I have a strange problem in matching a pattern.
Consider the Perl code below
#!/usr/bin/perl -w
use strict;
my #Array = ("Hello|World","Good|Day");
function();
function();
function();
sub function
{
foreach my $pattern (#Array)
{
$pattern =~ /(\w+)\|(\w+)/g;
print $1."\n";
}
print "\n";
}
__END__
The output I expect should be
Hello
Good
Hello
Good
Hello
Good
But what I get is
Hello
Good
Use of uninitialized value $1 in concatenation (.) or string at D:\perlfiles\problem.pl li
ne 28.
Use of uninitialized value $1 in concatenation (.) or string at D:\perlfiles\problem.pl li
ne 28.
Hello
Good
What I observed was that the pattern matches alternatively.
Can someone explain me what is the problem regarding this code.
To fix this I changed the function subroutine to something like this:
sub function
{
my $string;
foreach my $pattern (#Array)
{
$string .= $pattern."\n";
}
while ($string =~ m/(\w+)\|(\w+)/g)
{
print $1."\n";
}
print "\n";
}
Now I get the output as expected.
It is the global /g modifier that is at work. It remembers the position of the last pattern match. When it reaches the end of the string, it starts over.
Remove the /g modifier, and it will act as you expect.
Related
Trying to check an array of strings against an array of regex 's.
Throws:
'Use of uninitialized value in $string in pattern match (m//) at myscript line '
If I take out the if statement, it still gives warning but prints each
element in the #string_list
foreach my $expr (#expr_list) {
foreach my $string (#string_list) {
if ($string =~ $expr) {
print $string,"\n"
}
}
}
That means one of the elements of #string_list is undef.
I want to match a variable character in a given string, but from the end.
Ideas on how to do this action?
for example:
sub removeCharFromEnd {
my $string = shift;
my $char = shift;
if($string =~ m/$char/){ // I want to match the char, searching from the end, $doesn't work
print "success";
}
}
Thank you for your assistance.
There is no regex modifier that would force Perl regex engine to parse the string from right to left. Thus, the most convenient way to achieve that is via a negative lookahead:
m/$char(?!.*$char)/
The (?!.*$char) negative lookahead will require the absence (=will fail the match if found) of a $char after any 0+ chars other than linebreak chars (use s modifier if you are running the regex against a multiline string input).
The regex engine works from left to right.
You can use the natural greediness of quantifiers to reach the end of the string and find the last char with the backtracking mechanism:
if($string =~ m/.*\K$char/s) { ...
\K marks the position of the match result beginning.
Other ways:
you can also reverse the string and use your previous pattern.
you can search all occurrences and take the last item in the list
I'm having trouble understanding what you want. Your subroutine is called removeCharFromEnd, so perhaps you want to remove $char from $string if it appears at the end of the string
You can do that like this
sub removeCharFromEnd {
my ( $string, $char ) = #_;
if ( $string =~ s/$char\z// ) {
print "success";
}
$string;
}
Or perhaps you want to remove the last occurrence of $char wherever it is. You can do that with
s/.*\K$char//
The subroutine I have written returns the modified string, so you would have to assign the result to a variable to save it. You can write
my $s = 'abc';
$s = removeCharFromEnd($s, 'c');
say $s;
output
ab
If you just want to modify the string in place then you should write
$ARGV[0] =~ s/$char\z//
using whichever substitution you choose. Then you can do this
my $s = 'abc';
removeCharFromEnd($s, 'c');
say $s;
This produces the same output
To get Perl to search from the end of a string, reverse the string.
sub removeCharFromEnd {
my $string = reverse shift #_;
my $char = quotemeta reverse shift #_;
$string =~ s/$char//;
$string = reverse $string;
return $string;
}
print removeCharFromEnd(qw( abcabc b )), "\n";
print removeCharFromEnd(qw( abcdefabcdef c )), "\n";
print removeCharFromEnd(qw( !"/$%?&*!"/$%?&* $ )), "\n";
I need to grep a value from an array.
For example i have a values
#a=('branches/Soft/a.txt', 'branches/Soft/h.cpp', branches/Main/utils.pl');
#Array = ('branches/Soft/a.txt', 'branches/Soft/h.cpp', branches/Main/utils.pl','branches/Soft/B2/c.tct', 'branches/Docs/A1/b.txt');
Now, i need to loop #a and find each value matches to #Array. For Example
It works for me with grep. You'd do it the exact same way as in the More::ListUtils example below, except for having grep instead of any. You can also shorten it to
my $got_it = grep { /$str/ } #paths;
my #matches = grep { /$str/ } #paths;
This by default tests with /m against $_, each element of the list in turn. The $str and #paths are the same as below.
You can use the module More::ListUtils as well. Its function any returns true/false depending on whether the condition in the block is satisfied for any element in the list, ie. whether there was a match in this case.
use warnings;
use strict;
use Most::ListUtils;
my $str = 'branches/Soft/a.txt';
my #paths = ('branches/Soft/a.txt', 'branches/Soft/b.txt',
'branches/Docs/A1/b.txt', 'branches/Soft/B2/c.tct');
my $got_match = any { $_ =~ m/$str/ } #paths;
With the list above, containing the $str, the $got_match is 1.
Or you can roll it by hand and catch the match as well
foreach my $p (#paths) {
print "Found it: $1\n" if $p =~ m/($str)/;
}
This does print out the match.
Note that the strings you show in your example do not contain the one to match. I added it to my list for a test. Without it in the list no match is found in either of the examples.
To test for more than one string, with the added sample
my #strings = ('branches/Soft/a.txt', 'branches/Soft/h.cpp', 'branches/Main/utils.pl');
my #paths = ('branches/Soft/a.txt', 'branches/Soft/h.cpp', 'branches/Main/utils.pl',
'branches/Soft/B2/c.tct', 'branches/Docs/A1/b.txt');
foreach my $str (#strings) {
foreach my $p (#paths) {
print "Found it: $1\n" if $p =~ m/($str)/;
}
# Or, instead of the foreach loop above use
# my $match = grep { /$str/ } #paths;
# print "Matched for $str\n" if $match;
}
This prints
Found it: branches/Soft/a.txt
Found it: branches/Soft/h.cpp
Found it: branches/Main/utils.pl
When the lines with grep are uncommented and foreach ones commented out I get the corresponding prints for the same strings.
The slashes dot in $a will pose a problem so you either have to escape them it when doing regex match or use a simple eq to find the matches:
Regex match with $a escaped:
my #matches = grep { /\Q$a\E/ } #array;
Simple comparison with "equals":
my #matches = grep { $_ eq $a } #array;
With your sample data both will give an empty array #matches because there is no match.
This Solved My Question. Thanks to all especially #zdim for the valuable time and support
my #SVNFILES = ('branches/Soft/a.txt', 'branches/Soft/b.txt');
my #paths = ('branches/Soft/a.txt', 'branches/Soft/b.txt',
'branches/Docs/A1/b.txt', 'branches/Soft/B2/c.tct');
foreach my $svn (#SVNFILES)
{
chomp ($svn);
my $m = grep { /$svn/ } (#paths);
if ( $m eq '0' ) {
print "Files Mismatch\n";
exit 1;
}
}
You should escape characters like '/' and '.' in any regex when you need it as a character.
Likewise :
$a="branches\/Soft\/a\.txt"
Retry whatever you did with either grep or perl with that. If it still doesn't work, tell us precisely what you tried.
I am using the following code to search for a substring and print it out with a few characters before and after it. Somehow Perl takes issue with me using $1 and complains about
Use of uninitialized value $1 in concatenation (.) or string.
I cannot figure out why...can you?
use List::Util qw[min max];
my $word = "test";
my $lines = "this is just a test to find something out";
my $context = 3;
while ($lines =~ m/\b$word\b/g ) { # as long as pattern is found...
print "$word\ ";
print "$1";
print substr ($lines, max(pos($lines)-length($1)-$context, 0), length($1)+$context); # check: am I possibly violating any boundaries here
}
You have to capture $word into regex group $1 by using parentheses,
while ($lines =~ m/\b($word)\b/g)
When you use $1, you are asking the code to use the first captured group from the regex and since your regex doesn't have any, well, that variable won't exist.
You can either refer to the whole match with $& or you add a capture group to your regex and keep using $1.
i.e. Either:
use List::Util qw[min max];
my $word = "test";
my $lines = "this is just a test to find something out";
my $context = 3;
while ($lines =~ m/\b$word\b/g ) { # as long as pattern is found...
print "$word\ ";
print "$&";
print substr ($lines, max(pos($lines)-length($&)-$context, 0), length($&)+$context); # check: am I possibly violating any boundaries here
}
Or
use List::Util qw[min max];
my $word = "test";
my $lines = "this is just a test to find something out";
my $context = 3;
while ($lines =~ m/(\b$word\b)/g ) { # as long as pattern is found...
print "$word\ ";
print "$1";
print substr ($lines, max(pos($lines)-length($1)-$context, 0), length($1)+$context); # check: am I possibly violating any boundaries here
}
Note: It doesn't matter whether you use (\b$word\b) or (\b$word)\b or \b($word\b) or \b($word)\b here because \b is a 'string' of 0 length.
When you want to address a matched part in regex, put it in parenthes. Than you'll be able to address this mathced part via $1 variable (for first pair of parenthes), $2 (for the second pair) and so on.
The values $1, $2 and so on hold the strings found by capture groups. When a match is performed all of these variables are set to undef. The code in the question does not have any capture groups and hence $1 is never given a value, it is undefined.
Running the code below shows the effect. Initially $1, $2 and $3 are not defined. The first match sets $1 and $2 but not $3. The second match sets only $1 but not that $2 is cleared to be undefined. The third match has no capture groups and all three are undefined.
use strict;
use warnings;
sub show
{
printf "\$1: %s\n", (defined $1 ? $1 : "-undef-");
printf "\$2: %s\n", (defined $2 ? $2 : "-undef-");
printf "\$3: %s\n", (defined $3 ? $3 : "-undef-");
print "\n";
}
my $text = "abcdefghij";
show();
$text =~ m/ab(cd)ef(gh)ij/; # First match
show();
$text =~ m/ab(cd)efghij/; # Second match
show();
$text =~ m/abcdefghij/; # Third match
show();
$1 will have no value unless you are actually capturing something.
You can adjust your boundary collection method to using lookahead and lookbehinds.
use strict;
use warnings;
my $lines = "this is just a test to find something out";
my $word = "test";
my $extra = 10;
while ($lines =~ m/(?:(?<=(.{$extra}))|(.{0,$extra}))\b(\Q$word\E)\b(?=(.{0,$extra}))/gs ) {
my $pre = $1 // $2;
my $word = $3;
my $post = $4;
print "'...$pre<$word>$post...'\n";
}
Outputs:
'...is just a <test> to find s...'
I want to search the lines of a file to see if any of them match one of a set of regexs.
something like this:
my #regs = (qr/a/, qr/b/, qr/c/);
foreach my $line (<ARGV>) {
foreach my $reg (#regs) {
if ($line =~ /$reg/) {
printf("matched %s\n", $reg);
}
}
}
but this can be slow.
it seems like the regex compiler could help. Is there an optimization like this:
my $master_reg = join("|", #regs); # this is wrong syntax. what's the right way?
foreach my $line (<ARGV>) {
$line =~ /$master_reg/;
my $matched = special_function();
printf("matched the %sth reg: %s\n", $matched, $regs[$matched]
}
}
where 'special_function' is the special sauce telling me which portion of the regex was matched.
Use capturing parentheses. Basic idea looks like this:
my #matches = $foo =~ /(one)|(two)|(three)/;
defined $matches[0]
and print "Matched 'one'\n";
defined $matches[1]
and print "Matched 'two'\n";
defined $matches[2]
and print "Matched 'three'\n";
Add capturing groups:
"pear" =~ /(a)|(b)|(c)/;
if (defined $1) {
print "Matched a\n";
} elsif (defined $2) {
print "Matched b\n";
} elsif (defined $3) {
print "Matched c\n";
} else {
print "No match\n";
}
Obviously in this simple example you could have used /(a|b|c)/ just as well and just printed $1, but when 'a', 'b', and 'c' can be arbitrarily complex expressions this is a win.
If you're building up the regex programmatically you might find it painful to have to use the numbered variables, so instead of breaking strictness, look in the #- or #+ arrays instead, which contain offsets for each match position. $-[0] is always set as long as the pattern matched at all, but higher $-[$n] will only contain defined values if the nth capturing group matched.