Related
Is it better in C++ to pass by value or pass by reference-to-const?
I am wondering which is better practice. I realize that pass by reference-to-const should provide for better performance in the program because you are not making a copy of the variable.
It used to be generally recommended best practice1 to use pass by const ref for all types, except for builtin types (char, int, double, etc.), for iterators and for function objects (lambdas, classes deriving from std::*_function).
This was especially true before the existence of move semantics. The reason is simple: if you passed by value, a copy of the object had to be made and, except for very small objects, this is always more expensive than passing a reference.
With C++11, we have gained move semantics. In a nutshell, move semantics permit that, in some cases, an object can be passed “by value” without copying it. In particular, this is the case when the object that you are passing is an rvalue.
In itself, moving an object is still at least as expensive as passing by reference. However, in many cases a function will internally copy an object anyway — i.e. it will take ownership of the argument.2
In these situations we have the following (simplified) trade-off:
We can pass the object by reference, then copy internally.
We can pass the object by value.
“Pass by value” still causes the object to be copied, unless the object is an rvalue. In the case of an rvalue, the object can be moved instead, so that the second case is suddenly no longer “copy, then move” but “move, then (potentially) move again”.
For large objects that implement proper move constructors (such as vectors, strings …), the second case is then vastly more efficient than the first. Therefore, it is recommended to use pass by value if the function takes ownership of the argument, and if the object type supports efficient moving.
A historical note:
In fact, any modern compiler should be able to figure out when passing by value is expensive, and implicitly convert the call to use a const ref if possible.
In theory. In practice, compilers can’t always change this without breaking the function’s binary interface. In some special cases (when the function is inlined) the copy will actually be elided if the compiler can figure out that the original object won’t be changed through the actions in the function.
But in general the compiler can’t determine this, and the advent of move semantics in C++ has made this optimisation much less relevant.
1 E.g. in Scott Meyers, Effective C++.
2 This is especially often true for object constructors, which may take arguments and store them internally to be part of the constructed object’s state.
Edit: New article by Dave Abrahams on cpp-next: Want speed? Pass by value.
Pass by value for structs where the copying is cheap has the additional advantage that the compiler may assume that the objects don't alias (are not the same objects). Using pass-by-reference the compiler cannot assume that always. Simple example:
foo * f;
void bar(foo g) {
g.i = 10;
f->i = 2;
g.i += 5;
}
the compiler can optimize it into
g.i = 15;
f->i = 2;
since it knows that f and g doesn't share the same location. if g was a reference (foo &), the compiler couldn't have assumed that. since g.i could then be aliased by f->i and have to have a value of 7. so the compiler would have to re-fetch the new value of g.i from memory.
For more pratical rules, here is a good set of rules found in Move Constructors article (highly recommended reading).
If the function intends to change the argument as a side effect, take it by non-const reference.
If the function doesn't modify its argument and the argument is of primitive type, take it by value.
Otherwise take it by const reference, except in the following cases
If the function would then need to make a copy of the const reference anyway, take it by value.
"Primitive" above means basically small data types that are a few bytes long and aren't polymorphic (iterators, function objects, etc...) or expensive to copy. In that paper, there is one other rule. The idea is that sometimes one wants to make a copy (in case the argument can't be modified), and sometimes one doesn't want (in case one wants to use the argument itself in the function if the argument was a temporary anyway, for example). The paper explains in detail how that can be done. In C++1x that technique can be used natively with language support. Until then, i would go with the above rules.
Examples: To make a string uppercase and return the uppercase version, one should always pass by value: One has to take a copy of it anyway (one couldn't change the const reference directly) - so better make it as transparent as possible to the caller and make that copy early so that the caller can optimize as much as possible - as detailed in that paper:
my::string uppercase(my::string s) { /* change s and return it */ }
However, if you don't need to change the parameter anyway, take it by reference to const:
bool all_uppercase(my::string const& s) {
/* check to see whether any character is uppercase */
}
However, if you the purpose of the parameter is to write something into the argument, then pass it by non-const reference
bool try_parse(T text, my::string &out) {
/* try to parse, write result into out */
}
Depends on the type. You are adding the small overhead of having to make a reference and dereference. For types with a size equal or smaller than pointers that are using the default copy ctor, it would probably be faster to pass by value.
As it has been pointed out, it depends on the type. For built-in data types, it is best to pass by value. Even some very small structures, such as a pair of ints can perform better by passing by value.
Here is an example, assume you have an integer value and you want pass it to another routine. If that value has been optimized to be stored in a register, then if you want to pass it be reference, it first must be stored in memory and then a pointer to that memory placed on the stack to perform the call. If it was being passed by value, all that is required is the register pushed onto the stack. (The details are a bit more complicated than that given different calling systems and CPUs).
If you are doing template programming, you are usually forced to always pass by const ref since you don't know the types being passed in. Passing penalties for passing something bad by value are much worse than the penalties of passing a built-in type by const ref.
This is what i normally work by when designing the interface of a non-template function:
Pass by value if the function does not want to modify the parameter and the
value is cheap to copy (int, double, float, char, bool, etc... Notice that std::string, std::vector, and the rest of the containers in the standard library are NOT)
Pass by const pointer if the value is expensive to copy and the function does
not want to modify the value pointed to and NULL is a value that the function handles.
Pass by non-const pointer if the value is expensive to copy and the function
wants to modify the value pointed to and NULL is a value that the function handles.
Pass by const reference when the value is expensive to copy and the function does not want to modify the value referred to and NULL would not be a valid value if a pointer was used instead.
Pass by non-const reference when the value is expensive to copy and the function wants to modify the value referred to and NULL would not be a valid value if a pointer was used instead.
Sounds like you got your answer. Passing by value is expensive, but gives you a copy to work with if you need it.
As a rule passing by const reference is better.
But if you need to modify you function argument locally you should better use passing by value.
For some basic types the performance in general the same both for passing by value and by reference. Actually reference internally represented by pointer, that is why you can expect for instance that for pointer both passing are the same in terms of performance, or even passing by value can be faster because of needless dereference.
Pass by value for small types.
Pass by const references for big types (the definition of big can vary between machines) BUT, in C++11, pass by value if you are going to consume the data, since you can exploit move semantics. For example:
class Person {
public:
Person(std::string name) : name_(std::move(name)) {}
private:
std::string name_;
};
Now the calling code would do:
Person p(std::string("Albert"));
And only one object would be created and moved directly into member name_ in class Person. If you pass by const reference, a copy will have to be made for putting it into name_.
As a rule of thumb, value for non-class types and const reference for classes.
If a class is really small it's probably better to pass by value, but the difference is minimal. What you really want to avoid is passing some gigantic class by value and having it all duplicated - this will make a huge difference if you're passing, say, a std::vector with quite a few elements in it.
Pass by referece is better than pass by value. I was solving the longest common subsequence problem on Leetcode. It was showing TLE for pass by value but accepted the code for pass by reference. Took me 30 mins to figure this out.
Simple difference :- In function we have input and output parameter , so if your passing input and out parameter is same then use call by reference else if input and output parameter are different then better to use call by value .
example void amount(int account , int deposit , int total )
input parameter : account , deposit
output paramteter: total
input and out is different use call by vaule
void amount(int total , int deposit )
input total deposit
output total
Smart-pointers are generally tiny so passing by value isn't a problem, but is there any problem passing references to them; or rather are there specific cases where this mustn't be done?
I'm writing a wrapper library and several of my classes wrap smart-pointer objects in the underlying library... my classes are not smart-pointers but the APIs currently pass smart-pointer objects by value.
e.g current code:
void class::method(const AnimalPtr pAnimal) { ... }
becomes
void class::method(const MyAnimal &animal){...}
where MyAnimal is my new wrapper class encapsulating AnimalPtr.
There is no guarantee the Wrapper classes won't one day grow beyond wrapping a smart-pointer, so passing by value makes me nervous.
You should pass shared pointers by reference, not value, in most cases. While the size of a std::shared_ptr is small, the cost of copying involves an atomic operation (conceptually an atomic increment and an atomic decrement on destruction of the copy, although I believe that some implementations manage to do a non-atomic increment).
In other cases, for example std::unique_ptr you might prefer to pass by value, as the copy will have to be a move and it clearly documents that ownership of the object is transferred to the function (if you don't want to transfer ownership, then pass a reference to the real object, not the std::unique_ptr).
In other cases your mileage might vary. You need to be aware of what the semantics of copy are for your smart pointer, and whether you need to pay for the cost or not.
It's ok to pass a smart pointer by reference, except if it's to a constructor. In a constructor, it's possible to store a reference to the original object, which violates the contract of the smart pointers. You would likely get memory corruption if you did that. Even if your constructor does not today store the reference, I would still be wary because code changes and it's an easy thing to miss if you decide later you need to hold the variable longer.
In a normal function, you cannot store a function parameter as a reference anywhere because references must be set during their initialization. You could assign the reference to some longer-living non-reference variable, but that would be a copy and so would increase its lifetime appropriately. So in either case, you could not hold onto it past when the calling function might have freed it. In this case, you might get a small performance boost with a reference, but I wouldn't plan on noticing it in most cases.
So I would say - constructor, always pass by value; other functions, pass by reference if you want.
With C++ how do i decide if i should pass an argument by value or by reference/pointer? (tell me the answer for both 32 and 64bits) Lets take A. Is 2 32bit values more less or equal work as a pointer to a 32bit value?
B to me seems like i always should pass by value. C i think i should pass by value but someone told me (however i haven't seen proof) that processors don't handle values not their bitsize and so it is more work. So if i were passing them around would it be more work to pass by value thus byref is faster? Finally i threw in an enum. I think enums should always be by value
Note: When i say by ref i mean a const reference or pointer (can't forget the const...)
struct A { int a, b; }
struct B { int a; }
struct C { char a, b; }
enum D { a,b,c }
void fn(T a);
Now tell me the answer if i were pushing the parameters many times and the code doesn't use a tail call? (lets say the values isnt used until 4 or so calls deep)
Forget the stack size. You should pass by reference if you want to change it, otherwise you should pass by value.
Preventing the sort of bugs introduced by allowing functions to change your data unexpectedly is far more important than a few bytes of wasted stack space.
If stack space becomes a problem, stop using so many levels (such as replacing a recursive solution with an iterative one) or expand your stack. Four levels of recursion isn't usually that onerous, unless your structures are massive or you're operating in the embedded world.
If performance becomes a problem, find a faster algorithm :-) If that's not possible, then you can look at passing by reference, but you need to understand that it's breaking the contract between caller and callee. If you can live with that, that's okay. I generally can't :-)
The intent of the value/reference dichotomy is to control what happens to the thing you pass as a parameter at the language level, not to fiddle with the way an implementation of the language works.
I pass all parameters by reference for consistency, including builtins (of course, const is used where possible).
I did test this in performance critical domains -- worst case loss compared to builtins was marginal. Reference can be quite a bit faster, for non-builtins, and when the calls are deep (as a generalization). This was important for me as I was doing quite a bit of deep TMP, where function bodies were tiny.
You might consider breaking that convention if you're counting instructions, the hardware is register-starved (e.g. embedded), or if the function is not a good candidate for inlining.
Unfortunately, the question you ask is more complex than it appears -- the answer may vary greatly by your platform, ABI, calling conventions, register counts, etc.
A lot depends on your requirement but best practice is to pass by reference as it reduces the memory foot print.
If you pass large objects by value, a copy of it is made in memory andthe copy constructor is called for making a copy of this.
So it will take more machine cycles and also, if you pass by value, changes are not reflected in the original object.
So try passing them by reference.
Hope this has been helpful to you.
Regards, Ken
First, reference and pointers aren't the same.
Pass by pointer
Pass parameters by pointers if any/some of these apply:
The passed element could be null.
The resource is allocated inside the called function and the caller is responsible should be responsible for freeing such a resource. Remember in this case to provide a free() function for that resource.
The value is of a variable type, like for example void*. When it's type is determined at runtime or depending on the usage pattern (or hiding implementation - i.e Win32 HANDLE), such as a thread procedure argument. (Here favor c++ templates and std::function, and use pointers for this purpose only if your environment does not permit otherwise.
Pass by reference
Pass parameters by reference if any/some of these apply:
Most of the time. (prefer passing by const reference)
If you want the modifications to the passed arguments to be visible to the caller. (unless const reference is used).
If the passed argument is never null.
If you know what is the passed argument type and you have control over function's signature.
Pass by copy
Pass a copy if any/some of these apply:
Generally try to avoid this.
If you want to operate on a copy of the passed argument. i.e you know that the called function would create a copy anyway.
With primitive types smaller than the system's pointer size - as it makes no performance/memory difference compared to a const ref.
This is tricky - when you know that the type implements a move constructor (such as std::string in C++11). It then looks as if you're passing by copy.
Any of these three lists can go more longer, but these are - I would say - the basic rules of thumb.
Your complete question is a bit unclear to me, but I can answer when you would use passing by value or by reference.
When passing by value, you have a complete copy of the parameter into the call stack. It's like you're making a local variable in the function call initialized with whatever you passed into it.
When passing by reference, you... well, pass by reference. The main difference is that you can modify the external object.
There is the benefit of reducing memory load for large objects passing by reference. For basic data types (32-bit or 64-bit integers, for example), the performance is negligible.
Generally, if you're going to work in C/C++ you should learn to use pointers. Passing objects as parameters will almost always be passed via a pointer (vs reference). The few instances you absolutely must use references is in the copy constructor. You'll want to use it in the operators as well, but it's not required.
Copying objects by value is usually a bad idea - more CPU to do the constructor function; more memory for the actual object. Use const to prevent the function modifying the object. The function signature should tell the caller what might happen to the referenced object.
Things like int, char, pointers are usually passed by value.
As to the structures you outlined, passing by value will not really matter. You need to do profiling to find out, but on the grand scheme of a program you be better off looking elsewhere for increasing performance in terms of CPU and/or memory.
I would consider whether you want value or reference semantics before you go worrying about optimizations. Generally you would pass by reference if you want the method you are calling to be able to modify the parameter. You can pass a pointer in this case, like you would in C, but idiomatic C++ tends to use references.
There is no rule that says that small types or enums should always be passed by value. There is plenty of code that passes int& parameters, because they rely on the semantics of passing by reference. Also, you should keep in mind that for any relatively small data type, you won't notice a difference in speed between passing by reference and by value.
That said, if you have a very large structure, you probably don't want to make lots of copies of it. This is where const references are handy. Do keep in mind though that const in C++ is not strictly enforced (even if it's considered bad practice, you can always const_cast it away). There is no reason to pass a const int& over an int, although there is a reason to pass a const ClassWithManyMembers& over a ClassWithManyMembers.
All of the structs that you listed I would say are fine to pass by value if you are intending them to be treated as values. Consider that if you call a function that takes one parameter of type struct Rectangle{int x, y, w, h}, this is the same as passing those 4 parameters independently, which is really not a big deal. Generally you should be more worried about the work that the copy constructor has to do - for example, passing a vector by value is probably not such a good idea, because it will have to dynamically allocate memory and iterate through a list whose size you don't know, and invoke many more copy constructors.
While you should keep all this in mind, a good general rule is: if you want refence semantics, pass by refence. Otherwise, pass intrinsics by value, and other things by const reference.
Also, C++11 introduced r-value references which complicate things even further. But that's a different topic.
These are the rules that I use:
for native types:
by value when they are input arguments
by non-const reference when they are mandatory output arguments
for structs or classes:
by const reference when they are input arguments
by non-const reference when they are output arguments
for arrays:
by const pointer when they are input arguments (const applies to the data, not the pointer here, i.e. const TYPE *)
by pointer when they are output arguments (const applies to the data, not the pointer)
I've found that there are very few times that require making an exception to the above rules. The one exception that comes to mind is for a struct or class argument that is optional, in which case a reference would not work. In that case I use a const pointer (input) or a non-const pointer (output), so that you can also pass 0.
If you want a copy, then pass by value. If you want to change it and you want those changes to be seen outside the function, then pass by reference. If you want speed and don't want to change it, pass by const reference.
So, as we're all hopefully aware, in Object-oriented programming when the occasion comes when you need somehow access an instance of a class in another class's method, you turn to passing that instance through arguments.
I'm curious, what's the difference in terms of good practice / less prone to breaking things when it comes to either passing an Object, or a Pointer to that object?
Get into the habit of passing objects by reference.
void DoStuff(const vector<int>& values)
If you need to modify the original object, omit the const qualifier.
void DoStuff(vector<int>& values)
If you want to be able to accept an empty/nothing answer, pass it by pointer.
void DoStuff(vector<int>* values)
If you want to do stuff to a local copy, pass it by value.
void DoStuff(vector<int> values)
Problems will only really pop up when you introduce tons of concurrency. By that time, you will know enough to know when to not use certain passing techniques.
Pass a pointer to the object if you want to be able to indicate nonexistence (by passing a NULL).
Try not to pass by value for objects, as that invokes a copy constructor to create a local version of the object within the scope of the call function. Instead, pass by reference. However, there are two modes here. In order to get the exact same effective behavior of passing by value (immutable "copy") without the overhead, pass by const reference. If you feel you will need to alter the passed object, pass by (non-const) reference.
I choose const reference as a default. Of course, non-const if you must mutate the object for the client. Deviation from using references is rarely required.
Pointers are not very C++ - like, since references are available. References are nice because they are forbidden to refer to nothing. Update: To clarify, proper containers for types and arrays are preferred, but for some internal implementations, you will need to pass a pointer.
Objects/values, are completely different in semantics. If I need a copy, I will typically just create it inside the function where needed:
void method(const std::string& str) {
std::string myCopy(str);
...
In fact what you can pass to a method is a pointer to object, a reference to the object and a copy of the object and all of these can also be constant. Depending on your needs you should choose the one that best suits your needs.
First descision you can make is whether the thing you pass should be able to change in your method or not. If you do not intend to change it then a const reference in probably the best alternative(by not changing I also mean you do not intend to call any non-const methods of that object). What are the advantages to that? You safe time for compying the object and also the method signature itself will say "I will not change that parameter".
If you have to change this object you can pass either a reference or a pointer to it. It is not very obligatory to choose just one of these options so you can go for either. The only difference I can think of is that pointer can be NULL(i.e. not pointing to any object at all) while a reference is always pointing to an existent object.
If what you need in your method is a copy of your object, then what you should pass a copy of the object(not a reference and not a pointer). For instance if your method looks like
void Foo(const A& a) {
A temp = a;
}
Then that is a clear indication that passing a copy is a better alternative.
Hope this makes things a bit clearer.
Actually, there's really no good reason for passing a pointer to an object, unless you want to somehow indicate that no object exists.
If you want to change the object, pass a reference to it. If you want to protect it from change within the function, pass it by value or at least const reference.
Some people pass by reference for the speed improvements (passing only an address of a large structure rather than the structure itself for example) but I don't agree with that. In most cases, I'd prefer my software to be safe than fast, a corollary of the saying: "you can't get any less optimised than wrong". :-)
Object-oriented programming is about polymorphism, Liskov Substitution Principle, old code calling new code, you name it. Pass a concrete (derived) object to a routine that works with more abstract (base) objects. If you are not doing that, you are not doing OOP.
This is only achievable when passing references or pointers. Passing by value is best reserved for, um, values.
It is useful to distinguish between values and objects. Values are always concrete, there's no polymorphism. They are often immutable. 5 is 5 and "abc" is "abc". You can pass them by value or by (const) reference.
Objects are always abstract to some degree. Given an object, one can almost always refine it to a more concrete object. A RectangularArea could be a Drawable which could be a Window which could be a ToplevelWindow which could be a ManagedWindow which could be... These must be passed by reference.
Pointers are a wholly separate can of worms. In my experience, naked pointers are best avoided. Use a smart pointer that cannot be NULL. If you need an optional argument, use an explicit optional class template such as boost::optional.
Is it better in C++ to pass by value or pass by reference-to-const?
I am wondering which is better practice. I realize that pass by reference-to-const should provide for better performance in the program because you are not making a copy of the variable.
It used to be generally recommended best practice1 to use pass by const ref for all types, except for builtin types (char, int, double, etc.), for iterators and for function objects (lambdas, classes deriving from std::*_function).
This was especially true before the existence of move semantics. The reason is simple: if you passed by value, a copy of the object had to be made and, except for very small objects, this is always more expensive than passing a reference.
With C++11, we have gained move semantics. In a nutshell, move semantics permit that, in some cases, an object can be passed “by value” without copying it. In particular, this is the case when the object that you are passing is an rvalue.
In itself, moving an object is still at least as expensive as passing by reference. However, in many cases a function will internally copy an object anyway — i.e. it will take ownership of the argument.2
In these situations we have the following (simplified) trade-off:
We can pass the object by reference, then copy internally.
We can pass the object by value.
“Pass by value” still causes the object to be copied, unless the object is an rvalue. In the case of an rvalue, the object can be moved instead, so that the second case is suddenly no longer “copy, then move” but “move, then (potentially) move again”.
For large objects that implement proper move constructors (such as vectors, strings …), the second case is then vastly more efficient than the first. Therefore, it is recommended to use pass by value if the function takes ownership of the argument, and if the object type supports efficient moving.
A historical note:
In fact, any modern compiler should be able to figure out when passing by value is expensive, and implicitly convert the call to use a const ref if possible.
In theory. In practice, compilers can’t always change this without breaking the function’s binary interface. In some special cases (when the function is inlined) the copy will actually be elided if the compiler can figure out that the original object won’t be changed through the actions in the function.
But in general the compiler can’t determine this, and the advent of move semantics in C++ has made this optimisation much less relevant.
1 E.g. in Scott Meyers, Effective C++.
2 This is especially often true for object constructors, which may take arguments and store them internally to be part of the constructed object’s state.
Edit: New article by Dave Abrahams on cpp-next: Want speed? Pass by value.
Pass by value for structs where the copying is cheap has the additional advantage that the compiler may assume that the objects don't alias (are not the same objects). Using pass-by-reference the compiler cannot assume that always. Simple example:
foo * f;
void bar(foo g) {
g.i = 10;
f->i = 2;
g.i += 5;
}
the compiler can optimize it into
g.i = 15;
f->i = 2;
since it knows that f and g doesn't share the same location. if g was a reference (foo &), the compiler couldn't have assumed that. since g.i could then be aliased by f->i and have to have a value of 7. so the compiler would have to re-fetch the new value of g.i from memory.
For more pratical rules, here is a good set of rules found in Move Constructors article (highly recommended reading).
If the function intends to change the argument as a side effect, take it by non-const reference.
If the function doesn't modify its argument and the argument is of primitive type, take it by value.
Otherwise take it by const reference, except in the following cases
If the function would then need to make a copy of the const reference anyway, take it by value.
"Primitive" above means basically small data types that are a few bytes long and aren't polymorphic (iterators, function objects, etc...) or expensive to copy. In that paper, there is one other rule. The idea is that sometimes one wants to make a copy (in case the argument can't be modified), and sometimes one doesn't want (in case one wants to use the argument itself in the function if the argument was a temporary anyway, for example). The paper explains in detail how that can be done. In C++1x that technique can be used natively with language support. Until then, i would go with the above rules.
Examples: To make a string uppercase and return the uppercase version, one should always pass by value: One has to take a copy of it anyway (one couldn't change the const reference directly) - so better make it as transparent as possible to the caller and make that copy early so that the caller can optimize as much as possible - as detailed in that paper:
my::string uppercase(my::string s) { /* change s and return it */ }
However, if you don't need to change the parameter anyway, take it by reference to const:
bool all_uppercase(my::string const& s) {
/* check to see whether any character is uppercase */
}
However, if you the purpose of the parameter is to write something into the argument, then pass it by non-const reference
bool try_parse(T text, my::string &out) {
/* try to parse, write result into out */
}
Depends on the type. You are adding the small overhead of having to make a reference and dereference. For types with a size equal or smaller than pointers that are using the default copy ctor, it would probably be faster to pass by value.
As it has been pointed out, it depends on the type. For built-in data types, it is best to pass by value. Even some very small structures, such as a pair of ints can perform better by passing by value.
Here is an example, assume you have an integer value and you want pass it to another routine. If that value has been optimized to be stored in a register, then if you want to pass it be reference, it first must be stored in memory and then a pointer to that memory placed on the stack to perform the call. If it was being passed by value, all that is required is the register pushed onto the stack. (The details are a bit more complicated than that given different calling systems and CPUs).
If you are doing template programming, you are usually forced to always pass by const ref since you don't know the types being passed in. Passing penalties for passing something bad by value are much worse than the penalties of passing a built-in type by const ref.
This is what i normally work by when designing the interface of a non-template function:
Pass by value if the function does not want to modify the parameter and the
value is cheap to copy (int, double, float, char, bool, etc... Notice that std::string, std::vector, and the rest of the containers in the standard library are NOT)
Pass by const pointer if the value is expensive to copy and the function does
not want to modify the value pointed to and NULL is a value that the function handles.
Pass by non-const pointer if the value is expensive to copy and the function
wants to modify the value pointed to and NULL is a value that the function handles.
Pass by const reference when the value is expensive to copy and the function does not want to modify the value referred to and NULL would not be a valid value if a pointer was used instead.
Pass by non-const reference when the value is expensive to copy and the function wants to modify the value referred to and NULL would not be a valid value if a pointer was used instead.
Sounds like you got your answer. Passing by value is expensive, but gives you a copy to work with if you need it.
As a rule passing by const reference is better.
But if you need to modify you function argument locally you should better use passing by value.
For some basic types the performance in general the same both for passing by value and by reference. Actually reference internally represented by pointer, that is why you can expect for instance that for pointer both passing are the same in terms of performance, or even passing by value can be faster because of needless dereference.
Pass by value for small types.
Pass by const references for big types (the definition of big can vary between machines) BUT, in C++11, pass by value if you are going to consume the data, since you can exploit move semantics. For example:
class Person {
public:
Person(std::string name) : name_(std::move(name)) {}
private:
std::string name_;
};
Now the calling code would do:
Person p(std::string("Albert"));
And only one object would be created and moved directly into member name_ in class Person. If you pass by const reference, a copy will have to be made for putting it into name_.
As a rule of thumb, value for non-class types and const reference for classes.
If a class is really small it's probably better to pass by value, but the difference is minimal. What you really want to avoid is passing some gigantic class by value and having it all duplicated - this will make a huge difference if you're passing, say, a std::vector with quite a few elements in it.
Pass by referece is better than pass by value. I was solving the longest common subsequence problem on Leetcode. It was showing TLE for pass by value but accepted the code for pass by reference. Took me 30 mins to figure this out.
Simple difference :- In function we have input and output parameter , so if your passing input and out parameter is same then use call by reference else if input and output parameter are different then better to use call by value .
example void amount(int account , int deposit , int total )
input parameter : account , deposit
output paramteter: total
input and out is different use call by vaule
void amount(int total , int deposit )
input total deposit
output total