The OpenGL SuperBible discusses texture buffer objects, which are textures formed from data inside VBOs. It looks like there are benefits to using them, but all the examples I've found create regular textures. Does anyone have any advice regarding when to use one over the other?
According to the extension registry, texture buffers are only 1-dimensional, cannot do any filtering and have to be accessed by accessing explicit texels (by index), instead of normalized [0,1] floating point texture coordinates. So they are not really a substitution for regular textures, but for large uniform arrays (for example skinning matrices or per instance data). It would make much more sense to compare them to uniform buffers than to regular textures, like done here.
EDIT: If you want to use VBO data for regular, filtered, 2D textures, you won't get around a data copy (best done by means of PBOs). But when you just want plain array access to VBO data and attributes won't suffice for this, then a texture buffer should be the method of choice.
EDIT: After checking the corresponding chapter in the SuperBible, I found that they on the one hand mention, that texture buffers are always 1-dimensional and accessed by discrete integer texel offsets, but on the other hand fail to mention explicitly the lack of filtering. It seems to me they more or less advertise them as textures just sourcing their data from buffers, which explains the OP's question. But as mentioned above this is just the wrong comparison. Texture buffers just provide a way for directly accessing buffer data in shaders in the form of a plain array (though with an adjustable element type), not more (making them useless for regular texturing) but also not less (they are still a great feature).
Buffer textures are unique type of texture that allow a buffer object to be accessed from a shader like a texture. They are completely unique from normal OpenGL textures, including Texture1D, Texture2D, and Texture3D. There are two main reasons why you would use a Buffer Texture instead of a normal texture:
Since Texture Buffers are read like textures, you can read their contents from every vertex freely using texelFetch. This is something that you cannot do with vertex attributes, as those are only accessable on a per-vertex basis.
Buffer Textures can be useful as an alternative to uniforms when you need to pass in large arrays of data. Uniforms are limited in the size, while Buffer Textures can be massive in size.
Buffer Textures are supported in older versions of OpenGL than Shader Storage Buffer Objects (SSBO), making them good for use as a fallback if SSBOs are not supported on a GPU.
Meanwhile, regular textures in OpenGL work differently and are designed for actual texturing. These have the following features not shared by Texture Buffers:
Regular textures can have filters applied to them, so that when you sample pixels from them in your shaders, your GPU will automatically interpolate colors based on nearby pixels. This prevents pixelation when textures are upscaled heavily, though they will get progressively more blurry.
Regular textures can use mipmaps, which are lower quality versions of the same texture used at further view distances. OpenGL has built in functionality to generate mipmaps, or you can supply your own. Mipmaps can be helpful for performance in large 3d scenes. Mipmaps also can help prevent flickering in textures that are rendered further away.
In summary of these points, you could say that normal textures are good for actual texturing, while Buffer Textures are good as a method for passing in raw arrays of values.
Regular textures are used when VBOs are not supported.
Related
Suppose I want to render many different models, each with a different transformation matrix I want to be applied to their vertices. As far as I understand, the naive approach is to specify a matrix uniform in the vertex shader, the value of which is updated for each mesh during rendering.
It's obvious to me that this is a bad idea, due to the expense of many uniform updates and draw calls. So, what is the most efficient way to achieve this in modern OpenGL?
I've genuinely tried to find a straight, clear answer to this question. Most answers I find vaguely mention UBOs, or instance drawing (which afaik won't work unless you are drawing instances of the same mesh many times, which is not my goal).
With OpenGL 4.6 or with ARB_shader_draw_parameters, each draw in a multi-draw rendering command (functions of the form glMultiDraw*) is assigned a draw index from 0 to the number of draw calls specified by that function. This index is provided to the Vertex Shader via the gl_DrawID input value. You can then use this index to fetch a matrix from any number of constructs: UBOs, SSBOs, buffer textures, etc.
This works for multi-draw indirect rendering as well. So in theory, you can have a compute shader operation generate a bunch of rendering commands, then render your entire scene with a single draw call (assuming that all of your objects live in the same vertex buffers and can use the same shader and other state). Or at the very least, a large portion of the scene.
Furthermore, this index is considered dynamically uniform, so you can also use it (or values derived from it and other dynamically uniform values) to index into arrays of textures, fetch a texture from an array of bindless textures, or the like.
I have some vertex data. Positions, normals, texture coordinates. I probably loaded it from a .obj file or some other format. Maybe I'm drawing a cube. But each piece of vertex data has its own index. Can I render this mesh data using OpenGL/Direct3D?
In the most general sense, no. OpenGL and Direct3D only allow one index per vertex; the index fetches from each stream of vertex data. Therefore, every unique combination of components must have its own separate index.
So if you have a cube, where each face has its own normal, you will need to replicate the position and normal data a lot. You will need 24 positions and 24 normals, even though the cube will only have 8 unique positions and 6 unique normals.
Your best bet is to simply accept that your data will be larger. A great many model formats will use multiple indices; you will need to fixup this vertex data before you can render with it. Many mesh loading tools, such as Open Asset Importer, will perform this fixup for you.
It should also be noted that most meshes are not cubes. Most meshes are smooth across the vast majority of vertices, only occasionally having different normals/texture coordinates/etc. So while this often comes up for simple geometric shapes, real models rarely have substantial amounts of vertex duplication.
GL 3.x and D3D10
For D3D10/OpenGL 3.x-class hardware, it is possible to avoid performing fixup and use multiple indexed attributes directly. However, be advised that this will likely decrease rendering performance.
The following discussion will use the OpenGL terminology, but Direct3D v10 and above has equivalent functionality.
The idea is to manually access the different vertex attributes from the vertex shader. Instead of sending the vertex attributes directly, the attributes that are passed are actually the indices for that particular vertex. The vertex shader then uses the indices to access the actual attribute through one or more buffer textures.
Attributes can be stored in multiple buffer textures or all within one. If the latter is used, then the shader will need an offset to add to each index in order to find the corresponding attribute's start index in the buffer.
Regular vertex attributes can be compressed in many ways. Buffer textures have fewer means of compression, allowing only a relatively limited number of vertex formats (via the image formats they support).
Please note again that any of these techniques may decrease overall vertex processing performance. Therefore, it should only be used in the most memory-limited of circumstances, after all other options for compression or optimization have been exhausted.
OpenGL ES 3.0 provides buffer textures as well. Higher OpenGL versions allow you to read buffer objects more directly via SSBOs rather than buffer textures, which might have better performance characteristics.
I found a way that allows you to reduce this sort of repetition that runs a bit contrary to some of the statements made in the other answer (but doesn't specifically fit the question asked here). It does however address my question which was thought to be a repeat of this question.
I just learned about Interpolation qualifiers. Specifically "flat". It's my understanding that putting the flat qualifier on your vertex shader output causes only the provoking vertex to pass it's values to the fragment shader.
This means for the situation described in this quote:
So if you have a cube, where each face has its own normal, you will need to replicate the position and normal data a lot. You will need 24 positions and 24 normals, even though the cube will only have 8 unique positions and 6 unique normals.
You can have 8 vertexes, 6 of which contain the unique normals and 2 of normal values are disregarded, so long as you carefully order your primitives indices such that the "provoking vertex" contains the normal data you want to apply to the entire face.
EDIT: My understanding of how it works:
I have some vertex data. Positions, normals, texture coordinates. I probably loaded it from a .obj file or some other format. Maybe I'm drawing a cube. But each piece of vertex data has its own index. Can I render this mesh data using OpenGL/Direct3D?
In the most general sense, no. OpenGL and Direct3D only allow one index per vertex; the index fetches from each stream of vertex data. Therefore, every unique combination of components must have its own separate index.
So if you have a cube, where each face has its own normal, you will need to replicate the position and normal data a lot. You will need 24 positions and 24 normals, even though the cube will only have 8 unique positions and 6 unique normals.
Your best bet is to simply accept that your data will be larger. A great many model formats will use multiple indices; you will need to fixup this vertex data before you can render with it. Many mesh loading tools, such as Open Asset Importer, will perform this fixup for you.
It should also be noted that most meshes are not cubes. Most meshes are smooth across the vast majority of vertices, only occasionally having different normals/texture coordinates/etc. So while this often comes up for simple geometric shapes, real models rarely have substantial amounts of vertex duplication.
GL 3.x and D3D10
For D3D10/OpenGL 3.x-class hardware, it is possible to avoid performing fixup and use multiple indexed attributes directly. However, be advised that this will likely decrease rendering performance.
The following discussion will use the OpenGL terminology, but Direct3D v10 and above has equivalent functionality.
The idea is to manually access the different vertex attributes from the vertex shader. Instead of sending the vertex attributes directly, the attributes that are passed are actually the indices for that particular vertex. The vertex shader then uses the indices to access the actual attribute through one or more buffer textures.
Attributes can be stored in multiple buffer textures or all within one. If the latter is used, then the shader will need an offset to add to each index in order to find the corresponding attribute's start index in the buffer.
Regular vertex attributes can be compressed in many ways. Buffer textures have fewer means of compression, allowing only a relatively limited number of vertex formats (via the image formats they support).
Please note again that any of these techniques may decrease overall vertex processing performance. Therefore, it should only be used in the most memory-limited of circumstances, after all other options for compression or optimization have been exhausted.
OpenGL ES 3.0 provides buffer textures as well. Higher OpenGL versions allow you to read buffer objects more directly via SSBOs rather than buffer textures, which might have better performance characteristics.
I found a way that allows you to reduce this sort of repetition that runs a bit contrary to some of the statements made in the other answer (but doesn't specifically fit the question asked here). It does however address my question which was thought to be a repeat of this question.
I just learned about Interpolation qualifiers. Specifically "flat". It's my understanding that putting the flat qualifier on your vertex shader output causes only the provoking vertex to pass it's values to the fragment shader.
This means for the situation described in this quote:
So if you have a cube, where each face has its own normal, you will need to replicate the position and normal data a lot. You will need 24 positions and 24 normals, even though the cube will only have 8 unique positions and 6 unique normals.
You can have 8 vertexes, 6 of which contain the unique normals and 2 of normal values are disregarded, so long as you carefully order your primitives indices such that the "provoking vertex" contains the normal data you want to apply to the entire face.
EDIT: My understanding of how it works:
I have some vertex data. Positions, normals, texture coordinates. I probably loaded it from a .obj file or some other format. Maybe I'm drawing a cube. But each piece of vertex data has its own index. Can I render this mesh data using OpenGL/Direct3D?
In the most general sense, no. OpenGL and Direct3D only allow one index per vertex; the index fetches from each stream of vertex data. Therefore, every unique combination of components must have its own separate index.
So if you have a cube, where each face has its own normal, you will need to replicate the position and normal data a lot. You will need 24 positions and 24 normals, even though the cube will only have 8 unique positions and 6 unique normals.
Your best bet is to simply accept that your data will be larger. A great many model formats will use multiple indices; you will need to fixup this vertex data before you can render with it. Many mesh loading tools, such as Open Asset Importer, will perform this fixup for you.
It should also be noted that most meshes are not cubes. Most meshes are smooth across the vast majority of vertices, only occasionally having different normals/texture coordinates/etc. So while this often comes up for simple geometric shapes, real models rarely have substantial amounts of vertex duplication.
GL 3.x and D3D10
For D3D10/OpenGL 3.x-class hardware, it is possible to avoid performing fixup and use multiple indexed attributes directly. However, be advised that this will likely decrease rendering performance.
The following discussion will use the OpenGL terminology, but Direct3D v10 and above has equivalent functionality.
The idea is to manually access the different vertex attributes from the vertex shader. Instead of sending the vertex attributes directly, the attributes that are passed are actually the indices for that particular vertex. The vertex shader then uses the indices to access the actual attribute through one or more buffer textures.
Attributes can be stored in multiple buffer textures or all within one. If the latter is used, then the shader will need an offset to add to each index in order to find the corresponding attribute's start index in the buffer.
Regular vertex attributes can be compressed in many ways. Buffer textures have fewer means of compression, allowing only a relatively limited number of vertex formats (via the image formats they support).
Please note again that any of these techniques may decrease overall vertex processing performance. Therefore, it should only be used in the most memory-limited of circumstances, after all other options for compression or optimization have been exhausted.
OpenGL ES 3.0 provides buffer textures as well. Higher OpenGL versions allow you to read buffer objects more directly via SSBOs rather than buffer textures, which might have better performance characteristics.
I found a way that allows you to reduce this sort of repetition that runs a bit contrary to some of the statements made in the other answer (but doesn't specifically fit the question asked here). It does however address my question which was thought to be a repeat of this question.
I just learned about Interpolation qualifiers. Specifically "flat". It's my understanding that putting the flat qualifier on your vertex shader output causes only the provoking vertex to pass it's values to the fragment shader.
This means for the situation described in this quote:
So if you have a cube, where each face has its own normal, you will need to replicate the position and normal data a lot. You will need 24 positions and 24 normals, even though the cube will only have 8 unique positions and 6 unique normals.
You can have 8 vertexes, 6 of which contain the unique normals and 2 of normal values are disregarded, so long as you carefully order your primitives indices such that the "provoking vertex" contains the normal data you want to apply to the entire face.
EDIT: My understanding of how it works:
I have some vertex data. Positions, normals, texture coordinates. I probably loaded it from a .obj file or some other format. Maybe I'm drawing a cube. But each piece of vertex data has its own index. Can I render this mesh data using OpenGL/Direct3D?
In the most general sense, no. OpenGL and Direct3D only allow one index per vertex; the index fetches from each stream of vertex data. Therefore, every unique combination of components must have its own separate index.
So if you have a cube, where each face has its own normal, you will need to replicate the position and normal data a lot. You will need 24 positions and 24 normals, even though the cube will only have 8 unique positions and 6 unique normals.
Your best bet is to simply accept that your data will be larger. A great many model formats will use multiple indices; you will need to fixup this vertex data before you can render with it. Many mesh loading tools, such as Open Asset Importer, will perform this fixup for you.
It should also be noted that most meshes are not cubes. Most meshes are smooth across the vast majority of vertices, only occasionally having different normals/texture coordinates/etc. So while this often comes up for simple geometric shapes, real models rarely have substantial amounts of vertex duplication.
GL 3.x and D3D10
For D3D10/OpenGL 3.x-class hardware, it is possible to avoid performing fixup and use multiple indexed attributes directly. However, be advised that this will likely decrease rendering performance.
The following discussion will use the OpenGL terminology, but Direct3D v10 and above has equivalent functionality.
The idea is to manually access the different vertex attributes from the vertex shader. Instead of sending the vertex attributes directly, the attributes that are passed are actually the indices for that particular vertex. The vertex shader then uses the indices to access the actual attribute through one or more buffer textures.
Attributes can be stored in multiple buffer textures or all within one. If the latter is used, then the shader will need an offset to add to each index in order to find the corresponding attribute's start index in the buffer.
Regular vertex attributes can be compressed in many ways. Buffer textures have fewer means of compression, allowing only a relatively limited number of vertex formats (via the image formats they support).
Please note again that any of these techniques may decrease overall vertex processing performance. Therefore, it should only be used in the most memory-limited of circumstances, after all other options for compression or optimization have been exhausted.
OpenGL ES 3.0 provides buffer textures as well. Higher OpenGL versions allow you to read buffer objects more directly via SSBOs rather than buffer textures, which might have better performance characteristics.
I found a way that allows you to reduce this sort of repetition that runs a bit contrary to some of the statements made in the other answer (but doesn't specifically fit the question asked here). It does however address my question which was thought to be a repeat of this question.
I just learned about Interpolation qualifiers. Specifically "flat". It's my understanding that putting the flat qualifier on your vertex shader output causes only the provoking vertex to pass it's values to the fragment shader.
This means for the situation described in this quote:
So if you have a cube, where each face has its own normal, you will need to replicate the position and normal data a lot. You will need 24 positions and 24 normals, even though the cube will only have 8 unique positions and 6 unique normals.
You can have 8 vertexes, 6 of which contain the unique normals and 2 of normal values are disregarded, so long as you carefully order your primitives indices such that the "provoking vertex" contains the normal data you want to apply to the entire face.
EDIT: My understanding of how it works: