I deployed the web service, I created. But, I having an error when I tested it on the server. Anyone can help me about this issue?
Here's the error:
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.
Source Error:
<authentication mode="Windows"/>
web config
<?xml version="1.0"?>
<configuration>
<configSections>
<sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35">
<sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35">
<section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/>
<sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35">
<section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="Everywhere"/>
<section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/>
<section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/>
<section name="roleService" type="System.Web.Configuration.ScriptingRoleServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/>
</sectionGroup>
</sectionGroup>
</sectionGroup>
</configSections>
<appSettings>
<add key="emailAdd" value="Eumir#healthcaresynergy.com" />
</appSettings>
<connectionStrings/>
<system.web>
<!--
Set compilation debug="true" to insert debugging
symbols into the compiled page. Because this
affects performance, set this value to true only
during development.
-->
<compilation debug="true">
<assemblies>
<add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
<add assembly="System.Data.DataSetExtensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
<add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add assembly="System.Xml.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
</assemblies>
</compilation>
<!--
The <authentication> section enables configuration
of the security authentication mode used by
ASP.NET to identify an incoming user.
-->
<authentication mode="Windows"/>
<!--
The <customErrors> section enables configuration
of what to do if/when an unhandled error occurs
during the execution of a request. Specifically,
it enables developers to configure html error pages
to be displayed in place of a error stack trace.
<customErrors mode="RemoteOnly" defaultRedirect="GenericErrorPage.htm">
<error statusCode="403" redirect="NoAccess.htm" />
<error statusCode="404" redirect="FileNotFound.htm" />
</customErrors>
-->
<pages>
<controls>
<add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add tagPrefix="asp" namespace="System.Web.UI.WebControls" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
</controls>
</pages>
<httpHandlers>
<remove verb="*" path="*.asmx"/>
<add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" validate="false"/>
</httpHandlers>
<httpModules>
<add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
</httpModules>
<webServices>
<protocols>
<add name="HttpGet"/>
<add name ="HttpPost"/>
<add name ="HttpSoap"/>
</protocols>
</webServices>
</system.web>
<system.codedom>
<compilers>
<compiler language="c#;cs;csharp" extension=".cs" warningLevel="4" type="Microsoft.CSharp.CSharpCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
<providerOption name="CompilerVersion" value="v3.5"/>
<providerOption name="WarnAsError" value="false"/>
</compiler>
</compilers>
</system.codedom>
<!--
The system.webServer section is required for running ASP.NET AJAX under Internet
Information Services 7.0. It is not necessary for previous version of IIS.
-->
<system.webServer>
<validation validateIntegratedModeConfiguration="false"/>
<modules>
<remove name="ScriptModule"/>
<add name="ScriptModule" preCondition="managedHandler" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
</modules>
<handlers>
<remove name="WebServiceHandlerFactory-Integrated"/>
<remove name="ScriptHandlerFactory"/>
<remove name="ScriptHandlerFactoryAppServices"/>
<remove name="ScriptResource"/>
<add name="ScriptHandlerFactory" verb="*" path="*.asmx" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add name="ScriptResource" preCondition="integratedMode" verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
</handlers>
</system.webServer>
<runtime>
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<dependentAssembly>
<assemblyIdentity name="System.Web.Extensions" publicKeyToken="31bf3856ad364e35"/>
<bindingRedirect oldVersion="1.0.0.0-1.1.0.0" newVersion="3.5.0.0"/>
</dependentAssembly>
<dependentAssembly>
<assemblyIdentity name="System.Web.Extensions.Design" publicKeyToken="31bf3856ad364e35"/>
<bindingRedirect oldVersion="1.0.0.0-1.1.0.0" newVersion="3.5.0.0"/>
</dependentAssembly>
</assemblyBinding>
</runtime>
</configuration>
Thanks!
have you tried googling it?
there seem to be some good results: this, that, and more..
Related
I need your valuable help, in reading a connection string value using regex -
Idea is to read the pattern using saltstack state file, and replace with VSTS variable.
Could you please help , how can I read the value ?
<?xml version="1.0" encoding="utf-8"?>
<!--
For more information on how to configure your ASP.NET application, please visit
http://go.microsoft.com/fwlink/?LinkId=301880
-->
<configuration>
<configSections>
<!-- For more information on Entity Framework configuration, visit http://go.microsoft.com/fwlink/?LinkID=237468 -->
<section name="entityFramework" type="System.Data.Entity.Internal.ConfigFile.EntityFrameworkSection, EntityFramework, Version=6.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
</configSections>
<connectionStrings>
<add name="DefaultConnection" connectionString="Data Source=(LocalDb)\v11.0;AttachDbFilename=|DataDirectory|\aspnet-WebApplication45-20140804053515.mdf;Initial Catalog=aspnet-WebApplication45-20140804053515;Integrated Security=True"
providerName="System.Data.SqlClient" />
</connectionStrings>
<system.web>
<authentication mode="None" />
<compilation debug="true" targetFramework="4.5.1" />
<httpRuntime targetFramework="4.5.1" />
</system.web>
<system.webServer>
<modules>
<remove name="FormsAuthenticationModule" />
</modules>
</system.webServer>
<runtime>
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<dependentAssembly>
<assemblyIdentity name="System.Web.Helpers" publicKeyToken="31bf3856ad364e35" />
<bindingRedirect oldVersion="1.0.0.0-3.0.0.0" newVersion="3.0.0.0" />
</dependentAssembly>
<dependentAssembly>
<assemblyIdentity name="System.Web.Mvc" publicKeyToken="31bf3856ad364e35" />
<bindingRedirect oldVersion="1.0.0.0-5.1.0.0" newVersion="5.1.0.0" />
</dependentAssembly>
<dependentAssembly>
<assemblyIdentity name="System.Web.Optimization"
</entityFramework>
</configuration>
Below is my salt state file :
Thanks,
I use a Powershell script to replace the values of the connection string in the web.config.
After I "catch" the connection string I run this code:
$dbServer = [regex]::Match($connection, '(?i)data source=([^;]+)').Groups[1].Value
$newConnection = $connection.Replace($dbServer+';', $newSqlServerName+';')
$dbName = [regex]::Match($connection, '(?i)initial catalog=([^;]+)').Groups[1].Value
$newConnection = $newConnection.Replace($dbName+';', $newDbName+';')
So the Regex is:
For Data Source: (?i)data source=([^;]+)
For Initial Catalog: (?i)initial catalog=([^;]+)
For User name: (?i)user id=([^;]+)
For Password: (?i)password=([^;]+)
I´m trying to setup a server capable to handle CORS, but also capable to return the response in json format.
Tried with various config schemes, but no luck.
I need to do my Ajax requests via POST. With my actual config i´m able to do requests via GET, but currently my response always is encapsulated in XML format.
As stated in ResponseFormat.Json returns xml , my requests must be 'application/json' but when I try to do it in this way I'm receiving a preflight message (Response for preflight has invalid HTTP status code 404).
My web.config (allowing CORS via GET) currently is:
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<system.web>
<compilation debug="true" targetFramework="4.5.2">
<assemblies>
<add assembly="CrystalDecisions.Web, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304" />
<add assembly="CrystalDecisions.Shared, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304" />
<!--<add assembly="log4net, Version=1.2.10.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>-->
<add assembly="CrystalDecisions.ReportSource, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304" />
<add assembly="CrystalDecisions.ReportAppServer.Controllers, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304" />
<add assembly="CrystalDecisions.ReportAppServer.DataDefModel, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304" />
<add assembly="CrystalDecisions.CrystalReports.Engine, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304" />
<add assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
</assemblies>
</compilation>
<httpRuntime />
<pages controlRenderingCompatibilityVersion="4.0" />
<httpHandlers>
<add verb="GET" path="CrystalImageHandler.aspx" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
</httpHandlers>
<sessionState timeout="30"></sessionState>
<webServices>
<protocols>
<add name="HttpGet" />
<add name="HttpPost" />
</protocols>
</webServices>
</system.web>
<appSettings>
<add key="CrystalImageCleaner-AutoStart" value="true" />
<add key="CrystalImageCleaner-Sleep" value="60000" />
<add key="CrystalImageCleaner-Age" value="120000" />
</appSettings>
<connectionStrings>
<....>
</connectionStrings>
<system.webServer>
<handlers>
<add name="CrystalImageHandler.aspx_GET" verb="GET" path="CrystalImageHandler.aspx" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" preCondition="integratedMode" />
<remove name="ExtensionlessUrlHandler-Integrated-4.0" /><remove name="OPTIONSVerbHandler" /><remove name="TRACEVerbHandler" /><add name="ExtensionlessUrlHandler-Integrated-4.0" path="*." verb="*" type="System.Web.Handlers.TransferRequestHandler" preCondition="integratedMode,runtimeVersionv4.0" /></handlers>
<validation validateIntegratedModeConfiguration="false" />
<httpProtocol>
<customHeaders>
<add name="Access-Control-Allow-Origin" value="*" />
<add name="Access-Control-Allow-Headers" value="X-Requested-With, Content-Type" />
<add name="Access-Control-Allow-Methods" value="GET, POST, PUT, DELETE, OPTIONS" />
</customHeaders>
</httpProtocol>
</system.webServer>
</configuration>
I´m using iron-polymer for the Ajax-requests and combined various content-types. Currently i´m getting my data via GET using 'content-type="application/x-www-form-urlencoded; charset=UTF-8" handle-as="document"'.
I´m having difficulties to process the response due such XML encapsulation. Below are two examples of received responses. How to extract the contents ?
1:
<?xml version="1.0" encoding="utf-8"?>
<string xmlns="http://my.domain/">EF7B48E346BC537F98F9696304CECAFE</string>
2:
'<?xml version="1.0" encoding="utf-8"?>
<ArrayOfCiudad xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://my.domain/">
<Ciudad>
<Codigo>32</Codigo>
<Nombre>BOGOTA</Nombre>
<CodigoDepartamento>Z03</CodigoDepartamento>
</Ciudad>
<Ciudad>
<Codigo>133</Codigo>
<Nombre>CALI</Nombre>
<CodigoDepartamento>Z01</CodigoDepartamento>
</Ciudad>
<Ciudad>
<Codigo>53</Codigo>
<Nombre>CARTAGENA</Nombre>
<CodigoDepartamento>Z13</CodigoDepartamento>
</Ciudad>
<Ciudad>
<Codigo>30</Codigo>
<Nombre>MEDELLIN</Nombre>
<CodigoDepartamento>Z04</CodigoDepartamento>
</Ciudad>
</ArrayOfCiudad>'
I have the following (but very annoying) problem with this particular type project and Ent Lib 5.0.
The reason I am saying it pertains to the fact that it is a Unit Test project related is that the same code/configuration work fine from a Console Application.
Here is the code:
ICacheManager cm = CacheFactory.GetCacheManager("TestCacheManager");
cm.Add("max", 1);
Here is the config:
<configuration>
<configSections>
<section name="dataConfiguration" type="Microsoft.Practices.EnterpriseLibrary.Data.Configuration.DatabaseSettings, Microsoft.Practices.EnterpriseLibrary.Data, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="true" />
<section name="cachingConfiguration" type="Microsoft.Practices.EnterpriseLibrary.Caching.Configuration.CacheManagerSettings, Microsoft.Practices.EnterpriseLibrary.Caching, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="true" />
</configSections>
<dataConfiguration defaultDatabase="Caching" />
<connectionStrings>
<add name="Caching" connectionString="Data Source=.;Initial Catalog=Caching;Integrated Security=True"
providerName="System.Data.SqlClient" />
</connectionStrings>
<cachingConfiguration defaultCacheManager="TestCacheManager">
<cacheManagers>
<add name="TestCacheManager" type="Microsoft.Practices.EnterpriseLibrary.Caching.CacheManager, Microsoft.Practices.EnterpriseLibrary.Caching, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
expirationPollFrequencyInSeconds="60" maximumElementsInCacheBeforeScavenging="1000"
numberToRemoveWhenScavenging="10" backingStoreName="TestStore" />
</cacheManagers>
<backingStores>
<add name="TestStore" type="Microsoft.Practices.EnterpriseLibrary.Caching.Database.DataBackingStore, Microsoft.Practices.EnterpriseLibrary.Caching.Database, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
encryptionProviderName="" databaseInstanceName="Caching"
partitionName="Name" />
<add type="Microsoft.Practices.EnterpriseLibrary.Caching.BackingStoreImplementations.NullBackingStore, Microsoft.Practices.EnterpriseLibrary.Caching, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
name="NullBackingStore" />
</backingStores>
</cachingConfiguration>
</configuration>
And then finally the exception that I only get in the Unit Test Project:
Activation error occured while trying to get instance of type ICacheManager, key "TestCacheManager"
I have converted ASP.NET application to run ASP.NET and MVC 3 together. And there is some web service (/WS/Inventory.asmx/getInventory) that shows the following exception now:
System.Web.HttpException: Failed to Execute URL.
[HttpException (0x80004005): Failed to Execute URL.]
System.Web.Hosting.ISAPIWorkerRequestInProcForIIS6.BeginExecuteUrl(String url, String method, String childHeaders, Boolean sendHeaders, Boolean addUserIndo, IntPtr token, String name, String authType, Byte[] entity, AsyncCallback cb, Object state) +2428801
System.Web.HttpResponse.BeginExecuteUrlForEntireResponse(String pathOverride, NameValueCollection requestHeaders, AsyncCallback cb, Object state) +417
System.Web.DefaultHttpHandler.BeginProcessRequest(HttpContext context, AsyncCallback callback, Object state) +192
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +8862676
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +184
I running it on Windows 7 with IIS 7 though there is the same exception on Windows 2003.
Here is web config section:
<system.webServer>
<defaultDocument>
<files>
<add value="index.aspx" />
</files>
</defaultDocument>
<httpErrors errorMode="Detailed" />
<modules runAllManagedModulesForAllRequests="true">
<add name="OverloadProtection" type="Winncom.Classes.HttpModules.OverloadProtection,Winncom" preCondition="managedHandler" />
<add name="Rewrite" type="Winncom.Classes.HttpModules.Rewrite,Winncom" preCondition="managedHandler" />
<add name="HttpCompression" type="Winncom.Classes.HttpModules.HttpCompression,Winncom" preCondition="managedHandler" />
</modules>
<handlers>
<remove name="UrlRoutingHandler" />
<add name="PageHandlerFactory-ISAPI-2.0-html" path="*.html" verb="*" modules="IsapiModule" scriptProcessor="C:\Windows\Microsoft.NET\Framework\v4.0.30319\aspnet_isapi.dll" resourceType="Unspecified" requireAccess="None" preCondition="classicMode,runtimeVersionv4.0,bitness32" />
<add name="*.aspx_*" path="*.aspx" verb="*" type="Winncom.Classes.Service.HandlerDispatcher" resourceType="Unspecified" requireAccess="Script" preCondition="integratedMode,runtimeVersionv4.0" />
<add name="*/cjpegimage.aspx_*" path="*/cjpegimage.aspx" verb="*" type="System.Web.UI.PageHandlerFactory" preCondition="integratedMode,runtimeVersionv2.0" />
<add name="*/webpages/*.html_*" path="*/webpages/*.html" verb="*" type="System.Web.UI.PageHandlerFactory" preCondition="integratedMode,runtimeVersionv2.0" />
</handlers>
<validation validateIntegratedModeConfiguration="false" />
</system.webServer>
<runtime>
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<dependentAssembly>
<assemblyIdentity name="System.Web.Mvc" publicKeyToken="31bf3856ad364e35" />
<bindingRedirect oldVersion="1.0.0.0-2.0.0.0" newVersion="3.0.0.0" />
</dependentAssembly>
</assemblyBinding>
</runtime>
Any ideas would be nice. Thanks!
Try adding this to your handlers section in the web.config
<add verb="*" path="*.asmx" type="System.Web.Services.Protocols.WebServiceHandlerFactory, System.Web.Services, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" validate="false"/>
I read that Elmah can tweet error messages so I tried to set it up, but could not get it to work. I am able to get it to save the errors into a database and email me the error, but the tweet doesn't seem to work.
Here is my configuration:
<configSections>
<sectionGroup name="elmah">
<section name="security" requirePermission="false" type="Elmah.SecuritySectionHandler, Elmah"/>
<section name="errorLog" requirePermission="false" type="Elmah.ErrorLogSectionHandler, Elmah" />
<section name="errorMail" requirePermission="false" type="Elmah.ErrorMailSectionHandler, Elmah" />
<section name="errorFilter" requirePermission="false" type="Elmah.ErrorFilterSectionHandler, Elmah"/>
<section name="errorTweet" requirePermission="false" type="Elmah.ErrorTweetSectionHandler, Elmah"/>
</sectionGroup>
</configSections>
<elmah>
<security allowRemoteAccess="1" />
<errorLog type="Elmah.SqlServerCompactErrorLog, Elmah" connectionStringName="LoggingDB" />
<errorTweet
userName="twitter_username"
password="twitter_password" statusFormat="{Message}" />
</elmah>
<system.webServer>
<modules>
<add name="ErrorLog" type="Elmah.ErrorLogModule, Elmah" preCondition="managedHandler" />
<add name="ErrorFilter" type="Elmah.ErrorFilterModule, Elmah" preCondition="managedHandler" />
<add name="ErrorMail" type="Elmah.ErrorMailModule, Elmah" preCondition="managedHandler" />
<add name="ErrorTweet" type="Elmah.ErrorTweetModule, Elmah" preCondition="managedHandler" />
</modules>
<handlers>
<add name="Elmah" path="elmah.axd" verb="POST,GET,HEAD" type="Elmah.ErrorLogPageFactory, Elmah" preCondition="integratedMode" />
</handlers>
</system.webServer>
No errors occur, the tweet just does not appear even though it's logged in the database and emailed.
See the ErrorHowling wiki on the project's site for some background and information on ErrorTweetModule and its use.