I've spent hours looking up how to fix this problem but nothing has worked. I have eclipse Indigo with CDT and ive downloaded cygwin and packages such as g++, make file, etc. When I try to execute any code I end up with the error Launch failed. Binary not found. I've also set the system path C:\cygwin\bin. How can I set up eclipse so I can use it as my IDE for c++?
Found the problem, I didn't press the hammer button to build the project first. I've only used eclipse for java and I could just hit run and everything would work fine.
Try downloading MinGW, and using those compilers. The Cygwin tools require libraries that Eclipse may not load. The MinGW executables do not require any additional environment like Cygwin does.
Also, in order to use most Cygwin executables, you need to launch the Cygwin environment first.
Related
I tried installing CygWin64, but I cannot find any executables to build my code with in the C:\cygwin64 directory created.
I tried Win-Builds but the setup doesn't load with any mirror I give it. It tries to connect 3 times then aborts.
I tried MinGW-W64-Builds, but I cannot figure out how to install it. I can see a .sh file there, but I believe that is for Linux, so I do not know why because it says it is for Windows
Is there even a way to use 64-bit GCC on Windows? I am trying to tie it to a Code::Blocks IDE as that one only comes with the 32-bit version of MinGW.
Check out out the MinGW-w64 + GCC personal build at http://winlibs.com/.
No installation required, just unzip.
Examples on how to use are on the site, including on how to integrate with Code::Blocks IDE.
I am currently trying to set my eclipse so that I can start c++ development on my Windows computer. However, I am stuck with some errors. But first, here is what I did so far:
Installed the CDT for Eclipse
Installed Cygwin (with the additional packages gcc, gcc and make)
Added all "paths for headers" in Eclipse
The problem is that when I try to run my Hello World program, I get Launch failed. Binary not found.
I already build and rebuild the project but the program is still not running. It must be because of these errors that I have:
/bin/sh: g++: command not found
make: ***[src/HelloWorld.o] Error 127
What can I do to solve these errors?
Try running the Cygwin setup.exe again and select the packages for g++. Search for that and make sure those are installed. It should be under the name gcc-g++. The C++ compiler is installed separately from the C compiler.
Ok, I figured it out by myself. Since this really freaked me out, I want anyone else who has this problem to know how I solved it.
So apparently, since I had g++, gcc and all that installed, it had to be a problem with the path.
So what I did was check my path. If you don't know how to edit it, check this link http://www.computerhope.com/issues/ch000549.htm
So in there, I chose Path under the System variables and clicked on Edit.... What I noticed was that instead of C:\cygwin64 it said C:\cygwin. All I did was append the 64 (since I had installed the 64-bit version of cygwin) and I was done.
I restarted Eclipse, cleaned and built the project and the errors where gone!
I am trying to use Eclipse CDT with Cygwin, but I have problems with the debugger. I have done the following:
- installed Eclipse CDT
- installed Cygwin with gcc, g++ make and gdb
- added c:\cygwin\bin to PATH
- created a new Hello World application in Eclipse
Compiling went well from Eclipse. The first problem was that I had to set the executable manually in the run configuration. Having done this, I running also worked. But when I try to debug, I get the following error:
When I switch to debug perspective, I can see the following:
I tried different debug configurations, but I always get the same result.
First, make sure gdb is located on c:\cygwin\bin. I believe executing which gdb on cygwin might help you do that.
Now, instead of adding this information to PATH and making it available to all your Windows applications, try adding it to your project settings inside Eclipse, like this guy did:
http://www.benjaminarai.com/benjamin_arai/index.php?display=/eclipsecygwingcc.php
I'm trying to get eclipse to work with MinGW.
I've done the following:
Downloaded CDT for eclipse.
Installed MinGW.
Added C:\MinGW\bin to my path.
Opening a command prompt (CMD) and typing g++ or alike works fine.
I run eclipse, create a "New C++ Project", and only get the option saying "other toolchains".
There's a MILLION tutorials out there saying eclipse should identify MinGW on its own. It doesn't, and I don't know what to do. I've tried reinstalling everying in just about every order posible. Still no luck.
I've also noted some tutorials say something about creating a "Managed C++ Project". I've no such option, all I get is "C++ Project" and "C Project"
edit:
I have eclipse ganymede, windows x86_64, version 3.4.2
http://download.eclipse.org/eclipse/downloads/drops/R-3.4.2-200902111700/index.php
Running the "Eclipse IDE for C/C++ developers" fails, since there's no x64 version for windows. The x86 version requires x86 JAVA installed as well, and installing two versions of java, gave nothing but trouble in the past.
The instructions for setting up MinGW in Ganymede are located here.
The following are instructions and
links on how to install the current
version of MinGW. Note that these
links may become inaccurate over time
as new versions of MinGW components
are introduced. Please check the MinGW
File Release section for the latest
versions.
Download and run the MinGW setup program, MinGW-5.1.3.exe.
Select download and install the MinGW base tools and the g++ compiler.
You may select the Current or
Candidate version of these tools. You
may also install any of the other
available compilers as well.
Do not install the MinGW Make feature as the MSYS version of make
from step 5 is a more complete
implementation of make.
The MinGW setup program currently does not install the gdb
debugger. To install the debugger,
download the file from the following
location: gdb-6.6.tar.bz2
Extract the contents of the file gdb-6.6.tar.bz2 to the same location
where you installed MinGW.
If you want to use Makefile projects, download and run the setup
program from the following location:
MSYS-1.0.10.exe. MSYS provides an
implementation of make and related
command line tools. This is not
required for other types of projects
with the MinGW toolchain, which use
CDT's internal build tools to perform
the build.
Following this process resolved any problems I had.
I had the same exact problem with Eclipse Galileo and CDT 6.0.1. It turns out that CDT only recognized MinGW when it's located under c:\mingw. I had it in c:\msys\mingw so that was the problem. After I changed that everything worked fine.
The distinction between managed make projects and makefile project was removed in CDT 4.x, I think. Now there is only one type of project, but you can select different builders. CDT includes an internal builder which does not use makefiles and another one which does.
First, save yourself the effort of "reinstalling in every order possible". That is also known as trial-and-error, and will only make you more frustrated. Apply the normal problem-solving skills you have as a programmer.
Given that you have MinGW installed, what happens if you download "Eclipse IDE for C/C++ developers", start eclipse.exe, and try to create a C++-project with a MinGW toolchain?
EDIT: remember: the key in getting help with problems like these is to produce a minimal example which fails. Also, it would help if you provided URLs to the packages you installed (MinGW, Eclipse, etc.).
EDIT: I just installed CDT using the Ganymede update site, downloaded and installed MinGW from here, and restarted Eclipse, and everything worked fine. I know that doesn't help you, but it does prove that the toolchain detection isn't completely broken. Something is weird on your side.
You could try Wascana Desktop Developer. Its a distribution of Eclipse CDT configured specifically for developing on Windows.
I had the same problem (i.e. Eclipse not finding MinGW on the PATH) after I removed some of the unused files/folders from MinGW. It was ~600 MB and I was tasked to trim it down before adding to source control. I got it down to a workable ~200 MB. When I tried to re-create an Eclipse workspace afterwards, MinGW disappeared from available toolchains. It reappeared after I put the original MinGW install on the path.
HTH
I've been trying to use CDT with Eclipse 3.4 under Windows XP with cygwin.
What do I need to do, in order to get startet?
I used "eclipse-cpp-ganymede-SR1-win32.zip" found on the Eclipse homepage.
Edit:
The main problem is, that I cannot compile and run the code.
In the run configuration, I tried gcc.exe for the C/C++ Application:
After adding the path of make.exe to my $Path, and starting from scratch, it works perfectly.
I finally found. Thanks guys.
After downloading and unpacking "eclipse-cpp-ganymede-SR1-win32.zip", you need to install either Cygwin or MinGW.
Make sure the compiler (e.g. gcc.exe) and make.exe is on your $Path.
Start Eclipse and everything should work fine.
If you want to use Eclipse/CDT on Windows, you should consider using Wascana Desktop Developer, a CDT distro specially targeting Windows hosts.
According the the CDT Downloads page:
As a minimum, you need to install the Eclipse Platform Runtime before installing the CDT
So adding the CDT Ganymede update site to your current eclipse 3.4 configuration should be enough for you to install CDT.
After that, do you have any error message ?
For instance, there can be some eclipse.ini-related issues when using this package.
For me the package you downloaded worked from start. However I was using it with MinGW instead of Cygwin.
I am using it also for QT4 development together with QT Integrator.
I use MinGW, though I note that the documentation says you can use Cygwin. I would have a look through Max Berger's CDT guide to troubleshoot the problem.
you can install both Cygwin and MinGW in your system. gcc and make available with Mingw seems to be suitable better for native windows build. If the PATH environment is set to paths of Cygwin [and/or] MinGW Eclipse project wizard asks you select one . Either Cygwin or MinGW.
For MingW, you may need to download gdb as well, if you need to debug your application