I have the following string: s="80". I need to put this in an
unsigned char k[]. The unsigned char should look like this: unsigned char k[]={0x38,0x34}, where 0x38=8 and 0x34=0 These are the hexadecimal values for 8 and 0. How to do this? Need some help!
Please give some code. Thx
I am working on ubuntu c++ code. THX!
I use this for an encryption! I need 0x38 in an unsigned char.PLEASE HELP! Need some code:)
EDIT:
HOW TO OBTAIN THE DEC/CHAR VALUE AND PUT IT IN AN unsigned char k[]?
I've realised that it's ok if in the unsigned char [] i have the dec values {56,52} of the 8 and 0 that i have in the string!
Assuming you want this string converted as ASCII (or UTF-8) it is already in the correct format.
std::string s="80";
std::cout << "0x" << std::hex << static_cast<int>(s[0]) << "\n";
std::cout << "0x" << std::hex << static_cast<int>(s[1]) << "\n";
If you want it in an int array, then just copy it:
int data[2];
std::copy(s.begin(), s.end(), data);
I think that no matter you store '8' or 0x39, they will be present as the same binary numbers by the computer.
I think you do not really understand what you are asking.
The following are synonyms:
std::string s = "\x38\x30";
std::string s = "80";
As the following are synonyms:
char c = '8', s = '0' ;
char c = s[0], s = s[1];
char c = 0x38, s = 0x30;
It is exactly the same (except if your base encoding is not ASCII). This is not an encryption.
std::string s = "80";
unsigned char * pArray = new unsigned char[ s.size() ];
const char * p = s.c_str();
unsigned char * p2 = pArray;
while( *p )
*p2++ = *p++;
delete []pArray;
You can try it. I did not write these codes. I found I like you
#include <algorithm>
#include <sstream>
#include <iostream>
#include <iterator>
#include <iomanip>
namespace {
const std::string test="mahmutefe";
}
int main() {
std::ostringstream result;
result << std::setw(2) << std::setfill('0') << std::hex << std::uppercase;
std::copy(test.begin(), test.end(), std::ostream_iterator<unsigned int>(result, " "));
std::cout << test << ":" << result.str() << std::endl;
system("PAUSE");
}
convert that string to a char array, then subrtact '0' from each char.
Related
Below code takes a hex string(every byte is represented as its corresponidng hex value)
converts it to unsigned char * buffer and then converts back to hex string.
This code is testing the conversion from unsigned char* buffer to hex string
which I need to send over the network to a receiver process.
I chose hex string as unsigned char can be in range of 0 to 255 and there is no printable character after 127.
The below code just tells the portion that bugs me. Its in the comment.
#include <iostream>
#include <sstream>
#include <iomanip>
using namespace std;
// converts a hexstring to corresponding integer. i.e "c0" - > 192
int convertHexStringToInt(const string & hexString)
{
stringstream geek;
int x=0;
geek << std::hex << hexString;
geek >> x;
return x;
}
// converts a complete hexstring to unsigned char * buffer
void convertHexStringToUnsignedCharBuffer(string hexString, unsigned char*
hexBuffer)
{
int i=0;
while(hexString.length())
{
string hexStringPart = hexString.substr(0,2);
hexString = hexString.substr(2);
int hexStringOneByte = convertHexStringToInt (hexStringPart);
hexBuffer[i] = static_cast<unsigned char>((hexStringOneByte & 0xFF)) ;
i++;
}
}
int main()
{
//below hex string is a hex representation of a unsigned char * buffer.
//this is generated by an excryption algorithm in unsigned char* format
//I am converting it to hex string to make it printable for verification pupose.
//and takes the hexstring as inpuit here to test the conversion logic.
string inputHexString = "552027e33844dd7b71676b963c0b8e20";
string outputHexString;
stringstream geek;
unsigned char * hexBuffer = new unsigned char[inputHexString.length()/2];
convertHexStringToUnsignedCharBuffer(inputHexString, hexBuffer);
for (int i=0;i<inputHexString.length()/2;i++)
{
geek <<std::hex << std::setw(2) << std::setfill('0')<<(0xFF&hexBuffer[i]); // this works
//geek <<std::hex << std::setw(2) << std::setfill('0')<<(hexBuffer[i]); -- > this does not work
// I am not able to figure out why I need to do the bit wise and operation with unsigned char "0xFF&hexBuffer[i]"
// without this the conversion does not work for individual bytes having ascii values more than 127.
}
geek >> outputHexString;
cout << "input hex string: " << inputHexString<<endl;
cout << "output hex string: " << outputHexString<<endl;
if(0 == inputHexString.compare(outputHexString))
cout<<"hex encoding successful"<<endl;
else
cout<<"hex encoding failed"<<endl;
if(NULL != hexBuffer)
delete[] hexBuffer;
return 0;
}
// output
// can some one explain ? I am sure its something silly that I am missing.
the C++20 way:
unsigned char* data = new unsigned char[]{ "Hello world\n\t\r\0" };
std::size_t data_size = sizeof("Hello world\n\t\r\0") - 1;
auto sp = std::span(data, data_size );
std::transform( sp.begin(), sp.end(),
std::ostream_iterator<std::string>(std::cout),
[](unsigned char c) -> std::string {
return std::format("{:02X}", int(c));
});
or if you want to store result into string:
std::string result{};
result.reserve(size * 2 + 1);
std::transform( sp.begin(), sp.end(),
std::back_inserter(result),
[](unsigned char c) -> std::string {
return std::format("{:02X}", int(c));
});
Output:
48656C6C6F20776F726C640A090D00
The output of an unsigned char is like the output of a char which obviously does not what the OP expects.
I tested the following on coliru:
#include <iomanip>
#include <iostream>
int main()
{
std::cout << "Output of (unsigned char)0xc0: "
<< std::hex << std::setw(2) << std::setfill('0') << (unsigned char)0xc0 << '\n';
return 0;
}
and got:
Output of (unsigned char)0xc0: 0�
This is caused by the std::ostream::operator<<() which is chosen out of the available operators. I looked on cppreference
operator<<(std::basic_ostream) and
std::basic_ostream::operator<<
and found
template< class Traits >
basic_ostream<char,Traits>& operator<<( basic_ostream<char,Traits>& os,
unsigned char ch );
in the former (with a little bit help from M.M).
The OP suggested a fix: bit-wise And with 0xff which seemed to work. Checking this in coliru.com:
#include <iomanip>
#include <iostream>
int main()
{
std::cout << "Output of (unsigned char)0xc0: "
<< std::hex << std::setw(2) << std::setfill('0') << (0xff & (unsigned char)0xc0) << '\n';
return 0;
}
Output:
Output of (unsigned char)0xc0: c0
Really, this seems to work. Why?
0xff is an int constant (stricly speaking: an integer literal) and has type int. Hence, the bit-wise And promotes (unsigned char)0xc0 to int as well, yields the result of type int, and hence, the std::ostream::operator<< for int is applied.
This is an option to solve this. I can provide another one – just converting the unsigned char to unsigned.
Where the promotion of unsigned char to int introduces a possible sign-bit extension (which is undesired in this case), this doesn't happen when unsigned char is converted to unsigned. The output stream operator for unsigned provides the intended output as well:
#include <iomanip>
#include <iostream>
int main()
{
std::cout << "Output of (unsigned char)0xc0: "
<< std::hex << std::setw(2) << std::setfill('0') << (unsigned)(unsigned char)0xc0 << '\n';
const unsigned char c = 0xc0;
std::cout << "Output of unsigned char c = 0xc0: "
<< std::hex << std::setw(2) << std::setfill('0') << (unsigned)c << '\n';
return 0;
}
Output:
Output of (unsigned char)0xc0: c0
Output of unsigned char c = 0xc0: c0
Live Demo on coliru
I'm loosing my mind at the moment and below is what I'm trying to do.
char* buffer;
sprintf(buffer, "0x%08x", 5);
*(int *)(0x834AF2AC + 0x1a) = ?buffer?;
Buffer = 0x05000000
I need to set that in memory, if I just set 05 it will set 0x00000005
Question asked better.
How can I convert an INT into a format of "0x%08x"
So 5 becomes 0x05000000
ANSWERD:
The correct answer is *(int *)(0x834AF2AC + 0x1a) = 5<<24;
Something like this:
#include <iostream> // for std::cout, std::endl
#include <string> // for std::string, std::stoi
int main()
{
std::string s{"0x05"};
int i = std::stoi(s, nullptr, 16); // convert base 16 number in s to int
std::cout << i << std::endl;
}
Two result from google which points to stackoverflow (result 1 and 2).
Convert char to int in C and C++
C char* to int conversion
I'm not sure if I understand correctly but if you want to convert an entire string to int, then I would suggest stringstream.
http://www.cplusplus.com/reference/sstream/stringstream/stringstream/
For hexadecimal string:
#include <string> // std::string
#include <iostream> // std::cout
#include <sstream> // std::stringstream
int main () {
std::stringstream ss;
ss << std::hex << 0x05;
int foo;
ss >> foo;
std::cout << "foo: " << foo << '\n';
return 0;
}
I have an array of hexadecimals and I need to convert it to string.
my array:
// declaration
unsigned char HEX_bufferMessage[12];
// initialize
HEX_bufferMessage[0] = 0xF0;
HEX_bufferMessage[1] = 0x15;
HEX_bufferMessage[2] = 0x31;
HEX_bufferMessage[3] = 0x02;
HEX_bufferMessage[4] = 0x03;
HEX_bufferMessage[5] = 0x00;
HEX_bufferMessage[6] = 0x00;
HEX_bufferMessage[7] = 0xD1;
HEX_bufferMessage[8] = 0xD1;
HEX_bufferMessage[9] = 0x00;
HEX_bufferMessage[10] = 0x00;
HEX_bufferMessage[11] = 0xF7;
I only have these informations in hexadecimal format, I need to convert them to string. Anyone know how I can do it??
Thank you!!
Late to the party, but since all the answers using std::to_string() fail to output the hex values as hex values, I suggest you send them to a stream, where you can format your output via std::hex:
std::cout << "0x" << std::hex << HEX_bufferMessage[0] << std::endl;
or, if you want to use it in a string:
std::string to_hex_string( const unsigned int i ) {
std::stringstream s;
s << "0x" << std::hex << i;
return s.str();
}
or even in a single line:
// ...
return (static_cast<std::stringstream const&>(std::stringstream() << "0x" << std::hex << i)).str();
std::bitset<16> foo(HEX_bufferMessage[0]);
std::string s = foo.to_string();
http://en.cppreference.com/w/cpp/utility/bitset/to_string
Use : std::to_string
for (size_t i =0 ; i<10; ++i)
{
std::string s { std::to_string(HEX_bufferMessage[i]) }; //ith element
std::cout << s; //concatenate all s as per need
}
something like this?
const char *hex = "0123456789ABCDEF";
unsigned char x = 0xF8;
std::cout << "0x" << hex[x >> 4 & 0xF] << hex[x & 0xF] << std::endl;
How about std::to_string?
Like
std::string s;
for (auto const& v : HEX_bufferMessage)
s += std::to_string(v);
char hex_string[12*2+1]; /* where 12 - is the number of you hex values, 2 - is 2 chars per each hex, and 1 is the final zero character */
for(int i=0;i<12;++i) {
sprintf(hex_string+i*2,"%x", HEX_bufferMessage[i]);
}
I have a struct that stores the integer value as a custom string type.
typedef char OneLine[MAX_LINE + 1];
So I have some instances where I want the string that contains "12" to be converted to
C.
OneLine testString;
strcpy(testString, "12");
I'd like a way for me to convert testString to be "C"
How should I tackle this?
Thanks in advance.
You can use sscanf to convert "12" to an integer 12. Then you can use sprintf with %x format to convert integer 12 to "C"
The conversion can be done using stringstreams
#include <iostream>
#include <sstream>
#include <string>
#include <ios>
int main()
{
char const *str = "12";
std::istringstream iss( str );
int val;
if( !( iss >> val ) ) {
// handle error
}
std::ostringstream oss;
oss << std::hex << val;
std::cout << oss.str() << std::endl;
}
Or slightly less verbose way with C++11
char const *str = "12";
auto val = std::stoi( str );
std::ostringstream oss;
oss << std::hex << val;
std::cout << oss.str() << std::endl;
First, even if you were to do this manually, you shouldn't use char arrays for strings. Use std::[w]string.
Second, you can do this with std::[w][i|o]stringstream:
istringstream iss("12");
int number;
iss >> number;
ostringstream oss;
oss << hex << number;
const string& hexNumber = oss.str();
// hexNumber now contains "C"
I have tried to find this topic on the web but I couldn't find the one I need.
I have a string of character:
char * tempBuf = "qj";
The result I want is 0x716A, and that value is going to be converted into decimal value.
Is there any function in vc++ that can be used for that?
You can use a stringstream to convert each character to a hexadecimal representation.
#include <iostream>
#include <sstream>
#include <cstring>
int main()
{
const char* tempBuf = "qj";
std::stringstream ss;
const char* it = tempBuf;
const char* end = tempBuf + std::strlen(tempBuf);
for (; it != end; ++it)
ss << std::hex << unsigned(*it);
unsigned result;
ss >> result;
std::cout << "Hex value: " << std::hex << result << std::endl;
std::cout << "Decimal value: " << std::dec << result << std::endl;
}
So if I understood correctly the idea...
#include <stdint.h>
uint32_t charToUInt32(const char* src) {
uint32_t ret = 0;
char* dst = (char*)&ret;
for(int i = 0; (i < 4) && (*src); ++i, ++src)
dst[i] = *src;
return ret;
}
If I understand what you want correctly: just loop over the characters, start to finish; at each character, multiply the sum so far by 256, and add the value of the next character; that gives the decimal value in one shot.
What you are looking for is called "hex encoding". There are a lot of libraries out there that can do that (unless what you were looking for was how to implement one yourself).
One example is crypto++.