I've spent all night researching this without a solution.
I'm trying to verify the digital signature of a file in the drives folder (C:\Windows\System32\drivers*.sys) pick whatever one you want. I know that the code is correct because if you move the file from that folder to C:\ the test works.
WinVerifyTrust gives error 80092003
http://pastebin.com/nLR7rvZe
CryptQueryObject gives error 80092009
http://pastebin.com/45Ra6eL4
What's the deal?
0x80092003 = CRYPT_E_FILE_ERROR = An error occurred while reading or writing to the file.
0x80092009 = CRYPT_E_NO_MATCH = No match when trying to find the object.
I'm guessing you're running on a 64-bit machine and WOW64 file system redirection is redirecting you to syswow64\drivers, which is empty. You can disable redirection with Wow64DisableWow64FsRedirection().
if you right click and view properties of file can you see a digital signature? most likely your file is part of a catalogue and you need to use the catalogue API to extract the cert from cert DB and verify it.
Related
I have a container that is built to run selenium-chromedriver with python to download an excel(.xlsx) file from a website.
I am Using SAM to build & deploy this image to be run in AWS Lambda.
When I build the container and invoke it locally, the program executes as expected: The download occurs and I can see the file placed in the root directory of the container.
The problem is: when I deploy this image to AWS and invoke my lambda function I get no errors, however, my download is never executed. The file never appears in my root directory.
My first thought was that maybe I didn't allocate enough memory to the lambda instance. I gave it 512 MB, and the logs said it was using 416MB. Maybe there wasn't enough room to fit another file inside? So I have increased the memory provided to 1024 MB, but still no luck.
My next thought was that maybe the download was just taking a long time, so I also allowed the program to wait for 5 minutes after clicking the download to ensure that the download is given time to complete. Still no luck.
I have also tried setting the following options for chromedriver (full list of chromedriver options posted at bottom):
options.add_argument(f"--user-data-dir={'/tmp'}"),
options.add_argument(f"--data-path={'/tmp'}"),
options.add_argument(f"--disk-cache-dir={'/tmp'}")
and also setting tempfolder = mkdtemp() and passing that into the chrome options as above in place of /tmp. Still no luck.
Since this applicaton is in a container, it should run the same locally as it does on AWS. So I am wondering if it is part of the config outside of the container that is blocking my ability to download a file? Maybe the request is going out but the response is not being allowed back in?
Please let me know if there is anything I need to clarify -- Any help on this issue is greatly appreciated!
Full list of Chromedriver options
options.binary_location = '/opt/chrome/chrome'
options.headless = True
options.add_argument('--disable-extensions')
options.add_argument('--no-first-run')
options.add_argument('--ignore-certificate-errors')
options.add_argument('--disable-client-side-phishing-detection')
options.add_argument('--allow-running-insecure-content')
options.add_argument('--disable-web-security')
options.add_argument('--lang=' + random.choice(language_list))
options.add_argument('--user-agent=' + fake_user_agent.user_agent())
options.add_argument('--no-sandbox')
options.add_argument("--window-size=1920x1080")
options.add_argument("--single-process")
options.add_argument("--disable-dev-shm-usage")
options.add_argument("--disable-dev-tools")
options.add_argument("--no-zygote")
options.add_argument(f"--user-data-dir={'/tmp'}")
options.add_argument(f"--data-path={'/tmp'}")
options.add_argument(f"--disk-cache-dir={'/tmp'}")
options.add_argument("--remote-debugging-port=9222")
options.add_argument("start-maximized")
options.add_argument("enable-automation")
options.add_argument("--headless")
options.add_argument("--disable-browser-side-navigation")
options.add_argument("--disable-gpu")
driver = webdriver.Chrome("/opt/chromedriver", options=options)```
Just in case anybody stumbles across this queston in future, adding the following to chrome options solved my issue:
prefs = {
"profile.default_content_settings.popups": 0,
"download.default_directory": r"/tmp",
"directory_upgrade": True
}
options.add_experimental_option("prefs", prefs)
I am using chilkat active x to access a webservice secured with x509.
SetSslClientCertPfx("pfxfilewithpath","password")
It works fine with the pfx file in the location I used it first.
If I copy it to another path it does not work anymore (error 109) , even after pc reboot or renaming.
Any chance to get this to work ?
Thanks in advance
tom
Using locert.LoadByCommonName("certname") and SetSslClientCert(locert) works but I would prefer to use SetSslClientCertPfx()
Examine the contents of the httpObject.LastErrorText property after calling httpObject.SetSslClientCertPfx (assuming this is for HTTP).
Whenever I add a third config file to my .immuconf.edn I get:
No configuration files were specified, and neither an .immuconf.edn file nor
an IMMUCONF_CFG environment variable was found
This is driving me crazy since I cant really find anything wrong.
Using this loads thing OK:
["configs/betfair.edn" "configs/web-server.edn"]
however this generated an error:
["configs/betfair.edn" "configs/web-server.edn" "~/betfair.edn"]
This is the content of betfair.edn
{:betfair {:usr "..."
:pwd "..."
:app-key "..." ;; key used
:app-key-live "..."
:app-key-test "..."}}
(where ... is replaced with actual strings)
Why am I getting this error when adding the third file and how can I fix this?
Make sure that the last file specified in your <project dir>/.immuconf.edn (~/betfair.edn) exists in your home directory.
Immuconf does some magic to replace ~ in filenames specified in .immuconf.edn with a value of (System/getProperty "user.home") so you might check if that system property points to the same directory where your ~/betfair.edn file is located.
I have recreated your setup and it works on my machine so it is probably a problem with locations or access rights to your files. Unfortunately, error handling for the no arg invocation of (immuconf.config/load) doesn't help in troubleshooting as it swallows any exceptions and returns nil. That exception would probably tell you what kind of error occured (some file not found or some IO error happened). You might want to file a pull request with a patch to log such errors as warnings instead of ignoring them.
I'm trying to send some files (a zip and a Word doc) to a directory on a server using ftplib. I have the broad strokes sorted out:
session = ftplib.FTP(ftp.server, 'user','pass')
filewpt = open(file, mode)
readfile = open(file, mode)
session.cwd(new/work/directory)
session.storbinary('STOR filename.zip', filewpt)
session.storbinary('STOR readme.doc', readfile)
print "filename.zip and readme.doc were sent to the folder on ftp"
readfile.close()
filewpt.close()
session.quit()
This may provide someone else what they are after but not me. I have been using FileZilla as a check to make sure the files were transferred. When I see they have made it to the server, I see that they are both way smaller or even zero K for the readme.doc file. Now I'm guessing this has something to do with the fact that I stored the file in 'binary transfer mode' <--- whatever that means.
This is where my problems lie. I have no idea at all (yet) what is meant by binary transfer mode. Is it simply that I have to use retrbinary to return the files to their original state?
Could someone please explain to me like I'm a two year old what has happened to my files? If there's any more info required, please let me know.
This is a fantastic resource. Solved most of my problems. Still trying to work out the intricacies of FTPs, but I guess I will save that for another day. The link below builds a function to effortlessly upload files to an FTP without the partial upload problem that I've seen experienced by more than one Stack Exchanger.
http://effbot.org/librarybook/ftplib.htm
Good Day,
I have searched the Internet tirelessly trying to find an example of how to start Windows Speech Training from with in my VB.Net Speech Recognition Application.
I have found a couple examples, which I can not get working to save my life.
One such example is on the Visual Studios Fourms:
HERE
this particular example users the "Process.Start" call to try and start the Speech Training Session. However this does not work for me. Here is the exmaple from that thread:
Process.Start("rundll32.exe", "C:\Windows\system32\speech\speechux\SpeechUX.dll, RunWizard UserTraining")
What happens is I get and error that says:
There was a problem starting
C:\Windows\system32\speech\speechux\SpeechUX.dll
The specified module could not be found
So I tried creating a shortcut (.lnk) file and thought I could access the DLL this way. My short cut kind of does the same thing. In the short cut I call the "rundll32.exe" with parameters:
C:\Windows\System32\rundll32.exe "C:\Windows\system32\speech\speechux\SpeechUX.dll" RunWizard UserTraining
Then in my VB.Net application I use the "Process.Start" and try to run the shortcut.
This also gives me the same error. However the shortcut itself will start the SPeech Training session. Weird?!?
So, I then took it one step further, to see if it has something to do with my VB.Net Application and the "Process.Start" Call.
I created a VBScript, and using "Wscript.Shell" I point to the Shortcut.
Running the VBScript calls the Shortcut and low and behold the Speech Training starts!
Great! But...
when I try to run the VBscript from my VB.net Application, I get that error again.
What the heck is going on here?
Your problem likely is that your program is compiled as 32-bit and your OS is 64-bit, and thus, when you try to access "C:\Windows\System32\Speech\SpeechUX\SpeechUX.dll" from your program, you're really accessing "C:\Windows\SysWOW64\Speech\SpeechUX\SpeechUX.dll" which, as rundll32.exe is reporting doesn't exist.
Compile your program as 64-bit instead or try the pseudo directory %SystemRoot%\sysnative.
Also, instead of rundll32.exe, you may want to just run SpeechUXWiz.exe with an argument.
Eg.
private Process StartSpeechMicrophoneTraining()
{
Process process = new Process();
process.StartInfo.FileName = System.IO.Path.Combine(Environment.SystemDirectory, "speech\\speechux\\SpeechUXWiz.exe");
process.StartInfo.Arguments = "MicTraining";
process.Start();
return process;
}
private Process StartSpeechUserTraining()
{
Process process = new Process();
process.StartInfo.FileName = System.IO.Path.Combine(Environment.SystemDirectory, "speech\\speechux\\SpeechUXWiz.exe");
process.StartInfo.Arguments = "UserTraining";
process.Start();
return process;
}
Hope that helps.
Read more about Windows 32-bit on Windows 64-bit at http://en.wikipedia.org/wiki/WoW64
or your problem specifically at http://en.wikipedia.org/wiki/WoW64#Registry_and_file_system
If you are using a 64bit OS and want to access system32 folder you must use the directory alias name, which is "sysnative".
"C:\windows\sysnative" will allow you access to system32 folder and all it's contents.
Honestly, who decided this at Microsoft is just silly!!