Related
Obviously, you can use the | (pipe?) to represent OR, but is there a way to represent AND as well?
Specifically, I'd like to match paragraphs of text that contain ALL of a certain phrase, but in no particular order.
Use a non-consuming regular expression.
The typical (i.e. Perl/Java) notation is:
(?=expr)
This means "match expr but after that continue matching at the original match-point."
You can do as many of these as you want, and this will be an "and." Example:
(?=match this expression)(?=match this too)(?=oh, and this)
You can even add capture groups inside the non-consuming expressions if you need to save some of the data therein.
You need to use lookahead as some of the other responders have said, but the lookahead has to account for other characters between its target word and the current match position. For example:
(?=.*word1)(?=.*word2)(?=.*word3)
The .* in the first lookahead lets it match however many characters it needs to before it gets to "word1". Then the match position is reset and the second lookahead seeks out "word2". Reset again, and the final part matches "word3"; since it's the last word you're checking for, it isn't necessary that it be in a lookahead, but it doesn't hurt.
In order to match a whole paragraph, you need to anchor the regex at both ends and add a final .* to consume the remaining characters. Using Perl-style notation, that would be:
/^(?=.*word1)(?=.*word2)(?=.*word3).*$/m
The 'm' modifier is for multline mode; it lets the ^ and $ match at paragraph boundaries ("line boundaries" in regex-speak). It's essential in this case that you not use the 's' modifier, which lets the dot metacharacter match newlines as well as all other characters.
Finally, you want to make sure you're matching whole words and not just fragments of longer words, so you need to add word boundaries:
/^(?=.*\bword1\b)(?=.*\bword2\b)(?=.*\bword3\b).*$/m
Look at this example:
We have 2 regexps A and B and we want to match both of them, so in pseudo-code it looks like this:
pattern = "/A AND B/"
It can be written without using the AND operator like this:
pattern = "/NOT (NOT A OR NOT B)/"
in PCRE:
"/(^(^A|^B))/"
regexp_match(pattern,data)
The AND operator is implicit in the RegExp syntax.
The OR operator has instead to be specified with a pipe.
The following RegExp:
var re = /ab/;
means the letter a AND the letter b.
It also works with groups:
var re = /(co)(de)/;
it means the group co AND the group de.
Replacing the (implicit) AND with an OR would require the following lines:
var re = /a|b/;
var re = /(co)|(de)/;
You can do that with a regular expression but probably you'll want to some else. For example use several regexp and combine them in a if clause.
You can enumerate all possible permutations with a standard regexp, like this (matches a, b and c in any order):
(abc)|(bca)|(acb)|(bac)|(cab)|(cba)
However, this makes a very long and probably inefficient regexp, if you have more than couple terms.
If you are using some extended regexp version, like Perl's or Java's, they have better ways to do this. Other answers have suggested using positive lookahead operation.
Is it not possible in your case to do the AND on several matching results? in pseudocode
regexp_match(pattern1, data) && regexp_match(pattern2, data) && ...
Why not use awk?
with awk regex AND, OR matters is so simple
awk '/WORD1/ && /WORD2/ && /WORD3/' myfile
The order is always implied in the structure of the regular expression. To accomplish what you want, you'll have to match the input string multiple times against different expressions.
What you want to do is not possible with a single regexp.
If you use Perl regular expressions, you can use positive lookahead:
For example
(?=[1-9][0-9]{2})[0-9]*[05]\b
would be numbers greater than 100 and divisible by 5
In addition to the accepted answer
I will provide you with some practical examples that will get things more clear to some of You. For example lets say we have those three lines of text:
[12/Oct/2015:00:37:29 +0200] // only this + will get selected
[12/Oct/2015:00:37:x9 +0200]
[12/Oct/2015:00:37:29 +020x]
See demo here DEMO
What we want to do here is to select the + sign but only if it's after two numbers with a space and if it's before four numbers. Those are the only constraints. We would use this regular expression to achieve it:
'~(?<=\d{2} )\+(?=\d{4})~g'
Note if you separate the expression it will give you different results.
Or perhaps you want to select some text between tags... but not the tags! Then you could use:
'~(?<=<p>).*?(?=<\/p>)~g'
for this text:
<p>Hello !</p> <p>I wont select tags! Only text with in</p>
See demo here DEMO
You could pipe your output to another regex. Using grep, you could do this:
grep A | grep B
((yes).*(no))|((no).*(yes))
Will match sentence having both yes and no at the same time, regardless the order in which they appear:
Do i like cookies? **Yes**, i do. But milk - **no**, definitely no.
**No**, you may not have my phone. **Yes**, you may go f yourself.
Will both match, ignoring case.
Use AND outside the regular expression. In PHP lookahead operator did not not seem to work for me, instead I used this
if( preg_match("/^.{3,}$/",$pass1) && !preg_match("/\s{1}/",$pass1))
return true;
else
return false;
The above regex will match if the password length is 3 characters or more and there are no spaces in the password.
Here is a possible "form" for "and" operator:
Take the following regex for an example:
If we want to match words without the "e" character, we could do this:
/\b[^\We]+\b/g
\W means NOT a "word" character.
^\W means a "word" character.
[^\We] means a "word" character, but not an "e".
see it in action: word without e
"and" Operator for Regular Expressions
I think this pattern can be used as an "and" operator for regular expressions.
In general, if:
A = not a
B = not b
then:
[^AB] = not(A or B)
= not(A) and not(B)
= a and b
Difference Set
So, if we want to implement the concept of difference set in regular expressions, we could do this:
a - b = a and not(b)
= a and B
= [^Ab]
I use the Postgres regexp_matches function to extract numbers.
The regular expression I use is
4([\s\-\/\.]*?0){3}([\s\-\/\.]*?[12]){1}([\s\-\/\.]*?\d){4}
If I use a tool like https://regexr.com/ to verify if it's working and I apply the following test set
4-0001-1234
5-2342-2344
499999999
4-0001-1234 4.0001.12344 4-0-0-0-1-1234
I get the expected extraction result:
4-0001-1234
4-0001-1234
4.0001.1234
4-0-0-0-1-1234
However, if I use the same expression in Postgresql, it does work well:
SELECT unnest(regexp_matches('4-0001-1234', '4([\s\-\/\.]*?0){3}([\s\-\/\.]*?[12]){1}([\s\-\/\.]*?\d){4}', 'g'));
Result:
0
1
4
What I suspect is, that it has to do with the greediness and/or that the quantifiers like {3} are not applied in the right way. Or it uses the Posix standard for regular expressions, which always seem to differ a little bit from the Java Syntax.
Any suggestions why it is not working and how to fix it?
The regexp_matches(string text, pattern text [, flags text]) function returns the captured values:
Return all captured substrings resulting from matching a POSIX regular expression against the string.
You may fix the expression using non-capturing groups:
SELECT unnest(regexp_matches('4-0001-1234 4.0001.12344 4-0-0-0-1-1234', '4(?:[\s/.-]*0){3}(?:[\s/.-]*[12])(?:[\s/.-]*\d){4}', 'g'));
See the online demo.
BTW, you do not need to escape - when it is at the start/end of the bracket expression, and there is no need to escape neither / nor . there. I also suggest removing {1} as a = a{1} in any regex supporting limiting quantifiers.
Obviously, you can use the | (pipe?) to represent OR, but is there a way to represent AND as well?
Specifically, I'd like to match paragraphs of text that contain ALL of a certain phrase, but in no particular order.
Use a non-consuming regular expression.
The typical (i.e. Perl/Java) notation is:
(?=expr)
This means "match expr but after that continue matching at the original match-point."
You can do as many of these as you want, and this will be an "and." Example:
(?=match this expression)(?=match this too)(?=oh, and this)
You can even add capture groups inside the non-consuming expressions if you need to save some of the data therein.
You need to use lookahead as some of the other responders have said, but the lookahead has to account for other characters between its target word and the current match position. For example:
(?=.*word1)(?=.*word2)(?=.*word3)
The .* in the first lookahead lets it match however many characters it needs to before it gets to "word1". Then the match position is reset and the second lookahead seeks out "word2". Reset again, and the final part matches "word3"; since it's the last word you're checking for, it isn't necessary that it be in a lookahead, but it doesn't hurt.
In order to match a whole paragraph, you need to anchor the regex at both ends and add a final .* to consume the remaining characters. Using Perl-style notation, that would be:
/^(?=.*word1)(?=.*word2)(?=.*word3).*$/m
The 'm' modifier is for multline mode; it lets the ^ and $ match at paragraph boundaries ("line boundaries" in regex-speak). It's essential in this case that you not use the 's' modifier, which lets the dot metacharacter match newlines as well as all other characters.
Finally, you want to make sure you're matching whole words and not just fragments of longer words, so you need to add word boundaries:
/^(?=.*\bword1\b)(?=.*\bword2\b)(?=.*\bword3\b).*$/m
Look at this example:
We have 2 regexps A and B and we want to match both of them, so in pseudo-code it looks like this:
pattern = "/A AND B/"
It can be written without using the AND operator like this:
pattern = "/NOT (NOT A OR NOT B)/"
in PCRE:
"/(^(^A|^B))/"
regexp_match(pattern,data)
The AND operator is implicit in the RegExp syntax.
The OR operator has instead to be specified with a pipe.
The following RegExp:
var re = /ab/;
means the letter a AND the letter b.
It also works with groups:
var re = /(co)(de)/;
it means the group co AND the group de.
Replacing the (implicit) AND with an OR would require the following lines:
var re = /a|b/;
var re = /(co)|(de)/;
You can do that with a regular expression but probably you'll want to some else. For example use several regexp and combine them in a if clause.
You can enumerate all possible permutations with a standard regexp, like this (matches a, b and c in any order):
(abc)|(bca)|(acb)|(bac)|(cab)|(cba)
However, this makes a very long and probably inefficient regexp, if you have more than couple terms.
If you are using some extended regexp version, like Perl's or Java's, they have better ways to do this. Other answers have suggested using positive lookahead operation.
Is it not possible in your case to do the AND on several matching results? in pseudocode
regexp_match(pattern1, data) && regexp_match(pattern2, data) && ...
Why not use awk?
with awk regex AND, OR matters is so simple
awk '/WORD1/ && /WORD2/ && /WORD3/' myfile
The order is always implied in the structure of the regular expression. To accomplish what you want, you'll have to match the input string multiple times against different expressions.
What you want to do is not possible with a single regexp.
If you use Perl regular expressions, you can use positive lookahead:
For example
(?=[1-9][0-9]{2})[0-9]*[05]\b
would be numbers greater than 100 and divisible by 5
In addition to the accepted answer
I will provide you with some practical examples that will get things more clear to some of You. For example lets say we have those three lines of text:
[12/Oct/2015:00:37:29 +0200] // only this + will get selected
[12/Oct/2015:00:37:x9 +0200]
[12/Oct/2015:00:37:29 +020x]
See demo here DEMO
What we want to do here is to select the + sign but only if it's after two numbers with a space and if it's before four numbers. Those are the only constraints. We would use this regular expression to achieve it:
'~(?<=\d{2} )\+(?=\d{4})~g'
Note if you separate the expression it will give you different results.
Or perhaps you want to select some text between tags... but not the tags! Then you could use:
'~(?<=<p>).*?(?=<\/p>)~g'
for this text:
<p>Hello !</p> <p>I wont select tags! Only text with in</p>
See demo here DEMO
You could pipe your output to another regex. Using grep, you could do this:
grep A | grep B
((yes).*(no))|((no).*(yes))
Will match sentence having both yes and no at the same time, regardless the order in which they appear:
Do i like cookies? **Yes**, i do. But milk - **no**, definitely no.
**No**, you may not have my phone. **Yes**, you may go f yourself.
Will both match, ignoring case.
Use AND outside the regular expression. In PHP lookahead operator did not not seem to work for me, instead I used this
if( preg_match("/^.{3,}$/",$pass1) && !preg_match("/\s{1}/",$pass1))
return true;
else
return false;
The above regex will match if the password length is 3 characters or more and there are no spaces in the password.
Here is a possible "form" for "and" operator:
Take the following regex for an example:
If we want to match words without the "e" character, we could do this:
/\b[^\We]+\b/g
\W means NOT a "word" character.
^\W means a "word" character.
[^\We] means a "word" character, but not an "e".
see it in action: word without e
"and" Operator for Regular Expressions
I think this pattern can be used as an "and" operator for regular expressions.
In general, if:
A = not a
B = not b
then:
[^AB] = not(A or B)
= not(A) and not(B)
= a and b
Difference Set
So, if we want to implement the concept of difference set in regular expressions, we could do this:
a - b = a and not(b)
= a and B
= [^Ab]
I'm trying to match cases with regular expression to search and replace some text of given pattern. I can match the pattern, but I'd like to keep some of the literals when replacing.
For example, from the string "abcd123," I'd like to keep abcd but remove 123. I can match the pattern using a simple regular expression like [a-zA-Z0-9]+, but when I want to replace it, I don't know what to use for the replacement. Is this even possible with just regular expressions?
Thanks a lot.
The answer depends on what language/regex engine you are using. You typically use parentheses to save sections matched and either $1, $2, ... or \1, \2, ... in the replacement string to refer to those sections.
For example, from JavaScript:
var x = "Hello World";
x.replace( /([A-Z])\w+/g, '$1xx' );
// "Hxx Wxx"
What language or text editor are you using?
Obviously, you can use the | (pipe?) to represent OR, but is there a way to represent AND as well?
Specifically, I'd like to match paragraphs of text that contain ALL of a certain phrase, but in no particular order.
Use a non-consuming regular expression.
The typical (i.e. Perl/Java) notation is:
(?=expr)
This means "match expr but after that continue matching at the original match-point."
You can do as many of these as you want, and this will be an "and." Example:
(?=match this expression)(?=match this too)(?=oh, and this)
You can even add capture groups inside the non-consuming expressions if you need to save some of the data therein.
You need to use lookahead as some of the other responders have said, but the lookahead has to account for other characters between its target word and the current match position. For example:
(?=.*word1)(?=.*word2)(?=.*word3)
The .* in the first lookahead lets it match however many characters it needs to before it gets to "word1". Then the match position is reset and the second lookahead seeks out "word2". Reset again, and the final part matches "word3"; since it's the last word you're checking for, it isn't necessary that it be in a lookahead, but it doesn't hurt.
In order to match a whole paragraph, you need to anchor the regex at both ends and add a final .* to consume the remaining characters. Using Perl-style notation, that would be:
/^(?=.*word1)(?=.*word2)(?=.*word3).*$/m
The 'm' modifier is for multline mode; it lets the ^ and $ match at paragraph boundaries ("line boundaries" in regex-speak). It's essential in this case that you not use the 's' modifier, which lets the dot metacharacter match newlines as well as all other characters.
Finally, you want to make sure you're matching whole words and not just fragments of longer words, so you need to add word boundaries:
/^(?=.*\bword1\b)(?=.*\bword2\b)(?=.*\bword3\b).*$/m
Look at this example:
We have 2 regexps A and B and we want to match both of them, so in pseudo-code it looks like this:
pattern = "/A AND B/"
It can be written without using the AND operator like this:
pattern = "/NOT (NOT A OR NOT B)/"
in PCRE:
"/(^(^A|^B))/"
regexp_match(pattern,data)
The AND operator is implicit in the RegExp syntax.
The OR operator has instead to be specified with a pipe.
The following RegExp:
var re = /ab/;
means the letter a AND the letter b.
It also works with groups:
var re = /(co)(de)/;
it means the group co AND the group de.
Replacing the (implicit) AND with an OR would require the following lines:
var re = /a|b/;
var re = /(co)|(de)/;
You can do that with a regular expression but probably you'll want to some else. For example use several regexp and combine them in a if clause.
You can enumerate all possible permutations with a standard regexp, like this (matches a, b and c in any order):
(abc)|(bca)|(acb)|(bac)|(cab)|(cba)
However, this makes a very long and probably inefficient regexp, if you have more than couple terms.
If you are using some extended regexp version, like Perl's or Java's, they have better ways to do this. Other answers have suggested using positive lookahead operation.
Is it not possible in your case to do the AND on several matching results? in pseudocode
regexp_match(pattern1, data) && regexp_match(pattern2, data) && ...
Why not use awk?
with awk regex AND, OR matters is so simple
awk '/WORD1/ && /WORD2/ && /WORD3/' myfile
The order is always implied in the structure of the regular expression. To accomplish what you want, you'll have to match the input string multiple times against different expressions.
What you want to do is not possible with a single regexp.
If you use Perl regular expressions, you can use positive lookahead:
For example
(?=[1-9][0-9]{2})[0-9]*[05]\b
would be numbers greater than 100 and divisible by 5
In addition to the accepted answer
I will provide you with some practical examples that will get things more clear to some of You. For example lets say we have those three lines of text:
[12/Oct/2015:00:37:29 +0200] // only this + will get selected
[12/Oct/2015:00:37:x9 +0200]
[12/Oct/2015:00:37:29 +020x]
See demo here DEMO
What we want to do here is to select the + sign but only if it's after two numbers with a space and if it's before four numbers. Those are the only constraints. We would use this regular expression to achieve it:
'~(?<=\d{2} )\+(?=\d{4})~g'
Note if you separate the expression it will give you different results.
Or perhaps you want to select some text between tags... but not the tags! Then you could use:
'~(?<=<p>).*?(?=<\/p>)~g'
for this text:
<p>Hello !</p> <p>I wont select tags! Only text with in</p>
See demo here DEMO
You could pipe your output to another regex. Using grep, you could do this:
grep A | grep B
((yes).*(no))|((no).*(yes))
Will match sentence having both yes and no at the same time, regardless the order in which they appear:
Do i like cookies? **Yes**, i do. But milk - **no**, definitely no.
**No**, you may not have my phone. **Yes**, you may go f yourself.
Will both match, ignoring case.
Use AND outside the regular expression. In PHP lookahead operator did not not seem to work for me, instead I used this
if( preg_match("/^.{3,}$/",$pass1) && !preg_match("/\s{1}/",$pass1))
return true;
else
return false;
The above regex will match if the password length is 3 characters or more and there are no spaces in the password.
Here is a possible "form" for "and" operator:
Take the following regex for an example:
If we want to match words without the "e" character, we could do this:
/\b[^\We]+\b/g
\W means NOT a "word" character.
^\W means a "word" character.
[^\We] means a "word" character, but not an "e".
see it in action: word without e
"and" Operator for Regular Expressions
I think this pattern can be used as an "and" operator for regular expressions.
In general, if:
A = not a
B = not b
then:
[^AB] = not(A or B)
= not(A) and not(B)
= a and b
Difference Set
So, if we want to implement the concept of difference set in regular expressions, we could do this:
a - b = a and not(b)
= a and B
= [^Ab]