directory_entry::file_size method)
Those functions also require only directory read permissions and not file read permission (as tellg() does)
void read_file (int *size, char* name,char* buffer)
*buffer = new char[length];
These lines do look like a bug: you create an char array and save to buffer[0] char. Then you read a file to buffer, which is still uninitialized.
You need to pass buffer by pointer:
void read_file (int *size, char* name,char** buffer)
*buffer = new char[length];
Or by reference, which is the c++ way and is less error prone:
void read_file (int *size, char* name,char*& buffer)
buffer = new char[length];
...
fseek(fptr, 0L, SEEK_END);
filesz = ftell(fptr);
will do the file if file opened through fopen
using ifstream,
in.seekg(0,ifstream::end);
dilesz = in.tellg();
would do similar
None of the posted answers I've read work, so I'm asking again.
I'm trying to copy the string data pointed to by a char pointer into a char array.
I have a function that reads from a ifstream into a char array
char* FileReader::getNextBytes(int numberOfBytes) {
char *buf = new char[numberOfBytes];
file.read(buf, numberOfBytes);
return buf;
}
I then have a struct :
struct Packet {
char data[MAX_DATA_SIZE]; // can hold file name or data
} packet;
I want to copy what is returned from getNextBytes(MAX_DATA_SIZE) into packet.data;
EDIT: Let me show you what I'm getting with all the answers gotten below (memcpy, strcpy, passing as parameter). I'm thinking the error comes from somewhere else. I'm reading a file as binary (it's a png). I'll loop while the fstream is good() and read from the fstream into the buf (which might be the data array). I want to see the length of what I've read :
cout << strlen(packet.data) << endl;
This returns different sizes every time:
8
529
60
46
358
66
156
After that, apparently there are no bytes left to read although the file is 13K + bytes long.
This can be done using standard library function memcpy, which is declared in / :
strcpy(packet.data, buf);
This requires file.read returns proper char series that ends with '\0'. You might also want to ensure numberOfBytes is big enough to accommodate the whole string. Otherwise you could possibly get segmentation fault.
//if buf not properly null terminated added a null char at the end
buf[numberofbytes] = "\0"
//copy the string from buf to struc
strcpy(packet.data, buf);
//or
strncpy(packet.data, buf);
Edit:
Whether or not this is being handled as a string is a very important distinction. In your question, you referred to it as a "string", which is what got us all confused.
Without any library assistance:
char result = reader.getNextBytes(MAX_DATA_SIZE);
for (int i = 0; i < MAX_DATA_SIZE; ++MAX_DATA_SIZE) {
packet.data[i] = result[i];
}
delete [] result;
Using #include <cstring>:
memcpy(packet.data, result, MAX_DATA_SIZE);
Or for extra credit, rewrite getNextBytes so it has an output parameter:
char* FileReader::getNextBytes(int numberOfBytes, char* buf) {
file.read(buf, numberOfBytes);
return buf;
}
Then it's just:
reader.getNextBytes(MAX_DATA_SIZE, packet.data);
Edit 2:
To get the length of a file:
file.seekg (0, ios::end);
int length = file.tellg();
file.seekg (0, ios::beg);
And with that in hand...
char* buffer = new char[length];
file.read(buffer, length);
Now you have the entire file in buffer.
strlen is not a valid way to determine the amount of binary data. strlen just reads until it finds '\0', nothing more. If you want to read a chunk of binary data, just use a std::vector, resize it to the amount of bytes you read from the file, and return it as value. Problem solved.
I'm trying to read buffer in C++ one character at the time until '\n', and initialize char array with these characters using do-while loop. I know I could use cin.getline(), but I want to try it on my own.
int main()
{
char buffer [1024];
int index = 0;
char temp;
do
{
cin.get( temp );
buffer [ index ] = temp;
index ++;
}
while ( temp != '\n' );
cout << buffer << endl;
return 0;
}
It gives me incorrect result-the proper text fallow by couple of lines of squre brackets mixed with other weird symbols.
At first, after whole text you have to append '\0' as end of string
it should look like buffer[ index ] = 0; because you should rewrite your \n character which you append too.
Of course, there are other things which you should check but they are not your main problem
length of your input because you have limited buffer - max length is 1023 + null byte
end of standard input cin.eof()
You're not null-delimiting your buffer.
Try to change the first line to
char buffer[1024] = "";
This will set all characters in buffer to 0. Or, alternatively, set only the last character to 0, by doing
buffer[index] = 0;
after the loop.
Also, (as correctly pointed by others) if the text is longer than 1024 characters, you'll have a buffer overrun error - one of the most often exploited causes for security issues in software.
Two things:
If the length of the line you are
reading exceeds 1024 you write past
the buffer which is bad.
If the length is within the
limit,you are not terminating the
string with null char.
You can trying doing it the following way. This way if you find a fine exceeding the buffer size, we truncate it and also add the null char at the end ouside the loop.
#define MAX 1024
int main()
{
char buffer [MAX];
int index = 0;
char temp;
do
{
// buffer full.
if(index == MAX-1)
break;
cin.get( temp );
buffer [ index ] = temp;
index ++;
}
while ( temp != '\n' );
// add null char at the end.
buffer[index] = '\0';
cout << buffer << endl;
return 0;
}
Several issues I noted:
(1) What character encoding is the input. You could be reading 8,16, or 32 bit characters. Are you sure you're reading ASCII?
(2) You are searching for '\n' the end of line character could be '\r\n' or '\r' or '\n' depending on your platform. Perhaps the \r character by itself is your square bracket?
You stop filling the buffer when you get to a newline, so the rest is uninitialised. You can zero-initialise your buffer by defining it with: char buffer[1024] = {0}; This will fix your problem.
You are not putting a '\0' at the end of the string. Additionally, you should really check for buffer overflow conditions. Stop reading when index gets to 1024.
.
unsigned int fname_length = 0;
//fname length equals 30
file.read((char*)&fname_length,sizeof(unsigned int));
//fname contains random data as you would expect
char *fname = new char[fname_length];
//fname contains all the data 30 bytes long as you would expect, plus 18 bytes of random data on the end (intellisense display)
file.read((char*)fname,fname_length);
//m_material_file (std:string) contains all 48 characters
m_material_file = fname;
// count = 48
int count = m_material_file.length();
now when trying this way, intellisense still shows the 18 bytes of data after setting the char array to all ' ' and I get exactly the same results. even without the file read
char name[30];
for(int i = 0; i < 30; ++i)
{
name[i] = ' ';
}
file.read((char*)fname,30);
m_material_file = name;
int count = m_material_file.length();
any idea whats going wrong here, its probably something completely obvious but im stumped!
thanks
Sounds like the string in the file isn't null-terminated, and intellisense is assuming that it is. Or perhaps when you wrote the length of the string (30) into the file, you didn't include the null character in that count. Try adding:
fname[fname_length] = '\0';
after the file.read(). Oh yeah, you'll need to allocate an extra character too:
char * fname = new char[fname_length + 1];
I guess that intellisense is trying to interpret char* as C string and is looking for a '\0' byte.
fname is a char* so both the debugger display and m_material_file = fname will be expecting it to be terminated with a '\0'. You're never explicitly doing that, but it just happens that whatever data follows that memory buffer has a zero byte at some point, so instead of crashing (which is a likely scenario at some point), you get a string that's longer than you expect.
Use
m_material_file.assign(fname, fname + fname_length);
which removes the need for the zero terminator. Also, prefer std::vector to raw arrays.
std::string::operator=(char const*) is expecting a sequence of bytes terminated by a '\0'. You can solve this with any of the following:
extend fname by a character and add the '\0' explicitly as others have suggested or
use m_material_file.assign(&fname[0], &fname[fname_length]); instead or
use repeated calls to file.get(ch) and m_material_file.push_back(ch)
Personally, I would use the last option since it eliminates the explicitly allocated buffer altogether. One fewer explicit new is one fewer chance of leaking memory. The following snippet should do the job:
std::string read_name(std::istream& is) {
unsigned int name_length;
std::string file_name;
if (is.read((char*)&name_length, sizeof(name_length))) {
for (unsigned int i=0; i<name_length; ++i) {
char ch;
if (is.get(ch)) {
file_name.push_back(ch);
} else {
break;
}
}
}
return file_name;
}
Note:
You probably don't want to use sizeof(unsigned int) to determine how many bytes to write to a binary file. The number of bytes read/written is dependent on the compiler and platform. If you have a maximum length, then use it to determine the specific byte size to write out. If the length is guaranteed to fewer than 255 bytes, then only write a single byte for the length. Then your code will not depend on the byte size of intrinsic types.
Hello I have a chunk of memory (allocated with malloc()) that contains bits (bit literal), I'd like to read it as an array of char, or, better, I'd like to printout the ASCII value of 8 consecutively bits of the memory.
I have allocated he memory as char *, but I've not been able to take characters out in a better way than evaluating each bit, adding the value to a char and shifting left the value of the char, in a loop, but I was looking for a faster solution.
Thank you
What I've wrote for now is this:
for allocation:
char * bits = (char*) malloc(1);
for writing to mem:
ifstream cleartext;
cleartext.open(sometext);
while(cleartext.good())
{
c = cleartext.get();
for(int j = 0; j < 8; j++)
{ //set(index) and reset(index) set or reset the bit at bits[i]
(c & 0x80) ? (set(index)):(reset(index));//(*ptr++ = '1'):(*ptr++='0');
c = c << 1;
}..
}..
and until now I've not been able to get character back, I only get the bits printed out using:
printf("%s\n" bits);
An example of what I'm trying to do is:
input.txt contains the string "AAAB"
My program would have to write "AAAB" as "01000001010000010100000101000010" to memory
(it's the ASCII values in bit of AAAB that are 65656566 in bits)
Then I would like that it have a function to rewrite the content of the memory to a file.
So if memory contains again "01000001010000010100000101000010" it would write to the output file "AAAB".
int numBytes = 512;
char *pChar = (char *)malloc(numBytes);
for( int i = 0; i < numBytes; i++ ){
pChar[i] = '8';
}
Since this is C++, you can also use "new":
int numBytes = 512;
char *pChar = new char[numBytes];
for( int i = 0; i < numBytes; i++ ){
pChar[i] = '8';
}
If you want to visit every bit in the memory chunk, it looks like you need std::bitset.
char* pChunk = malloc( n );
// read in pChunk data
// iterate over all the bits.
for( int i = 0; i != n; ++i ){
std::bitset<8>& bits = *reinterpret_cast< std::bitset<8>* >( pByte );
for( int iBit = 0; iBit != 8; ++iBit ) {
std::cout << bits[i];
}
}
I'd like to printout the ASCII value of 8 consecutively bits of the memory.
The possible value for any bit is either 0 or 1. You probably want at least a byte.
char * bits = (char*) malloc(1);
Allocates 1 byte on the heap. A much more efficient and hassle-free thing would have been to create an object on the stack i.e.:
char bits; // a single character, has CHAR_BIT bits
ifstream cleartext;
cleartext.open(sometext);
The above doesn't write anything to mem. It tries to open a file in input mode.
It has ascii characters and common eof or \n, or things like this, the input would only be a textfile, so I think it should only contain ASCII characters, correct me if I'm wrong.
If your file only has ASCII data you don't have to worry. All you need to do is read in the file contents and write it out. The compiler manages how the data will be stored (i.e. which encoding to use for your characters and how to represent them in binary, the endianness of the system etc). The easiest way to read/write files will be:
// include these on as-needed basis
#include <algorithm>
#include <iostream>
#include <iterator>
#include <fstream>
using namespace std;
// ...
/* read from standard input and write to standard output */
copy((istream_iterator<char>(cin)), (istream_iterator<char>()),
(ostream_iterator<char>(cout)));
/*-------------------------------------------------------------*/
/* read from standard input and write to text file */
copy(istream_iterator<char>(cin), istream_iterator<char>(),
ostream_iterator<char>(ofstream("output.txt"), "\n") );
/*-------------------------------------------------------------*/
/* read from text file and write to text file */
copy(istream_iterator<char>(ifstream("input.txt")), istream_iterator<char>(),
ostream_iterator<char>(ofstream("output.txt"), "\n") );
/*-------------------------------------------------------------*/
The last remaining question is: Do you want to do something with the binary representation? If not, forget about it. Else, update your question one more time.
E.g: Processing the character array to encrypt it using a block cipher
/* a hash calculator */
struct hash_sha1 {
unsigned char operator()(unsigned char x) {
// process
return rc;
}
};
/* store house of characters, could've been a vector as well */
basic_string<unsigned char> line;
/* read from text file and write to a string of unsigned chars */
copy(istream_iterator<unsigned char>(ifstream("input.txt")),
istream_iterator<char>(),
back_inserter(line) );
/* Calculate a SHA-1 hash of the input */
basic_string<unsigned char> hashmsg;
transform(line.begin(), line.end(), back_inserter(hashmsg), hash_sha1());
Something like this?
char *buffer = (char*)malloc(42);
// ... put something into the buffer ...
printf("%c\n", buffer[0]);
But, since you're using C++, I wonder why you bother with malloc and such...
char* ptr = pAddressOfMemoryToRead;
while(ptr < pAddressOfMemoryToRead + blockLength)
{
char tmp = *ptr;
// temp now has the char from this spot in memory
ptr++;
}
Is this what you are trying to achieve:
char* p = (char*)malloc(10 * sizeof(char));
char* p1 = p;
memcpy(p,"abcdefghij", 10);
for(int i = 0; i < 10; ++i)
{
char c = *p1;
cout<<c<<" ";
++p1;
}
cout<<"\n";
free(p);
Can you please explain in more detail, perhaps including code? What you're saying makes no sense unless I'm completely misreading your question. Are you doing something like this?
char * chunk = (char *)malloc(256);
If so, you can access any character's worth of data by treating chunk as an array: chunk[5] gives you the 5th element, etc. Of course, these will be characters, which may be what you want, but I can't quite tell from your question... for instance, if chunk[5] is 65, when you print it like cout << chunk[5];, you'll get a letter 'A'.
However, you may be asking how to print out the actual number 65, in which case you want to do cout << int(chunk[5]);. Casting to int will make it print as an integer value instead of as a character. If you clarify your question, either I or someone else can help you further.
Are you asking how to copy the memory bytes of an arbitrary struct into a char* array? If so this should do the trick
SomeType t = GetSomeType();
char* ptr = malloc(sizeof(SomeType));
if ( !ptr ) {
// Handle no memory. Probably should just crash
}
memcpy(ptr,&t,sizeof(SomeType));
I'm not sure I entirely grok what you're trying to do, but a couple of suggestions:
1) use std::vector instead of malloc/free and new/delete. It's safer and doesn't have much overhead.
2) when processing, try doing chunks rather than bytes. Even though streams are buffered, it's usually more efficient grabbing a chunk at a time.
3) there's a lot of different ways to output bits, but again you don't want a stream output for each character. You might want to try something like the following:
void outputbits(char *dest, char source)
{
dest[8] = 0;
for(int i=0; i<8; ++i)
dest[i] = source & (1<<(7-i)) ? '1':'0';
}
Pass it a char[9] output buffer and a char input, and you get a printable bitstring back. Decent compilers produce OK output code for this... how much speed do you need?