I'am use next code for authorization on server by service, and get other service'methods using cookie identifer for authorizathion.
TerminalControllerBinding soapObj;
soap_init1(soapObj.soap, SOAP_C_UTFSTRING);
soapObj.endpoint = "http://192.168.*.*/path/to/service";
ns1__getTemplatesResponse *response = new ns1__getTemplatesResponse;
std::string auth_res = "";
soapObj.ns1__auth("user", "password", auth_res);
QString sessid = QString::fromStdString(auth_res);
qDebug() << sessid;
soapObj.soap->cookies = soap_cookie(soapObj.soap, "sessid", sessid.toAscii().data(), ".");
Server not getting cookie "sessid"
I am kind of confused by the code you posted: You allocate memory for ns1__getTemplatesResponse, then do some apparently unrelated stuff; in fact you do not reference it again at all. Furthermore soap_cookie is a struct and soap->cookies is basically a list. So there is no magic that transfers the cookies to the server here.
I think what you want is soap_set_cookie. You can find a little more information on client side cookies here, but there isn't any example code. Much more helpful however is actually the server side documentation (the handling of cookies doesn't differ much).
Also notice that you either need to compile with -DWITH_COOKIES or define the macro yourself in stdsoap.h if you haven't done so already.
Related
I've to use a C++ library for sending data to a REST-Webservice of our company.
I start with Boost and Beast and with the example given here under Code::Blocks in a Ubuntu 16.04 enviroment.
The documentation doesn't helped me in following problem:
My code is, more or less, equal to the example and I can compile and send a GET-request to my test webservice successfully.
But how can I set data inside the request (req) from this definition:
:
beast::http::request<beast::http::string_body> req;
req.method("GET");
req.target("/");
:
I tried to use some req.body.???, but code completition doesn't give me a hint about functionality (btw. don't work). I know that req.method must be changed to "POST" to send data.
Google doesn't show new example about this, only the above code is found as a example.
Someone with a hint to a code example or using about the Beast (roar). Or should I use websockets? Or only boost::asio like answered here?
Thanks in advance and excuse my bad english.
Small addition to Eliott Paris's answer:
Correct syntax for setting body is
req.body() = "name=foo";
You should add
req.prepare_payload();
after setting the body to set body size in HTTP headers.
To send data with your request you'll need to fill the body and specify the content type.
beast::http::request<beast::http::string_body> req;
req.method(beast::http::verb::post);
req.target("/");
If you want to send "key=value" as a "x-www-form-urlencoded" pair:
req.set(beast::http::field::content_type, "application/x-www-form-urlencoded");
req.body() = "name=foo";
Or raw data:
req.set(beast::http::field::content_type, "text/plain");
req.body() = "Some raw data";
If have multiple databases defined on a particular ArangoDB server, how do I specify the database I'd like an AQL query to run against?
Running the query through the REST endpoint that includes the db name (substituted into [DBNAME] below) ie:
/_db/[DBNAME]/_api/cursor
doesn't seem to work. The error message says 'unknown path /_db/[DBNAME]/_api/cursor'
Is this something I have to specify in the query itself?
Also: The query I'm trying to run is:
FOR col in COLLECTIONS() RETURN col.name
Fwiw, I haven't found a way to set the "current" database through the REST API. Also, I'm accessing the REST API from C++ using fuerte.
Tom Regner deserves primary credit here for prompting the enquiry that produced this answer. I am posting my findings here as an answer to help others who might run into this.
I don't know if this is a fuerte bug, shortcoming or just an api caveat that wasn't clear to me... BUT...
In order for the '/_db/[DBNAME/' prefix in an endpoint (eg full endpoint '/_db/[DBNAME/_api/cursor') to be registered and used in the header of a ::arangodb::fuerte::Request, it is NOT sufficient (as of arangodb 3.5.3 and the fuerte version available at the time of this answer) to simply call:
std::unique_ptr<fuerte::Request> request;
const char *endpoint = "/_db/[DBNAME/_api/cursor";
request = fuerte::createRequest(fuerte::RestVerb::Post,endpoint);
// and adding any arguments to the request using a VPackBuilder...
// in this case the query (omitted)
To have the database name included as part of such a request, you must additionally call the following:
request->header.parseArangoPath(endpoint);
Failure to do so seems to result in an error about an 'unknown path'.
Note 1: Simply setting the database member variable, ie
request->header.database = "[DBNAME]";
does not work.
Note 2: that operations without the leading '/_db/[DBNAME]/' prefix, seem to work fine using the 'current' database. (which at least for me, seems to be stuck at '_system' since as far as I can tell, there doesn't seem to be an endpoint to change this via the HTTP REST Api.)
The docs aren't very helpful right now, so just incase someone is looking for a more complete example, then please consider the following code.
EventLoopService eventLoopService;
// adjust the connection for your environment!
std::shared_ptr<Connection> conn = ConnectionBuilder().endpoint("http://localhost:8529")
.authenticationType(AuthenticationType::Basic)
.user(?) // enter a user with access
.password(?) // enter the password
.connect(eventLoopService);
// create the request
std::unique_ptr<Request> request = createRequest(RestVerb::Post, ContentType::VPack);
// enter the database name (ensure the user has access)
request->header.database = ?;
// API endpoint to submit AQL queries
request->header.path = "/_api/cursor";
// Create a payload to be submitted to the API endpoint
VPackBuilder builder;
builder.openObject();
// here is your query
builder.add("query", VPackValue("for col in collections() return col.name"));
builder.close();
// add the payload to the request
request->addVPack(builder.slice());
// send the request (blocking)
std::unique_ptr<Response> response = conn->sendRequest(std::move(request));
// check the response code - it should be 201
unsigned int statusCode = response->statusCode();
// slice has the response data
VPackSlice slice = response->slices().front();
std::cout << slice.get("result").toJson() << std::endl;
We are trying to create a cookie in the PeopleSoft Peoplecode by using the %Response object.
However, the code we tried is failing.
&YourCookie = %Response.AddCookie("YourCookieName", "LR");
Another snippet we tried to create the cookie
Local object &Response = %Response;
Local object &YourCookie;
&YourCookie = &Response.CreateCookie("YourCookieName");
&YourCookie.Domain = %Request.AuthTokenDomain;
&YourCookie.MaxAge = -1; /* Makes this a session cookie (default) */
&YourCookie.Path = "/";
&YourCookie.Secure = True; /* Set to true if using https (will still work with http) */
&YourCookie.Value = "Set the cookie value here. Encrypt sensitive information.";
The document reference points to IScript functions called CreateCookie methods etc.
http://docs.oracle.com/cd/E15645_01/pt850pbr0/eng/psbooks/tpcr/chapter.htm?File=tpcr/htm/tpcr21.htm
However, these don't work in Peoplecode. We don't have the knowledge to create IScript or use it. Any insight with the People code API for cookies or IScript is much appreciated.
I just tested on PeopleTools 8.54.11 and was able to create a cookie using the snippet you provided above.
I did find I had an issue if I set
&YourCookie.Secure = True;
in an environment where I was using HTTP.
If you set Secure to False the cookie will be available in both HTTP and HTTPS
if you set Secure to True the cookie is only available in HTTPS
PeopleTools 8.54 Documentation showing the CreateCookie method
I have been trying to do this (same code snippet) from within signon peoplecode, tools release is 8.54.09. I can execute the first two lines of code, but as soon as the line of code executing the CreateCookie() method executes, I get tossed out / end up on the signon error page.
This seems to support the previous answer saying that the API has removed the method, but the answer before that says it has been successful on tools 8.54.11 -- does that mean they removed it, then put it back, and I happen to be stuck with a release where it was removed? :-/
I am working on a blackberry application. I need to call soap webservices, but I am unable to do so, and am getting null as a response. Following is my code:
private static final String CONNECTION_PARAMS = ";deviceside=true";
SoapObject request = new SoapObject("http://service.action.com/",
"findActiveSecurities");
SoapSerializationEnvelope envelope = new SoapSerializationEnvelope(SoapEnvelope.VER11);
envelope.bodyOut = request;
HttpTransportBasicAuth ht =
new HttpTransportBasicAuth("http://myurl.com/ebclient/services/MobileClientService?wsdl"+CONNECTION_PARAMS,
"myusername",
"mypassword");
PropertyInfo propInfo=new PropertyInfo();
propInfo.type=PropertyInfo.INTEGER_CLASS;
//adding parameters
request.addProperty("arg0","NSE");
request.addProperty("arg1","0");
request.addProperty("arg2","100");
envelope.setOutputSoapObject(request);
try {
ht.call(SOAP_ACTION, envelope);
result = (SoapObject)envelope.getResponse();
System.out.println(result);
} catch (IOException e) {
e.printStackTrace();
} catch (XmlPullParserException e) {
e.printStackTrace();
}
I am getting null as a result.Please have a look at the code and help me to correct it.
Thanks in advance
Actually the problem was instead of passing 0 and 100 as String ...
request.addProperty("arg0","NSE");
request.addProperty("arg1","0");
request.addProperty("arg2","100");
I use
request.addProperty("arg0","NSE");
request.addProperty("arg1",new Integer(0));
request.addProperty("arg2",new Integer(1000));
also this link helped me.
also before asking this question I was facing some problem that the Simulator was not recognizing a Library. It shows error message something like "there is no library Ksoap2_j2me.jar" - resolved from this link.
Sorry for poor English but I think this can save time of some other developer.
It's hard to tell from what you're posted, but my guess is that you're having some kind of network problem. I'm guessing that you initialize result = null;, and then your call to ht.call() throws an IOException, leaving result null.
You're using ksoap2, which is a library written for generic J2ME clients. However, BlackBerry networking doesn't work exactly like all other J2ME platforms.
You are controlling the BlackBerry network transport with your connection params string, which is hardcoded:
private static final String CONNECTION_PARAMS = ";deviceside=true";
Unfortunately, this string suffix may not be right for all network conditions (or any, if you don't have device APN settings correct).
I think you have a couple choices:
1. Connection Suffix Strings
You can try dynamically choosing the right suffix string, depending on conditions when your app runs. This can allow the device, for example, to connect via Wi-Fi if it's available, or via BES if that's available. Developers new to BlackBerry may be surprised that app code needs to worry about this (read here for more, or watch this).
If you want to simply replace CONNECTION_PARAMS with a dynamic string, you might check out the implementation here.
2. ConnectionFactory
In OS 5.0, BlackBerry added the ConnectionFactory class, which was a big improvement over the old way of having to assemble connection strings. If you only need to support OS 5.0 and greater, you might choose to rewrite the code to use ConnectionFactory.
Since you have access to the ksoap source code, you could change it. It looks like the connection code is in ServiceConnectionMidp.java:
public ServiceConnectionMidp(String url) throws IOException {
connection = (HttpConnection) Connector.open(url, Connector.READ_WRITE, true);
}
Instead of attaching connection parameters to the url passed to this class, you could change the class to get the connection from a ConnectionFactory, customized to support the network transports you want.
Doing this means that if you ever want to update your code to use a new version of ksoap2, you'll need to make these modifications again. However, given the future of BlackBerry Java, that seems like a reasonable compromise to make.
I am looking for a way to handle sessions through cookies in C++. Can anybody please help me with some hints for the solution?
libcurl can help you with this. See "Cookies Without Chocolate Chips" here.
Assuming your C++ code is functioning as a CGI handler, it's merely a matter of reading and writing cookies in the requests and responses.
If your session data is small (less than 32 bytes or so), then you can store it all right in the cookie.
If you need to store more data, or want to share sessions between servers, then you will want to create unique and random IDs to represent your sessions. You should then take that ID and lookup the actual session data (in memory or in a database).
Everything I have written is 1990's CGI 101.
I guess in C++ land, it would look like this:
int main() {
map<string,string> headers = parseRequestHeaders(cin);
int64_t sessionId = 0;
SessionData *session = 0;
if (getSessionId(headers, &sessionId)) {
session = getSession(sessionId);
}
else {
session = newSession();
sessionId = session->id();
setCookie(sessionId);
}
// ...
}