I'm trying to install PyAudiere (on MacOS 10.5), and it needs Audiere installed. I downloaded the Unix source from the Audiere website and ran configure and the makefile. I also tried adding audiere.h to the g++ include path with the command:
g++ -I /[...]/audiere-1.9.4/src audiere.h.
This did something, but I'm not sure what. When I try to install PyAudiere using
python setup.py install
it always says
error: audiere.h: No such file or directory.
Have I installed Audiere? If not, how do I do it?
Disclaimer: I know virtually nothing about mac OS
If you have run configure:
./configure
and the makefile:
make
Have you then run:
make install
Without running make install you have simply compiled the files but not installed them into your system. Under linux you might have to run sudo make install in order to get the administrative privileges required to install files.
Related
I'm having problems compiling LANShare's sourcecode.
I need to compile this program because i need to use it on a 32-bit unix machine and there's no .deb or appimage release file.
This is LANShare.
As you can see there's no config file and i don't know how i can proceed with compilation.
I compiled from source many times but here there's no Readme nor instructions, then I opened an issue but there's no response yet.
Found a solution, thanks to n. 1.8e9-where's-my-share m.
Theese instructions should be valid for any Debian 10 install.
To install qt tools:
sudo apt install qt5-qmake qt5-default
then to compile:
qmake -o Makefile LANShare.pro
make
within the README.md file there is:
You can download the Ubuntu package or linux AppImage or Windows executable from the release page.
https://github.com/abdularis/LAN-Share/releases
Using .deb (Ubuntu/Debian)
download the latest version, for example lanshare_1.2.1-1_amd64.deb then open a terminal, navigate to directory where the downloaded package is located and type
$ sudo dpkg -i ./lanshare_1.2.1-1_amd64.deb
I'm trying to install Boost for c++. Since I use cygwin (on Windows 7) I follow these instructions for Unix.
I start by downloading boost_1_55_0.zip from sourceforge. The instructions tell me to run tar --bzip2 -xf /path/to/boost_1_55_0.zip but this doesn't work (probably because the downloaded file is .zip and not .tar.bz2; I can't find the latter anywhere to download), so instead I use winrar and unzip it into /usr/local.
After this the header-only libraries work fine, but I need the ones where a build is necessary.
The instructions tells me to go to the boost folder and run./configure --help, but this doesn't work; I get the message -bash: ./configure: No such file or directory. So I locate the file configure in the folder /usr/local/boost_1_55_0/tools/build/v2/engine/boehm_gc, go there and try again, and this time it works: I get the help for configure.
I then try to run ./configure --prefix=/usr/local/boost_1_55_0 --enable-cplusplus but get the error message configure: error: cannot run /bin/sh ./config.sub. I try it with only one or none of the options too but that doesn't help.
Any ideas?
I don't know what guide you're following, but to install boost I have done:
cd boost
./bootstrap.sh
./b2
./b2 install
stop
As report boost doc:
If you plan to build from the Cygwin bash shell, you're actually
running on a POSIX platform and should follow the instructions for
getting started on Unix variants. Other command shells, such as
MinGW's MSYS, are not supported—they may or may not work.
I am trying to install Qt 4.6.2 on ubuntu. When I run the configure script I get the following error message "You don't seem to have 'make' or 'gmake' in your PATH. cannot proceed".
On echo of the PATH variable I get
/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
on running the command
$which make , I get
/usr/bin/make
How do I proceed with this issue? I seem to have the make in the path env variable but still the config script throws cannot find make or gmake?
It not the problem of make or gmake, nor PATH, Just because you unzip the tarball without -a option. so, to solve this problem, just use 'unzip -a *.zip', it will be fine.
I recently encountered this error in a fedora32 docker container, because the which utility was not installed. I was compiling Qt 5.12.9.
dnf install which fixed the problem.
You should have been installed build-essentials but did not restart try either to restart or type:
export MAKE=/usr/bin/make
and make sure with echo $MAKE
I downloaded the source again. I am able to run configure without any problems. Seems like there was an issue with the earlier source.
you should install build essentials
sudo apt-get install build-essential
and typesudo apt make install
I am new to doing manually installing.
I reinstalled sdl manually, now everytime I run pygame or a game that uses SDL (eg. solarwolf or supertux) I get the message: Unsupported console hardware.
I know my computer can run SDL, because it worked prior to the reinstallation.
I want to now how I can reinstall SDL properly, so that pygame will work again.
versions:
ubuntu: Ubuntu 10.04 LTS Lucid Lynx
sdl: 1.2.14
Stuff I have tried:
1)
I have tried this commandoes I found on the net:
wget http://www.libsdl.org/release/SDL-1.2.14.tar.gz
tar -xzvf SDL-1.2.14.tar.gz
cd SDL-1.2.14
./configure --prefix=$HOME
make
make install
2)
I tried again with sudo and no prefix. Maybe that wrecked some prior configurationsfile or something?
wget http://www.libsdl.org/release/SDL-1.2.14.tar.gz
tar -xzvf SDL-1.2.14.tar.gz
cd SDL-1.2.14
./configure
make
sudo make install
3)I used the Synaptic Package Manager to completely remove and reinstall all files starting with libsdl.
4)I have tried reinstalling supertux and solarwolf (with ubuntu software senter)
hoping it could resolve the problem if there were some missing dependencies.
Conclusion. I geuss a have installed sdl, but wrecked a confirgurationfile or something preventing communication between sdl and the graphic driver.
But that is a wild guess.
This sounds strange.
try: sudo ldconfig
from man ldconfig
"ldconfig creates, updates, and removes the necessary links and cache
(for use by the run-time linker, ld.so) to the most recent shared
libraries found in the directories specified on the command line, in
the file /etc/ld.so.conf, and in the trusted directories (/usr/lib and
/lib). ldconfig checks the header and file names of the libraries it
encounters when determining which versions should have their links
updated. ldconfig ignores symbolic links when scanning for libraries.
"
How to download and install GDB(GNU Debugger) on Fedora Linux Machine.. I have tried downloading from gnu website 7.1 package, but then it fails during
./configure and then make command...
Please share the source from where i can get information on the same.
Thanks..
I have found this tutorial which might be helpful to install gdb.
http://www.tutorialspoint.com/gnu_debugger/installing_gdb.htm
But for me the command:
yum install gdb
works.
You may need to install some development packages with header files needed to build gdb. The exact package list depends on error messages from ./configure and make. Here is installed package list on my system:
# rpm -qa "*devel"
kernel-devel-2.6.23.1-42.fc8
ncurses-devel-5.6-12.20070812.fc8
python-devel-2.5.1-15.fc8
expat-devel-2.0.1-2
libtirpc-devel-0.1.7-12.fc8
glibc-devel-2.7-2
libstdc++-devel-4.1.2-33
Try to install all of them with yum.