Related
Rather than testing all the or statements, it will see if the first character matches. The title explains it all.
When a regex is processed, it first converted to a non-deterministic finite-state automaton (NFA). Then, the NFA is converted to a deterministic finite-state automaton (DFA) which typically results in a larger number of states. The third step is to convert the DFA into a "minimal" DFA with the fewest number of states.
Two regexes are equivalent if and only if they result in identical minimal DFAs. Hence, the two regexes ab|ac|an|db|df and (a(b|c|n)|d(b|f)) which are clearly equivalent result in the same minimal DFA and will perform pattern matching at the same speed. There is no particular reason to prefer one over the other.
I am looking for a non-technical explanation of the difference between DFA vs NFA engines, based on their capabilities and limitations.
Deterministic Finite Automatons (DFAs) and Nondeterministic Finite Automatons (NFAs) have exactly the same capabilities and limitations. The only difference is notational convenience.
A finite automaton is a processor that has states and reads input, each input character potentially setting it into another state. For example, a state might be "just read two Cs in a row" or "am starting a word". These are usually used for quick scans of text to find patterns, such as lexical scanning of source code to turn it into tokens.
A deterministic finite automaton is in one state at a time, which is implementable. A nondeterministic finite automaton can be in more than one state at a time: for example, in a language where identifiers can begin with a digit, there might be a state "reading a number" and another state "reading an identifier", and an NFA could be in both at the same time when reading something starting "123". Which state actually applies would depend on whether it encountered something not numeric before the end of the word.
Now, we can express "reading a number or identifier" as a state itself, and suddenly we don't need the NFA. If we express combinations of states in an NFA as states themselves, we've got a DFA with a lot more states than the NFA, but which does the same thing.
It's a matter of which is easier to read or write or deal with. DFAs are easier to understand per se, but NFAs are generally smaller.
Here's a non-technical answer from Microsoft:
DFA engines run in linear time because they do not require backtracking (and thus they never test the same character twice). They can also guarantee matching the longest possible string. However, since a DFA engine contains only finite state, it cannot match a pattern with backreferences, and because it does not construct an explicit expansion, it cannot capture subexpressions.
Traditional NFA engines run so-called "greedy" match backtracking algorithms, testing all possible expansions of a regular expression in a specific order and accepting the first match. Because a traditional NFA constructs a specific expansion of the regular expression for a successful match, it can capture subexpression matches and matching backreferences. However, because a traditional NFA backtracks, it can visit exactly the same state multiple times if the state is arrived at over different paths. As a result, it can run exponentially slowly in the worst case. Because a traditional NFA accepts the first match it finds, it can also leave other (possibly longer) matches undiscovered.
POSIX NFA engines are like traditional NFA engines, except that they continue to backtrack until they can guarantee that they have found the longest match possible. As a result, a POSIX NFA engine is slower than a traditional NFA engine, and when using a POSIX NFA you cannot favor a shorter match over a longer one by changing the order of the backtracking search.
Traditional NFA engines are favored by programmers because they are more expressive than either DFA or POSIX NFA engines. Although in the worst case they can run slowly, you can steer them to find matches in linear or polynomial time using patterns that reduce ambiguities and limit backtracking.
[http://msdn.microsoft.com/en-us/library/0yzc2yb0.aspx]
A simple, nontechnical explanation, paraphrased from Jeffrey Friedl's book Mastering Regular Expressions.
CAVEAT:
While this book is generally considered the "regex bible", there appears some controversy as to whether the distinction made here between DFA and NFA is actually correct. I'm not a computer scientist, and I don't understand most of the theory behind what really is a "regular" expression, deterministic or not. After the controversy started, I deleted this answer because of this, but since then it has been referenced in comments to other answers. I would be very interested in discussing this further - can it be that Friedl really is wrong? Or did I get Friedl wrong (but I reread that chapter yesterday evening, and it's just like I remembered...)?
Edit: It appears that Friedl and I are indeed wrong. Please check out Eamon's excellent comments below.
Original answer:
A DFA engine steps through the input string character by character and tries (and remembers) all possible ways the regex could match at this point. If it reaches the end of the string, it declares success.
Imagine the string AAB and the regex A*AB. We now step through our string letter by letter.
A:
First branch: Can be matched by A*.
Second branch: Can be matched by ignoring the A* (zero repetitions are allowed) and using the second A in the regex.
A:
First branch: Can be matched by expanding A*.
Second branch: Can't be matched by B. Second branch fails. But:
Third branch: Can be matched by not expanding A* and using the second A instead.
B:
First branch: Can't be matched by expanding A* or by moving on in the regex to the next token A. First branch fails.
Third branch: Can be matched. Hooray!
A DFA engine never backtracks in the string.
An NFA engine steps through the regex token by token and tries all possible permutations on the string, backtracking if necessary. If it reaches the end of the regex, it declares success.
Imagine the same string and the same regex as before. We now step through our regex token by token:
A*: Match AA. Remember the backtracking positions 0 (start of string) and 1.
A: Doesn't match. But we have a backtracking position we can return to and try again. The regex engine steps back one character. Now A matches.
B: Matches. End of regex reached (with one backtracking position to spare). Hooray!
Both NFAs and DFAs are finite automata, as their names say.
Both can be represented as a starting state, a success (or "accept") state (or set of success states), and a state table listing transitions.
In the state table of a DFA, each <state₀, input> key will transit to one and only one state₁.
In the state table of an NFA, each <state₀, input> will transit to a set of states.
When you take a DFA, reset it to it's start state, give it a sequence of input symbols, and you will know exactly what end state it's in and whether it's a success state or not.
When you take an NFA, however, it will, for each input symbol, look up the set of possible result states, and (in theory) randomly, "nondeterministically," select one of them. If there exists a sequence of random selections which leads to one of the success states for that input string, then the NFA is said to succeed for that string. In other words, you are expected to pretend that it magically always selects the right one.
One early question in computing was whether NFAs were more powerful than DFAs, due to that magic, and the answer turned out to be no since any NFA could be translated into an equivalent DFA. Their capabilities and limitations are exactly precisely the same as one another.
For those wondering how real, non-magical, NFA engine can "magically" select the right successor state for a given symbol, this page describes the two common approaches.
I find the explanation given in Regular Expressions, The Complete Tutorial by Jan Goyvaerts to be the most usable. See page 7 of this PDF:
https://www.princeton.edu/~mlovett/reference/Regular-Expressions.pdf
Among other points made on page 7, There are two kinds of regular expression engines: text-directed engines, and regex-directed engines. Jeffrey Friedl calls them DFA and NFA engines, respectively. ...certain very useful features, such as lazy quantifiers and backreferences, can only be implemented in regex-directed engines.
There are some features in modern regex engines which allow you to match languages that couldn't be matched without that feature. For example the following regex using back references matches the language of all strings that consist of a word that repeats itself: (.+)\1. This language is not regular and can't be matched by a regex that does not use back references.
Does lookaround also affect which languages can be matched by a regular expression? I.e. are there any languages that can be matched using lookaround that couldn't be matched otherwise? If so, is this true for all flavors of lookaround (negative or positive lookahead or lookbehind) or just for some of them?
The answer to the question you ask, which is whether a larger class of languages than the regular languages can be recognised with regular expressions augmented by lookaround, is no.
A proof is relatively straightforward, but an algorithm to translate a regular expression containing lookarounds into one without is messy.
First: note that you can always negate a regular expression (over a finite alphabet). Given a finite state automaton that recognises the language generated by the expression, you can simply exchange all the accepting states for non-accepting states to get an FSA that recognises exactly the negation of that language, for which there are a family of equivalent regular expressions.
Second: because regular languages (and hence regular expressions) are closed under negation they are also closed under intersection since A intersect B = neg ( neg(A) union neg(B)) by de Morgan's laws. In other words given two regular expressions, you can find another regular expression that matches both.
This allows you to simulate lookaround expressions. For example u(?=v)w matches only expressions that will match uv and uw.
For negative lookahead you need the regular expression equivalent of the set theoretic A\B, which is just A intersect (neg B) or equivalently neg (neg(A) union B). Thus for any regular expressions r and s you can find a regular expression r-s which matches those expressions that match r which do not match s. In negative lookahead terms: u(?!v)w matches only those expressions which match uw - uv.
There are two reasons why lookaround is useful.
First, because the negation of a regular expression can result in something much less tidy. For example q(?!u)=q($|[^u]).
Second, regular expressions do more than match expressions, they also consume characters from a string - or at least that's how we like to think about them. For example in python I care about the .start() and .end(), thus of course:
>>> re.search('q($|[^u])', 'Iraq!').end()
5
>>> re.search('q(?!u)', 'Iraq!').end()
4
Third, and I think this is a pretty important reason, negation of regular expressions does not lift nicely over concatenation. neg(a)neg(b) is not the same thing as neg(ab), which means that you cannot translate a lookaround out of the context in which you find it - you have to process the whole string. I guess that makes it unpleasant for people to work with and breaks people's intuitions about regular expressions.
I hope I have answered your theoretical question (its late at night, so forgive me if I am unclear). I agree with a commentator who said that this does have practical applications. I met very much the same problem when trying to scrape some very complicated web pages.
EDIT
My apologies for not being clearer: I do not believe you can give a proof of regularity of regular expressions + lookarounds by structural induction, my u(?!v)w example was meant to be just that, an example, and an easy one at that. The reason a structural induction won't work is because lookarounds behave in a non-compositional way - the point I was trying to make about negations above. I suspect any direct formal proof is going to have lots of messy details. I have tried to think of an easy way to show it but cannot come up with one off the top of my head.
To illustrate using Josh's first example of ^([^a]|(?=..b))*$ this is equivalent to a 7 state DFSA with all states accepting:
A - (a) -> B - (a) -> C --- (a) --------> D
Λ | \ |
| (not a) \ (b)
| | \ |
| v \ v
(b) E - (a) -> F \-(not(a)--> G
| <- (b) - / |
| | |
| (not a) |
| | |
| v |
\--------- H <-------------------(b)-----/
The regular expression for state A alone looks like:
^(a([^a](ab)*[^a]|a(ab|[^a])*b)b)*$
In other words any regular expression you are going to get by eliminating lookarounds will in general be much longer and much messier.
To respond to Josh's comment - yes I do think the most direct way to prove the equivalence is via the FSA. What makes this messier is that the usual way to construct an FSA is via a non-deterministic machine - its much easier to express u|v as simply the machine constructed from machines for u and v with an epsilon transition to the two of them. Of course this is equivalent to a deterministic machine, but at the risk of exponential blow-up of states. Whereas negation is much easier to do via a deterministic machine.
The general proof will involve taking the cartesian product of two machines and selecting those states you wish to retain at each point you want to insert a lookaround. The example above illustrates what I mean to some extent.
My apologies for not supplying a construction.
FURTHER EDIT:
I have found a blog post which describes an algorithm for generating a DFA out of a regular expression augmented with lookarounds. Its neat because the author extends the idea of an NFA-e with "tagged epsilon transitions" in the obvious way, and then explains how to convert such an automaton into a DFA.
I thought something like that would be a way to do it, but I'm pleased that someone has written it up. It was beyond me to come up with something so neat.
As the other answers claim, lookarounds don't add any extra power to regular expressions.
I think we can show this using the following:
One Pebble 2-NFA (see the Introduction section of the paper which refers to it).
The 1-pebble 2NFA does not deal with nested lookaheads, but, we can use a variant of multi-pebble 2NFAs (see section below).
Introduction
A 2-NFA is a non deterministic finite automaton which has the ability to move either left or right on it's input.
A one pebble machine is where the machine can place a pebble on the input tape (i.e. mark a specific input symbol with a pebble) and do possibly different transitions based on whether there is a pebble at the current input position or not.
It is known the One Pebble 2-NFA has the same power as a regular DFA.
Non-nested Lookaheads
The basic idea is as follows:
The 2NFA allows us to backtrack (or 'front track') by moving forward or backward in the input tape. So for a lookahead we can do the match for the lookahead regular expression and then backtrack what we have consumed, in matching the lookahead expression. In order to know exactly when to stop backtracking, we use the pebble! We drop the pebble before we enter the dfa for the lookahead to mark the spot where the backtracking needs to stop.
Thus at the end of running our string through the pebble 2NFA, we know whether we matched the lookahead expression or not and the input left (i.e. what is left to be consumed) is exactly what is required to match the remaining.
So for a lookahead of the form u(?=v)w
We have the DFAs for u, v and w.
From the accepting state (yes, we can assume there is only one) of DFA for u, we make an e-transition to the start state of v, marking the input with a pebble.
From an accepting state for v, we e-transtion to a state which keeps moving the input left, till it finds a pebble, and then transitions to start state of w.
From a rejecting state of v, we e-transition to a state which keeps moving left until it finds the pebble, and transtions to the accepting state of u (i.e where we left off).
The proof used for regular NFAs to show r1 | r2, or r* etc, carry over for these one pebble 2nfas. See http://www.coli.uni-saarland.de/projects/milca/courses/coal/html/node41.html#regularlanguages.sec.regexptofsa for more info on how the component machines are put together to give the bigger machine for the r* expression etc.
The reason why the above proofs for r* etc work is that the backtracking ensures that the input pointer is always at the right spot, when we enter the component nfas for repetition. Also, if a pebble is in use, then it is being processed by one of the lookahead component machines. Since there are no transitions from lookahead machine to lookahead machine without completely backtracking and getting back the pebble, a one pebble machine is all that is needed.
For eg consider ([^a] | a(?=...b))*
and the string abbb.
We have abbb which goes through the peb2nfa for a(?=...b), at the end of which we are at the state: (bbb, matched) (i.e in input bbb is remaining, and it has matched 'a' followed by '..b'). Now because of the *, we go back to the beginning (see the construction in the link above), and enter the dfa for [^a]. Match b, go back to beginning, enter [^a] again two times, and then accept.
Dealing with Nested Lookaheads
To handle nested lookaheads we can use a restricted version of k-pebble 2NFA as defined here: Complexity Results for Two-Way and Multi-Pebble Automata and their Logics (see Definition 4.1 and Theorem 4.2).
In general, 2 pebble automata can accept non-regular sets, but with the following restrictions, k-pebble automata can be shown to be regular (Theorem 4.2 in above paper).
If the pebbles are P_1, P_2, ..., P_K
P_{i+1} may not be placed unless P_i is already on the tape and P_{i} may not be picked up unless P_{i+1} is not on the tape. Basically the pebbles need to be used in a LIFO fashion.
Between the time P_{i+1} is placed and the time that either P_{i} is picked up or P_{i+2} is placed, the automaton can traverse only the subword located between the current location of P_{i} and the end of the input word that lies in the direction of P_{i+1}. Moreover, in this sub-word, the automaton can act only as a 1-pebble automaton with Pebble P_{i+1}. In particular it is not allowed to lift up, place or even sense the presence of another pebble.
So if v is a nested lookahead expression of depth k, then (?=v) is a nested lookahead expression of depth k+1. When we enter a lookahead machine within, we know exactly how many pebbles have to have been placed so far and so can exactly determine which pebble to place and when we exit that machine, we know which pebble to lift. All machines at depth t are entered by placing pebble t and exited (i.e. we return to processing of a depth t-1 machine) by removing pebble t. Any run of the complete machine looks like a recursive dfs call of a tree and the above two restrictions of the multi-pebble machine can be catered to.
Now when you combine expressions, for rr1, since you concat, the pebble numbers of r1 must be incremented by the depth of r. For r* and r|r1 the pebble numbering remains the same.
Thus any expression with lookaheads can be converted to an equivalent multi-pebble machine with the above restrictions in pebble placement and so is regular.
Conclusion
This basically addresses the drawback in Francis's original proof: being able to prevent the lookahead expressions from consuming anything which are required for future matches.
Since Lookbehinds are just finite string (not really regexs) we can deal with them first, and then deal with the lookaheads.
Sorry for the incomplete writeup, but a complete proof would involve drawing a lot of figures.
It looks right to me, but I will be glad to know of any mistakes (which I seem to be fond of :-)).
I agree with the other posts that lookaround is regular (meaning that it does not add any fundamental capability to regular expressions), but I have an argument for it that is simpler IMO than the other ones I have seen.
I will show that lookaround is regular by providing a DFA construction. A language is regular if and only if it has a DFA that recognizes it. Note that Perl doesn't actually use DFAs internally (see this paper for details: http://swtch.com/~rsc/regexp/regexp1.html) but we construct a DFA for purposes of the proof.
The traditional way of constructing a DFA for a regular expression is to first build an NFA using Thompson's Algorithm. Given two regular expressions fragments r1 and r2, Thompson's Algorithm provides constructions for concatenation (r1r2), alternation (r1|r2), and repetition (r1*) of regular expressions. This allows you to build a NFA bit by bit that recognizes the original regular expression. See the paper above for more details.
To show that positive and negative lookahead are regular, I will provide a construction for concatenation of a regular expression u with positive or negative lookahead: (?=v) or (?!v). Only concatenation requires special treatment; the usual alternation and repetition constructions work fine.
The construction is for both u(?=v) and u(?!v) is:
In other words, connect every final state of the existing NFA for u to both an accept state and to an NFA for v, but modified as follows. The function f(v) is defined as:
Let aa(v) be a function on an NFA v that changes every accept state into an "anti-accept state". An anti-accept state is defined to be a state that causes the match to fail if any path through the NFA ends in this state for a given string s, even if a different path through v for s ends in an accept state.
Let loop(v) be a function on an NFA v that adds a self-transition on any accept state. In other words, once a path leads to an accept state, that path can stay in the accept state forever no matter what input follows.
For negative lookahead, f(v) = aa(loop(v)).
For positive lookahead, f(v) = aa(neg(v)).
To provide an intuitive example for why this works, I will use the regex (b|a(?:.b))+, which is a slightly simplified version of the regex I proposed in the comments of Francis's proof. If we use my construction along with the traditional Thompson constructions, we end up with:
The es are epsilon transitions (transitions that can be taken without consuming any input) and the anti-accept states are labeled with an X. In the left half of the graph you see the representation of (a|b)+: any a or b puts the graph in an accept state, but also allows a transition back to the begin state so we can do it again. But note that every time we match an a we also enter the right half of the graph, where we are in anti-accept states until we match "any" followed by a b.
This is not a traditional NFA because traditional NFAs don't have anti-accept states. However we can use the traditional NFA->DFA algorithm to convert this into a traditional DFA. The algorithm works like usual, where we simulate multiple runs of the NFA by making our DFA states correspond to subsets of the NFA states we could possibly be in. The one twist is that we slightly augment the rule for deciding if a DFA state is an accept (final) state or not. In the traditional algorithm a DFA state is an accept state if any of the NFA states was an accept state. We modify this to say that a DFA state is an accept state if and only if:
= 1 NFA states is an accept state, and
0 NFA states are anti-accept states.
This algorithm will give us a DFA that recognizes the regular expression with lookahead. Ergo, lookahead is regular. Note that lookbehind requires a separate proof.
I have a feeling that there are two distinct questions being asked here:
Are Regex engines that encorporate "lookaround" more
powerful than Regex engines that don't?
Does "lookaround"
empower a Regex engine with the ability to parse languages that are
more complex than those generated from a Chomsky Type 3 - Regular grammar?
The answer to the first question in a practical sense is yes. Lookaround will give a Regex engine that
uses this feature fundamentally more power than one that doesn't. This is because
it provides a richer set of "anchors" for the matching process.
Lookaround lets you define an entire Regex as a possible anchor point (zero width assertion). You can
get a pretty good overview of the power of this feature here.
Lookaround, although powerful, does not lift the Regex engine beyond the theoretical
limits placed on it by a Type 3 Grammar. For example, you will never be able to reliably
parse a language based on a Context Free - Type 2 Grammar using a Regex engine
equipped with lookaround. Regex engines are limited to the power of a Finite State Automation
and this fundamentally restricts the expressiveness of any language they can parse to the level of a Type 3 Grammar. No matter
how many "tricks" are added to your Regex engine, languages generated via a Context Free Grammar
will always remain beyond its capabilities. Parsing Context Free - Type 2 grammar requires pushdown automation to "remember" where it is in
a recursive language construct. Anything that requires a recursive evaluation of the grammar rules cannot be parsed using
Regex engines.
To summarize: Lookaround provides some practical benefits to Regex engines but does not "alter the game" on a
theoretical level.
EDIT
Is there some grammar with a complexity somewhere between Type 3 (Regular) and Type 2 (Context Free)?
I believe the answer is no. The reason is because there is no theoretical limit
placed on the size of the NFA/DFA needed to describe a Regular language. It may become arbitrarily large
and therefore impractical to use (or specify). This is where dodges such as "lookaround" are useful. They
provide a short-hand mechanism to specify what would otherwise lead to very large/complex NFA/DFA
specifications. They do not increase the expressiveness of
Regular languages, they just make specifying them more practical. Once you get this point, it becomes
clear that there are a lot of "features" that could be added to Regex engines to make them more
useful in a practical sense - but nothing will make them capable of going beyond the
limits of a Regular language.
The basic difference between a Regular and a Context Free language is that a Regular language
does not contain recursive elements. In order to evaluate a recursive language you need a
Push Down Automation
to "remember" where you are in the recursion. An NFA/DFA does not stack state information so cannot
handle the recursion. So given a non-recursive language definition there will be some NFA/DFA (but
not necessarily a practical Regex expression) to describe it.
I have a given DFA that represent a regular expression.
I want to match the DFA against an input stream and get all possible matches back, not only the leastmost-longest match.
For example:
regex: a*ba|baa
input: aaaaabaaababbabbbaa
result:
aaaaaba
aaba
ba
baa
Assumptions
Based on your question and later comments you want a general method for splitting a sentence into non-overlapping, matching substrings, with non-matching parts of the sentence discarded. You also seem to want optimal run-time performance. Also I assume you have an existing algorithm to transform a regular expression into DFA form already. I further assume that you are doing this by the usual method of first constructing an NFA and converting it by subset construction to DFA, since I'm not aware of any other way of accomplishing this.
Before you go chasing after shadows, make sure your trying to apply the right tool for the job. Any discussion of regular expressions is almost always muddied by the fact that folks use regular expressions for a lot more things than they are really optimal for. If you want to receive the benefits of regular expressions, be sure you're using a regular expression, and not something broader. If what you want to do can't be somewhat coded into a regular expression itself, then you can't benefit from the advantages of regular expression algorithms (fully)
An obvious example is that no amount of cleverness will allow a FSM, or any algorithm, to predict the future. For instance, an expression like (a*b)|(a), when matched against the string aaa... where the ellipsis is the portion of the expression not yet scanned because the user has not typed them yet, cannot give you every possible right subgroup.
For a more detailed discussion of Regular expression implementations, and specifically Thompson NFA's please check this link, which describes a simple C implementation with some clever optimizations.
Limitations of Regular Languages
The O(n) and Space(O(1)) guarantees of regular expression algorithms is a fairly narrow claim. Specifically, a regular language is the set of all languages that can be recognized in constant space. This distinction is important. Any kind of enhancement to the algorithm that does something more sophisticated than accepting or rejecting a sentence is likely to operate on a larger set of languages than regular. On top of that, if you can show that some enhancement requires greater than constant space to implement, then you are also outside of the performance guarantee. That being said, we can still do an awful lot if we are very careful to keep our algorithm within these narrow constraints.
Obviously that eliminates anything we might want to do with recursive backtracking. A stack does not have constant space. Even maintaining pointers into the sentence would be verboten, since we don't know how long the sentence might be. A long enough sentence would overflow any integer pointer. We can't create new states for the automaton as we go to get around this. All possible states (and a few impossible ones) must be predictable before exposing the recognizer to any input, and that quantity must be bounded by some constant, which may vary for the specific language we want to match, but by no other variable.
This still allows some room for adding additonal behavior. The usual way of getting more mileage is to add some extra annotations for where certain events in processing occur, such as when a subexpression started or stopped matching. Since we are only allowed to have constant space processing, that limits the number of subexpression matches we can process. This usually means the latest instance of that subexpression. This is why, when you ask for the subgrouped matched by (a|)*, you always get an empty string, because any sequence of a's is implicitly followed by infinitely many empty strings.
The other common enhancement is to do some clever thing between states. For example, in perl regex, \b matches the empty string, but only if the previous character is a word character and the next is not, or visa versa. Many simple assertions fit this, including the common line anchor operators, ^ and $. Lookahead and lookbehind assertions are also possible, but much more difficult.
When discussing the differences between various regular language recognizers, it's worth clarifying if we're talking about match recognition or search recognition, the former being an accept only if the entire sentence is in the language, and the latter accepts if any substring in the sentence is in the language. These are equivalent in the sense that if some expression E is accepted by the search method, then .*(E).* is accepted in the match method.
This is important because we might want to make it clear whether an expression like a*b|a accepts aa or not. In the search method, it does. Either token will match the right side of the disjunction. It doesn't match, though, because you could never get that sentence by stepping through the expression and generating tokens from the transitions, at least in a single pass. For this reason, i'm only going to talk about match semantics. Obviously if you want search semantics, you can modify the expression with .*'s
Note: A language defined by expression E|.* is not really a very manageable language, regardless of the sublanguage of E because it matches all possible sentences. This represents a real challenge for regular expression recognizers because they are really only suited to recognizing a language or else confirming that a sentence is not in that same language, rather than doing any more specific work.
Implementation of Regular Language Recognizers
There are generally three ways to process a regular expression. All three start the same, by transforming the expression into an NFA. This process produces one or two states for each production rule in the original expression. The rules are extemely simple. Here's some crude ascii art: note that a is any single literal character in the language's alphabet, and E1 and E2 are any regular expression. Epsilon(ε) is a state with inputs and outputs, but ignores the stream of characters, and doesn't consume any input either.
a ::= > a ->
E1 E2 ::= >- E1 ->- E2 ->
/---->
E1* ::= > --ε <-\
\ /
E1
/-E1 ->
E1|E2 ::= > ε
\-E2 ->
And that's it! Common uses such as E+, E?, [abc] are equivalent to EE*, (E|), (a|b|c) respectively. Also note that we add for each production rule a very small number of new states. In fact each rule adds zero or one state (in this presentation). characters, quantifiers and dysjunction all add just one state, and the concatenation doesn't add any. Everything else is done by updating the fragments' end pointers to start pointers of other states or fragments.
The epsilon transition states are important, because they are ambiguous. When encountered, is the machine supposed to change state to once following state or another? should it change state at all or stay put? That's the reason why these automatons are called nondeterministic. The solution is to have the automaton transition to the right state, whichever allows it to match the best. Thus the tricky part is to figure out how to do that.
There are fundamentally two ways of doing this. The first way is to try each one. Follow the first choice, and if that doesn't work, try the next. This is recursive backtracking, appears in a few (and notable) implementations. For well crafted regular expressions, this implementation does very little extra work. If the expression is a bit more convoluted, recursive backtracking is very, very bad, O(2^n).
The other way of doing this is to instead try both options in parallel. At each epsilon transition, add to the set of current states both of the states the epsilon transition suggests. Since you are using a set, you can have the same state come up more than once, but you only need to track it once, either you are in that state or not. If you get to the point that there's no option for a particular state to follow, just ignore it, that path didn't match. If there are no more states, then the entire expression didn't match. as soon as any state reaches the final state, you are done.
Just from that explanation, the amount of work we have to do has gone up a little bit. We've gone from having to keep track of a single state to several. At each iteration, we may have to update on the order of m state pointers, including things like checking for duplicates. Also the amount of storage we needed has gone up, since now it's no longer a single pointer to one possible state in the NFA, but a whole set of them.
However, this isn't anywhere close to as bad as it sounds. First off, the number of states is bounded by the number of productions in the original regular expression. From now on we'll call this value m to distinguish it from the number of symbols in the input, which will be n. If two state pointers end up transitioning to the same new state, you can discard one of them, because no matter what else happens, they will both follow the same path from there on out. This means the number of state pointers you need is bounded by the number of states, so that to is m.
This is a bigger win in the worst case scenario when compared to backtracking. After each character is consumed from the input, you will create, rename, or destroy at most m state pointers. There is no way to craft a regular expression which will cause you to execute more than that many instructions (times some constant factor depending on your exact implementation), or will cause you to allocate more space on the stack or heap.
This NFA, simultaneously in some subset of its m states, may be considered some other state machine who's state represents the set of states the NFA it models could be in. each state of that FSM represents one element from the power set of the states of the NFA. This is exactly the DFA implementation used for matching regular expressions.
Using this alternate representation has an advantage that instead of updating m state pointers, you only have to update one. It also has a downside, since it models the powerset of m states, it actually has up to 2m states. That is an upper limit, because you don't model states that cannot happen, for instance the expression a|b has two possible states after reading the first character, either the one for having seen an a, or the one for having seen a b. No matter what input you give it, it cannot be in both of those states at the same time, so that state-set does not appear in the DFA. In fact, because you are eliminating the redundancy of epsilon transitions, many simple DFA's actually get SMALLER than the NFA they represent, but there is simply no way to guarantee that.
To keep the explosion of states from growing too large, a solution used in a few versions of that algorithm is to only generate the DFA states you actually need, and if you get too many, discard ones you haven't used recently. You can always generate them again.
From Theory to Practice
Many practical uses of regular expressions involve tracking the position of the input. This is technically cheating, since the input could be arbitrarily long. Even if you used a 64 bit pointer, the input could possibly be 264+1 symbols long, and you would fail. Your position pointers have to grow with the length of the input, and now your algorithm now requires more than constant space to execute. In practice this isn't relevant, because if your regular expression did end up working its way through that much input, you probably won't notice that it would fail because you'd terminate it long before then.
Of course, we want to do more than just accept or reject inputs as a whole. The most useful variation on this is to extract submatches, to discover which portion of an input was matched by a certain section of the original expression. The simple way to achieve this is to add an epsilon transition for each of the opening and closing braces in the expression. When the FSM simulator encounters one of these states, it annotates the state pointer with information about where in the input it was at the time it encountered that particular transition. If the same pointer returns to that transition a second time, the old annotation is discarded and replaced with a new annotation for the new input position. If two states pointers with disagreeing annotations collapse to the same state, the annotation of a later input position wins again.
If you are sticking to Thompson NFA or DFA implementations, then there's not really any notion of greedy or non-greedy matching. A backtracking algorithm needs to be given a hint about whether it should start by trying to match as much as it can and recursively trying less, or trying as little as it can and recursively trying more, when it fails it first attempt. The Thompson NFA method tries all possible quantities simultaneously. On the other hand, you might still wish to use some greedy/nongreedy hinting. This information would be used to determine if newer or older submatch annotations should be preferred, in order to capture just the right portion of the input.
Another kind of practical enhancement is assertions, productions which do not consume input, but match or reject based on some aspect of the input position. For instance in perl regex, a \b indicates that the input must contain a word boundary at that position, such that the symbol just matched must be a word character, but the next character must not be, or visa versa. Again, we manage this by adding an epsilon transition with special instructions to the simulator. If the assertion passes, then the state pointer continues, otherwise it is discarded.
Lookahead and lookbehind assertions can be achieved with a bit more work. A typical lookbehind assertion r0(?<=r1)r2 is transformed into two separate expressions, .*r1 and r0εr2. Both expressions are applied to the input. Note that we added a .* to the assertion expression, because we don't actually care where it starts. When the simulator encounters the epsilon in the second generated fragment, it checks up on the state of the first fragment. If that fragment is in a state where it could accept right there, the assertion passes with the state pointer flowing into r2, but otherwise, it fails, and both fragments continue, with the second discarding the state pointer at the epsilon transition.
Lookahead also works by using an extra regex fragment for the assertion, but is a little more complex, because when we reach the point in the input where the assertion must succeed, none of the corresponding characters have been encountered (in the lookbehind case, they have all been encountered). Instead, when the simulator reaches the assertion, it starts a pointer in the start state of the assertion subexpression and annotates the state pointer in the main part of the simulation so that it knows it is dependent on the subexpression pointer. At each step, the simulation must check to see that the state pointer it depends upon is still matching. If it doesn't find one, then it fails wherever it happens to be. You don't have to keep any more copies of the assertion subexpressions state pointers than you do for the main part, if two state pointers in the assertion land on the same state, then the state pointers each of them depend upon will share the same fate, and can be reannotated to point to the single pointer you keep.
While were adding special instructions to epsilon transitions, it's not a terrible idea to suggest an instruction to make the simulator pause once in a while to let the user see what's going on. Whenever the simulator encounters such a transition, it will wrap up its current state in some kind of package that can be returned to the caller, inspected or altered, and then resumed where it left off. This could be used to match input interactively, so if the user types only a partial match, the simulator can ask for more input, but if the user types something invalid, the simulator is empty, and can complain to the user. Another possibility is to yield every time a subexpression is matched, allowing you to peek at every sub match in the input. This couldn't be used to exclude some submatches, though. For instance, if you tried to match ((a)*b) against aaa, you could see three submatches for the a's, even though the whole expression ultimately fails because there is no b, and no submatch for the corresponding b's
Finally, there might be a way to modify this to work with backreferences. Even if it's elegent, it's sure to be inefficient, specifically, regular expressions plus backreferences are in NP-Complete, so I won't even try to think of a way to do this, because we are only interested (here) in (asymptotically) efficient possibilities.
I have a container of regular expressions. I'd like to analyze them to determine if it's possible to generate a string that matches more than 1 of them. Short of writing my own regex engine with this use case in mind, is there an easy way in C++ or Python to solve this problem?
There's no easy way.
As long as your regular expressions use only standard features (Perl lets you embed arbitrary code in matching, I think), you can produce from each one a nondeterministic finite-state automaton (NFA) that compactly encodes all the strings that the RE matches.
Given any pair of NFA, it's decidable whether their intersection is empty. If the intersection isn't empty, then some string matches both REs in the pair (and conversely).
The standard decidability proof is to determinize them into DFAs first, and then construct a new DFA whose states are pairs of the two DFAs' states, and whose final states are exactly those in which both states in the pair are final in their original DFA. Alternatively, if you've already shown how to compute the complement of a NFA, then you can (DeMorgan's law style) get the intersection by complement(union(complement(A),complement(B))).
Unfortunately, NFA->DFA involves a potentially exponential size explosion (because states in the DFA are subsets of states in the NFA). From Wikipedia:
Some classes of regular languages can
only be described by deterministic
finite automata whose size grows
exponentially in the size of the
shortest equivalent regular
expressions. The standard example are
here the languages L_k consisting of
all strings over the alphabet {a,b}
whose kth-last letter equals a.
By the way, you should definitely use OpenFST. You can create automata as text files and play around with operations like minimization, intersection, etc. in order to see how efficient they are for your problem. There already exist open source regexp->nfa->dfa compilers (I remember a Perl module); modify one to output OpenFST automata files and play around.
Fortunately, it's possible to avoid the subset-of-states explosion, and intersect two NFA directly using the same construction as for DFA:
if A ->a B (in one NFA, you can go from state A to B outputting the letter 'a')
and X ->a Y (in the other NFA)
then (A,X) ->a (B,Y) in the intersection
(C,Z) is final iff C is final in the one NFA and Z is final in the other.
To start the process off, you start in the pair of start states for the two NFAs e.g. (A,X) - this is the start state of the intersection-NFA. Each time you first visit a state, generate an arc by the above rule for every pair of arcs leaving the two states, and then visit all the (new) states those arcs reach. You'd store the fact that you expanded a state's arcs (e.g. in a hash table) and end up exploring all the states reachable from the start.
If you allow epsilon transitions (that don't output a letter), that's fine:
if A ->epsilon B in the first NFA, then for every state (A,Y) you reach, add the arc (A,Y) ->epsilon (B,Y) and similarly for epsilons in the second-position NFA.
Epsilon transitions are useful (but not necessary) in taking the union of two NFAs when translating a regexp to an NFA; whenever you have alternation regexp1|regexp2|regexp3, you take the union: an NFA whose start state has an epsilon transition to each of the NFAs representing the regexps in the alternation.
Deciding emptiness for an NFA is easy: if you ever reach a final state in doing a depth-first-search from the start state, it's not empty.
This NFA-intersection is similar to finite state transducer composition (a transducer is an NFA that outputs pairs of symbols, that are concatenated pairwise to match both an input and output string, or to transform a given input to an output).
This regex inverter (written using pyparsing) works with a limited subset of re syntax (no * or + allowed, for instance) - you could invert two re's into two sets, and then look for a set intersection.
In theory, the problem you describe is impossible.
In practice, if you have a manageable number of regular expressions that use a limited subset or of regexp syntax, and/or a limited selection of strings that can be used to match against the container of regular expressions, you might be able to solve it.
Assuming you're not trying to solve the abstract general case, there might be something you can do to solve a practical application. Perhaps if you provided a representative sample of the regexps, and described the strings you'd be matching with, a heuristic could be created to solve the problem.