I have just downloaded the boost libraries from the boost website and extracted them to my desktop. I was hoping to just have a quick look at them and have them installed on my machine and perhaps use them in the future when I am more accustomed to C++.
When I extracted it, I was confused with all of the extracted files. There is all of the headers in the boost directory but tutorials mention running bootstrap.bat (I'm using Windows).
So I am asking this: do I simply extract the headers to my compilers include directory like normal to get boost up and running or do I need to do something else?
As I understand it from searching about, apparently "most" of boost is just templates and can be used simply by including the headers, but what about the rest?
Am I totally barking up the wrong tree?
Thanks for any help
Since you mentioned you run Windows, take a look at this automated installer:
► http://www.boostpro.com/download/
Also, some general advice:
do I simply extract the headers to my compilers include directory
No! Do not pollute your compiler's includes with third-party includes; make a separate directory specifically for a particular library. You'll then need to tell your specific IDE in what directory it can find the library headers.
I usually use boostpro's installer, it is less work. I vaguely remember having to set up the BOOST_ROOT environment variable on one of my systems to use it.
The libraries that contained compiled source should be included in the installer.
If you don't use the installer (or don't set up your build correctly), and try to use the libraries that need it you will likely get some linker errors when you try and compile your program. Usually if you take those linker errors and plop them in google it tells you pretty quick which libraries you need to include in your build system. I use CMake for that and have been very happy..
Just add the root boost directory to include paths of your compiler/IDE (so if you have Boost extracted to C:\Boost, the compiler will use that path, not C:\Boost\boost).
Don't do any copying of the boost folder to your compiler's include directory, because it may make upgrading Boost harder in the future.
Also if you plan to use any of boost's compiled libraries, add Boost's lib directory to compiler's library search paths. Configuring the compiling step is a matter of putting the right toolset parameter to boost's build tool. If you have your command line environment configured properly, bootstrap should run and compile the builder without any problems, and the Boost builder should properly detect your toolset, so no parameters will be necessary.
As you do such configuration only once every time you do a clean install of your favorite compiler, it's not as hard or daunting as it seems.
Related
Right now I'm trying to create my first "real" project in C++ using Visual Studio 2019. I need to include a third-party library as a dependency. The instructions on the project homepage simply recommend to include all source/header files directly into the project. My understanding is that it's a bad practice, since the end result would look quite ugly in any VCS.
Thankfully, the library author also provided build scripts that call cl, lib and link with appropriate arguments and produce the coveted foo.lib. I added that file to dependencies in linker options and after some haranguing with compiler/linker options finally got it running.
To my distress, I realised that I've done all those manipulations in Release configuration, which prevented me from using the debugger. I then built the library with /MDd, fixed some compiler options... and got a bizarre compile-time error in vcruntime.h ( fatal error C1189: #error: _HAS_CXX17 and _HAS_CXX20 must both be defined, and _HAS_CXX20 must imply _HAS_CXX17).
At this point, I knew I was doing something terribly wrong, since including a simple library should't require so much manual knob-tweaking. What is the right, canonical way of including third-party dependencies in Visual Studio (and C++ in general)? Assuming the dependency isn't available on Nuget, vcpkg or somesuch.
As I understand from the stuff you did was on Windows. First of all I would recommend you try a linux distro. In windows it is possible to get lib files running, but not easy. It would help if you could send me a link to the library you are using.
The usual approach is to just stick those sources in their own directory and their own Visual Studio project (not solution). This can still build a foo.lib. You won't need many options for this.
Next, you just tell Visual Studio that your own project depends on that other project, and it will then link foo.LIB for you.
Having said that, it sounds like you try to build your two projects with different settings for the C++ version. VS2019 has good support for C++17 and experimental support for C++20, so you can choose. But you need to choose consistently for all your projects.
In larger solutions you can us a .vsprops file for that, which is like an #include for project files. A bit overkill when you have two projects, a lifesaver when you have 150.
It varies a bit how you include 3rd party libraries, sometimes 3rd party libraries have an installation and install themselves like under Common Components sometimes you have to do it manually.
E.g. YourSolution/3rdParty/foo/include
YourSolution/3rdParty/foo/lib
YourSolution/3rdParty/foo/lib/release
YourSolution/3rdParty/foo/lib/debug
Sometimes the libraries have different names then they may be in the same folder.
Once you have that structure go to your project's properties C/C++ and add the include under Additional Include Directories make sure you have configuration "All Configurations" here. Then go to Project properties/Linker/Input and the dependency for Debug Configuration and for the Release Configuration - since usually they are different libraries per configuration. e.g. release/foo.lib and debug/foo.lib (foo.lib foo-d.lib or whatever they are called).
Use the macros to make sure you get the right locations so that they are relative to your solution and project. It is not good having absolute paths. E.g. $(SolutionDir)3rdparty\foo\include
Disclaimer : I am not sure this is the "optimal" way to do it but that is the way I do it.
So I recently got fed up with Windows and installed Linux Mint. I am trying to get a project to build I have in Code::Blocks. I have installed Code::Blocks but I need glew(as well as a few other libraries). I found it in the software manager and installed it. I've managed to locate and include the header files. But I feel like the next step should be relatively straightforward and all over the internet but (perhaps due to lack of proper terminology) I have been as of yet unable to locate an answer.
Do I need to locate the files on my system and link to each library manually? This is what I did on windows but I just downloaded the binaries and knew where they were. I found one library from the software manager and linked to it manually but it just feels like I'm doing it the wrong way. Since it's "installed" on the system is there some quick way to link?
You should use two flags for linker '-l' and '-L'. You can set these flags somewhere in project properties.
The first one '-l' tells linker to link with particular library. For example glew, probably in /usr/lib is a file named libglew.so, when you link your program with '-lglew' flag, it will link it with glew library. Linker looks for libraries in few standard places: /usr/lib, /usr/local/lib and few extra. If you have your libs in nonstandard place, use '-L' flag to point these dirs.
Many linux distributions provide two kinds of packages with libraries, regular ones just with runtime, and devel ones (usually prefixed or suffixed with dev or devel) with header files and development version of libraries.
use build systems, Luke!
the typical way to develop/build software in *nix world is 3 steps:
configure stage -- before building smth you have to realize in what environment you are going to build your software... is everything that required is installed... it wouldn't be good if at compile stage (after few hours of compilation) you (or user who build your soft) got an error: unable to #include the 'xxx.h'. the most popular build systems are: cmake, my favorite after autotools. yout may try also scons or maybe crazy (b)jam...
compile stage -- usually just make all
install stage -- deploy just built software into the system. or other way: build packages for target distro (.deb/.rpm/&etc)
at configuration stage using test scripts (don't worry there are plenty of them for various use cases) you can find all required headers/libraries/programs/compiler options/whatever you need to compile your package... and yes: do not use hardcoded paths in your Makefiles (or whatever you use to make your binaries)
Answer to this question really depends on what you want to achieve. If you want just to build you app by yourself then you can just write path to libraries in your makefile, or your code editor settings. You may not even have to do that as if libraries installed by your linux distribution package manager, headers usually go to /usr/include and libraries to /usr/lib or /urs/lib64 etc. That locations are standard and you do not need to specify them explicitly. Anyway you need to specify libraries you want to link to.
If you want to create application that can be build by others, or by you on many different configurations/environments using something like cmake would be very helpful.
I'm totally spinning my wheels with getting a couple of 3rd party libraries to work with my c++ programs. I'm looking for some general advice (40,000 foot level) about the general steps that one needs to take when implementing libraries.
First, some specifics: I am using code::blocks in Windows as my IDE. I like this IDE and really don't want to switch to anything else if I don't have to (I've tried visual c++ and also some things in linux). The libraries that I am trying to use are GMP and crypto++.
OK. What I think I know is this: After downloading the library, I unzip the file to a folder. I've been unzipping directly to C:\ with each zip file extracted to its own folder (e.g. c:\cryptopp and c:\gmp). I think that the next step is to build the library, but this is where I get totally stuck. How is this done? There are no executable files among those extracted. From what I can tell, I believe that I do this in code::blocks, but I have no idea how?
Finally, assuming that I can get this done, which I believe creates the .lib files, the last step before actually using the library in my code, is to link into the library. This part, I believe that I understand.
So, my question is broad: do I understand this process overall? And if so, how do I go about building these libraries, if in fact that it the thing that I am missing.
Thanks very much for indulging my ignorance. I'm totally rudderless right now and despite hours and hours on google, I'm making no progress. Also, feel free to correct anything that I have stated as fact that is not correct. Thanks a lot!
Usually libraries have a special file called makefile in them, and are built with a utility called Make (or one of it's variations, whatever works uder windows).
Usually all you have to do is to run Make in the directory where you have unpacked the source files, and it will do the rest itself.
If those libraries you mention (GMP and crypto++; disclaimer: I'm not familiar with either of them) don't have project files for code::blocks then you may still be able to compile them under Windows with MinGW.
If you have installed MinGW you use the MinGW shell to navigate to the appropriate directories which would be /c/cryptopp/ and /c/gmp in your examples - The MinGW shell works like a Unix shell, and has different naming conventions.
Then you need to compile the libraries. Check whether there's a Makefile in those directories, if there isn't you can check whether there's a configure script, which will generate the Makefile. If you have the Makefile you can type make which will compile the libraries with MinGW's port of the GCC compiler.
When the compilation is complete you should have a library in the form of a .a file (say libcryptopp.a) that you can link to your project. In code::blocks you would set the linker path (the -L command line option in GCC) to C:\cryptopp\bin or wherever the library has been compiled, and then add libcryptopp.a to the list of libraries you want to link (this is associated with the -l option in GCC). The convention is to leave out the lib prefix and the .a extension, so you would just add cryptopp to your library list. In the end your linker options should look like -LC:\cryptopp\bin -lcryptopp along with the
Also, to be able to use the libraries you need to add the path to the headers directory to the include path of your project. This is associated to the -I command line option in GCC, so your compiler's command line options would have something like -IC:\cryptopp\include somewhere.
Of course, all of the above assumes that you use code::blocks with GCC. If you're using it with VisualC++ then the principles are the same, but the specific steps differ.
I'm not new in C++ although I'm new in Linux. I'm using CMake to precompile a cross-platform game engine with some third-party components, but I have a lot of doubts about using libraries. My question is how to work with third-party libraries and where to put them. Apt installs libs in their official place (/usr/local, /usr/lib/ ..) but I develop in Windows using local libs that are in a folder in my project dir.
Also, I need a good tutorial to know the rules of how libraries work. For example: when trying to compile my project, luabind is asking for liblua.s0.1, but AFAIK there is no way to generate this library with the source provided by Lua (at least doing make, make install).
I know, this question is fuzzy but I haven't enough experience to be more concise.
Update: After reading some answers, a more concise question is the following. If I install all third-party libraries, how can I distribute my program? How do I manage dependencies without using a large readme?
Where to put libraries
The best solution is to use your Linux distribution's packaging system (apt-get, yum, or similar) to install libraries from distro-provided packages wherever possible.
If the distro's packaged libraries aren't of a recent enough version, or if you need some nonstandard build options, or if you need a library that your distro doesn't provide, then you can build and install it yourself. You have two main options for where to put the library:
/usr/local (libraries under /usr/local/lib, headers under /usr/local/include). This installs the libraries systemwide and is probably the simplest solution, since you should then be able to build against them without taking any extra steps. Do NOT install libraries directly under /usr, since that will interfere with your distro's packaging system.
Under your project directory, as you did under Windows. This has the advantages of not requiring root access and not making systemwide changes, but you'll have to update your project's include paths and library paths, and you'll have to put any shared library files someplace where the dynamic linker can find them (using LD_LIBRARY_PATH or ld.so.conf - see the link for more details).
How libraries work
See David A. Wheeler's excellent Programming Library HOWTO. I'd recommend reading that then posting any specific questions as new topics.
How to distribute your program
Traditionally, Unix / Linux programs do not include copies of their dependencies. It's instead up to the end user or developer to install those dependencies themselves. This can require a "large README," as you said, but it has a few advantages:
Development libraries can be installed, managed, and updated via the distro's package manager, instead of each source copy having its own set of libraries to track.
There's only one copy of any given library on a system, so there's only one place that needs updating if, for example, a security flaw is found. (For example, consider the chaos that resulted when zlib, a very widely used compression library, was found to have a security flaw, so every application that included an affected version needed to be updated.)
If your program is popular enough (and is open source or at least freely available), then package maintainers for various Linux distributions may want to package it and include it in their distro. Package maintainers really don't like bundled libraries. See, for example, Fedora's page on the topic.
If you're distributing your program to end users, you may want to consider offering a package (.dpkg or .rpm) that they could simply download and install without having to use source. Ideally, from the end user's perspective, the package would be added to distros' repositories (if it's open source or at least freely available) so that users can download it using their package managers (apt-get or yum). This can all get complicated, because of the large number of Linux distros out there, but a Debian/Ubuntu compatible .dpkg and a Red Hat/CentOS/Fedora-compatible .rpm should cover a good percentage of end users. Building packages isn't too hard, and there are good howtos online.
for the first part of your question regarding Windows: there's no real standard place for libraries/headers on Windows, so the easy solution is: create your own. Simply provide a single lib/ and include/ on your system and have all your projects use it (by setting the path in a cmake file that you include everywhere). Put all third party libs in there, for example:
your projects:
d:/projects/projectA
d:/projects/projectB
third party stuff:
d:/api/lib/lua.lib
d:/api/include/lua/....
(you can even use symlinks aka 'directory junctions' if you have different version)
and the corresponding cmake file:
include_directories( d:/api/include )
link_directories( d:/api/lib )
Okay, so this is one of the basic questions and while I myself might not come across very clear on this, here goes:
While building a project, your compiler will need to find the header files of the libraries. The headers must be in the include path.
after compilation is done, the linker will look for the library binaries (files.so or something like that). These must be in the Library path.
That's the basics.
If you have some specific libaries, you can add them to your own project-specific lib/ and include/ directories and add them to the include path and the library path respectively.
Adding these dirs to these paths can be done in many ways, depending upon how you are building the project. I'm sure there is something called LD_PATH involved in all this... But I don't really know the specifics involved with CMake.
A little googling can help you do the above with CMake.
Hope that helps,
jrh
If you are installing the libraries with a package manager, they will probably all end up in the right place. If not you can get the compiler to search for the by providing the an additional search path using the -L <path> flag. You should be able to pass this extra flag to CMake.
Incidentally the -I <path> can be used to add an extra directory to search for include files.
I've been trying to get the boost library working with Code::Blocks and am having some trouble.
When I first tried to get boost, all I did was download the latest zip file and extract it into the CodeBlocks folder. Then I set the compiler settings to look in the boost folder. This allowed me to compile, but not to link. I then read the BoostWindowsQuickReference. I removed everything I had related to boost from my machine, and started fresh.
I followed the instructions step by step, and the only thing that didn't go exactly as the instructions said was that the install-proper folder with the include\boost inside of it was in C: and not my CodeBlocks folder. So I simply copied it (just in case for some reason it needed to be there) to the CodeBlocks folder, which I thought odd because I already had a boost_1_40_0 folder there from downloading the .zip.
I then tried to compile a program and it came up with the exact same error. Then I realized that I forgot to put in the link library (Ex: boost_regex-mgw44-mt-1_40.lib). Now I get
error: ld.exe||cannot find -lboost_regex-mgw44-mt-1_40.lib|
I have a few questions:
Obviously, what am I doing wrong?
Will I need to put in a link library every time I want to use a boost facility (everything is separated into different files, there isn't just one big project.)
Was it necessary to build the library with the boost-jam or could I have just extracted it and used it? (Probably a dumb question, but a small seed of doubt was planted when I got the exact same error.)
Should I try nuwen's MinGW Distro? (Would it make things any easier?)
If any clarification is needed I'd be happy to do so. Thanks.
Edit: and now I can't compile regular programs. So I'm just starting fresh again.
1, it should be -lboost_regex-mgw44-mt-1_40
2, Read the document, most boost library doesn't require to link library
3,4, You should compile it yourself, or try nuwen's MinGW ( I'd installed it and it worked fine )
BoostPro has Windows binaries available for the Boost libraries. If you download just the Boost sources, you will have to compile it, if you are using any of the libraries that are not header-only (such as boost regex). The BoostPro binaries will allow you to link to these without having to build anything.
On Windows it doesn't really matter where you "install" Boost to. Just get the .7z, compile using bjam.exe and pass it the options you need. It will create a folder called "bin.v2" and put the resulting libs in there. In Code::Blocks, all you need to do is edit the project options and point the search path to boost_1_40_0\boost and manually input the libraries to link against (those from bin.v2). It should just work then.
Do not use a precompiled Boost library.