I am trying to read data from binary file, and having issues. I have reduced it down to the most simple case here, and it still won't work. I am new to c++ so I may be doing something silly but, if anyone could advise I would be very grateful.
Code:
int main(int argc,char *argv[]) {
ifstream myfile;
vector<bool> encoded2;
cout << encoded2 << "\n"<< "\n" ;
myfile.open(argv[2], ios::in | ios::binary |ios::ate );
myfile.seekg(0,ios::beg);
myfile.read((char*)&encoded2, 1 );
myfile.close();
cout << encoded2 << "\n"<< "\n" ;
}
Output
00000000
000000000000000000000000000011110000000000001000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Compression_Program(58221) malloc: * error for object 0x10012d: Non-aligned pointer being freed
* set a breakpoint in malloc_error_break to debug
Thanks in advance.
Do not cast a vector<bool>* to a char*. It is does not do anything predictable.
You are reading on encoded2: myfile.read((char*)&encoded2, 1 );. this is wrong. you can to read a bool and then put it in encoded2
bool x;
myfile.read( &x, 1 );
encoded2[0] = x;
Two mistakes here:
you assume the address of a vector is the address of the first element
you rely on vector<bool>
Casting a vector into a char * is not really a good thing, because a vector is an object and stores some state along with its elements.
Here you are probably overwriting the state of the vector, thus the destructor of fails.
Maybe you would like to cast the elements of the vector (which are guaranteed to be stored contiguously in memory). But another trap is that vector<bool> may be implementation-optimized.
Therefore you should do a encoded2.reserve(8) and use myfile.read(reinterpret_cast<char *>(&encoded2[0])).
But probably you want to do something else and we need to know what the purpose is here.
You're overwriting a std::vector, which you shouldn't do. A std::vector is actually a pointer to a data array and an integer (probably a size_t) holding its size; if you overwrite these with practically random bits, data corruption will occur.
Since you're only reading a single byte, this will suffice:
char c;
myfile.read(&c, 1);
The C++ language does not provide an efficient I/O method for reading bits as bits. You have to read bits in groups. Also, you have to worry about Endianess when reading int the bits.
I suggest the old fashioned method of allocating a buffer, reading into the buffer then operating on the buffer.
Allocating a buffer
const unsigned int BUFFER_SIZE = 1024 * 1024; // Let the compiler calculate it.
//...
unsigned char * const buffer = new unsigned char [BUFFER_SIZE]; // The pointer is constant.
Reading in the data
unsigned int bytes_read = 0;
ifstream data_file("myfile.bin", ios::binary); // Open file for input without translations.
data_file.read(buffer, BUFFER_SIZE); // Read data into the buffer.
bytes_read = data_file.gcount(); // Get actual count of bytes read.
Reminders:
delete the buffer when you are
finished with it.
Close the file when you are finished
with it.
myfile.read((char*) &encoded2[0], sizeof(int)* COUNT);
or you can use push_back();
int tmp;
for(int i = 0; i < COUNT; i++) {
myfile.read((char*) &tmp, 4);
encoded2.push_back(tmp);
}
Related
I did a sample project to read a file into a buffer.
When I use the tellg() function it gives me a larger value than the
read function is actually read from the file. I think that there is a bug.
here is my code:
EDIT:
void read_file (const char* name, int *size , char*& buffer)
{
ifstream file;
file.open(name,ios::in|ios::binary);
*size = 0;
if (file.is_open())
{
// get length of file
file.seekg(0,std::ios_base::end);
int length = *size = file.tellg();
file.seekg(0,std::ios_base::beg);
// allocate buffer in size of file
buffer = new char[length];
// read
file.read(buffer,length);
cout << file.gcount() << endl;
}
file.close();
}
main:
void main()
{
int size = 0;
char* buffer = NULL;
read_file("File.txt",&size,buffer);
for (int i = 0; i < size; i++)
cout << buffer[i];
cout << endl;
}
tellg does not report the size of the file, nor the offset
from the beginning in bytes. It reports a token value which can
later be used to seek to the same place, and nothing more.
(It's not even guaranteed that you can convert the type to an
integral type.)
At least according to the language specification: in practice,
on Unix systems, the value returned will be the offset in bytes
from the beginning of the file, and under Windows, it will be
the offset from the beginning of the file for files opened in
binary mode. For Windows (and most non-Unix systems), in text
mode, there is no direct and immediate mapping between what
tellg returns and the number of bytes you must read to get to
that position. Under Windows, all you can really count on is
that the value will be no less than the number of bytes you have
to read (and in most real cases, won't be too much greater,
although it can be up to two times more).
If it is important to know exactly how many bytes you can read,
the only way of reliably doing so is by reading. You should be
able to do this with something like:
#include <limits>
file.ignore( std::numeric_limits<std::streamsize>::max() );
std::streamsize length = file.gcount();
file.clear(); // Since ignore will have set eof.
file.seekg( 0, std::ios_base::beg );
Finally, two other remarks concerning your code:
First, the line:
*buffer = new char[length];
shouldn't compile: you have declared buffer to be a char*,
so *buffer has type char, and is not a pointer. Given what
you seem to be doing, you probably want to declare buffer as
a char**. But a much better solution would be to declare it
as a std::vector<char>& or a std::string&. (That way, you
don't have to return the size as well, and you won't leak memory
if there is an exception.)
Second, the loop condition at the end is wrong. If you really
want to read one character at a time,
while ( file.get( buffer[i] ) ) {
++ i;
}
should do the trick. A better solution would probably be to
read blocks of data:
while ( file.read( buffer + i, N ) || file.gcount() != 0 ) {
i += file.gcount();
}
or even:
file.read( buffer, size );
size = file.gcount();
EDIT: I just noticed a third error: if you fail to open the
file, you don't tell the caller. At the very least, you should
set the size to 0 (but some sort of more precise error
handling is probably better).
In C++17 there are std::filesystem file_size methods and functions, so that can streamline the whole task.
std::filesystem::file_size - cppreference.com
std::filesystem::directory_entry::file_size - cppreference.com
With those functions/methods there's a chance not to open a file, but read cached data (especially with the std::filesystem::directory_entry::file_size method)
Those functions also require only directory read permissions and not file read permission (as tellg() does)
void read_file (int *size, char* name,char* buffer)
*buffer = new char[length];
These lines do look like a bug: you create an char array and save to buffer[0] char. Then you read a file to buffer, which is still uninitialized.
You need to pass buffer by pointer:
void read_file (int *size, char* name,char** buffer)
*buffer = new char[length];
Or by reference, which is the c++ way and is less error prone:
void read_file (int *size, char* name,char*& buffer)
buffer = new char[length];
...
fseek(fptr, 0L, SEEK_END);
filesz = ftell(fptr);
will do the file if file opened through fopen
using ifstream,
in.seekg(0,ifstream::end);
dilesz = in.tellg();
would do similar
I'm writing a resource file which I want to insert a bunch of data from various common files such as .JPG, .BMP (for example) and I want it to be in binary.
I'm going to code something to retrieve these data later on organized by index, and this is what I got so far:
float randomValue = 23.14f;
ofstream fileWriter;
fileWriter.open("myFile.dat", ios::binary);
fileWriter.write((char*)&randomValue, sizeof(randomValue));
fileWriter.close();
//With this my .dat file, when opened in notepad has "B!¹A" in it
float retrieveValue = 0.0f;
ifstream fileReader;
fileReader.open("myFile.dat", ios::binary);
fileReader.read((char*)&retrieveValue, sizeof(retrieveValue));
fileReader.close();
cout << retrieveValue << endl; //This gives me exactly the 23.14 I wanted, perfect!
While this works nicely, I'd like to understand what exactly is happening there.
I'm converting the address of randomValue to char*, and writing the values in this address to the file?
I'm curious also because I need to do this for an array, and I can't do this:
int* myArray = new int[10];
//fill myArray values with random stuff
fileWriter.open("myFile.dat", ios::binary);
fileWriter.write((char*)&myArray, sizeof(myArray));
fileWriter.close();
From what I understand, this would just write the first address' value in the file, not all the array. So, for testing, I'm trying to simply convert a variable to a char* which I would write to a file, and convert back to the variable to see if I'm retrieving the values correctly, so I'm with this:
int* intArray = new int[10];
for(int i = 0; i < 10; i++)
{
cout << &intArray[i]; //the address of each number in my array
cout << intArray[i]; //it's value
cout << reinterpret_cast<char*>(&intArray[i]); //the char* value of each one
}
But for some reason I don't know, my computer "beeps" when I run this code. During the array, I'm also saving these to a char* and trying to convert back to int, but I'm not getting the results expected, I'm getting some really long values.
Something like:
float randomValue = 23.14f;
char* charValue = reinterpret_cast<char*>(&randomValue);
//charValue contains "B!¹A" plus a bunch of other (un-initiallized values?) characters, so I'm guessing the value is correct
//Now I'm here
I want to convert charValue back to randomValue, how can I do it?
edit: There's valuable information in the answers below, but they don't solve my (original) problem. I was testing these type of conversions because I'm doing a code that I will pick a bunch of resource files such as BMP, JPG, MP3, and save them in a single .DAT file organized by some criteria I still haven't fully figured out.
Later, I am going to use this resource file to read from and load these contents into a program (game) I'm coding.
The criteria I am still thinking but I was wondering if it's possible to do something like this:
//In my ResourceFile.DAT
[4 bytes = objectID][3 bytes = objectType (WAV, MP3, JPG, BMP, etc)][4 bytes = objectLength][objectLength bytes = actual objectData]
//repeating this until end of file
And then in the code that reads the resource file, I want to do something like this (untested):
ifstream fileReader;
fileReader.open("myFile.DAT", ios::binary);
//file check stuff
while(!fileReader.eof())
{
//Here I'll load
int objectID = 0;
fileReader((char*)&objectID, 4); //read 4 bytes to fill objectID
char objectType[3];
fileReader(&objectType, 3); //read the type so I know which parser use
int objectLength = 0;
fileReader((char*)&objectLength, 4); //get the length of the object data
char* objectData = new char[objectLength];
fileReader(objectData, objectLength); //fill objectData with the data
//Here I'll use a parser to fill classes depending on the type etc, and move on to the next obj
}
Currently my code is working with the original files (BMP, WAV, etc) and filling them into classes, and I want to know how I can save the data from these files into a binary data file.
For example, my class that manages BMP data has this:
class FileBMP
{
public:
int imageWidth;
int imageHeight;
int* imageData;
}
When I load it, I call:
void FileBMP::Load(int iwidth, int iheight)
{
int imageTotalSize = iwidth * iheight * 4;
imageData = new int[imageTotalSize]; //This will give me 4 times the amount of pixels in the image
int cPixel = 0;
while(cPixel < imageTotalSize)
{
imageData[cPixel] = 0; //R value
imageData[cPixel + 1] = 0; //G value
imageData[cPixel + 2] = 0; //B value
imageData[cPixel + 3] = 0; //A value
cPixel += 4;
}
}
So I have this single dimension array containing values in the format of [RGBA] per pixel, which I am using later on for drawing on screen.
I want to be able to save just this array in the binary data format that I am planning that I stated above, and then read it and fill this array.
I think it's asking too much for a code like this, so I'd like to understand what I need to know to save these values into a binary file and then read back to fill it.
Sorry for the long post!
edit2: I solved my problem by making the first edit... thanks for the valuable info, I also got to know what I wanted to!
By using the & operator, you're getting a pointer to the contents of the variable (think of it as just a memory address).
float a = 123.45f;
float* p = &a; // now p points to a, i.e. has the memory address to a's contents.
char* c = (char*)&a; // c points to the same memory location, but the code says to treat the contents as char instead of float.
When you gave the (char*)&randomValue for write(), you simply told "take this memory address having char data and write sizeof(randomValue) chars from there". You're not writing the address value itself, but the contents from that location of memory ("raw binary data").
cout << reinterpret_cast<char*>(&intArray[i]); //the char* value of each one
Here you're expected to give char* type data, terminated with a null char (zero). However, you're providing the raw bytes of the float value instead. Your program might crash here, as cout will input chars until it finds the terminator char -- which it might not find anytime soon.
float randomValue = 23.14f;
char* charValue = reinterpret_cast<char*>(&randomValue);
float back = *(float*)charValue;
Edit: to save binary data, you simply need to provide the data and write() it. Do not use << operator overloads with ofstream/cout. For example:
int values[3] = { 5, 6, 7 };
struct AnyData
{
float a;
int b;
} data;
cout.write((char*)&values, sizeof(int) * 3); // the other two values follow the first one, you can write them all at once.
cout.write((char*)&data, sizeof(data)); // you can also save structs that do not have pointers.
In case you're going to write structs, have a look at #pragma pack compiler directive. Compilers will align (use padding) variable to certain size (int), which means that the following struct actually might require 8 bytes:
#pragma pack (push, 1)
struct CouldBeLongerThanYouThink
{
char a;
char b;
};
#pragma pack (pop)
Also, do not write pointer values itself (if there are pointer members in a struct), because the memory addresses will not point to any meaningful data once read back from a file. Always write the data itself, not pointer values.
What's happening is that you're copying the internal
representation of your data to a file, and then copying it back
into memory, This works as long as the program doing the
writing was compiled with the same version of the compiler,
using the same options. Otherwise, it might or it might not
work, depending on any number of things beyond your control.
It's not clear to me what you're trying to do, but formats like
.jpg and .bmp normally specify the format they want the
different types to have, and you have to respect that format.
It is unclear what you really want to do, so I cannot recommend a way of solving your real problem. But I would not be surprised if running the program actually caused beeps or any other strange behavior in your program.
int* intArray = new int[10];
for(int i = 0; i < 10; i++)
{
cout << reinterpret_cast<char*>(&intArray[i]);
}
The memory returned by new above is uninitialized, but you are trying to print it as if it was a null terminated string. That uninitialized memory could have the bell character (that causes beeps when printed to the terminal) or any other values, including that it might potentially not have a null termination and the insertion operator into the stream will overrun the buffer until it either finds a null or your program crashes accessing invalid memory.
There are other incorrect assumptions in your code, like for example given int *p = new int[10]; the expression sizeof(p) will be the size of a pointer in your architecture, not 10 times the size of an integer.
I'm trying to read from a binary file, using fstream, some data I have previously written there.
The problem is that after getting to the end of the function the message in the subject is shown
The code is the following:
ifstream in("contrib.bin", ios::in | ios::binary );
char *nume, dim;
in.read((char*)&dim, sizeof(int));
nume = new char[dim + 1];
in.read(nume, dim);
nume[dim] = '\0';
double imp;
in.read((char*)&imp, sizeof(double));
delete [] nume;
Now, I've done my homework and looked for this issue, but the other people who faced it had arrays, whereas my variable is a simple char.
Can someone point me to the right direction, please?
The code
char dim;
in.read((char*)&dim, sizeof(int));
defines a 1 byte char then reads sizeof(int) bytes (which is likely to be greater that 1) into it. This is invalid and may corrupt your stack.
If you need to read sizeof(int) bytes, declare dim as int. Otherwise, change the number of bytes you read to 1. It'd be best if you also used sizeof(dim) to ensure that you only read as many bytes as you've provided storage for:
in.read((char*)&dim, sizeof(dim));
in.read((char*)&dim, sizeof(int)); is not correct, dim only holds sizeof(char) which is one, but you're attempting to read sizeof(int) into it.
All gloves are off after this.
Well you define a character then read in the size of an int. That would be the first issue
char *nume, dim;
in.read((char*)&dim, sizeof(char));
None of the posted answers I've read work, so I'm asking again.
I'm trying to copy the string data pointed to by a char pointer into a char array.
I have a function that reads from a ifstream into a char array
char* FileReader::getNextBytes(int numberOfBytes) {
char *buf = new char[numberOfBytes];
file.read(buf, numberOfBytes);
return buf;
}
I then have a struct :
struct Packet {
char data[MAX_DATA_SIZE]; // can hold file name or data
} packet;
I want to copy what is returned from getNextBytes(MAX_DATA_SIZE) into packet.data;
EDIT: Let me show you what I'm getting with all the answers gotten below (memcpy, strcpy, passing as parameter). I'm thinking the error comes from somewhere else. I'm reading a file as binary (it's a png). I'll loop while the fstream is good() and read from the fstream into the buf (which might be the data array). I want to see the length of what I've read :
cout << strlen(packet.data) << endl;
This returns different sizes every time:
8
529
60
46
358
66
156
After that, apparently there are no bytes left to read although the file is 13K + bytes long.
This can be done using standard library function memcpy, which is declared in / :
strcpy(packet.data, buf);
This requires file.read returns proper char series that ends with '\0'. You might also want to ensure numberOfBytes is big enough to accommodate the whole string. Otherwise you could possibly get segmentation fault.
//if buf not properly null terminated added a null char at the end
buf[numberofbytes] = "\0"
//copy the string from buf to struc
strcpy(packet.data, buf);
//or
strncpy(packet.data, buf);
Edit:
Whether or not this is being handled as a string is a very important distinction. In your question, you referred to it as a "string", which is what got us all confused.
Without any library assistance:
char result = reader.getNextBytes(MAX_DATA_SIZE);
for (int i = 0; i < MAX_DATA_SIZE; ++MAX_DATA_SIZE) {
packet.data[i] = result[i];
}
delete [] result;
Using #include <cstring>:
memcpy(packet.data, result, MAX_DATA_SIZE);
Or for extra credit, rewrite getNextBytes so it has an output parameter:
char* FileReader::getNextBytes(int numberOfBytes, char* buf) {
file.read(buf, numberOfBytes);
return buf;
}
Then it's just:
reader.getNextBytes(MAX_DATA_SIZE, packet.data);
Edit 2:
To get the length of a file:
file.seekg (0, ios::end);
int length = file.tellg();
file.seekg (0, ios::beg);
And with that in hand...
char* buffer = new char[length];
file.read(buffer, length);
Now you have the entire file in buffer.
strlen is not a valid way to determine the amount of binary data. strlen just reads until it finds '\0', nothing more. If you want to read a chunk of binary data, just use a std::vector, resize it to the amount of bytes you read from the file, and return it as value. Problem solved.
Hello I have a chunk of memory (allocated with malloc()) that contains bits (bit literal), I'd like to read it as an array of char, or, better, I'd like to printout the ASCII value of 8 consecutively bits of the memory.
I have allocated he memory as char *, but I've not been able to take characters out in a better way than evaluating each bit, adding the value to a char and shifting left the value of the char, in a loop, but I was looking for a faster solution.
Thank you
What I've wrote for now is this:
for allocation:
char * bits = (char*) malloc(1);
for writing to mem:
ifstream cleartext;
cleartext.open(sometext);
while(cleartext.good())
{
c = cleartext.get();
for(int j = 0; j < 8; j++)
{ //set(index) and reset(index) set or reset the bit at bits[i]
(c & 0x80) ? (set(index)):(reset(index));//(*ptr++ = '1'):(*ptr++='0');
c = c << 1;
}..
}..
and until now I've not been able to get character back, I only get the bits printed out using:
printf("%s\n" bits);
An example of what I'm trying to do is:
input.txt contains the string "AAAB"
My program would have to write "AAAB" as "01000001010000010100000101000010" to memory
(it's the ASCII values in bit of AAAB that are 65656566 in bits)
Then I would like that it have a function to rewrite the content of the memory to a file.
So if memory contains again "01000001010000010100000101000010" it would write to the output file "AAAB".
int numBytes = 512;
char *pChar = (char *)malloc(numBytes);
for( int i = 0; i < numBytes; i++ ){
pChar[i] = '8';
}
Since this is C++, you can also use "new":
int numBytes = 512;
char *pChar = new char[numBytes];
for( int i = 0; i < numBytes; i++ ){
pChar[i] = '8';
}
If you want to visit every bit in the memory chunk, it looks like you need std::bitset.
char* pChunk = malloc( n );
// read in pChunk data
// iterate over all the bits.
for( int i = 0; i != n; ++i ){
std::bitset<8>& bits = *reinterpret_cast< std::bitset<8>* >( pByte );
for( int iBit = 0; iBit != 8; ++iBit ) {
std::cout << bits[i];
}
}
I'd like to printout the ASCII value of 8 consecutively bits of the memory.
The possible value for any bit is either 0 or 1. You probably want at least a byte.
char * bits = (char*) malloc(1);
Allocates 1 byte on the heap. A much more efficient and hassle-free thing would have been to create an object on the stack i.e.:
char bits; // a single character, has CHAR_BIT bits
ifstream cleartext;
cleartext.open(sometext);
The above doesn't write anything to mem. It tries to open a file in input mode.
It has ascii characters and common eof or \n, or things like this, the input would only be a textfile, so I think it should only contain ASCII characters, correct me if I'm wrong.
If your file only has ASCII data you don't have to worry. All you need to do is read in the file contents and write it out. The compiler manages how the data will be stored (i.e. which encoding to use for your characters and how to represent them in binary, the endianness of the system etc). The easiest way to read/write files will be:
// include these on as-needed basis
#include <algorithm>
#include <iostream>
#include <iterator>
#include <fstream>
using namespace std;
// ...
/* read from standard input and write to standard output */
copy((istream_iterator<char>(cin)), (istream_iterator<char>()),
(ostream_iterator<char>(cout)));
/*-------------------------------------------------------------*/
/* read from standard input and write to text file */
copy(istream_iterator<char>(cin), istream_iterator<char>(),
ostream_iterator<char>(ofstream("output.txt"), "\n") );
/*-------------------------------------------------------------*/
/* read from text file and write to text file */
copy(istream_iterator<char>(ifstream("input.txt")), istream_iterator<char>(),
ostream_iterator<char>(ofstream("output.txt"), "\n") );
/*-------------------------------------------------------------*/
The last remaining question is: Do you want to do something with the binary representation? If not, forget about it. Else, update your question one more time.
E.g: Processing the character array to encrypt it using a block cipher
/* a hash calculator */
struct hash_sha1 {
unsigned char operator()(unsigned char x) {
// process
return rc;
}
};
/* store house of characters, could've been a vector as well */
basic_string<unsigned char> line;
/* read from text file and write to a string of unsigned chars */
copy(istream_iterator<unsigned char>(ifstream("input.txt")),
istream_iterator<char>(),
back_inserter(line) );
/* Calculate a SHA-1 hash of the input */
basic_string<unsigned char> hashmsg;
transform(line.begin(), line.end(), back_inserter(hashmsg), hash_sha1());
Something like this?
char *buffer = (char*)malloc(42);
// ... put something into the buffer ...
printf("%c\n", buffer[0]);
But, since you're using C++, I wonder why you bother with malloc and such...
char* ptr = pAddressOfMemoryToRead;
while(ptr < pAddressOfMemoryToRead + blockLength)
{
char tmp = *ptr;
// temp now has the char from this spot in memory
ptr++;
}
Is this what you are trying to achieve:
char* p = (char*)malloc(10 * sizeof(char));
char* p1 = p;
memcpy(p,"abcdefghij", 10);
for(int i = 0; i < 10; ++i)
{
char c = *p1;
cout<<c<<" ";
++p1;
}
cout<<"\n";
free(p);
Can you please explain in more detail, perhaps including code? What you're saying makes no sense unless I'm completely misreading your question. Are you doing something like this?
char * chunk = (char *)malloc(256);
If so, you can access any character's worth of data by treating chunk as an array: chunk[5] gives you the 5th element, etc. Of course, these will be characters, which may be what you want, but I can't quite tell from your question... for instance, if chunk[5] is 65, when you print it like cout << chunk[5];, you'll get a letter 'A'.
However, you may be asking how to print out the actual number 65, in which case you want to do cout << int(chunk[5]);. Casting to int will make it print as an integer value instead of as a character. If you clarify your question, either I or someone else can help you further.
Are you asking how to copy the memory bytes of an arbitrary struct into a char* array? If so this should do the trick
SomeType t = GetSomeType();
char* ptr = malloc(sizeof(SomeType));
if ( !ptr ) {
// Handle no memory. Probably should just crash
}
memcpy(ptr,&t,sizeof(SomeType));
I'm not sure I entirely grok what you're trying to do, but a couple of suggestions:
1) use std::vector instead of malloc/free and new/delete. It's safer and doesn't have much overhead.
2) when processing, try doing chunks rather than bytes. Even though streams are buffered, it's usually more efficient grabbing a chunk at a time.
3) there's a lot of different ways to output bits, but again you don't want a stream output for each character. You might want to try something like the following:
void outputbits(char *dest, char source)
{
dest[8] = 0;
for(int i=0; i<8; ++i)
dest[i] = source & (1<<(7-i)) ? '1':'0';
}
Pass it a char[9] output buffer and a char input, and you get a printable bitstring back. Decent compilers produce OK output code for this... how much speed do you need?