Related
For a monte carlo integration process, I need to pull a lot of random samples from
a histogram that has N buckets, and where N is arbitrary (i.e. not a power of two) but
doesn't change at all during the course of the computation.
By a lot, I mean something on the order of 10^10, 10 billions, so pretty much any
kind of lengthy precomputation is likely worth it in the face of the sheer number of
samples).
I have at my disposal a very fast uniform pseudo random number generator that
typically produces unsigned 64 bits integers (all the ints in the discussion
below are unsigned).
The naive way to pull a sample : histogram[ prng() % histogram.size() ]
The naive way is very slow: the modulo operation is using an integer division (IDIV)
which is terribly expensive and the compiler, not knowing the value of histogram.size()
at compile time, can't be up to its usual magic (i.e. http://www.azillionmonkeys.com/qed/adiv.html)
As a matter of fact, the bulk of my computation time is spent extracting that darn modulo.
The slightly less naive way: I use libdivide (http://libdivide.com/) which is capable
of pulling off a very fast "divide by a constant not known at compile time".
That gives me a very nice win (25% or so), but I have a nagging feeling that I can do
better, here's why:
First intuition: libdivide computes a division. What I need is a modulo, and to get there
I have to do an additional mult and a sub : mod = dividend - divisor*(uint64_t)(dividend/divisor). I suspect there might be a small win there, using libdivide-type
techniques that produce the modulo directly.
Second intuition: I am actually not interested in the modulo itself. What I truly want is
to efficiently produce a uniformly distributed integer value that is guaranteed to be strictly smaller than N.
The modulo is a fairly standard way of getting there, because of two of its properties:
A) mod(prng(), N) is guaranteed to be uniformly distributed if prng() is
B) mod(prgn(), N) is guaranteed to belong to [0,N[
But the modulo is/does much more that just satisfy the two constraints above, and in fact
it does probably too much work.
All need is a function, any function that obeys constraints A) and B) and is fast.
So, long intro, but here comes my two questions:
Is there something out there equivalent to libdivide that computes integer modulos directly ?
Is there some function F(X, N) of integers X and N which obeys the following two constraints:
If X is a random variable uniformly distributed then F(X,N) is also unirformly distributed
F(X, N) is guranteed to be in [0, N[
(PS : I know that if N is small, I do not need to cunsume all the 64 bits coming out of
the PRNG. As a matter of fact, I already do that. But like I said, even that optimization
is a minor win when compare to the big fat loss of having to compute a modulo).
Edit : prng() % N is indeed not exactly uniformly distributed. But for N large enough, I don't think it's much of problem (or is it ?)
Edit 2 : prng() % N is indeed potentially very badly distributed. I had never realized how bad it could get. Ouch. I found a good article on this : http://ericlippert.com/2013/12/16/how-much-bias-is-introduced-by-the-remainder-technique
Under the circumstances, the simplest approach may work the best. One extremely simple approach that might work out if your PRNG is fast enough would be to pre-compute one less than the next larger power of 2 than your N to use as a mask. I.e., given some number that looks like 0001xxxxxxxx in binary (where x means we don't care if it's a 1 or a 0) we want a mask like 000111111111.
From there, we generate numbers as follows:
Generate a number
and it with your mask
if result > n, go to 1
The exact effectiveness of this will depend on how close N is to a power of 2. Each successive power of 2 is (obviously enough) double its predecessor. So, in the best case N is exactly one less than a power of 2, and our test in step 3 always passes. We've added only a mask and a comparison to the time taken for the PRNG itself.
In the worst case, N is exactly equal to a power of 2. In this case, we expect to throw away roughly half the numbers we generated.
On average, N ends up roughly halfway between powers of 2. That means, on average, we throw away about one out of four inputs. We can nearly ignore the mask and comparison themselves, so our speed loss compared to the "raw" generator is basically equal to the number of its outputs that we discard, or 25% on average.
If you have fast access to the needed instruction, you could 64-bit multiply prng() by N and return the high 64 bits of the 128-bit result. This is sort of like multiplying a uniform real in [0, 1) by N and truncating, with bias on the order of the modulo version (i.e., practically negligible; a 32-bit version of this answer would have small but perhaps noticeable bias).
Another possibility to explore would be use word parallelism on a branchless modulo algorithm operating on single bits, to get random numbers in batches.
Libdivide, or any other complex ways to optimize that modulo are simply overkill. In a situation as yours, the only sensible approach is to
ensure that your table size is a power of two (add padding if you must!)
replace the modulo operation with a bitmask operation. Like this:
size_t tableSize = 1 << 16;
size_t tableMask = tableSize - 1;
...
histogram[prng() & tableMask]
A bitmask operation is a single cycle on any CPU that is worth its money, you can't beat its speed.
--
Note:
I don't know about the quality of your random number generator, but it may not be a good idea to use the last bits of the random number. Some RNGs produce poor randomness in the last bits and better randomness in the upper bits. If that is the case with your RNG, use a bitshift to get the most significant bits:
size_t bitCount = 16;
...
histogram[prng() >> (64 - bitCount)]
This is just as fast as the bitmask, but it uses different bits.
You could extend your histogram to a "large" power of two by cycling it, filling in the trailing spaces with some dummy value (guaranteed to never occur in the real data). E.g. given a histogram
[10, 5, 6]
extend it to length 16 like so (assuming -1 is an appropriate sentinel):
[10, 5, 6, 10, 5, 6, 10, 5, 6, 10, 5, 6, 10, 5, 6, -1]
Then sampling can be done via a binary mask histogram[prng() & mask] where mask = (1 << new_length) - 1, with a check for the sentinel value to retry, that is,
int value;
do {
value = histogram[prng() & mask];
} while (value == SENTINEL);
// use `value` here
The extension is longer than necessary to make retries unlikely by ensuring that the vast majority of the elements are valid (e.g. in the example above only 1/16 lookups will "fail", and this rate can be reduced further by extending it to e.g. 64). You could even use a "branch prediction" hint (e.g. __builtin_expect in GCC) on the check so that the compiler orders code to be optimal for the case when value != SENTINEL, which is hopefully the common case.
This is very much a memory vs. speed trade-off.
Just a few ideas to complement the other good answers:
What percent of time is spent in the modulo operation, and how do you know what that percent is? I only ask because sometimes people say something is terribly slow when in fact it is less than 10% of the time and they only think it's big because they're using a silly self-time-only profiler. (I have a hard time envisioning a modulo operation taking a lot of time compared to a random number generator.)
When does the number of buckets become known? If it doesn't change too frequently, you can write a program-generator. When the number of buckets changes, automatically print out a new program, compile, link, and use it for your massive execution.
That way, the compiler will know the number of buckets.
Have you considered using a quasi-random number generator, as opposed to a pseudo-random generator? It can give you higher precision of integration in much fewer samples.
Could the number of buckets be reduced without hurting the accuracy of the integration too much?
The non-uniformity dbaupp cautions about can be side-stepped by rejecting&redrawing values no less than M*(2^64/M) (before taking the modulus).
If M can be represented in no more than 32 bits, you can get more than one value less than M by repeated multiplication (see David Eisenstat's answer) or divmod; alternatively, you can use bit operations to single out bit patterns long enough for M, again rejecting values no less than M.
(I'd be surprised at modulus not being dwarfed in time/cycle/energy consumption by random number generation.)
To feed the bucket, you may use std::binomial_distribution to directly feed each bucket instead of feeding the bucket one sample by one sample:
Following may help:
int nrolls = 60; // number of experiments
const std::size_t N = 6;
unsigned int bucket[N] = {};
std::mt19937 generator(time(nullptr));
for (int i = 0; i != N; ++i) {
double proba = 1. / static_cast<double>(N - i);
std::binomial_distribution<int> distribution (nrolls, proba);
bucket[i] = distribution(generator);
nrolls -= bucket[i];
}
Live example
Instead of integer division you can use fixed point math, i.e integer multiplication & bitshift. Say if your prng() returns values in range 0-65535 and you want this quantized to range 0-99, then you do (prng()*100)>>16. Just make sure that the multiplication doesn't overflow your integer type, so you may have to shift the result of prng() right. Note that this mapping is better than modulo since it's retains the uniform distribution.
Thanks everyone for you suggestions.
First, I am now thoroughly convinced that modulo is really evil.
It is both very slow and yields incorrect results in most cases.
After implementing and testing quite a few of the suggestions, what
seems to be the best speed/quality compromise is the solution proposed
by #Gene:
pre-compute normalizer as:
auto normalizer = histogram.size() / (1.0+urng.max());
draw samples with:
return histogram[ (uint32_t)floor(urng() * normalizer);
It is the fastest of all methods I've tried so far, and as far as I can tell,
it yields a distribution that's much better, even if it may not be as perfect
as the rejection method.
Edit: I implemented David Eisenstat's method, which is more or less the same as Jarkkol's suggestion : index = (rng() * N) >> 32. It works as well as the floating point normalization and it is a little faster (9% faster in fact). So it is my preferred way now.
I am pretty new to programming and I have to do an Abstract Data Type (ADT) for integer numbers.
I've browsed the web for some tips, examples, tutorials but i couldn't find anything usefull, so i hope i will get here some answers.
I thinked a lot about how should i format the ADT that stores my integer and I'm thinking of something like this:
int lenght; // stores the length of the number(an limit since this numbers goes to infinite)
int[] digits; // stores the digits of my number, with the dimension equal to length
Now, I'm confused about how should i tackle the sign representation.Is it ok to hold the sign into an char something like: char sign?
But then comes the question what to do when I have to add and multiply two integers, what about the cases when i have overflows on this operations.
So , if some of you have some ideas about how should I represent the number(the format) and how should I do the multiply and add i would be very great full. I don't need any code, I i the learning stage just some ideas. Thank you.
One good way to do this is to store the sign as a bool (e.g. bool is_neg;). That way it's completely clear what that data means (vice with a char, where it's not entirely clear.
You might want to store each digit in an unsigned short (or if you want to be precise about sign, uint16_t). Then, when you do a multiply of two digits, you can just multiply them as unsigned ints (uint32_t), and then the low 16 bits are your result and the overflow is in the high 16 bits. You can then add this to the result array fairly easily. You know that the multiplication of a n-bit number by a k-bit number is at most n + k bits long, so you can preallocate your array to that size and then worry about removing extra zeros later.
Hope this helps, and let me know if you want more tips.
The first design decision you have to make is the choice of a basis.
You seem to lean towards plain decimal. Could be unpacked (one full byte per digit, numerical or ASCII representation), or packed digits pairs (Decimal Coded Binary, twice four bits in a byte).
Other schemes are more convenient for faster operations: basis being a power of 2 or a power of 10, fitting in a byte, a short, an int...
Powers of 10 have the benefit that conversion to and from base 10 can be done word by word.
Addition is an easy matter: add the words in pairs and handle the carries. Same for subtraction, with borrows.
Multiplies are a whole different story if you care about efficiency. The method of written computation taught at school can be used, but it requires length1 x length2 operations. For long numbers, more efficient methods are preferred (http://en.wikipedia.org/wiki/Multiplication_algorithm#Karatsuba_multiplication). They are also more complex.
I am implementing a BigInt class that must support arbitrary-precision operations on integers.
Quote from "The Algorithm Design Manual" by S.Skiena:
What base should I do [editor's note: arbitrary-precision] arithmetic in? - It is perhaps simplest to implement your own high-precision arithmetic package in decimal, and thus represent each integer as a string of base-10 digits. However, it is far more efficient to use a higher base, ideally equal to the square root of the largest integer supported fully by hardware arithmetic.
How do I find the largest integer supported fully by hardware arithmetic? If I understand correctly, being my machine an x64 based PC, the largest integer supported should be 2^64 (http://en.wikipedia.org/wiki/X86-64 - Architectural features: 64-bit integer capability), so I should use base 2^32, but is there a way in c++ to get this size programmatically so I can typedef my base_type to it?
You might be searching for std::uintmax_t and std::intmax_t.
static_cast<unsigned>(-1) is the max int. e.g. all bits set to 1 Is that what you are looking for ?
You can also use std::numeric_limits<unsigned>::max() or UINT_MAX, and all of these will yield the same result. and what these values tell is the maximum capacity of unsigned type. e.g. the maximum value that can be stored into unsigned type.
int (and, by extension, unsigned int) is the "natural" size for the architecture. So a type that has half the bits of an int should work reasonably well. Beyond that, you really need to configure for the particular hardware; the type of the storage unit and the type of the calculation unit should be typedefs in a header and their type selected to match the particular processor. Typically you'd make this selection after running some speed tests.
INT_MAX doesn't help here; it tells you the largest value that can be stored in an int, which may or may not be the largest value that the hardware can support directly. Similarly, INTMAX_MAX is no help, either; it tells you the largest value that can be stored as an integral type, but doesn't tell you whether operations on such a value can be done in hardware or require software emulation.
Back in the olden days, the rule of thumb was that operations on ints were done directly in hardware, and operations on longs were done as multiple integer operations, so operations on longs were much slower than operations on ints. That's no longer a good rule of thumb.
Things are not so black and white. There are MAY issues here, and you may have other things worth considering. I've now written two variable precision tools (in MATLAB, VPI and HPF) and I've chosen different approaches in each. It also matters whether you are writing an integer form or a high precision floating point form.
The difference is, integers can grow without bound in the number of digits. But if you are doing a floating point implementation with a user specified number of digits, you always know the number of digits in the mantissa. This is fixed.
First of all, it is simplest to use a single integer for each decimal digit. This makes many things work nicely, so I/O is easy. It is a bit inefficient in terms of storage though. Adds and subtracts are easy though. And if you use integers for each digit, then multiplies are even easy. In MATLAB for example, conv is pretty fast, though it is still O(n^2). I think gmp uses an fft multiply, so faster yet.
But assuming you use a basic conv multiply, then you need to worry about overflows for numbers with a huge number of digits. For example, suppose I store decimal digits as 8 bit signed integers. Using conv, followed by carries, I can do a multiply. For example, suppose I have the number 9999.
N = repmat(9,1,4)
N =
9 9 9 9
conv(N,N)
ans =
81 162 243 324 243 162 81
Thus even to form the product 9999*9999, I'd need to be careful as the digits will overflow an 8 bit signed integer. If I'm using 16 bit integers to accumulate the convolution products, then a multiply between a pair of 1000 digits integers can cause an overflow.
N = repmat(9,1,1000);
max(conv(N,N))
ans =
81000
So if you are worried about the possibility of millions of digits, you need to watch out.
One alternative is to use what I call migits, essentially working in a higher base than 10. Thus by using base 1000000 and doubles to store the elements, I can store 6 decimal digits per element. A convolution will still cause overflows for larger numbers though.
N = repmat(999999,1,10000);
log2(max(conv(N,N)))
ans =
53.151
Thus a convolution between two sets of base 1000000 migits that are 10000 migits in length (60000 decimal digits) will overflow the point where a double cannot represent an integer exactly.
So again, if you will use numbers with millions of digits, beware. A nice thing about the use of a higher base of migits with a convolution based multiply is since the conv operation is O(n^2), then going from base 10 to base 100 gives you a 4-1 speedup. Going to base 1000 yields a 9-1 speedup in the convolutions.
Finally, the use of a base other than 10 as migits makes it logical to implement guard digits (for floats.) In floating point arithmetic, you should never trust the least significant bits of a computation, so it makes sense to keep a few digits hidden in the shadows. So when I wrote my HPF tool, I gave the user control of how many digits would be carried along. This is not an issue for integers of course.
There are many other issues. I discuss them in the docs carried with those tools.
I'm using the GMP library to make a Pi program, that will calculate about 7 trillion digits of Pi. Problem is, I can't figure out how many bits are needed to hold that many decimal places.
7 trillion digits can represent any of 10^(7 trillion) distinct numbers.
x bits can represent 2^x distinct numbers.
So you want to solve:
2^x = 10^7000000000000
Take the log-base-2 of both sides:
x = log2(10^7000000000000)
Recall that log(a^b) = b * log(a):
x = 7000000000000 * log2(10)
I get 23253496664212 bits. I would add one or two more just to be safe. Good luck finding the petabytes to hold them, though.
I suspect you are going to need a more interesting algorithm.
I wanna just correct one thing about what was written in the response answer:
Recall that log(a^b) = a * log(b)
well it is the opposite :
log(a^b) = b * log(a)
2^10 = 1024, so ten bits will represent slightly more than three digits. Since you're talking about 7 trillion digits, that would be something like 23 trillion bits, or about 3 terabytes, which is more than I could get on one drive from Costco last I visited.
You may be getting overambitious. I'd wonder about the I/O time to read and write entire disks for each operation.
(The mathematical way to solve it is to use logarithms, since a number that takes 7 trillion digits to represent has a log base 10 of about 7 trillion. Find the log of the number in the existing base, convert the base, and you've got your answer. For shorthand between base 2 and base 10, use ten bits==three digits, because that's not very far wrong. It says that the log base 10 of 2 is .3, when it's actually more like .301.)
I was thinking about an algorithm in division of large numbers: dividing with remainder bigint C by bigint D, where we know the representation of C in base b, and D is of form b^k-1. It's probably the easiest to show it on an example. Let's try dividing C=21979182173 by D=999.
We write the number as sets of three digits: 21 979 182 173
We take sums (modulo 999) of consecutive sets, starting from the left: 21 001 183 356
We add 1 to those sets preceding the ones where we "went over 999": 22 001 183 356
Indeed, 21979182173/999=22001183 and remainder 356.
I've calculated the complexity and, if I'm not mistaken, the algorithm should work in O(n), n being the number of digits of C in base b representation. I've also done a very crude and unoptimized version of the algorithm (only for b=10) in C++, tested it against GMP's general integer division algorithm and it really does seem to fare better than GMP. I couldn't find anything like this implemented anywhere I looked, so I had to resort to testing it against general division.
I found several articles which discuss what seem to be quite similar matters, but none of them concentrate on actual implementations, especially in bases different than 2. I suppose that's because of the way numbers are internally stored, although the mentioned algorithm seems useful for, say, b=10, even taking that into account. I also tried contacting some other people, but, again, to no avail.
Thus, my question would be: is there an article or a book or something where the aforementioned algorithm is described, possibly discussing the implementations? If not, would it make sense for me to try and implement and test such an algorithm in, say, C/C++ or is this algorithm somehow inherently bad?
Also, I'm not a programmer and while I'm reasonably OK at programming, I admittedly don't have much knowledge of computer "internals". Thus, pardon my ignorance - it's highly possible there are one or more very stupid things in this post. Sorry once again.
Thanks a lot!
Further clarification of points raised in the comments/answers:
Thanks, everyone - as I didn't want to comment on all the great answers and advice with the same thing, I'd just like to address one point a lot of you touched on.
I am fully aware that working in bases 2^n is, generally speaking, clearly the most efficient way of doing things. Pretty much all bigint libraries use 2^32 or whatever. However, what if (and, I emphasize, it would be useful only for this particular algorithm!) we implement bigints as an array of digits in base b? Of course, we require b here to be "reasonable": b=10, the most natural case, seems reasonable enough. I know it's more or less inefficient both considering memory and time, taking into account how numbers are internally stored, but I have been able to, if my (basic and possibly somehow flawed) tests are correct, produce results faster than GMP's general division, which would give sense to implementing such an algorithm.
Ninefingers notices I'd have to use in that case an expensive modulo operation. I hope not: I can see if old+new crossed, say, 999, just by looking at the number of digits of old+new+1. If it has 4 digits, we're done. Even more, since old<999 and new<=999, we know that if old+new+1 has 4 digits (it can't have more), then, (old+new)%999 equals deleting the leftmost digit of (old+new+1), which I presume we can do cheaply.
Of course, I'm not disputing obvious limitations of this algorithm nor I claim it can't be improved - it can only divide with a certain class of numbers and we have to a priori know the representation of dividend in base b. However, for b=10, for instance, the latter seems natural.
Now, say we have implemented bignums as I outlined above. Say C=(a_1a_2...a_n) in base b and D=b^k-1. The algorithm (which could be probably much more optimized) would go like this. I hope there aren't many typos.
if k>n, we're obviously done
add a zero (i.e. a_0=0) at the beginning of C (just in case we try to divide, say, 9999 with 99)
l=n%k (mod for "regular" integers - shouldn't be too expensive)
old=(a_0...a_l) (the first set of digits, possibly with less than k digits)
for (i=l+1; i < n; i=i+k) (We will have floor(n/k) or so iterations)
new=(a_i...a_(i+k-1))
new=new+old (this is bigint addition, thus O(k))
aux=new+1 (again, bigint addition - O(k) - which I'm not happy about)
if aux has more than k digits
delete first digit of aux
old=old+1 (bigint addition once again)
fill old with zeroes at the beginning so it has as much digits as it should
(a_(i-k)...a_(i-1))=old (if i=l+1, (a _ 0...a _ l)=old)
new=aux
fill new with zeroes at the beginning so it has as much digits as it should
(a_i...a_(i+k-1)=new
quot=(a_0...a_(n-k+1))
rem=new
There, thanks for discussing this with me - as I said, this does seem to me to be an interesting "special case" algorithm to try to implement, test and discuss, if nobody sees any fatal flaws in it. If it's something not widely discussed so far, even better. Please, let me know what you think. Sorry about the long post.
Also, just a few more personal comments:
#Ninefingers: I actually have some (very basic!) knowledge of how GMP works, what it does and of general bigint division algorithms, so I was able to understand much of your argument. I'm also aware GMP is highly optimized and in a way customizes itself for different platforms, so I'm certainly not trying to "beat it" in general - that seems as much fruitful as attacking a tank with a pointed stick. However, that's not the idea of this algorithm - it works in very special cases (which GMP does not appear to cover). On an unrelated note, are you sure general divisions are done in O(n)? The most I've seen done is M(n). (And that can, if I understand correctly, in practice (Schönhage–Strassen etc.) not reach O(n). Fürer's algorithm, which still doesn't reach O(n), is, if I'm correct, almost purely theoretical.)
#Avi Berger: This doesn't actually seem to be exactly the same as "casting out nines", although the idea is similar. However, the aforementioned algorithm should work all the time, if I'm not mistaken.
Your algorithm is a variation of a base 10 algorithm known as "casting out nines". Your example is using base 1000 and "casting out" 999's (one less than the base). This used to be taught in elementary school as way to do a quick check on hand calculations. I had a high school math teacher who was horrified to learn that it wasn't being taught anymore and filled us in on it.
Casting out 999's in base 1000 won't work as a general division algorithm. It will generate values that are congruent modulo 999 to the actual quotient and remainder - not the actual values. Your algorithm is a bit different and I haven't checked if it works, but it is based on effectively using base 1000 and the divisor being 1 less than the base. If you wanted to try it for dividing by 47, you would have to convert to a base 48 number system first.
Google "casting out nines" for more information.
Edit: I originally read your post a bit too quickly, and you do know of this as a working algorithm. As #Ninefingers and #Karl Bielefeldt have stated more clearly than me in their comments, what you aren't including in your performance estimate is the conversion into a base appropriate for the particular divisor at hand.
I feel the need to add to this based on my comment. This isn't an answer, but an explanation as to the background.
A bignum library uses what are called limbs - search for mp_limb_t in the gmp source, which are usually a fixed-size integer field.
When you do something like addition, one way (albeit inefficient) to approach it is to do this:
doublelimb r = limb_a + limb_b + carryfrompreviousiteration
This double-sized limb catches the overflow of limb_a + limb_b in the case that the sum is bigger than the limb size. So if the total is bigger than 2^32 if we're using uint32_t as our limb size, the overflow can be caught.
Why do we need this? Well, what you typically do is loop through all the limbs - you've done this yourself in dividing your integer up and going through each one - but we do it LSL first (so the smallest limb first) just as you'd do arithmetic by hand.
This might seem inefficient, but this is just the C way of doing things. To really break out the big guns, x86 has adc as an instruction - add with carry. What this does is an arithmetic and on your fields and sets the carry bit if the arithmetic overflows the size of the register. The next time you do add or adc, the processor factors in the carry bit too. In subtraction it's called the borrow flag.
This also applies to shift operations. As such, this feature of the processor is crucial to what makes bignums fast. So the fact is, there's electronic circuitry in the chip for doing this stuff - doing it in software is always going to be slower.
Without going into too much detail, operations are built up from this ability to add, shift, subtract etc. They're crucial. Oh and you use the full width of your processor's register per limb if you're doing it right.
Second point - conversion between bases. You cannot take a value in the middle of a number and change it's base, because you can't account for the overflow from the digit beneath it in your original base, and that number can't account for the overflow from the digit beneath... and so on. In short, every time you want to change base, you need to convert the entire bignum from the original base to your new base back again. So you have to walk the bignum (all the limbs) three times at least. Or, alternatively, detect overflows expensively in all other operations... remember, now you need to do modulo operations to work out if you overflowed, whereas before the processor was doing it for us.
I should also like to add that whilst what you've got is probably quick for this case, bear in mind that as a bignum library gmp does a fair bit of work for you, like memory management. If you're using mpz_ you're using an abstraction above what I've described here, for starters. Finally, gmp uses hand optimised assembly with unrolled loops for just about every platform you've ever heard of, plus more. There's a very good reason it ships with Mathematica, Maple et al.
Now, just for reference, some reading material.
Modern Computer Arithmetic is a Knuth-like work for arbitrary precision libraries.
Donald Knuth, Seminumerical Algorithms (The Art of Computer Programming Volume II).
William Hart's blog on implementing algorithm's for bsdnt in which he discusses various division algorithms. If you're interested in bignum libraries, this is an excellent resource. I considered myself a good programmer until I started following this sort of stuff...
To sum it up for you: division assembly instructions suck, so people generally compute inverses and multiply instead, as you do when defining division in modular arithmetic. The various techniques that exist (see MCA) are mostly O(n).
Edit: Ok, not all of the techniques are O(n). Most of the techniques called div1 (dividing by something not bigger than a limb are O(n). When you go bigger you end up with O(n^2) complexity; this is hard to avoid.
Now, could you implement bigints as an array of digits? Well yes, of course you could. However, consider the idea just under addition
/* you wouldn't do this just before add, it's just to
show you the declaration.
*/
uint32_t* x = malloc(num_limbs*sizeof(uint32_t));
uint32_t* y = malloc(num_limbs*sizeof(uint32_t));
uint32_t* a = malloc(num_limbs*sizeof(uint32_t));
uint32_t m;
for ( i = 0; i < num_limbs; i++ )
{
m = 0;
uint64_t t = x[i] + y[i] + m;
/* now we need to work out if that overflowed at all */
if ( (t/somebase) >= 1 ) /* expensive division */
{
m = t % somebase; /* get the overflow */
}
}
/* frees somewhere */
That's a rough sketch of what you're looking at for addition via your scheme. So you have to run the conversion between bases. So you're going to need a conversion to your representation for the base, then back when you're done, because this form is just really slow everywhere else. We're not talking about the difference between O(n) and O(n^2) here, but we are talking about an expensive division instruction per limb or an expensive conversion every time you want to divide. See this.
Next up, how do you expand your division for general case division? By that, I mean when you want to divide those two numbers x and y from the above code. You can't, is the answer, without resorting to bignum-based facilities, which are expensive. See Knuth. Taking modulo a number greater than your size doesn't work.
Let me explain. Try 21979182173 mod 1099. Let's assume here for simplicity's sake that the biggest size field we can have is three digits. This is a contrived example, but the biggest field size I know if uses 128 bits using gcc extensions. Anyway, the point is, you:
21 979 182 173
Split your number into limbs. Then you take modulo and sum:
21 1000 1182 1355
It doesn't work. This is where Avi is correct, because this is a form of casting out nines, or an adaption thereof, but it doesn't work here because our fields have overflowed for a start - you're using the modulo to ensure each field stays within its limb/field size.
So what's the solution? Split your number up into a series of appropriately sized bignums? And start using bignum functions to calculate everything you need to? This is going to be much slower than any existing way of manipulating the fields directly.
Now perhaps you're only proposing this case for dividing by a limb, not a bignum, in which case it can work, but hensel division and precomputed inverses etc do to without the conversion requirement. I have no idea if this algorithm would be faster than say hensel division; it would be an interesting comparison; the problem comes with a common representation across the bignum library. The representation chosen in existing bignum libraries is for the reasons I've expanded on - it makes sense at the assembly level, where it was first done.
As a side note; you don't have to use uint32_t to represent your limbs. You use a size ideally the size of the registers of the system (say uint64_t) so that you can take advantage of assembly-optimised versions. So on a 64-bit system adc rax, rbx only sets the overflow (CF) if the result overspills 2^64 bits.
tl;dr version: the problem isn't your algorithm or idea; it's the problem of converting between bases, since the representation you need for your algorithm isn't the most efficient way to do it in add/sub/mul etc. To paraphrase knuth: This shows you the difference between mathematical elegance and computational efficiency.
If you need to frequently divide by the same divisor, using it (or a power of it) as your base makes division as cheap as bit-shifting is for base 2 binary integers.
You could use base 999 if you want; there's nothing special about using a power-of-10 base except that it makes conversion to decimal integer very cheap. (You can work one limb at a time instead of having to do a full division over the whole integer. It's like the difference between converting a binary integer to decimal vs. turning every 4 bits into a hex digit. Binary -> hex can start with the most significant bits, but converting to non-power-of-2 bases has to be LSB-first using division.)
For example, to compute the first 1000 decimal digits of Fibonacci(109) for a code-golf question with a performance requirement, my 105 bytes of x86 machine code answer used the same algorithm as this Python answer: the usual a+=b; b+=a Fibonacci iteration, but divide by (a power of) 10 every time a gets too large.
Fibonacci grows faster than carry propagates, so discarding the low decimal digits occasionally doesn't change the high digits long-term. (You keep a few extra beyond the precision you want).
Dividing by a power of 2 doesn't work, unless you keep track of how many powers of 2 you've discarded, because the eventual binary -> decimal conversion at the end would depend on that.
So for this algorithm, you have to do extended-precision addition, and division by 10 (or whatever power of 10 you want).
I stored base-109 limbs in 32-bit integer elements. Dividing by 109 is trivially cheap: just a pointer increment to skip the low limb. Instead of actually doing a memmove, I just offset the pointer used by the next add iteration.
I think division by a power of 10 other than 10^9 would be somewhat cheap, but would require an actual division on each limb, and propagating the remainder to the next limb.
Extended-precision addition is somewhat more expensive this way than with binary limbs, because I have to generate the carry-out manually with a compare: sum[i] = a[i] + b[i]; carry = sum < a; (unsigned comparison). And also manually wrap to 10^9 based on that compare, with a conditional-move instruction. But I was able to use that carry-out as an input to adc (x86 add-with-carry instruction).
You don't need a full modulo to handle the wrapping on addition, because you know you've wrapped at most once.
This wastes a just over 2 bits of each 32-bit limb: 10^9 instead of 2^32 = 4.29... * 10^9. Storing base-10 digits one per byte would be significantly less space efficient, and very much worse for performance, because an 8-bit binary addition costs the same as a 64-bit binary addition on a modern 64-bit CPU.
I was aiming for code-size: for pure performance I would have used 64-bit limbs holding base-10^19 "digits". (2^64 = 1.84... * 10^19, so this wastes less than 1 bit per 64.) This lets you get twice as much work done with each hardware add instruction. Hmm, actually this might be a problem: the sum of two limbs might wrap the 64-bit integer, so just checking for > 10^19 isn't sufficient anymore. You could work in base 5*10^18, or in base 10^18, or do more complicated carry-out detection that checks for binary carry as well as manual carry.
Storing packed BCD with one digit per 4 bit nibble would be even worse for performance, because there isn't hardware support for blocking carry from one nibble to the next within a byte.
Overall, my version ran about 10x faster than the Python extended-precision version on the same hardware (but it had room for significant optimization for speed, by dividing less often). (70 seconds or 80 seconds vs. 12 minutes)
Still, I think for this particular implementation of that algorithm (where I only needed addition and division, and division happened after every few additions), the choice of base-10^9 limbs was very good. There are much more efficient algorithms for the Nth Fibonacci number that don't need to do 1 billion extended-precision additions.