I wonder how I can put a unit of Google AdSense under the article inside the border. That is:
Name Article
.
.
.
end
Category
box adsense
I only found a MediaWiki extension for using AdSense in the sidebar. I am using the Vector skin.
How can I do this?
(Ps. I'm in the early stages of web programming :-) )
It might be possible to modify the existing AdSense extension to inject the ads in a different location; this will probably require changing it to use a different hook, since the one it's using seems to be sidebar-specific.
Alternatively, a crude but effective way is to edit the skins/Vector.php file (or the corresponding file for whichever skin(s) you're using) in your MediaWiki installation and add the AdSense code there, as if you were adding it to an ordinary HTML web page. (Presumably you'd want to put it somewhere near the end of the bodyContent div; look for a line that says <!-- /bodyContent -->.) The disadvantage of this method is that you'll probably have to redo it whenever you upgrade MediaWiki.
Related
Being new to Joomla I do not know all the tricks for troubleshooting etc. Currently I have a page that has a section of content on it. The content is created by DT Register but I've been through the CP several times and cannot find the section?
I hope someone is up and can share with me how to track down where pieces of content come from so I can find where this is being generated and change as needed.
The page in question is a DT Register form. I can locate and modify every section of the page EXCEPT one.
The section is titled USER INFORMATION and captures userid & password to create an account. Looking at the element in developer tools it would appear it is part of the dt register generated code but as I mentioned I can't find it.
The sandbox I am playing in is here: http://take7.lamplighterguild.com/index.php/register?eventId=15&controller=event&task=individualRegister
The section is towards the top and is hard to read on the page...which is why I want to find it.
Thank you for any help or direction.
So unfortunately my question was poorly worded. I have no trouble at all getting the css changed. It is the origin of the content that I am really trying to track down. Where does it come from etc. Is there a way to detect if it came from an article, or a component, etc. I thought there might be clues as how to figure that out.
For troubleshooting issues like this, tools like Firebug or Web Inspector for Chrome and Safari are your go to tools. If you aren't already familiar with them you'll find lots of help online.
There is default body text styling of colour #D9A362 getting into your page from one of the stylesheets. I can't find the source quickly myself, though it's easy enough to write an override.
One place you could do this is open http://take7.lamplighterguild.com/templates/theme1001/css/template.css with a text editor. Below the existing body rule # line 7, add something like
body.cssstyle-style1{
color:black;
}
This will fix the H2 text at the top of the page which you mention, plus the 'user information' line immeadiately above the form.
Hope this helps!
EDIT
You have something which is writing the following style to your page head and this is the culprit:
body {font-family:Arial, Helvetica, sans-serif; font-size:13px; line-height:21px; color:#D9A362; }
It's even on your home page so it's not necesaarily related to DT Register. To me it looks like it's coming from your menu extension.
I am designing a very small website using basic HTML. I usually use a CMS but it has been a while since I did just HTML files, I was wondering if there was some sort templating where you can have like areas like a "Master template" and when a section is changed or added to the rest of the HTML pages that have those sections change with it. Like a common header and footer so I don't have to make the changes in each page if I need to make a change to an element.
I am using AptanaStudio 3 and was wondering if there was a feature like that as there is in Dreamweaver. I don't have Dreamweaver installed on my new computer, so taht is not an option.
Thanks in advance
You can try server-side includes (SSI): http://www.htmlgoodies.com/beyond/webmaster/article.php/3473341/SSI-The-Include-Command.htm
I like the IntelliJ 'live edit' feature but it doesn't work for Django templates because obviously they are just a bunch of variables and its not finding the CSS files. Is there some way of working 'live' on Django templates? (or any other templating system for that matter).
Similarly I tried to use Chrome devtools autosave but it also didn't work, presumably it wants me to open an html file locally (i.e. file://).
And using chrome inspector to edit stuff is a pain because you have to copy and paste your changes - unless I'm missing something?
I am using IntelliJ 12.0.4 Ultimate with the Python plugin (this is more or less equivalent to PyCharm) to work on Django templates. It doesn't look like the Live Edit functionality works as per usual, indeed because the template has to be rendered to HTML first by Django.
One alternative is to assign a keyboard shortcut to the "View | Reload in Browser" menu item.
Another alternative is to use a Chrome plugin such as ChromeReload: You can set this to reload a specific page at a specific interval.
I'm a beginner on Opencart and just started developing a module for Opencart which it must inject some lines of javascript and html code in these pages:
- Cart Page
- Product Page
- Confirmation Order Page
- Register form page
The official documentation doesn't have informations about how can i do that, I've tried to find a good documentation about OpenCart but I didn't find anything.
I need help. How can I do that?
Diggin necro topics;) :
The easiest way i think:
upload/catalog/view/theme/[themename]/template/product/product.tpl - here you can add your custom html for product page
[your theme name, you shouldnt overwrite default theme because it can cause damage after update]
It depends on where you're trying to insert the HTML/JavaScript.
Doing things the proper way in OpenCart, you're limited to the column-left, column-right, content-top, and content-bottom positions.
The files you'll need to create are:
admin/controller/module/mymodule.php
admin/language/english/module/mymodule.php
admin/view/template/module/mymodule.tpl
catalog/controller/module/mymodule.php
catalog/language/module/mymodule.php
catalog/view/theme/default/module/mymodule.php
To learn how to do this the first time, it's easiest to replicate an existing stock OpenCart module (preferably a simple one, such as information). Once you've replicated it you'll need to go through each of those files and replace any references to "information" with "mymodule".
After that, if you've done it properly, you should be able to navigate to Admin > Extensions > Modules and see your module in there. Then install it, use the "Add module" button to position the module on all the relevant layouts, hit save and hey presto you have a working module on the front-end.
To modify the front-end output, just edit catalog/view/theme/default/module/mymodule.php
If you want to insert your HTML somewhere other than the 4 available positions OpenCart gives you, position your module in the content-bottom position and use JavaScript/jQuery to inject some HTML where you want.
If this is for your own personal website then as Pawel S suggested it would be easiest to simply modify the relevant view files (ie. catalog/view/theme/[themename]/template/product/product.tpl), however if you're making a module which you plan to distribute then this should be a last resort.
Hope that helps!
I realize this is probably long dead by now, but if you're creating a module that needs to modify existing controllers, languages, models or views the correct tool to use is vQMod.
vQMod allows you to modify existing code on the fly using XML.
https://code.google.com/p/vqmod/
How can I include a page from magnolia into a magnolia template script?
In the template script with I can access data from a specific page, but how can I load that page into the template?
Let's say I have 2 pages each with its own template. Page 1 contains in its tree page 2. I want to include in the template script of page 1, page 2, but doesn't work.
Thank you very much :)
UPDATED
What I actually want to do is include my header in all of my project's pages. But I don't want to put it as a paragraph, because if I ever want to change my header, I'll have to edit all the project's pages.
So what I try to do and I don't know if this is the correct approach is to create a page template for the header. This template won't include any , or css, it's just the code for the header.
The next thing I want to do is create a page in magnolia with that model to be the header.
Next I'd like to include the page I've just created in my main template model for the project, but I can't figure how to do that.
I am new to Magnolia cms and initially I tried creating my demo site using stk. The only problem was that I couldn't use jsp as a scripting language, or at least I couldn't find any solution on the internet. I don't really know freemarker, but that's not really a big problem. I'm really reluctant in using freemarker because maybe in the future in a more complex project I might need some features that freemarker doesn't support, but jsp does. I'd like to build my site using jsp if that's possible with magnolia.
I'm sorry for this long update, but if anyone has any suggestions on what a best practice could be and if I could implement what I want in jsp I would be really grateful.
Thanks again for you time :)
If you're using the STK then see this guide on content-reuse.
If not have a look at the cms tag-lib, especially the tags cms:loadPage and cms:setNode with which you can get a piece of content and set it as a JSP/JSTL variable and then render it using cms:includeTemplate.
A common scenario is to 'inherit' content from the parent page, the header is an excellent example of this. What you do is for an area you walk up the content hierarchy and render everything from the parent pages in their area with the same name. This way the header which you've only added to the top page is included in all its children.
Another option is to a have special page which simply holds things to be included in other pages. Like header, footer and banners that should go in the side pane of some pages.
Including a page within another page doesn't really work. Page 2 already has its own <html> tags, its own <script> tags, and its own CSS, so including it wholesale into another page just simply doesn't make sense.
You do, however, have a couple of options:
Use an iframe. This will allow you to include the entirety of Page 2 in a region of Page 1.
More recent versions of Magnolia will allow you to render an individual paragraph, which you could then include in another page. (For example, you can see a single paragraph from http://demopublic.magnolia-cms.com/demo-project/about/subsection-articles.html at http://demopublic.magnolia-cms.com/demo-project/about/subsection-articles/article/main/0.html.) This requires knowing a bit about the way the data is structured, but is a pretty useful way to be able to selectively extracts bits of a page.
You can use the Magnolia API in your model class to pull data from sub-pages, and then make it available to your view template. This is the approach the STK uses to build teasers that include content from the pages they reference, and is probably the most powerful and flexible approach, but it does require actually writing some Java code. (See http://documentation.magnolia-cms.com/templating/stk/templating.html and http://documentation.magnolia-cms.com/reference/templating.html for details of how to use this approach.)
(Added after question was edited) The footer functionality that's included with the STK does almost exactly this. You might be interested to take a look at that and see how it's implemented there.
Hope that helps a bit!