Basically I am exploring IVY, to version my binary artifacts and how to do version control automatically using ivy. I found that publish, pubrevision could help me out.
Hence I am trying to publish my jar through IVY. However I am getting below error and build failed.
impossible to publish artifacts for lib#MyService;working#Localhost java.io.IOException: missing artifact lib#MyService;1.0!MyService.jar
Please find my ivy.xml
<?xml version="1.0" encoding="UTF-8"?>
<ivy-module version="2.0" xmlns:m="http://ant.apache.org/ivy/maven">
<info organisation="lib" module="MyService" />
<configurations defaultconfmapping="default->default;sources->sources;test->default">
<conf name="sources" transitive="false" visibility="private" />
<conf name="test" transitive="false" visibility="private" />
<conf name="default" transitive="false" />
</configurations>
<publications>
<artifact name="MyService" type="jar"/>
</publications>
<dependencies defaultconf="default">
<dependency org="lib" name="commons-logging-1.1" rev="1.1" />
<dependency org="lib" name="commons-collections-3.2" rev="3.2" />
<dependency org="lib" name="commons-beanutils" rev="1.7.0" conf="default" />
</dependencies>
</ivy-module>
Publish task : Note: dist will resolve my dependency and compile and jar
build.xml
<target name="publish" depends="dist">
<ivy:publish resolver="local" pubrevision="1.0" module="MyService" status="release" forcedeliver="true" update="true">
<artifacts pattern="publish/[organisation]-[artifact].[ext]"/>
</ivy:publish>
</target>
MyService.jar is being created in my build folder.
Can you please assist me, what is wrong with my code. I am pretty new to IVY. So any inputs will be appreciated very much.
Thanks.
I am trying to use mapforce to generate an xslt 2.0 file. The mapping is adding 2 dayTimeDuration elements, doing so results in the following error;
No match for core.add(xs:dayTimeDuration, xs:dayTimeDuration). Check argument types.
Supported: +(xs:double, xs:double) -> xs:double
I thought that xslt 2.0 supported adding 2 dayTimeDurations. Is there a way of doing this using mapforce?
Cheers
Stew
Had almost the same problem, first tried to add functx-library but saw it creates absolute path in the generated xslt2-code, which isn't very good.
Well, turns out you can implement that function, but first you have to do some modifications...
Find your Mapforce installation directory, and MapForceLibraries -subdirectory. From that open the "core.mff", and find
<group name="math functions">
<component name="add" growable="true" growablebasename="value">
<sources>
<datapoint name="value1" type="xs:decimal"/>
<datapoint name="value2" type="xs:decimal"/>
</sources>
<targets>
<datapoint name="result" type="xs:decimal"/>
</targets>
As you can seem the "sources" and "targets" elements seems to define the in- and out data types. As it is, they have only implemented "add"-function for "xs:decimal". You can copy/paste this component, then rename it and give new in- out- data types, in your case they are both "xs:dayTimeDuration". Note that there are implementations for each supported language, but you can omit those that are not needed. Here's
what should work:
<component name="addDayTimeDuration" growable="true" growablebasename="value">
<sources>
<datapoint name="value1" type="xs:dayTimeDuration"/>
<datapoint name="value2" type="xs:dayTimeDuration"/>
</sources>
<targets>
<datapoint name="result" type="xs:dayTimeDuration"/>
</targets>
<implementations>
<implementation language="xslt">
<operator value="+"/>
</implementation>
<implementation language="xslt2">
<operator value="+"/>
</implementation>
<implementation language="builtin">
<function name="Core_Add"/>
</implementation>
</implementations>
<description>
<short>result = value1 + value2</short>
<long>Result is the dayTimeDuration value of adding value1 and value2.</long>
</description>
</component>
Your new function should now appear in the "math functions" and should be good to use.
After contacting Altova (the makers of MapForce);
While XPath 2 does offer a subtract-dayTimeDurations operation, this is not presently offered as a function inside MapForce.
I have the following
<RegexMatch Input="$(Configuration)" Expression="^.*?(?=\.)">
<Output ItemName="Theme" TaskParameter="Output" />
</RegexMatch>
My configuration variable is as follows Theme.Environment
So "Default.Debug"
or "Yellow.Release"
I would like to get the first portion in to a varaible called theme.
I have tested this regex and it works in stand alone regex testers
^.*?(?=\.)
but not when used in my build file.
I am echoing the variable out so that i can see the output
<Exec Command="echo $(Theme)"/>
<Exec Command="echo $(Configuration)"/>
Ideas?
If you should use MSBuild Community tasks for that - check this line: <Output PropertyName="Theme" TaskParameter="Output" />
you should use PropertyName="Theme" if you want to refer it like $(Theme) later.
ItemName will create items set, not property.
But it's much simplier to use MSBuild 4.0 inline functions than Msbuild community tasks for that concrete task. Your code will looks like this (adopt for your script):
<?xml version="1.0" encoding="utf-8"?>
<Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003" ToolsVersion="4.0" DefaultTarget="Play">
<PropertyGroup>
<Configuration>Yellow.Release</Configuration>
</PropertyGroup>
<Target Name="Play">
<PropertyGroup>
<Theme>$([System.Text.RegularExpressions.Regex]::Match($(Configuration), `^.*?(?=\.)`))</Theme>
</PropertyGroup>
<Message Text="$(Theme)" />
<Message Text="$(Configuration)" />
</Target>
</Project>
Just realised that RegexMatch doenst return the matched string but rather returns the entire string if matched.
basically it called IsMatch method not Match method
Have re written as a RegexReplace
<RegexReplace Input="$(Configuration)" Expression="\..*" Replacement="" Count="1">
<Output ItemName="Theme" TaskParameter="Output" />
</RegexReplace>
After that it still wasnt working and then i realised i was doing
$(Theme)
Should have been
#(Theme)
I have the following two files:
<?xml version="1.0" encoding="utf-8" ?>
<!-- D E F A U L T H O S P I T A L P O L I C Y -->
<xas DefaultPolicy="open" DefaultSubjectsFile="subjects.xss">
<rule id="R1" access="deny" object="record" subject="roles/*[name()!='Staff']"/>
<rule id="R2" access="deny" object="diagnosis" subject="roles//Nurse"/>
<rule id="R3" access="grant" object="record[#id=$user]" subject="roles/member[#id=$user]"/>
</xas>
and the other xml file called subjects.xss is:
<?xml version="1.0" encoding="utf-8" ?>
<subjects>
<users>
<member id="dupont" password="4A-4E-E9-17-5D-CE-2C-DD-43-43-1D-F1-3F-5D-94-71">
<name>Pierre Dupont</name>
</member>
<member id="durand" password="3A-B6-1B-E8-C0-1F-CD-34-DF-C4-5E-BA-02-3C-04-61">
<name>Jacqueline Durand</name>
</member>
</users>
<roles>
<Staff>
<Doctor>
<member idref="dupont"/>
</Doctor>
<Nurse>
<member idref="durand"/>
</Nurse>
</Staff>
</roles>
</subjects>
I am writing an xsl sheet which will read the subject value for each rule in policy.xas and if the currently logged in user (accessible as variable "user" in the stylesheet) is contained in that subject value (say roles//Nurse), then do something.
I am not being able to test whether the currently logged in user ($user which is equal to say "durand") is contained in roles//Nurse in the subjects file (which is a different xml file). Hope that clarifies my question. Any ideas? Thanks in advance.
I suspect your $user variable holds a member node, correct? In which case the test would be:-
/roles/Nurse[member/idref=$user/#id]
BTW, using tag names to carry data such as "Nurse" and "Doctor" is not a good practice. You are effectively saying that each new role is a new type. Better would be:-
<roles>
<role>
<name>Nurse</name>
<member idref="durand" />
</role>
...
</roles>
Your test would be:-
/roles/role[name='Nurse' and member/idref=$user/#id]
I decided to use log4net as a logger for a new webservice project. Everything is working fine, but I get a lot of messages like the one below, for every log4net tag I am using in my web.config:
Could not find schema information for
the element 'log4net'...
Below are the relevant parts of my web.config:
<configSections>
<section name="log4net"
type="log4net.Config.Log4NetConfigurationSectionHandler, log4net" />
</configSections>
<log4net>
<appender name="RollingFileAppender" type="log4net.Appender.RollingFileAppender">
<file value="C:\log.txt" />
<appendToFile value="true" />
<rollingStyle value="Size" />
<maxSizeRollBackups value="10" />
<maximumFileSize value="100KB" />
<staticLogFileName value="true" />
<layout type="log4net.Layout.PatternLayout">
<conversionPattern value="%date [%thread] %-5level: %message%newline" />
</layout>
</appender>
<logger name="TIMServerLog">
<level value="DEBUG" />
<appender-ref ref="RollingFileAppender" />
</logger>
</log4net>
Solved:
Copy every log4net specific tag to a separate xml-file. Make sure to use .xml as file extension.
Add the following line to AssemblyInfo.cs:
[assembly: log4net.Config.XmlConfigurator(ConfigFile = "xmlFile.xml", Watch = true)]
nemo added:
Just a word of warning to anyone
follow the advice of the answers in
this thread. There is a possible
security risk by having the log4net
configuration in an xml off the root
of the web service, as it will be
accessible to anyone by default. Just
be advised if your configuration
contains sensitive data, you may want
to put it else where.
#wcm: I tried using a separate file. I added the following line to AssemblyInfo.cs
[assembly: log4net.Config.XmlConfigurator(ConfigFile = "log4net.config", Watch = true)]
and put everything dealing with log4net in that file, but I still get the same messages.
You can bind in a schema to the log4net element. There are a few floating around, most do not fully provide for the various options available. I created the following xsd to provide as much verification as possible:
http://csharptest.net/downloads/schema/log4net.xsd
You can bind it into the xml easily by modifying the log4net element:
<log4net
xsi:noNamespaceSchemaLocation="http://csharptest.net/downloads/schema/log4net.xsd"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
I had a different take, and needed the following syntax:
[assembly: log4net.Config.XmlConfigurator(ConfigFile = "log4net.xml", Watch = true)]
which differs from xsl's last post, but made a difference for me. Check out this blog post, it helped me out.
Just a word of warning to anyone follow the advice of the answers in this thread. There is a possible security risk by having the log4net configuration in an xml off the root of the web service, as it will be accessible to anyone by default. Just be advised if your configuration contains sensitive data, you may want to put it else where.
I believe you are seeing the message because Visual Studio doesn't know how to validate the log4net section of the config file. You should be able to fix this by copying the log4net XSD into C:\Program Files\Microsoft Visual Studio 8\XML\Schemas (or wherever your Visual Studio is installed). As an added bonus you should now get intellisense support for log4net
In Roger's answer, where he provided a schema, this worked very well for me except where a commenter mentioned
This XSD is complaining about the use of custom appenders. It only allows for an appender from the default set (defined as an enum) instead of simply making this a string field
I modified the original schema which had a xs:simpletype named log4netAppenderTypes and removed the enumerations. I instead restricted it to a basic .NET typing pattern (I say basic because it just supports typename only, or typename, assembly -- however someone can extend it.
Simply replace the log4netAppenderTypes definition with the following in the XSD:
<xs:simpleType name="log4netAppenderTypes">
<xs:restriction base="xs:string">
<xs:pattern value="[A-Za-z_]\w*(\.[A-Za-z_]\w*)+(\s*,\s*[A-Za-z_]\w*(\.[A-Za-z_]\w*)+)?"/>
</xs:restriction>
</xs:simpleType>
I'm passing this back on to the original author if he wants to include it in his official version. Until then you'd have to download and modify the xsd and reference it in a relative manner, for example:
<log4net
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:noNamespaceSchemaLocation="../../../Dependencies/log4net/log4net.xsd">
<!-- ... -->
</log4net>
Actually you don't need to stick to the .xml extension. You can specify any other extension in the ConfigFileExtension attribute:
[assembly: log4net.Config.XmlConfigurator(ConfigFile = "log4net.config", ConfigFileExtension=".config", Watch = true)]
#steve_mtl: Changing the file extensions from .config to .xml solved the problem. Thank you.
#Wheelie: I couldn't try your suggestion, because I needed a solution which works with an unmodified Visual Studio installation.
To sum it up, here is how to solve the problem:
Copy every log4net specific tag to a separate xml-file. Make sure to use .xml as file extension.
Add the following line to AssemblyInfo.cs:
[assembly: log4net.Config.XmlConfigurator(ConfigFile = "xmlFile.xml", Watch = true)]
For VS2008 just add the log4net.xsd file to your project; VS looks in the project folder as well as the installation directory that Wheelie mentioned.
Also, using a .config extension instead of .xml avoids the security issue since IIS doesn't serve *.config files by default.
Have you tried using a separate log4net.config file?
I got a test asp project to build by puting the xsd file in the visual studio schemas folder as described above (for me it is C:\Program Files\Microsoft Visual Studio 8\XML\Schemas) and then making my web.config look like this:
<?xml version="1.0"?>
<!--
Note: As an alternative to hand editing this file you can use the
web admin tool to configure settings for your application. Use
the Website->Asp.Net Configuration option in Visual Studio.
A full list of settings and comments can be found in
machine.config.comments usually located in
\Windows\Microsoft.Net\Framework\v2.x\Config
-->
<configuration>
<configSections>
<section name="log4net"
type="log4net.Config.Log4NetConfigurationSectionHandler, log4net"/>
</configSections>
<appSettings>
</appSettings>
<connectionStrings>
</connectionStrings>
<system.web>
<trace enabled="true" pageOutput="true" />
<!--
Set compilation debug="true" to insert debugging
symbols into the compiled page. Because this
affects performance, set this value to true only
during development.
-->
<compilation debug="true" />
<!--
The <authentication> section enables configuration
of the security authentication mode used by
ASP.NET to identify an incoming user.
-->
<authentication mode="Windows" />
<customErrors mode="Off"/>
<!--
<customErrors mode="Off"/>
The <customErrors> section enables configuration
of what to do if/when an unhandled error occurs
during the execution of a request. Specifically,
it enables developers to configure html error pages
to be displayed in place of a error stack trace.
<customErrors mode="On" defaultRedirect="GenericErrorPage.htm">
<error statusCode="403" redirect="NoAccess.htm" />
<error statusCode="404" redirect="FileNotFound.htm" />
</customErrors>
-->
</system.web>
<log4net xsi:noNamespaceSchemaLocation="http://csharptest.net/downloads/schema/log4net.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<appender name="LogFileAppender" type="log4net.Appender.FileAppender">
<!-- Please make shure the ..\\Logs directory exists! -->
<param name="File" value="Logs\\Log4Net.log"/>
<!--<param name="AppendToFile" value="true"/>-->
<layout type="log4net.Layout.PatternLayout">
<param name="ConversionPattern" value="%d [%t] %-5p %c %m%n"/>
</layout>
</appender>
<appender name="SmtpAppender" type="log4net.Appender.SmtpAppender">
<to value="" />
<from value="" />
<subject value="" />
<smtpHost value="" />
<bufferSize value="512" />
<lossy value="true" />
<evaluator type="log4net.Core.LevelEvaluator">
<threshold value="WARN"/>
</evaluator>
<layout type="log4net.Layout.PatternLayout">
<conversionPattern value="%newline%date [%thread] %-5level %logger [%property] - %message%newline%newline%newline" />
</layout>
</appender>
<logger name="File">
<level value="ALL" />
<appender-ref ref="LogFileAppender" />
</logger>
<logger name="EmailLog">
<level value="ALL" />
<appender-ref ref="SmtpAppender" />
</logger>
</log4net>
</configuration>
Without modifying your Visual Studio installation, and to take into account proper versioning/etc. amongst the rest of your team, add the .xsd file to your solution (as a 'Solution Item'), or if you only want it for a particular project, just embed it there.
I noticed it a bit late, but if you look into the examples log4net furnishes you can see them put all of the configuration data into an app.config, with one difference, the registration of configsection:
<!-- Register a section handler for the log4net section -->
<configSections>
<section name="log4net" type="System.Configuration.IgnoreSectionHandler" />
</configSections>
Could the definition it as type "System.Configuration.IgnoreSectionHandler" be the reason Visual Studio does not show any warning/error messages on the log4net stuff?
I followed Kit's answer https://stackoverflow.com/a/11780781/6139051 and it didn't worked for AppenderType values like "log4net.Appender.TraceAppender, log4net". The log4net.dll assembly has the AssemblyTitle of "log4net", i.e. the assembly name does not have a dot inside, that was why the regex in Kit's answer didn't work. I has to add the question mark after the third parenthetical group in the regexp, and after that it worked flawlessly.
The modified regex looks like the following:
<xs:pattern value="[A-Za-z_]\w*(\.[A-Za-z_]\w*)+(\s*,\s*[A-Za-z_]\w*(\.[A-Za-z_]\w*)?+)?"/>