I am pretty new to web programming.I am developing a HTML5 based user interface which is supposed to use a middle ware written in C/C++.How can I do this?
I do not want to use any browser specific feature/library to communicate with the middle ware. Can we do the same at the server side and then send back the information to the browser? If so how can I achieve this communication with the middle ware at the server side?
Thanks in advance for the reply.
Note : I am planning to use Tomcat as the server in loop back.
As suggested above, you could use CGI (e.g., perl scripts) as a middle-man between the Tomcat server and your C++ middleware. What I also think might work well, and am planning on using myself in the near future, is to use boost::asio, and take the example HTTP server and modify it to use your middleware. You could then communicate between the Tomcat server and the C++ server using AJAX with JSON.
There is also something called pion server http://www.pion.org/projects/pion-network-library
It allows you to write the entire server in your own C++, with most of the common tasks abstracted away.
The Wt "web toolkit" library (pronounced "witty") may be of interest. Essentially all web-aspects are taken care of this, so absolutely no middleware. Here is an intro, quoting from the website:
The API is widget-centric and uses well-tested patterns of desktop GUI
development tailored to the web. To the developer, it offers
abstraction of web-specific implementation details, including
client-server protocols, event handling, graphics support, graceful
degradation (or progressive enhancement), and URL handling.
Unlike many page-based frameworks, Wt was designed for creating
stateful applications that are at the same time highly interactive
(leveraging techinques such as WebSockets and Ajax to their fullest)
and accessible (supporting plain HTML browsers), using automatic
graceful degradation or progressive enhancement. Things that are
natural and simple with Wt would require an impractical amount of
effort otherwise: switching widgets using animations, while being
perfectly indexed by search robots with clean URLs, or having a
persistent chat widget open throughout, that even works in legacy
browsers like Microsoft Internet Explorer 6.
It can run with its own web server (based on a Boost component) or be linked against standard web server libraries.
I wrote a short blog post about how to integrate it with another C++ component I wrote (RInside, which permits to embed R inside C++ apps) and by joining the two, I had a simple 'webapp' exporting R functionality to the web.
You can further enhance it via Javascript but that is something I have not looked into in any detail.
Related
I have a question related to HTML5 as a desktop application replacement.
At present time my company developed a WinCE application in C++ language with a GUI in C++, that receives and sends messages to the Business Logic layer via sockets (C++ Windows App).
We would like to port this SW on Linux but to realize a cross compilable SW.
The whole application run on a single embedded PC (both BL and GUI) .
About presentation layer we was investigating the HTML5 possible solution, however I have some doubts.
In fact I read that some browsers supports the feature of web sockets, but it seems that this kind of sockets aren't generic TCP/UDP sockets, but are further specialized and their implementation is provided in server side classes, like Socket.IO (Java e node.js) and Jetty (Java).
So is there someone that can provide me some feedback about how/if it is possible to use HTML5 as presentation layer and send/receive updates from/to GUI via sockets to a application running on the same host machine as the web page?
I hope this question fulfill the requirements of the stackexchange "style" and rules, I made my best to be as clear as possible.
Best regards.
Giovanni Parodi
Nothing stops you from having your frontend and backend on same host talking via WebSocket over loopback.
I assume you are unwilling to port your backend to a different language, so you will need a C++ WebSocket implementation. I haven't followed what Microsoft provides in this area, but when using Boost/ASIO, I'd recommend to look at WebSocket++.
Further, WebSocket is still relatively low-level (send message bidirectionally). So you might want something higher-level. You might want to look at WAMP (The WebSocket Application Messaging Protocol), which provides you with RPC and PubSub messaging patterns. Using this, you can plug/exchange your frontend (e.g. have a native Android) talking to same, unchanged backend - same for backend. Decoupling.
There are clients and router(read: server) implementations for various languages.
Btw: WebSocket is supported by Chrome, Firefox and IE (beginning with version 10) -- and other browsers.
I'd need to know more about the specific side-conditions and requirements to give more hints ..
Disclosure: I am original author of Autobahn, WAMP and work for Tavendo.
Is it possible to communicate from a web browser(Loaded an HTM page from server) to an application running in the same server using AJAX. Need to send the request from browser using a button click and update the page with responses received from one another application running in the same server machine?
I am using HTML pages to create website and not using any PHP or ASP like server side scripting. In server machine data are manipulated using a C++ application.
I think you can use any sort of Javascript functions to do that. But you might need to use jQuery or similar frameworks to make your live easier. You might need to search for "Comet Programming" to know exactly how to do 2-way communication between client and server
Updated:
Well, this kind of stuff requires you to read a lot (if you have not already known). Basically, what you need is a server that can do long-polling (or eventsource, websockets). There are many open-source ones that might help you to get started. I can list a several good ones here. There are a lot more
http://www.ape-project.org/
http://cometd.org/
http://socket.io/
http://code.google.com/p/erlycomet/
http://faye.jcoglan.com/
So after you have the comet server up and running you will need to setup the client side (probably Javascript). For those listed projects, most of them come with the client side code to interact with the server (Except for erlycomet). Therefore, you can just use the examples provided and run a quick prototype. If you want to use your raspberry pi, you can use nodejs which provide a lot of ease for dealing with real-time communication (socket.io, faye). And lately, http://www.meteor.com/
I would think of the problem this way: you want to provide a web front end to an existing c++ application. To achieve this you need to think about how your web server communicates with your c++ application. Communication between the browser and web server can be thought of as a separate problem - as you say AJAX calls can be used, or maybe have a look at websockets.
Once you have your request in the web server you need to communicate it to the C++ application (and/or visa versa). This can be done a number of ways, e.g. sockets or RPC. I found this question here which has some good advice.
I am looking for the best way to add support for a REST based Web Service to an MFC C++ Application. This is legacy code that has been around a long time.
I need to have the Application provide the Web Service. I've researched this, and the articles are about consuming Web Services in a C++ App. I envision having to monitor a port and respond to the HTTP requests. It would probably make more sense to tie in with WCF and IIS, but I am not sure how to move forward.
I already have a tool of "making" this App into a Windows Service. I realize it would be better to have a "real" app, and this is what I have to work with. There is so much logic in this code and we are limited in development time, so we are taking the fastest approach possible. We also cannot use DCOM, as the Web Service will be called by a Linux based system.
Any suggested articles would be much appreciated.
For C++ you can test two libraries WSF/C and gSoap, another alternative is to develop it with C# and WCF , and communicate between C# and C++ using C++\CLI.
I use the Poco Net c++ library for this as it supports both HTTP client and server functionality. I considered various other libraries including Boost based stuff, but other than Poco I struggled to find everything I needed in one tidy package. It also has some easy to use mutex support which became essential for me as soon as I added a web server front-end to what had previously been a simple single threaded console app. Poco is cross platform but I mainly use it windows and it has served me well to date. I'm not very clued up on MFC so I don't know how it would get on in that department though.
for one of my applications I'd like to provide a minimal web interface. This core application is written in C++ and uses Qt4 as a framework. Since I'm also using some libraries I wrote to calculate some things and do some complex data management, I'd like to use this existing code as a backend to the web interface.
Idea 1: Using an embedded web server
The first thing I tried (and which worked to some degree) was using an embedded web server (mongoose). As you can imagine, it is just a very thin library and you have to implement a lot of things yourself (like session management, cookies, etc.).
Idea 2: Using a normal web server and adding a fcgi/cgi/scgi backend to my application
The next thing that came to my head was using a mature but compact web server (for instance, lighttpd) and simple provide a fcgi/scgi/cgi backend to it. I could write the web application using a good framework, like Pylons, PHP, or RoR, (...) and simply have an URL prefix, like /a/... which allows me to directly talk to the backend.
I tried to implement the libfcgi into my application, but it looks messier than needed (for instance you'd have to implement your own TCP/IP sockets to pass on data between your app and the web server and tunnel it through the FCGI library, meh)
Idea 3: Creating a command line version of my application which does the most basic things and use a normal web server and framework to do the rest
This is the third idea that came to my head. It is basically about creating a web application using a traditional way (PHP, RoR, etc.) and using a command line version of my application to process data and return it when needed.
I've got some experience with creating web applications, but I never had to do something like this, so I'd like to hear some ideas or suggestions. I'd like to use JavaScript on the browsers (AJAX, that is) and pass some JSON constructs between web browser and server to make the user experience a bit smoother.
So what are your suggestions, ideas on this? I don't want to re-invent the wheel, honestly.
I would never expose a custom written application to the net as front-end, for that servers like apache or lighthttp are build. They give you some serious security out of the box.
As for interaction of your app with that webserver, it depends a bit on the load and what kind of experience you have with writing software in PHP, python or other languages supported by your web server (via interpreter of course).
A slight load, and a command line tool accessed from PHP might do perfectly well.
A more heavy load and you might wish to implement a simple (SOAP?) server with Qt and access that from a python (or php) script.
That way you don't need to do layout in you app, and you also don't need to implement security all that much.
I'm currently researching a similar situation (custom web app backend using Qt), and the least bad option is FastCGI. Found something you might be interested in. Not production ready without some serious testing, but this might be a good starting point for Qt - FastCGI interop: FastCGIQt
I've used the FastCGI Protocol Driver library for a similar project (also a Qt application), the download link is at the end of that page [Libfastcgi]. Integration with the application turned out actually comparatively easy. Lighttpd + mod_fastcgi was used as web server. Can't say anything about FastCGIQt, though.
You Wt works well to provide a web interface to Qt based applications. Both have a similar programming style, and there's an example that demonstrates the integration with Qt.
Here is example of embedded QML-server: https://github.com/ncp1402/ql-server
Our company has a set of 3d modeling softwares written in c++ with qt based gui. We are planning to offer these applications to customers to try them from a web browser. I mean to say, we need to create web interfaces for native c++ codes. Please suggest me which technology, languages should be used. If possible please give some links to some white papers or case studies for this kind of projects. I am totally clue less :)
Ideally you would keep your c++ code on the server and use a mixture of HTML and Javascript on the browser. However since 3d modeling is so client centric you may have to run some c++ code directly in the browser.
There are a few options to look at:
Emscripten
Adobe Alchemy
Google Native Client
A Java Applet using NestedVM
Netscape plugin API
ActiveX
You could also run a few instances of your application on your server inside an XVnc session and let people use it through a VNC viewer applet. The simplest solution however is still to offer a downloadable demo of your application.
Have a look at Wt
Take a look at Native Client.
Soon you might be use WebGL to do 3D in the browser. But how long it will take for browsers to include it I do not know. But it might be good to look at it to not rule out using it in the future.
If creating everything again is too expensive, always you can create a distributed application:
One program running the main application in C++ and generating (for example) XML files.
A web application reading the XML files generated by the C++ application and translating them into the web application language (for example Adobe Flex).
Good luck!