Related
For a parameter pack I need a macro which can take any number of parameters (types actually), which works cross platform. This code works nicely with GCC, LLVM and MSVC (after the preprocessor had been reworked to support the ## sequence (see Behavior 4 [comma elision in variadic macros]
):
class A {};
class B: A {};
class C: A {};
class D: A {};
template<typename... Interfaces>
class Aggregator: public Interfaces... {
};
#define INNER(...) typedef Aggregator<__VA_ARGS__> AGG;
#define ENVIRONMENT(...) INNER(B, C, ## __VA_ARGS__)
ENVIRONMENT(D)
The problem here is the empty-parameters case (ENVIRONMENT()). As I cannot use C++20 yet (which comes with the __VA_OPT__() token sequence, I have to find a solution that requires at most C++17. GCC + LLVM have no problem with an empty parameter list, however MSVC insists on at least one parameter for the comma elision to work.
What is required to make this construct also work fully with MSVC?
Update: It turns out the empty-parameter case doesn't work for GCC either: https://godbolt.org/z/1zKZO- .
Here's an approach that actually does what you asked for... I've predefined this to work with MSVC, gcc, and clang (to work with just gcc and clang, or just MSVC, would be simpler).
This implements OPTIONAL, which expects a tuple (parenthesized tokens) as the first argument. When OPTIONAL is called with just an empty second argument, it expands to nothing; otherwise, it will expand to the unwrapped version of the first argument. The end result is a kind of analog to (but certainly not equivalent to) C++20's __VA_OPT__.
The following is the OPTIONAL implementation, and support macros:
#define GLUE(A,B) GLUE_C(GLUE_I,(A,B))
#define GLUE_C(A,B) A B
#define GLUE_I(A,B) A##B
#define FIRST(...) FIRST_C(FIRST_I,(__VA_ARGS__,))
#define FIRST_C(A,B) A B
#define FIRST_I(X,...) X
#define THIRD(...) THIRD_C(THIRD_CC,(THIRD_I,(__VA_ARGS__,,,)))
#define THIRD_C(A,B) A B
#define THIRD_CC(A,B) A B
#define THIRD_I(A,B,C,...) C
#define COUNT(...) COUNT_C(COUNT_I,(__VA_ARGS__,9,8,7,6,5,4,3,2,1,))
#define COUNT_C(A,B) A B
#define COUNT_I(_,_9,_8,_7,_6,_5,_4,_3,_2,X,...) X
#define DISCARD_ARGUMENTS(...)
#define OPTIONAL(APPLY_,...) \
THIRD(GLUE(OPTIONAL_SHIFT_IF_1_IS_,COUNT(__VA_ARGS__)),\
OPTIONAL_SINGLE_CASE,\
APPLY_OPTION) \
(APPLY_,__VA_ARGS__)
#define OPTIONAL_SHIFT_IF_1_IS_1 ,
#define OPTIONAL_SINGLE_CASE(APPLY_,...) \
THIRD(OPTIONAL_SHIFT_TEST __VA_ARGS__ (0_UNLOCK), \
DISCARD_ARGUMENTS, \
APPLY_OPTION)(APPLY_,)
#define OPTIONAL_SHIFT_TEST(...) GLUE(OPTIONAL_APPLY_SHIFT_TEST_,FIRST(__VA_ARGS__))
#define OPTIONAL_APPLY_SHIFT_TEST_0_UNLOCK ,
#define APPLY_OPTION(A,...) APPLY_OPTION_C(APPLY_OPTION_I,A)
#define APPLY_OPTION_C(A,B) A B
#define APPLY_OPTION_I(...) __VA_ARGS__
The core mechanism is an "indirect third macro"; the idea here is to generate a first argument that applies some "test" which, if something of interest shows up, generates a comma, which shifts the second argument to the third position just prior to selection.
This is used twice by OPTIONAL; if there's one argument, there's a next stage test to see if that argument has no tokens. This test injects the argument's tokens between OPTIONAL_SHIFT_TEST and (0_UNLOCK); if there are no tokens, that makes a call, and this macro will generate an object macro that creates the shifting comma. This indirection is intentional, allowing parentheses to be in the first argument without a false detection (see demo).
What is required to make this construct also work fully with MSVC?
...built into the indirection layers of all macros are "caller macros"; here, they all have _C in the name, take two parameters A and B, and simply expand to A B; their use is always to separate a macro name from a macro argument set. Those address MSVC. Were I actually trying to target MSVC (for whatever reason), only one such caller would be necessary; by making a caller for each macro set, however, we get to make this work for MSVC and gcc/clang as well. (ETA: THIRD requires two caller indirections; once for the varying arguments in third itself, and the other to properly interpret the expanded first argument's commas, since that's the whole point of the THIRD macro).
Note that this doesn't rely on any of the compiler specific comma elision tricks.
Finally... with OPTIONAL in place, all you need to do is this:
#define INNER(...) typedef Aggregator<__VA_ARGS__> AGG;
#define ENVIRONMENT(...) INNER(B, C OPTIONAL((,),__VA_ARGS__) __VA_ARGS__)
Godbolt demos
gcc/clang: https://godbolt.org/z/GK3Huh
MSVC: https://godbolt.org/z/kvRPau
what about something like this?
template <class... X>
using INNER = Aggregator<B, C, X...>;
#define ENVIRONMENT(...) typedef INNER<__VA_ARGS__> AGG
ENVIRONMENT(); // Or ENVIRONMENT(D)
Hope this helps...
Closed. This question needs to be more focused. It is not currently accepting answers.
Want to improve this question? Update the question so it focuses on one problem only by editing this post.
Closed 4 years ago.
Improve this question
The C preprocessor is justifiably feared and shunned by the C++ community. In-lined functions, consts and templates are usually a safer and superior alternative to a #define.
The following macro:
#define SUCCEEDED(hr) ((HRESULT)(hr) >= 0)
is in no way superior to the type safe:
inline bool succeeded(int hr) { return hr >= 0; }
But macros do have their place, please list the uses you find for macros that you can't do without the preprocessor.
Please put each use-cases in a seperate answer so it can be voted up and if you know of how to achieve one of the answers without the preprosessor point out how in that answer's comments.
As wrappers for debug functions, to automatically pass things like __FILE__, __LINE__, etc:
#ifdef ( DEBUG )
#define M_DebugLog( msg ) std::cout << __FILE__ << ":" << __LINE__ << ": " << msg
#else
#define M_DebugLog( msg )
#endif
Since C++20 the magic type std::source_location can however be used instead of __LINE__ and __FILE__ to implement an analogue as a normal function (template).
Methods must always be complete, compilable code; macros may be code fragments. Thus you can define a foreach macro:
#define foreach(list, index) for(index = 0; index < list.size(); index++)
And use it as thus:
foreach(cookies, i)
printf("Cookie: %s", cookies[i]);
Since C++11, this is superseded by the range-based for loop.
Header file guards necessitate macros.
Are there any other areas that necessitate macros? Not many (if any).
Are there any other situations that benefit from macros? YES!!!
One place I use macros is with very repetitive code. For example, when wrapping C++ code to be used with other interfaces (.NET, COM, Python, etc...), I need to catch different types of exceptions. Here's how I do that:
#define HANDLE_EXCEPTIONS \
catch (::mylib::exception& e) { \
throw gcnew MyDotNetLib::Exception(e); \
} \
catch (::std::exception& e) { \
throw gcnew MyDotNetLib::Exception(e, __LINE__, __FILE__); \
} \
catch (...) { \
throw gcnew MyDotNetLib::UnknownException(__LINE__, __FILE__); \
}
I have to put these catches in every wrapper function. Rather than type out the full catch blocks each time, I just type:
void Foo()
{
try {
::mylib::Foo()
}
HANDLE_EXCEPTIONS
}
This also makes maintenance easier. If I ever have to add a new exception type, there's only one place I need to add it.
There are other useful examples too: many of which include the __FILE__ and __LINE__ preprocessor macros.
Anyway, macros are very useful when used correctly. Macros are not evil -- their misuse is evil.
Mostly:
Include guards
Conditional compilation
Reporting (predefined macros like __LINE__ and __FILE__)
(rarely) Duplicating repetitive code patterns.
In your competitor's code.
Inside conditional compilation, to overcome issues of differences between compilers:
#ifdef WE_ARE_ON_WIN32
#define close(parm1) _close (parm1)
#define rmdir(parm1) _rmdir (parm1)
#define mkdir(parm1, parm2) _mkdir (parm1)
#define access(parm1, parm2) _access(parm1, parm2)
#define create(parm1, parm2) _creat (parm1, parm2)
#define unlink(parm1) _unlink(parm1)
#endif
When you want to make a string out of an expression, the best example for this is assert (#x turns the value of x to a string).
#define ASSERT_THROW(condition) \
if (!(condition)) \
throw std::exception(#condition " is false");
String constants are sometimes better defined as macros since you can do more with string literals than with a const char *.
e.g. String literals can be easily concatenated.
#define BASE_HKEY "Software\\Microsoft\\Internet Explorer\\"
// Now we can concat with other literals
RegOpenKey(HKEY_CURRENT_USER, BASE_HKEY "Settings", &settings);
RegOpenKey(HKEY_CURRENT_USER, BASE_HKEY "TypedURLs", &URLs);
If a const char * were used then some sort of string class would have to be used to perform the concatenation at runtime:
const char* BaseHkey = "Software\\Microsoft\\Internet Explorer\\";
RegOpenKey(HKEY_CURRENT_USER, (string(BaseHkey) + "Settings").c_str(), &settings);
RegOpenKey(HKEY_CURRENT_USER, (string(BaseHkey) + "TypedURLs").c_str(), &URLs);
Since C++20 it is however possible to implement a string-like class type that can be used as a non-type template parameter type of a user-defined string literal operator which allows such concatenation operations at compile-time without macros.
When you want to change the program flow (return, break and continue) code in a function behaves differently than code that is actually inlined in the function.
#define ASSERT_RETURN(condition, ret_val) \
if (!(condition)) { \
assert(false && #condition); \
return ret_val; }
// should really be in a do { } while(false) but that's another discussion.
The obvious include guards
#ifndef MYHEADER_H
#define MYHEADER_H
...
#endif
Let's say we'll ignore obvious things like header guards.
Sometimes, you want to generate code that needs to be copy/pasted by the precompiler:
#define RAISE_ERROR_STL(p_strMessage) \
do \
{ \
try \
{ \
std::tstringstream strBuffer ; \
strBuffer << p_strMessage ; \
strMessage = strBuffer.str() ; \
raiseSomeAlert(__FILE__, __FUNCSIG__, __LINE__, strBuffer.str().c_str()) \
} \
catch(...){} \
{ \
} \
} \
while(false)
which enables you to code this:
RAISE_ERROR_STL("Hello... The following values " << i << " and " << j << " are wrong") ;
And can generate messages like:
Error Raised:
====================================
File : MyFile.cpp, line 225
Function : MyFunction(int, double)
Message : "Hello... The following values 23 and 12 are wrong"
Note that mixing templates with macros can lead to even better results (i.e. automatically generating the values side-by-side with their variable names)
Other times, you need the __FILE__ and/or the __LINE__ of some code, to generate debug info, for example. The following is a classic for Visual C++:
#define WRNG_PRIVATE_STR2(z) #z
#define WRNG_PRIVATE_STR1(x) WRNG_PRIVATE_STR2(x)
#define WRNG __FILE__ "("WRNG_PRIVATE_STR1(__LINE__)") : ------------ : "
As with the following code:
#pragma message(WRNG "Hello World")
it generates messages like:
C:\my_project\my_cpp_file.cpp (225) : ------------ Hello World
Other times, you need to generate code using the # and ## concatenation operators, like generating getters and setters for a property (this is for quite a limited cases, through).
Other times, you will generate code than won't compile if used through a function, like:
#define MY_TRY try{
#define MY_CATCH } catch(...) {
#define MY_END_TRY }
Which can be used as
MY_TRY
doSomethingDangerous() ;
MY_CATCH
tryToRecoverEvenWithoutMeaningfullInfo() ;
damnThoseMacros() ;
MY_END_TRY
(still, I only saw this kind of code rightly used once)
Last, but not least, the famous boost::foreach !!!
#include <string>
#include <iostream>
#include <boost/foreach.hpp>
int main()
{
std::string hello( "Hello, world!" );
BOOST_FOREACH( char ch, hello )
{
std::cout << ch;
}
return 0;
}
(Note: code copy/pasted from the boost homepage)
Which is (IMHO) way better than std::for_each.
So, macros are always useful because they are outside the normal compiler rules. But I find that most the time I see one, they are effectively remains of C code never translated into proper C++.
Unit test frameworks for C++ like UnitTest++ pretty much revolve around preprocessor macros. A few lines of unit test code expand into a hierarchy of classes that wouldn't be fun at all to type manually. Without something like UnitTest++ and it's preprocessor magic, I don't know how you'd efficiently write unit tests for C++.
You can't perform short-circuiting of function call arguments using a regular function call. For example:
#define andm(a, b) (a) && (b)
bool andf(bool a, bool b) { return a && b; }
andm(x, y) // short circuits the operator so if x is false, y would not be evaluated
andf(x, y) // y will always be evaluated
To fear the C preprocessor is like to fear the incandescent bulbs just because we get fluorescent bulbs. Yes, the former can be {electricity | programmer time} inefficient. Yes, you can get (literally) burned by them. But they can get the job done if you properly handle it.
When you program embedded systems, C uses to be the only option apart form assembler. After programming on desktop with C++ and then switching to smaller, embedded targets, you learn to stop worrying about “inelegancies” of so many bare C features (macros included) and just trying to figure out the best and safe usage you can get from those features.
Alexander Stepanov says:
When we program in C++ we should not be ashamed of its C heritage, but make
full use of it. The only problems with C++, and even the only problems with C, arise
when they themselves are not consistent with their own logic.
Some very advanced and useful stuff can still be built using preprocessor (macros), which you would never be able to do using the c++ "language constructs" including templates.
Examples:
Making something both a C identifier and a string
Easy way to use variables of enum types as string in C
Boost Preprocessor Metaprogramming
We use the __FILE__ and __LINE__ macros for diagnostic purposes in information rich exception throwing, catching and logging, together with automated log file scanners in our QA infrastructure.
For instance, a throwing macro OUR_OWN_THROW might be used with exception type and constructor parameters for that exception, including a textual description. Like this:
OUR_OWN_THROW(InvalidOperationException, (L"Uninitialized foo!"));
This macro will of course throw the InvalidOperationException exception with the description as constructor parameter, but it'll also write a message to a log file consisting of the file name and line number where the throw occured and its textual description. The thrown exception will get an id, which also gets logged. If the exception is ever caught somewhere else in the code, it will be marked as such and the log file will then indicate that that specific exception has been handled and that it's therefore not likely the cause of any crash that might be logged later on. Unhandled exceptions can be easily picked up by our automated QA infrastructure.
Code repetition.
Have a look to boost preprocessor library, it's a kind of meta-meta-programming. In topic->motivation you can find a good example.
One common use is for detecting the compile environment, for cross-platform development you can write one set of code for linux, say, and another for windows when no cross platform library already exists for your purposes.
So, in a rough example a cross-platform mutex can have
void lock()
{
#ifdef WIN32
EnterCriticalSection(...)
#endif
#ifdef POSIX
pthread_mutex_lock(...)
#endif
}
For functions, they are useful when you want to explicitly ignore type safety. Such as the many examples above and below for doing ASSERT. Of course, like a lot of C/C++ features you can shoot yourself in the foot, but the language gives you the tools and lets you decide what to do.
I occasionally use macros so I can define information in one place, but use it in different ways in different parts of the code. It's only slightly evil :)
For example, in "field_list.h":
/*
* List of fields, names and values.
*/
FIELD(EXAMPLE1, "first example", 10)
FIELD(EXAMPLE2, "second example", 96)
FIELD(ANOTHER, "more stuff", 32)
...
#undef FIELD
Then for a public enum it can be defined to just use the name:
#define FIELD(name, desc, value) FIELD_ ## name,
typedef field_ {
#include "field_list.h"
FIELD_MAX
} field_en;
And in a private init function, all the fields can be used to populate a table with the data:
#define FIELD(name, desc, value) \
table[FIELD_ ## name].desc = desc; \
table[FIELD_ ## name].value = value;
#include "field_list.h"
Something like
void debugAssert(bool val, const char* file, int lineNumber);
#define assert(x) debugAssert(x,__FILE__,__LINE__);
So that you can just for example have
assert(n == true);
and get the source file name and line number of the problem printed out to your log if n is false.
If you use a normal function call such as
void assert(bool val);
instead of the macro, all you can get is your assert function's line number printed to the log, which would be less useful.
#define ARRAY_SIZE(arr) (sizeof arr / sizeof arr[0])
Unlike the 'preferred' template solution discussed in a current thread, you can use it as a constant expression:
char src[23];
int dest[ARRAY_SIZE(src)];
You can use #defines to help with debugging and unit test scenarios. For example, create special logging variants of the memory functions and create a special memlog_preinclude.h:
#define malloc memlog_malloc
#define calloc memlog calloc
#define free memlog_free
Compile you code using:
gcc -Imemlog_preinclude.h ...
An link in your memlog.o to the final image. You now control malloc, etc, perhaps for logging purposes, or to simulate allocation failures for unit tests.
When you are making a decision at compile time over Compiler/OS/Hardware specific behavior.
It allows you to make your interface to Comppiler/OS/Hardware specific features.
#if defined(MY_OS1) && defined(MY_HARDWARE1)
#define MY_ACTION(a,b,c) doSothing_OS1HW1(a,b,c);}
#elif define(MY_OS1) && defined(MY_HARDWARE2)
#define MY_ACTION(a,b,c) doSomthing_OS1HW2(a,b,c);}
#elif define(MY_SUPER_OS)
/* On this hardware it is a null operation */
#define MY_ACTION(a,b,c)
#else
#error "PLEASE DEFINE MY_ACTION() for this Compiler/OS/HArdware configuration"
#endif
Compilers can refuse your request to inline.
Macros will always have their place.
Something I find useful is #define DEBUG for debug tracing -- you can leave it 1 while debugging a problem (or even leave it on during the whole development cycle) then turn it off when it is time to ship.
You can #define constants on the compiler command line using the -D or /D option. This is often useful when cross-compiling the same software for multiple platforms because you can have your makefiles control what constants are defined for each platform.
In my last job, I was working on a virus scanner. To make thing easier for me to debug, I had lots of logging stuck all over the place, but in a high demand app like that, the expense of a function call is just too expensive. So, I came up with this little Macro, that still allowed me to enable the debug logging on a release version at a customers site, without the cost of a function call would check the debug flag and just return without logging anything, or if enabled, would do the logging... The macro was defined as follows:
#define dbgmsg(_FORMAT, ...) if((debugmsg_flag & 0x00000001) || (debugmsg_flag & 0x80000000)) { log_dbgmsg(_FORMAT, __VA_ARGS__); }
Because of the VA_ARGS in the log functions, this was a good case for a macro like this.
Before that, I used a macro in a high security application that needed to tell the user that they didn't have the correct access, and it would tell them what flag they needed.
The Macro(s) defined as:
#define SECURITY_CHECK(lRequiredSecRoles) if(!DoSecurityCheck(lRequiredSecRoles, #lRequiredSecRoles, true)) return
#define SECURITY_CHECK_QUIET(lRequiredSecRoles) (DoSecurityCheck(lRequiredSecRoles, #lRequiredSecRoles, false))
Then, we could just sprinkle the checks all over the UI, and it would tell you which roles were allowed to perform the action you tried to do, if you didn't already have that role. The reason for two of them was to return a value in some places, and return from a void function in others...
SECURITY_CHECK(ROLE_BUSINESS_INFORMATION_STEWARD | ROLE_WORKER_ADMINISTRATOR);
LRESULT CAddPerson1::OnWizardNext()
{
if(m_Role.GetItemData(m_Role.GetCurSel()) == parent->ROLE_EMPLOYEE) {
SECURITY_CHECK(ROLE_WORKER_ADMINISTRATOR | ROLE_BUSINESS_INFORMATION_STEWARD ) -1;
} else if(m_Role.GetItemData(m_Role.GetCurSel()) == parent->ROLE_CONTINGENT) {
SECURITY_CHECK(ROLE_CONTINGENT_WORKER_ADMINISTRATOR | ROLE_BUSINESS_INFORMATION_STEWARD | ROLE_WORKER_ADMINISTRATOR) -1;
}
...
Anyways, that's how I've used them, and I'm not sure how this could have been helped with templates... Other than that, I try to avoid them, unless REALLY necessary.
I use macros to easily define Exceptions:
DEF_EXCEPTION(RessourceNotFound, "Ressource not found")
where DEF_EXCEPTION is
#define DEF_EXCEPTION(A, B) class A : public exception\
{\
public:\
virtual const char* what() const throw()\
{\
return B;\
};\
}\
If you have a list of fields that get used for a bunch of things, e.g. defining a structure, serializing that structure to/from some binary format, doing database inserts, etc, then you can (recursively!) use the preprocessor to avoid ever repeating your field list.
This is admittedly hideous. But maybe sometimes better than updating a long list of fields in multiple places? I've used this technique exactly once, and it was quite helpful that one time.
Of course the same general idea is used extensively in languages with proper reflection -- just instrospect the class and operate on each field in turn. Doing it in the C preprocessor is fragile, illegible, and not always portable. So I mention it with some trepidation. Nonetheless, here it is...
(EDIT: I see now that this is similar to what #Andrew Johnson said on 9/18; however the idea of recursively including the same file takes the idea a bit further.)
// file foo.h, defines class Foo and various members on it without ever repeating the
// list of fields.
#if defined( FIELD_LIST )
// here's the actual list of fields in the class. If FIELD_LIST is defined, we're at
// the 3rd level of inclusion and somebody wants to actually use the field list. In order
// to do so, they will have defined the macros STRING and INT before including us.
STRING( fooString )
INT( barInt )
#else // defined( FIELD_LIST )
#if !defined(FOO_H)
#define FOO_H
#define DEFINE_STRUCT
// recursively include this same file to define class Foo
#include "foo.h"
#undef DEFINE_STRUCT
#define DEFINE_CLEAR
// recursively include this same file to define method Foo::clear
#include "foo.h"
#undef DEFINE_CLEAR
// etc ... many more interesting examples like serialization
#else // defined(FOO_H)
// from here on, we know that FOO_H was defined, in other words we're at the second level of
// recursive inclusion, and the file is being used to make some particular
// use of the field list, for example defining the class or a single method of it
#if defined( DEFINE_STRUCT )
#define STRING(a) std::string a;
#define INT(a) long a;
class Foo
{
public:
#define FIELD_LIST
// recursively include the same file (for the third time!) to get fields
// This is going to translate into:
// std::string fooString;
// int barInt;
#include "foo.h"
#endif
void clear();
};
#undef STRING
#undef INT
#endif // defined(DEFINE_STRUCT)
#if defined( DEFINE_ZERO )
#define STRING(a) a = "";
#define INT(a) a = 0;
#define FIELD_LIST
void Foo::clear()
{
// recursively include the same file (for the third time!) to get fields.
// This is going to translate into:
// fooString="";
// barInt=0;
#include "foo.h"
#undef STRING
#undef int
}
#endif // defined( DEFINE_ZERO )
// etc...
#endif // end else clause for defined( FOO_H )
#endif // end else clause for defined( FIELD_LIST )
I've used the preprocesser to calculate fixed-point numbers from floating point values used in embedded systems that cannot use floating point in the compiled code. It's handy to have all of your math in Real World Units and not have to think about them in fixed-point.
Example:
// TICKS_PER_UNIT is defined in floating point to allow the conversions to compute during compile-time.
#define TICKS_PER_UNIT 1024.0
// NOTE: The TICKS_PER_x_MS will produce constants in the preprocessor. The (long) cast will
// guarantee there are no floating point values in the embedded code and will produce a warning
// if the constant is larger than the data type being stored to.
// Adding 0.5 sec to the calculation forces rounding instead of truncation.
#define TICKS_PER_1_MS( ms ) (long)( ( ( ms * TICKS_PER_UNIT ) / 1000 ) + 0.5 )
Yet another foreach macros. T: type, c: container, i: iterator
#define foreach(T, c, i) for(T::iterator i=(c).begin(); i!=(c).end(); ++i)
#define foreach_const(T, c, i) for(T::const_iterator i=(c).begin(); i!=(c).end(); ++i)
Usage (concept showing, not real):
void MultiplyEveryElementInList(std::list<int>& ints, int mul)
{
foreach(std::list<int>, ints, i)
(*i) *= mul;
}
int GetSumOfList(const std::list<int>& ints)
{
int ret = 0;
foreach_const(std::list<int>, ints, i)
ret += *i;
return ret;
}
Better implementations available: Google "BOOST_FOREACH"
Good articles available: Conditional Love: FOREACH Redux (Eric Niebler) http://www.artima.com/cppsource/foreach.html
Maybe the greates usage of macros is in platform-independent development.
Think about cases of type inconsistency - with macros, you can simply use different header files -- like:
--WIN_TYPES.H
typedef ...some struct
--POSIX_TYPES.h
typedef ...some another struct
--program.h
#ifdef WIN32
#define TYPES_H "WINTYPES.H"
#else
#define TYPES_H "POSIX_TYPES.H"
#endif
#include TYPES_H
Much readable than implementing it in other ways, to my opinion.
#include < iostream >
#define MY_CHK_DEF(flag) \
#ifdef (flag) \
std::cout<<#flag<<std::endl; \
#else \
std::cout<<#flag<<" ,flag not define"<<std::endl; \
#endif
int main()
{
MY_CHK_DEF(FLAG_1);
MY_CHK_DEF(FLAG_2);
MY_CHK_DEF(FLAG_3);
...
}
complier report:
main.cpp:3:24: error: '#' is not followed by a macro parameter
any ideas?
Thanks
You can't do it. #if, #else, and #endif must be the first tokens on the logical line. Your definition is just one logical line, so it doesn't work,
You have to do it the other way round(defining the macro for each #if/#ifdef/#else condition(if you nest you have to put a definition on each branch). You probably should define it at every logical branch or it will fail to compile when you try to adjust a rarely adjusted flag. You can #define noops like this. Note to be careful not to wrap expressions with side effects into #define 'd macros that reduce to a noop when the debug flag is on, or your program may not work right.
#define N(x)
#include < iostream >
#ifdef (flag)
#define MY_CHK_DEF(flag)
std::cout<<#flag<<std::endl;
#else
#define MY_CHK_DEF(flag) \
std::cout<<#flag<<" ,flag not define"<<std::endl;
#endif
int main()
{
MY_CHK_DEF(FLAG_1);
MY_CHK_DEF(FLAG_2);
MY_CHK_DEF(FLAG_3);
...
}
C preprocessor is single-pass and #define creates a pretty dumb replacement that isn't further processed - your MY_CHK_DEF(flag) macro inserts the #if statement inline into preprocessed code that is interpreted by C compiler and not valid C.
You can either rephrase it to be one-pass, or if you can't, run through preprocessor twice, manually - once through cpp -P and the second time through normal compilation process.
You actually can do this if you use BOOST processor header lib.. it provides a BOOST_PP_IF macro allow this type of decisions.
http://www.boost.org/doc/libs/1_53_0/libs/preprocessor/doc/ref/if.html
I'm often use do-while(0) construct in my #defines, for the reasons described in this answer. Also I'm trying to use as high as possible warning level from compiler to catch more potential problem and make my code more robust and cross-platform. So I'm typically using -Wall with gcc and /Wall with MSVC.
Unfortunately MSVC complain about do-while(0) construct:
foo.c(36) : warning C4127: conditional expression is constant
What should I do about this warning?
Just disable it globally for all files? It does not seems to be good idea for me.
Summary: This warning (C4127) in this particular case is a subtle compiler bug. Feel free to disable it.
In depth:
It was meant to catch situations when logical expression evaluates to a constant in non-obvious situations (such as, if(a==a && a!=a), and somehow, it turned while(true) and other useful constructs into invalid.
Microsoft recommends using for(;;) for infinite loop if you want to have this warning on, and there is no solution for your case. This is one of very few Level-4 warnings my company's development conventions allow to disable.
Perhaps your code needs more owls:
do { stuff(); } while (0,0)
Or the less photogenic but also less warning producing:
do { stuff(); } while ((void)0,0)
As Michael Burr noted in Carl Smotricz' answer, for Visual Studio 2008+ you can use __pragma:
#define MYMACRO(f,g) \
__pragma(warning(push)) \
__pragma(warning(disable:4127)) \
do { f; g; } while (0) \
__pragma(warning(pop))
You can put it on one line (without the \s) if you prefer macros to be unreadable.
I have a pattern that I based off an answer here & it works on clang, gcc & MSVC. I'm posting it here in the hopes that it'll be useful for others & because the answers here helped me formulate it.
#ifdef WIN32
# define ONCE __pragma( warning(push) ) \
__pragma( warning(disable:4127) ) \
while( 0 ) \
__pragma( warning(pop) )
#else
# define ONCE while( 0 )
#endif
And I use it like this:
do {
// Some stuff
} ONCE;
You can use this in macros too:
void SomeLogImpl( const char* filename, int line, ... );
#ifdef NDEBUG
# define LOG( ... )
#else
# define LOG( ... ) do { \
SomeLogImpl( __FILE__, __LINE__, __VA_ARGS__ ); \
} ONCE
#endif
This also works for the case pointed out above, if F uses 'ONCE' in a function:
#define F( x ) do { f(x); } ONCE
...
if (a==b) F(bar); else someFunc();
Edit: Years later, I realize I forgot to add the pattern I actually wrote this macro for - the "switch-like-a-goto" pattern:
do {
begin_some_operation();
if( something_is_wrong ) {
break;
}
continue_big_operation();
if( another_failure_cond ) {
break;
}
finish_big_operation();
return SUCCESS;
} ONCE;
cleanup_the_mess();
return FAILURE;
This gives you a try/finally-ish construct that's more structured than a crufty goto to your cleanup & return code. Using this ONCE macro instead of while(0) shuts VS up.
Using newer versions of the MS compiler, you can use warning suppression:
#define MY_MACRO(stuff) \
do { \
stuff \
__pragma(warning(suppress:4127)) \
} while(0)
You can also push/disable/pop, but suppress is a much more convenient mechanism.
This compiler bug was fixed in Visual Studio 2015 Update 1, even if the releases notes don't mention it.
The bug was explained in one of the previous answers though:
Summary: This warning (C4127) in this particular case is a subtle compiler bug. Feel free to disable it.
It was meant to catch situations when logical expression evaluates to a constant in non-obvious situations (such as, if(a==a && a!=a), and somehow, it turned while(true) and other useful constructs into invalid.
Here's another possible approach, which avoids C4127, C4548 and C6319 (VS2013 code analysis warning), and doesn't require macros or pragmas:
static const struct {
inline operator bool() const { return false; }
} false_value;
do {
// ...
} while (false_value);
This optimises away, and compiles without warnings in GCC 4.9.2 and VS2013. In practice it could go in a namespace.
The warning is due to the while(false). This site gives an example of how to workaround this problem. Example from site (you'll have to re-work it for your code):
#define MULTI_LINE_MACRO_BEGIN do {
#define MULTI_LINE_MACRO_END \
__pragma(warning(push)) \
__pragma(warning(disable:4127)) \
} while(0) \
__pragma(warning(pop))
#define MULTI_LINE_MACRO \
MULTI_LINE_MACRO_BEGIN \
std::printf("Hello "); \
std::printf("world!\n"); \
MULTI_LINE_MACRO_END
Just insert your code between the BEGIN and END.
You can use
do {
// Anything you like
} WHILE_FALSE;
And earlier define WHILE_FALSE macro as follows:
#define WHILE_FALSE \
__pragma(warning(push)) \
__pragma(warning(disable:4127)) \
while(false) \
__pragma(warning(pop))
Verified on MSVC++2013.
This "while(0)" stuff is a hack and has just turned around to bite you.
Does your compiler offer #pragmas for selectively and locally turning off specific error messages? If so, that might be a sensible alternative.
#define STUFF for (bool b = true; b;) do {f(); g(); b = false;} while (b)?
#define STUFF for (;;) {f(); g(); break;}?
You can use comma operator instead of do-while(0) construct for multi-statement macro to be used in expressions. So instead of:
#define FOO(...) do { Statement1; Statement2; Statement3; } while(0)
Use:
#define FOO(...) (Statement1, Statement2, Statement3)
This works independently from the platform and allows to avoid compiler warning (even if highest warning level is selected).
Note that in comma containing macro (second FOO) the result of the last statement (Statement3) would be the result of entire macro.
I found this to be the shortest version
do {
// ...
}
while (([]() { return 0; })()) /* workaround for MSVC warning C4172 : conditional expression is constant */
Haven't checked to see if it is optimized away by the compiler, but I would guess it is.
You could use for loop as:
for (;;) {
// code
break;
}
Macro:
#define BEGIN \
for (;;) {
#define END \
break; }
I must say, I've never bothered with the do..while construct in macros. All code in my macros is itself included in braces, but without the do-..while. For example:
#define F(x) \
{ \
x++; \
} \
int main() {
int a = 1;
F(a);
printf( "%d\n", a );
}
Also, my own coding standard (and informal practice for years) has been to make all blocks, wherever they occur be enclosed in braces, which also more or less removes the problem.
There is a solution but it will add more cycles to your code. Don't use explicit value in the while condition.
You can make it like this:
file1.h
extern const int I_am_a_zero;
#define MY_MACRO(foo,bar) \
do \
{ \
} \
while(I_am_a_zero);
the variable I_am_a_zero should be defined in some .c file.
Anyway this warning doesn't show up in GCC :)
See this related question.
You can use #pragma warning to:
save the state
disable the warning
write the offending code
return the warning to their previous state
(you need a # before the pragmas, but SO is having a hard time dealing with them and formatting at the same time)
#pragma warning( push )
#pragma warning( disable: 4127 )
// Your code
#pragma warning( pop )
You want to push/pop the warnings rather then disable/enable because you do not want to interfere with the command line arguments that might be chosen to turn warnings on/off (someone may use the command line to turn off the warning, you do not want to force it back on... the code above deals with that).
This is better than turning the warning off globally since you can control it just for the part you want. Also you can make it part of the macro.
Well, for me, the following works without the C4127 warning:
#define ALWAYS_TRUE(zzsome) ((##zzsome)==(##zzsome))
void foo()
{
int a = 0;
while( ALWAYS_TRUE(a) )
{
}
}
Ofcourse, compilers are smart and zzsome should not be a constant
This will disable the warning and compiler will still be able to optimize the code:
static inline bool to_bool(const bool v) { return v; }
if (to_bool(0)) { // no warning here
dead_code(); // will be compiled out (by most compilers)
}
do { something(); } while(to_bool(0)); // no extra code generated
I'd use
for(int i = 0; i < 1; ++i) //do once
{
}
This is equivalent to
do
{
}while(0);
and yields no warnings.
Please use compiler switch /wd"4127" to disable this warning in your project.
Closed. This question needs to be more focused. It is not currently accepting answers.
Want to improve this question? Update the question so it focuses on one problem only by editing this post.
Closed 4 years ago.
Improve this question
The C preprocessor is justifiably feared and shunned by the C++ community. In-lined functions, consts and templates are usually a safer and superior alternative to a #define.
The following macro:
#define SUCCEEDED(hr) ((HRESULT)(hr) >= 0)
is in no way superior to the type safe:
inline bool succeeded(int hr) { return hr >= 0; }
But macros do have their place, please list the uses you find for macros that you can't do without the preprocessor.
Please put each use-cases in a seperate answer so it can be voted up and if you know of how to achieve one of the answers without the preprosessor point out how in that answer's comments.
As wrappers for debug functions, to automatically pass things like __FILE__, __LINE__, etc:
#ifdef ( DEBUG )
#define M_DebugLog( msg ) std::cout << __FILE__ << ":" << __LINE__ << ": " << msg
#else
#define M_DebugLog( msg )
#endif
Since C++20 the magic type std::source_location can however be used instead of __LINE__ and __FILE__ to implement an analogue as a normal function (template).
Methods must always be complete, compilable code; macros may be code fragments. Thus you can define a foreach macro:
#define foreach(list, index) for(index = 0; index < list.size(); index++)
And use it as thus:
foreach(cookies, i)
printf("Cookie: %s", cookies[i]);
Since C++11, this is superseded by the range-based for loop.
Header file guards necessitate macros.
Are there any other areas that necessitate macros? Not many (if any).
Are there any other situations that benefit from macros? YES!!!
One place I use macros is with very repetitive code. For example, when wrapping C++ code to be used with other interfaces (.NET, COM, Python, etc...), I need to catch different types of exceptions. Here's how I do that:
#define HANDLE_EXCEPTIONS \
catch (::mylib::exception& e) { \
throw gcnew MyDotNetLib::Exception(e); \
} \
catch (::std::exception& e) { \
throw gcnew MyDotNetLib::Exception(e, __LINE__, __FILE__); \
} \
catch (...) { \
throw gcnew MyDotNetLib::UnknownException(__LINE__, __FILE__); \
}
I have to put these catches in every wrapper function. Rather than type out the full catch blocks each time, I just type:
void Foo()
{
try {
::mylib::Foo()
}
HANDLE_EXCEPTIONS
}
This also makes maintenance easier. If I ever have to add a new exception type, there's only one place I need to add it.
There are other useful examples too: many of which include the __FILE__ and __LINE__ preprocessor macros.
Anyway, macros are very useful when used correctly. Macros are not evil -- their misuse is evil.
Mostly:
Include guards
Conditional compilation
Reporting (predefined macros like __LINE__ and __FILE__)
(rarely) Duplicating repetitive code patterns.
In your competitor's code.
Inside conditional compilation, to overcome issues of differences between compilers:
#ifdef WE_ARE_ON_WIN32
#define close(parm1) _close (parm1)
#define rmdir(parm1) _rmdir (parm1)
#define mkdir(parm1, parm2) _mkdir (parm1)
#define access(parm1, parm2) _access(parm1, parm2)
#define create(parm1, parm2) _creat (parm1, parm2)
#define unlink(parm1) _unlink(parm1)
#endif
When you want to make a string out of an expression, the best example for this is assert (#x turns the value of x to a string).
#define ASSERT_THROW(condition) \
if (!(condition)) \
throw std::exception(#condition " is false");
String constants are sometimes better defined as macros since you can do more with string literals than with a const char *.
e.g. String literals can be easily concatenated.
#define BASE_HKEY "Software\\Microsoft\\Internet Explorer\\"
// Now we can concat with other literals
RegOpenKey(HKEY_CURRENT_USER, BASE_HKEY "Settings", &settings);
RegOpenKey(HKEY_CURRENT_USER, BASE_HKEY "TypedURLs", &URLs);
If a const char * were used then some sort of string class would have to be used to perform the concatenation at runtime:
const char* BaseHkey = "Software\\Microsoft\\Internet Explorer\\";
RegOpenKey(HKEY_CURRENT_USER, (string(BaseHkey) + "Settings").c_str(), &settings);
RegOpenKey(HKEY_CURRENT_USER, (string(BaseHkey) + "TypedURLs").c_str(), &URLs);
Since C++20 it is however possible to implement a string-like class type that can be used as a non-type template parameter type of a user-defined string literal operator which allows such concatenation operations at compile-time without macros.
When you want to change the program flow (return, break and continue) code in a function behaves differently than code that is actually inlined in the function.
#define ASSERT_RETURN(condition, ret_val) \
if (!(condition)) { \
assert(false && #condition); \
return ret_val; }
// should really be in a do { } while(false) but that's another discussion.
The obvious include guards
#ifndef MYHEADER_H
#define MYHEADER_H
...
#endif
Let's say we'll ignore obvious things like header guards.
Sometimes, you want to generate code that needs to be copy/pasted by the precompiler:
#define RAISE_ERROR_STL(p_strMessage) \
do \
{ \
try \
{ \
std::tstringstream strBuffer ; \
strBuffer << p_strMessage ; \
strMessage = strBuffer.str() ; \
raiseSomeAlert(__FILE__, __FUNCSIG__, __LINE__, strBuffer.str().c_str()) \
} \
catch(...){} \
{ \
} \
} \
while(false)
which enables you to code this:
RAISE_ERROR_STL("Hello... The following values " << i << " and " << j << " are wrong") ;
And can generate messages like:
Error Raised:
====================================
File : MyFile.cpp, line 225
Function : MyFunction(int, double)
Message : "Hello... The following values 23 and 12 are wrong"
Note that mixing templates with macros can lead to even better results (i.e. automatically generating the values side-by-side with their variable names)
Other times, you need the __FILE__ and/or the __LINE__ of some code, to generate debug info, for example. The following is a classic for Visual C++:
#define WRNG_PRIVATE_STR2(z) #z
#define WRNG_PRIVATE_STR1(x) WRNG_PRIVATE_STR2(x)
#define WRNG __FILE__ "("WRNG_PRIVATE_STR1(__LINE__)") : ------------ : "
As with the following code:
#pragma message(WRNG "Hello World")
it generates messages like:
C:\my_project\my_cpp_file.cpp (225) : ------------ Hello World
Other times, you need to generate code using the # and ## concatenation operators, like generating getters and setters for a property (this is for quite a limited cases, through).
Other times, you will generate code than won't compile if used through a function, like:
#define MY_TRY try{
#define MY_CATCH } catch(...) {
#define MY_END_TRY }
Which can be used as
MY_TRY
doSomethingDangerous() ;
MY_CATCH
tryToRecoverEvenWithoutMeaningfullInfo() ;
damnThoseMacros() ;
MY_END_TRY
(still, I only saw this kind of code rightly used once)
Last, but not least, the famous boost::foreach !!!
#include <string>
#include <iostream>
#include <boost/foreach.hpp>
int main()
{
std::string hello( "Hello, world!" );
BOOST_FOREACH( char ch, hello )
{
std::cout << ch;
}
return 0;
}
(Note: code copy/pasted from the boost homepage)
Which is (IMHO) way better than std::for_each.
So, macros are always useful because they are outside the normal compiler rules. But I find that most the time I see one, they are effectively remains of C code never translated into proper C++.
Unit test frameworks for C++ like UnitTest++ pretty much revolve around preprocessor macros. A few lines of unit test code expand into a hierarchy of classes that wouldn't be fun at all to type manually. Without something like UnitTest++ and it's preprocessor magic, I don't know how you'd efficiently write unit tests for C++.
You can't perform short-circuiting of function call arguments using a regular function call. For example:
#define andm(a, b) (a) && (b)
bool andf(bool a, bool b) { return a && b; }
andm(x, y) // short circuits the operator so if x is false, y would not be evaluated
andf(x, y) // y will always be evaluated
To fear the C preprocessor is like to fear the incandescent bulbs just because we get fluorescent bulbs. Yes, the former can be {electricity | programmer time} inefficient. Yes, you can get (literally) burned by them. But they can get the job done if you properly handle it.
When you program embedded systems, C uses to be the only option apart form assembler. After programming on desktop with C++ and then switching to smaller, embedded targets, you learn to stop worrying about “inelegancies” of so many bare C features (macros included) and just trying to figure out the best and safe usage you can get from those features.
Alexander Stepanov says:
When we program in C++ we should not be ashamed of its C heritage, but make
full use of it. The only problems with C++, and even the only problems with C, arise
when they themselves are not consistent with their own logic.
Some very advanced and useful stuff can still be built using preprocessor (macros), which you would never be able to do using the c++ "language constructs" including templates.
Examples:
Making something both a C identifier and a string
Easy way to use variables of enum types as string in C
Boost Preprocessor Metaprogramming
We use the __FILE__ and __LINE__ macros for diagnostic purposes in information rich exception throwing, catching and logging, together with automated log file scanners in our QA infrastructure.
For instance, a throwing macro OUR_OWN_THROW might be used with exception type and constructor parameters for that exception, including a textual description. Like this:
OUR_OWN_THROW(InvalidOperationException, (L"Uninitialized foo!"));
This macro will of course throw the InvalidOperationException exception with the description as constructor parameter, but it'll also write a message to a log file consisting of the file name and line number where the throw occured and its textual description. The thrown exception will get an id, which also gets logged. If the exception is ever caught somewhere else in the code, it will be marked as such and the log file will then indicate that that specific exception has been handled and that it's therefore not likely the cause of any crash that might be logged later on. Unhandled exceptions can be easily picked up by our automated QA infrastructure.
Code repetition.
Have a look to boost preprocessor library, it's a kind of meta-meta-programming. In topic->motivation you can find a good example.
One common use is for detecting the compile environment, for cross-platform development you can write one set of code for linux, say, and another for windows when no cross platform library already exists for your purposes.
So, in a rough example a cross-platform mutex can have
void lock()
{
#ifdef WIN32
EnterCriticalSection(...)
#endif
#ifdef POSIX
pthread_mutex_lock(...)
#endif
}
For functions, they are useful when you want to explicitly ignore type safety. Such as the many examples above and below for doing ASSERT. Of course, like a lot of C/C++ features you can shoot yourself in the foot, but the language gives you the tools and lets you decide what to do.
I occasionally use macros so I can define information in one place, but use it in different ways in different parts of the code. It's only slightly evil :)
For example, in "field_list.h":
/*
* List of fields, names and values.
*/
FIELD(EXAMPLE1, "first example", 10)
FIELD(EXAMPLE2, "second example", 96)
FIELD(ANOTHER, "more stuff", 32)
...
#undef FIELD
Then for a public enum it can be defined to just use the name:
#define FIELD(name, desc, value) FIELD_ ## name,
typedef field_ {
#include "field_list.h"
FIELD_MAX
} field_en;
And in a private init function, all the fields can be used to populate a table with the data:
#define FIELD(name, desc, value) \
table[FIELD_ ## name].desc = desc; \
table[FIELD_ ## name].value = value;
#include "field_list.h"
Something like
void debugAssert(bool val, const char* file, int lineNumber);
#define assert(x) debugAssert(x,__FILE__,__LINE__);
So that you can just for example have
assert(n == true);
and get the source file name and line number of the problem printed out to your log if n is false.
If you use a normal function call such as
void assert(bool val);
instead of the macro, all you can get is your assert function's line number printed to the log, which would be less useful.
#define ARRAY_SIZE(arr) (sizeof arr / sizeof arr[0])
Unlike the 'preferred' template solution discussed in a current thread, you can use it as a constant expression:
char src[23];
int dest[ARRAY_SIZE(src)];
You can use #defines to help with debugging and unit test scenarios. For example, create special logging variants of the memory functions and create a special memlog_preinclude.h:
#define malloc memlog_malloc
#define calloc memlog calloc
#define free memlog_free
Compile you code using:
gcc -Imemlog_preinclude.h ...
An link in your memlog.o to the final image. You now control malloc, etc, perhaps for logging purposes, or to simulate allocation failures for unit tests.
When you are making a decision at compile time over Compiler/OS/Hardware specific behavior.
It allows you to make your interface to Comppiler/OS/Hardware specific features.
#if defined(MY_OS1) && defined(MY_HARDWARE1)
#define MY_ACTION(a,b,c) doSothing_OS1HW1(a,b,c);}
#elif define(MY_OS1) && defined(MY_HARDWARE2)
#define MY_ACTION(a,b,c) doSomthing_OS1HW2(a,b,c);}
#elif define(MY_SUPER_OS)
/* On this hardware it is a null operation */
#define MY_ACTION(a,b,c)
#else
#error "PLEASE DEFINE MY_ACTION() for this Compiler/OS/HArdware configuration"
#endif
Compilers can refuse your request to inline.
Macros will always have their place.
Something I find useful is #define DEBUG for debug tracing -- you can leave it 1 while debugging a problem (or even leave it on during the whole development cycle) then turn it off when it is time to ship.
You can #define constants on the compiler command line using the -D or /D option. This is often useful when cross-compiling the same software for multiple platforms because you can have your makefiles control what constants are defined for each platform.
In my last job, I was working on a virus scanner. To make thing easier for me to debug, I had lots of logging stuck all over the place, but in a high demand app like that, the expense of a function call is just too expensive. So, I came up with this little Macro, that still allowed me to enable the debug logging on a release version at a customers site, without the cost of a function call would check the debug flag and just return without logging anything, or if enabled, would do the logging... The macro was defined as follows:
#define dbgmsg(_FORMAT, ...) if((debugmsg_flag & 0x00000001) || (debugmsg_flag & 0x80000000)) { log_dbgmsg(_FORMAT, __VA_ARGS__); }
Because of the VA_ARGS in the log functions, this was a good case for a macro like this.
Before that, I used a macro in a high security application that needed to tell the user that they didn't have the correct access, and it would tell them what flag they needed.
The Macro(s) defined as:
#define SECURITY_CHECK(lRequiredSecRoles) if(!DoSecurityCheck(lRequiredSecRoles, #lRequiredSecRoles, true)) return
#define SECURITY_CHECK_QUIET(lRequiredSecRoles) (DoSecurityCheck(lRequiredSecRoles, #lRequiredSecRoles, false))
Then, we could just sprinkle the checks all over the UI, and it would tell you which roles were allowed to perform the action you tried to do, if you didn't already have that role. The reason for two of them was to return a value in some places, and return from a void function in others...
SECURITY_CHECK(ROLE_BUSINESS_INFORMATION_STEWARD | ROLE_WORKER_ADMINISTRATOR);
LRESULT CAddPerson1::OnWizardNext()
{
if(m_Role.GetItemData(m_Role.GetCurSel()) == parent->ROLE_EMPLOYEE) {
SECURITY_CHECK(ROLE_WORKER_ADMINISTRATOR | ROLE_BUSINESS_INFORMATION_STEWARD ) -1;
} else if(m_Role.GetItemData(m_Role.GetCurSel()) == parent->ROLE_CONTINGENT) {
SECURITY_CHECK(ROLE_CONTINGENT_WORKER_ADMINISTRATOR | ROLE_BUSINESS_INFORMATION_STEWARD | ROLE_WORKER_ADMINISTRATOR) -1;
}
...
Anyways, that's how I've used them, and I'm not sure how this could have been helped with templates... Other than that, I try to avoid them, unless REALLY necessary.
I use macros to easily define Exceptions:
DEF_EXCEPTION(RessourceNotFound, "Ressource not found")
where DEF_EXCEPTION is
#define DEF_EXCEPTION(A, B) class A : public exception\
{\
public:\
virtual const char* what() const throw()\
{\
return B;\
};\
}\
If you have a list of fields that get used for a bunch of things, e.g. defining a structure, serializing that structure to/from some binary format, doing database inserts, etc, then you can (recursively!) use the preprocessor to avoid ever repeating your field list.
This is admittedly hideous. But maybe sometimes better than updating a long list of fields in multiple places? I've used this technique exactly once, and it was quite helpful that one time.
Of course the same general idea is used extensively in languages with proper reflection -- just instrospect the class and operate on each field in turn. Doing it in the C preprocessor is fragile, illegible, and not always portable. So I mention it with some trepidation. Nonetheless, here it is...
(EDIT: I see now that this is similar to what #Andrew Johnson said on 9/18; however the idea of recursively including the same file takes the idea a bit further.)
// file foo.h, defines class Foo and various members on it without ever repeating the
// list of fields.
#if defined( FIELD_LIST )
// here's the actual list of fields in the class. If FIELD_LIST is defined, we're at
// the 3rd level of inclusion and somebody wants to actually use the field list. In order
// to do so, they will have defined the macros STRING and INT before including us.
STRING( fooString )
INT( barInt )
#else // defined( FIELD_LIST )
#if !defined(FOO_H)
#define FOO_H
#define DEFINE_STRUCT
// recursively include this same file to define class Foo
#include "foo.h"
#undef DEFINE_STRUCT
#define DEFINE_CLEAR
// recursively include this same file to define method Foo::clear
#include "foo.h"
#undef DEFINE_CLEAR
// etc ... many more interesting examples like serialization
#else // defined(FOO_H)
// from here on, we know that FOO_H was defined, in other words we're at the second level of
// recursive inclusion, and the file is being used to make some particular
// use of the field list, for example defining the class or a single method of it
#if defined( DEFINE_STRUCT )
#define STRING(a) std::string a;
#define INT(a) long a;
class Foo
{
public:
#define FIELD_LIST
// recursively include the same file (for the third time!) to get fields
// This is going to translate into:
// std::string fooString;
// int barInt;
#include "foo.h"
#endif
void clear();
};
#undef STRING
#undef INT
#endif // defined(DEFINE_STRUCT)
#if defined( DEFINE_ZERO )
#define STRING(a) a = "";
#define INT(a) a = 0;
#define FIELD_LIST
void Foo::clear()
{
// recursively include the same file (for the third time!) to get fields.
// This is going to translate into:
// fooString="";
// barInt=0;
#include "foo.h"
#undef STRING
#undef int
}
#endif // defined( DEFINE_ZERO )
// etc...
#endif // end else clause for defined( FOO_H )
#endif // end else clause for defined( FIELD_LIST )
I've used the preprocesser to calculate fixed-point numbers from floating point values used in embedded systems that cannot use floating point in the compiled code. It's handy to have all of your math in Real World Units and not have to think about them in fixed-point.
Example:
// TICKS_PER_UNIT is defined in floating point to allow the conversions to compute during compile-time.
#define TICKS_PER_UNIT 1024.0
// NOTE: The TICKS_PER_x_MS will produce constants in the preprocessor. The (long) cast will
// guarantee there are no floating point values in the embedded code and will produce a warning
// if the constant is larger than the data type being stored to.
// Adding 0.5 sec to the calculation forces rounding instead of truncation.
#define TICKS_PER_1_MS( ms ) (long)( ( ( ms * TICKS_PER_UNIT ) / 1000 ) + 0.5 )
Yet another foreach macros. T: type, c: container, i: iterator
#define foreach(T, c, i) for(T::iterator i=(c).begin(); i!=(c).end(); ++i)
#define foreach_const(T, c, i) for(T::const_iterator i=(c).begin(); i!=(c).end(); ++i)
Usage (concept showing, not real):
void MultiplyEveryElementInList(std::list<int>& ints, int mul)
{
foreach(std::list<int>, ints, i)
(*i) *= mul;
}
int GetSumOfList(const std::list<int>& ints)
{
int ret = 0;
foreach_const(std::list<int>, ints, i)
ret += *i;
return ret;
}
Better implementations available: Google "BOOST_FOREACH"
Good articles available: Conditional Love: FOREACH Redux (Eric Niebler) http://www.artima.com/cppsource/foreach.html
Maybe the greates usage of macros is in platform-independent development.
Think about cases of type inconsistency - with macros, you can simply use different header files -- like:
--WIN_TYPES.H
typedef ...some struct
--POSIX_TYPES.h
typedef ...some another struct
--program.h
#ifdef WIN32
#define TYPES_H "WINTYPES.H"
#else
#define TYPES_H "POSIX_TYPES.H"
#endif
#include TYPES_H
Much readable than implementing it in other ways, to my opinion.