My goal is to construct a derived classes nested class from the interface. However the nested classes don't have the same constructors. The question is how can I make an interface to create two different "sub-nested" classes.
Constraints:
Cannot use Heap
Nested Classes' Methods cannot be called before it is constructed
C++ 17
ITest::INestedTest* MakeTest(ITest* test, ITest::Config config)
{
// Can't call directly because it's not on the interface i.e. test.InitializeNestedTest ...
// Only workable situation is this:
if (condition)
{
auto myTest = static_cast<Test2::Test*>(test);
int p = 2;
return myTest->InitalizeNestedTest(config, p);
// ERROR function returning abstract class not allowed
} else {
auto myTest = static_cast<Test1::Test*>(test);
return myTest->InitalizeNestedTest(config);
// ERROR function returning abstract class not allowed
}
}
This static cast didn't return what I wanted previously because I was returning a pointer to a locally defined variable, which was pointed out in the comments. How am I able to return a class from this since it's an abstract class, do i need to cast it again or make multiple functions?
Test1::Test myTest;
auto myNestedTest = myTest.InitializeNestedTest(config);
I've thought of a few options but none of them seem right, or I'm not entirely sure how to implement them
Have an overloaded Virtual function for each type on the interface and then override them on the subclass (not sure if possible and doesn't seem like the right way to do it)
Extend the Config struct Test2 namespace so that it includes parameter p, so that they all have the same prototype and put it on the interface. (is it possible to "extend" the struct" from the interface?)
Maybe use a different type of cast, or do so in a different way?
I've included the definitions of my Interface and two subclasses for reference.
class ITest
{
//other things in ITest.hpp not relevant to question
public:
struct Config
{
int a;
bool enable;
};
class INestedTest
{
public:
virtual void Enable() const = 0;
virtual void Configure(Config const& config)
{
if(config.enable)
{
Enable();
}
}
};
};
namespace Test1
{
class Test : public ITest
{
public:
class NestedTest : public ITest::INestedTest
{
public:
NestedTest(Config const& config)
{
Configure(config);
}
void Enable() const override
{
//impl
}
}; // End NestedTest
NestedTest InitalizeNestedTest(Config const& config)
{
return NestedTest(config);
}
};
};
namespace Test2
{
class Test : public ITest
{
public:
class NestedTest : public ITest::INestedTest
{
public:
using Parameter = int;
NestedTest(ITest::Config const& config, Parameter p)
{
Configure(config);
}
void Enable() const override
{
//impl
}
}; // End NestedTest
NestedTest InitalizeNestedTest(Config const& config, NestedTest::Parameter p)
{
return NestedTest(config, p);
}
};
};
Maybe you could make the object static so it's declared in RAM at compile time (and not heap or stack).
I would like to test method "methodToTest" in class A:
typedef std::function F_global;
struct A
{
F_global m_F_global;
A(F_global m_F_global) : p_F_global(m_F_global) {}
void methodToTest()
{
m_F_global(5);
}
};
I have got a mock class:
class RunMock
{
public:
MOCK_METHOD1(run, void (int));
};
Below I have got a test case:
class TestClass : public testing::Test
{
protected:
void SetUp();
std::unique_ptr<A> m_aa;
std::unique_ptr<RunMock> m_runMock;
};
void UecSimplePortTestSuite::SetUp()
{
m_aa = make_unique<A>(m_runMock->run);//IT DOESN'T WORK I DON'T KNOW HOW TO FORWARD A METHOD run from RunMock to constructor
}
TEST_F(UecSimplePortTestSuite, testForwardMessage)
{
EXPECT_CALL(*m_runMock, run(_));
m_aa->methodToTest();
}
Generally I don't know how transfer a method "run" from Mock class "RunMock" in "UecSimplePortTestSuite::SetUp()". I would like to do this, because
I would like to "EXPECT_CALL(*m_runMock, run(_));" in UecSimplePortTestSuite.testForwardMessage to test "methodToTest()".
I think that good idea could be to use lmbda, std::boost::bind or something like this.
You can pass a lambda to the constructor of A in the SetUp() :
m_runMock.reset( new RunMock );
m_aa.reset( new A( [&](int value){ m_runMock->run(value); } );
This :
m_runMock->run
is not going to do what you thing, and it is a compilation error. You can read this parashift QA and here how to use pointer to member function.
I want to create a class factory and I would like to use reflection for that. I just need to
create a object with given string and invoke only few known methods.
How i can do that?
You will have to roll your own. Usually you have a map of strings to object creation functions.
You will need something like the follwing:
class thing {...};
/*
class thing_A : public thing {...};
class thing_B : public thing {...};
class thing_C : public thing {...};
*/
std::shared_ptr<thing> create_thing_A();
std::shared_ptr<thing> create_thing_C();
std::shared_ptr<thing> create_thing_D();
namespace {
typedef std::shared_ptr<thing> (*create_func)();
typedef std::map<std::string,create_func> creation_map;
typedef creation_map::value_type creation_map_entry;
const creation_map_entry creation_map_entries[] = { {"A", create_thing_A}
, {"B", create_thing_B}
, {"C", create_thing_C} };
const creation_map creation_funcs(
creation_map_entries,
creation_map_entries + sizeof(creation_map_entries)
/ sizeof(creation_map_entries[0] );
}
std::shared_ptr<thing> create_thing(const std::string& type)
{
const creation_ma::const_iterator it = creation_map.find(type);
if( it == creation_map.end() ) {
throw "Dooh!"; // or return NULL or whatever suits you
}
return it->second();
}
There are other ways to do this (like having a map of strings to objects from which to clone), but I think they all boil down to having a map of strings to something related to the specific types.
There is no reflection in C++, directly supported by the standard.
However C++ is sufficiently low-level that you can implement some minimal support for reflection to complete the task at hand.
For the simple task of creating a Factory, you usually use the Prototype approach:
class Base
{
public:
virtual Base* clone() const = 0;
virtual ~Base();
};
class Factory
{
public:
std::unique_ptr<Base> get(std::string const& name);
void set(std::string const& name, std::unique_ptr<Base> b);
private:
boost::ptr_map<std::string,Base> mExemplars;
};
Of course, those "known methods" that you are speaking about should be defined within the Base class, which acts as an interface.
There is no reflection in C++, so you should restate your question trying to explain what are the requirements that you would have fulfilled with the reflection part of it.
Depending on your actual constraints and requirements, there are a few things that you can do. The first approach that I would take would be creating an abstract factory where concrete factories can register and provide a simple interface:
class Base {}; // shared base by all created objects
class ConcreteFactoryBase {
public:
virtual ~ConcreteFactoryBase() {}
virtual Base* create() const = 0; // actual construction
virtual std::string id() const = 0; // id of the types returned
};
class AbstractFactory
{
typedef std::map<std::string, ConcreteFactory* > factory_map_t;
public:
void registerFactory( ConcreteFactoryBase* factory ) {
factories[ factory->id() ] = factory;
}
Base* create( std::string const & id ) const {
factory_map_t::const_iterator it = factories.find( id );
if ( it == factories.end() ) {
return 0; // or throw, or whatever makes sense in your case
}
return (*it)->create();
}
~AbstractFactory(); // ensure that the concrete factories are deleted
private:
std::map<ConcreteFactoryBase*> factories;
};
The actual concrete factories can be implemented manually but they can probably be templated, unless the constructors for the different types require different arguments:
template <typename T>
class ConcreteFactory : public ConcreteFactoryBase {
public:
ConcreteFactory( std::string const & id ) : myid(id) {}
virtual Base* create() const {
return new T;
}
virtual std::string id() const {
return myid;
}
private:
std::string myid;
};
class Test : public Base {};
int main() {
AbstracFactory factory;
factory.register_factory( new ConcreteFactory<Test>("Test") );
}
Optionally you could adapt the signatures so that you can pass arguments to the constructor through the different layers.
Then again, by knowing the actual constraints some other approaches might be better. The clone() approach suggested elsewhere is good (either by actually cloning or by creating an empty object of the same type). That is basically blending the factory with the objects themselves so that each object is a factory of objects of the same type. I don't quite like mixing those two responsabilities but it might be one of the simplest approaches with less code to write.
You could use typeid & templates to implement the factory so you won't need strings at all.
#include <string>
#include <map>
#include <typeinfo>
//***** Base *****
class Base
{
public:
virtual ~Base(){} //needs to be virtual to make typeid work
};
//***** C1 *****
class C1 : public Base
{};
//***** Factory *****
class Factory
{
public:
template <class T>
Base& get();
private:
typedef std::map<std::string, Base> BaseMap;
BaseMap m_Instances;
};
template <class T>
Base& Factory::get()
{
BaseMap::const_iterator i = m_Instances.find(typeid(T).name());
if(i == m_Instances.end()) {
m_Instances[typeid(T).name()] = T();
}
return m_Instances[typeid(T).name()];
}
//***** main *****
int main(int argc, char *argv[])
{
Factory f;
Base& c1 = f.get<C1>();
return 0;
}
Please, consider the following (I'm sorry for the amount of code; but this is the minimal example I could think of...):
class SomeDataThingy
{
};
struct IFileSystemProvider
{
virtual ~IFileSystemProvider() {}
//OS pure virtual methods
}
struct DirectFileSystemProvider
{
//Simply redirects the pure virtuals from IFileSystemProvider to OS functions.
}
struct SomeDataBlock
{
//Stored inside SomeDataThingy; contains specific data
SomeDataBlock(const SomeDataThingy& subject, const IFileSystemProvider& os = DirectFileSystemProvider())
{
//Calculate some data from the Operating System based upon a filename stored in SomeDataThingy.
}
};
struct IFilter
{
virtual ~IFilter() {}
virtual int Matches(const SomeDataThingy&) const = 0;
virtual void Calculate(SomeDataThingy&) const = 0;
};
class SomeFilter : public IFilter
{
int Matches(const SomeDataThingy& subject) const
{
if (!Subject.Contains<SomeDataBlock>())
return UNKNOWN;
else
return /* This filter matches */
}
void Calculate(SomeDataThingy& subject) const
{
std::auto_ptr<SomeDataBlock> data(new SomeDataBlock(subject));
subject.Install<SomeDataBlock>(data);
}
};
I would like to test SomeFilter::calculate, here. The problem is that the constructor for SomeDataBlock calls out to the filesystem. SomeDataBlock itself is tested by a mock IFileSystemProvider. However, I don't have a simple way to inject the mock into SomeFilter::Calculate; and unfortunately I cannot change the IFilter interface to allow the mock to be passed as an argument to Calculate, because there are other filters for which such a mock would not make any sense.
How can I test Calculate?
Can you modify the constructor of SomeFilter? If so, you can inject IFileSystemProvider that way.
class SomeFilter : public IFilter
{
public:
SomeFilter(const IFileSystemProvider& fs = DirectFileSystemProvider())
: fs(fs)
{
}
private:
int Matches(const SomeDataThingy& subject) const
{
if (!Subject.Contains<SomeDataBlock>())
return UNKNOWN;
else
return /* This filter matches */
}
void Calculate(SomeDataThingy& subject) const
{
std::auto_ptr<SomeDataBlock> data(new SomeDataBlock(subject, fs));
subject.Install<SomeDataBlock>(data);
}
IFileSystemProvider fs;
};
You could also create a public member on SomeFilter to allow the user to provide IFileSystemProvider, before calling Calculate, but after constructing the object.
In my application, there are 10-20 classes that are instantiated once[*]. Here's an example:
class SomeOtherManager;
class SomeManagerClass {
public:
SomeManagerClass(SomeOtherManager*);
virtual void someMethod1();
virtual void someMethod2();
};
Instances of the classes are contained in one object:
class TheManager {
public:
virtual SomeManagerClass* someManagerClass() const;
virtual SomeOtherManager* someOtherManager() const;
/** More objects... up to 10-20 */
};
Currently TheManager uses the new operator in order to create objects.
My intention is to be able to replace, using plugins, the SomeManagerClass (or any other class) implementation with another one. In order to replace the implementation, 2 steps are needed:
Define a class DerivedSomeManagerClass, which inherits SomeManagerClass [plugin]
Create the new class (DerivedSomeManagerClass) instead of the default (SomeManagerClass) [application]
I guess I need some kind of object factory, but it should be fairly simple since there's always only one type to create (the default implementation or the user implementation).
Any idea about how to design a simple factory like I just described? Consider the fact that there might be more classes in the future, so it should be easy to extend.
[*] I don't care if it happens more than once.
Edit: Please note that there are more than two objects that are contained in TheManager.
Assuming a class (plugin1) which inherits from SomeManagerClass, you need a class hierarchy to build your types:
class factory
{
public:
virtual SomeManagerClass* create() = 0;
};
class plugin1_factory : public factory
{
public:
SomeManagerClass* create() { return new plugin1(); }
};
Then you can assign those factories to a std::map, where they are bound to strings
std::map<string, factory*> factory_map;
...
factory_map["plugin1"] = new plugin1_factory();
Finally your TheManager just needs to know the name of the plugin (as string) and can return an object of type SomeManagerClass with just one line of code:
SomeManagerClass* obj = factory_map[plugin_name]->create();
EDIT: If you don't like to have one plugin factory class for each plugin, you could modify the previous pattern with this:
template <class plugin_type>
class plugin_factory : public factory
{
public:
SomeManagerClass* create() { return new plugin_type(); }
};
factory_map["plugin1"] = new plugin_factory<plugin1>();
I think this is a much better solution. Moreover the 'plugin_factory' class could add itself to the 'factory_map' if you pass costructor the string.
I think there are two separate problems here.
One problem is: how does TheManager name the class that it has to create? It must keep some kind of pointer to "a way to create the class". Possible solutions are:
keeping a separate pointer for each kind of class, with a way to set it, but you already said that you don't like this as it violates the DRY principle
keeping some sort of table where the key is an enum or a string; in this case the setter is a single function with parameters (of course if the key is an enum you can use a vector instead of a map)
The other problem is: what is this "way to create a class"? Unfortunately we can't store pointers to constructors directly, but we can:
create, as others have pointed out, a factory for each class
just add a static "create" function for each class; if they keep a consistent signature, you can just use their pointers to functions
Templates can help in avoiding unnecessary code duplication in both cases.
I have answered in another SO question about C++ factories. Please see there if a flexible factory is of interest. I try to describe an old way from ET++ to use macros which has worked great for me.
ET++ was a project to port old MacApp to C++ and X11. In the effort of it Eric Gamma etc started to think about Design Patterns
I'd create a "base" factory that has virtual methods for creation of all the basic managers, and let the "meta manager" (TheManager in your question) take a pointer to the base factory as a constructor parameter.
I'm assuming that the "factory" can customize the instances of CXYZWManager by deriving from them, but alternatively the constructor of CXYZWManager could take different arguments in the "custom" factory.
A lengthy code example that outputs "CSomeManager" and "CDerivedFromSomeManager":
#include <iostream>
//--------------------------------------------------------------------------------
class CSomeManager
{
public:
virtual const char * ShoutOut() { return "CSomeManager";}
};
//--------------------------------------------------------------------------------
class COtherManager
{
};
//--------------------------------------------------------------------------------
class TheManagerFactory
{
public:
// Non-static, non-const to allow polymorphism-abuse
virtual CSomeManager *CreateSomeManager() { return new CSomeManager(); }
virtual COtherManager *CreateOtherManager() { return new COtherManager(); }
};
//--------------------------------------------------------------------------------
class CDerivedFromSomeManager : public CSomeManager
{
public:
virtual const char * ShoutOut() { return "CDerivedFromSomeManager";}
};
//--------------------------------------------------------------------------------
class TheCustomManagerFactory : public TheManagerFactory
{
public:
virtual CDerivedFromSomeManager *CreateSomeManager() { return new CDerivedFromSomeManager(); }
};
//--------------------------------------------------------------------------------
class CMetaManager
{
public:
CMetaManager(TheManagerFactory *ip_factory)
: mp_some_manager(ip_factory->CreateSomeManager()),
mp_other_manager(ip_factory->CreateOtherManager())
{}
CSomeManager *GetSomeManager() { return mp_some_manager; }
COtherManager *GetOtherManager() { return mp_other_manager; }
private:
CSomeManager *mp_some_manager;
COtherManager *mp_other_manager;
};
//--------------------------------------------------------------------------------
int _tmain(int argc, _TCHAR* argv[])
{
TheManagerFactory standard_factory;
TheCustomManagerFactory custom_factory;
CMetaManager meta_manager_1(&standard_factory);
CMetaManager meta_manager_2(&custom_factory);
std::cout << meta_manager_1.GetSomeManager()->ShoutOut() << "\n";
std::cout << meta_manager_2.GetSomeManager()->ShoutOut() << "\n";
return 0;
}
Here's the solution I thought of, it's not the best one but maybe it will help to think of better solutions:
For each class there would be a creator class:
class SomeManagerClassCreator {
public:
virtual SomeManagerClass* create(SomeOtherManager* someOtherManager) {
return new SomeManagerClass(someOtherManager);
}
};
Then, the creators will be gathered in one class:
class SomeManagerClassCreator;
class SomeOtherManagerCreator;
class TheCreator {
public:
void setSomeManagerClassCreator(SomeManagerClassCreator*);
SomeManagerClassCreator* someManagerClassCreator() const;
void setSomeOtherManagerCreator(SomeOtherManagerCreator*);
SomeOtherManagerCreator* someOtherManagerCreator() const;
private:
SomeManagerClassCreator* m_someManagerClassCreator;
SomeOtherManagerCreator* m_someOtherManagerCreator;
};
And TheManager will be created with TheCreator for internal creation:
class TheManager {
public:
TheManager(TheCreator*);
/* Rest of code from above */
};
The problem with this solution is that it violates DRY - for each class creator I would have to write setter/getter in TheCreator.
This seems like it would be a lot simpler with function templating as opposed to an Abstract Factory pattern
class ManagerFactory
{
public:
template <typename T> static BaseManager * getManager() { return new T();}
};
BaseManager * manager1 = ManagerFactory::template getManager<DerivedManager1>();
If you want to get them via a string, you can create a standard map from strings to function pointers. Here is an implementation that works:
#include <map>
#include <string>
class BaseManager
{
public:
virtual void doSomething() = 0;
};
class DerivedManager1 : public BaseManager
{
public:
virtual void doSomething() {};
};
class DerivedManager2 : public BaseManager
{
public:
virtual void doSomething() {};
};
class ManagerFactory
{
public:
typedef BaseManager * (*GetFunction)();
typedef std::map<std::wstring, GetFunction> ManagerFunctionMap;
private:
static ManagerFunctionMap _managers;
public:
template <typename T> static BaseManager * getManager() { return new T();}
template <typename T> static void registerManager(const std::wstring& name)
{
_managers[name] = ManagerFactory::template getManager<T>;
}
static BaseManager * getManagerByName(const std::wstring& name)
{
if(_managers.count(name))
{
return _managers[name]();
}
return NULL;
}
};
// the static map needs to be initialized outside the class
ManagerFactory::ManagerFunctionMap ManagerFactory::_managers;
int _tmain(int argc, _TCHAR* argv[])
{
// you can get with the templated function
BaseManager * manager1 = ManagerFactory::template getManager<DerivedManager1>();
manager1->doSomething();
// or by registering with a string
ManagerFactory::template registerManager<DerivedManager1>(L"Derived1");
ManagerFactory::template registerManager<DerivedManager2>(L"Derived2");
// and getting them
BaseManager * manager2 = ManagerFactory::getManagerByName(L"Derived2");
manager2->doSomething();
BaseManager * manager3 = ManagerFactory::getManagerByName(L"Derived1");
manager3->doSomething();
return 0;
}
EDIT: In reading the other answers I realized that this is very similar to Dave Van den Eynde's FactorySystem solution, but I'm using a function template pointer instead of instantiating templated factory classes. I think my solution is a little more lightweight. Due to static functions, the only object that gets instantiated is the map itself. If you need the factory to perform other functions (DestroyManager, etc.), I think his solution is more extensible.
You could implement an object factory with static methods that return an instance of a Manager-Class. In the factory you could create a method for the default type of manager and a method for any type of manager which you give an argument representing the type of the Manager-Class (say with an enum). This last method should return an Interface rather than a Class.
Edit: I'll try to give some code, but mind that my C++ times are quite a while back and I'm doing only Java and some scripting for the time being.
class Manager { // aka Interface
public: virtual void someMethod() = 0;
};
class Manager1 : public Manager {
void someMethod() { return null; }
};
class Manager2 : public Manager {
void someMethod() { return null; }
};
enum ManagerTypes {
Manager1, Manager2
};
class ManagerFactory {
public static Manager* createManager(ManagerTypes type) {
Manager* result = null;
switch (type) {
case Manager1:
result = new Manager1();
break;
case Manager2:
result = new Manager2();
break;
default:
// Do whatever error logging you want
break;
}
return result;
}
};
Now you should be able to call the Factory via (if you've been able to make the code sample work):
Manager* manager = ManagerFactory.createManager(ManagerTypes.Manager1);
I would use templates like this as I can't see the point of factories classes:
class SomeOtherManager;
class SomeManagerClass {
public:
SomeManagerClass(SomeOtherManager*);
virtual void someMethod1();
virtual void someMethod2();
};
class TheBaseManager {
public:
//
};
template <class ManagerClassOne, class ManagerClassOther>
class SpecialManager : public TheBaseManager {
public:
virtual ManagerClassOne* someManagerClass() const;
virtual ManagerClassOther* someOtherManager() const;
};
TheBaseManager* ourManager = new SpecialManager<SomeManagerClass,SomeOtherManager>;
You should take a look at the tutorial at
http://downloads.sourceforge.net/papafactory/PapaFactory20080622.pdf?use_mirror=fastbull
It contains a great tutorial on implementing an Abstract factory in C++ and the source code that comes with it is also very robust
Chris
Mh I don't understand a hundred percent, and I am not really into factory stuff from books and articles.
If all your managers share a similar interface you could derive from a base class, and use this base class in your program.
Depending on where the decision which class will be created will be made, you have to use an identifier for creation (as stated above) or handle the decision which manager to instantiate internally.
Another way would be to implement it "policy" like by using templates. So that You ManagerClass::create() returns a specific SomeOtherManagerWhatever instance. This would lay the decision which manager to make in the code which uses your Manager - Maye this is not intended.
Or that way:
template<class MemoryManagment>
class MyAwesomeClass
{
MemoryManagment m_memoryManager;
};
(or something like that)
With this construct you can easily use other managers by only changing the instantiation of MyAwesomeClass.
Also A class for this purpose might be a little over the top. In your case a factory function would do I guess. Well it's more a question of personal preference.
If you plan on supporting plugins that are dynamically linked, your program will need to provide a stable ABI (Application Binary Interface), that means that you cannot use C++ as your main interface as C++ has no standard ABI.
If you want plugins to implement an interface you define yourself, you will have to provide the header file of the interface to plugin programmer and standardize on a very simple C interface in order to create and delete the object.
You cannot provide a dynamic library that will allow you to "new" the plugin class as-is. That is why you need to standardize on a C interface in order to create the object. Using the C++ object is then possible as long as none of your arguments use possibly incompatible types, like STL containers. You will not be able to use a vector returned by another library, because you cannot ensure that their STL implementation is the same as yours.
Manager.h
class Manager
{
public:
virtual void doSomething() = 0;
virtual int doSomethingElse() = 0;
}
extern "C" {
Manager* newManager();
void deleteManager(Manager*);
}
PluginManager.h
#include "Manager.h"
class PluginManager : public Manager
{
public:
PluginManager();
virtual ~PluginManager();
public:
virtual void doSomething();
virtual int doSomethingElse();
}
PluginManager.cpp
#include "PluginManager.h"
Manager* newManager()
{
return new PluginManager();
}
void deleteManager(Manager* pManager)
{
delete pManager;
}
PluginManager::PluginManager()
{
// ...
}
PluginManager::~PluginManager()
{
// ...
}
void PluginManager::doSomething()
{
// ...
}
int PluginManager::doSomethingElse()
{
// ...
}
You didnt talk about TheManager. It looks like you want that to control which class is being used? or maybe you trying to chain them together?
It sounds like you need a abstract base class and a pointer to the currently used class. If you wish to chain you can do it in both abstract class and themanager class. If abstract class, add a member to the next class in chain, if themanager then sort it in order you which to use in a list. You'll need a way to add classes so you'll need an addMe() in themanager. It sounds like you know what your doing so w/e you choose should be right. A list with an addMe func is my recommendation and if you want only 1 active class then a function in TheManager deciding it would be good.
This maybe heavier than you need, but it sounds like you are trying to make a frame work class that supports plugins.
I would break it up into to 3 sections.
1) The FrameWork class would own the plugins.
This class is responsable for publishing interfaces supplied by the plugins.
2) A PlugIn class would own the componets that do the work.
This class is responsable for registering the exported interfaces, and binding the imported interfaces to the components.
3) The third section, the componets are the suppliers and consumers of the interfaces.
To make things extensible, getting things up and running might be broke up into stages.
Create everything.
Wire everything up.
Start everything.
To break things down.
Stop everything.
Destroy everything.
class IFrameWork {
public:
virtual ~IFrameWork() {}
virtual void RegisterInterface( const char*, void* ) = 0;
virtual void* GetInterface( const char* name ) = 0;
};
class IPlugIn {
public:
virtual ~IPlugIn() {}
virtual void BindInterfaces( IFrameWork* frameWork ) {};
virtual void Start() {};
virtual void Stop() {};
};
struct SamplePlugin :public IPlugIn {
ILogger* logger;
Component1 component1;
WebServer webServer;
public:
SamplePlugin( IFrameWork* frameWork )
:logger( (ILogger*)frameWork->GetInterface( "ILogger" ) ), //assumes the 'System' plugin exposes this
component1(),
webServer( component1 )
{
logger->Log( "MyPlugin Ctor()" );
frameWork->RegisterInterface( "ICustomerManager", dynamic_cast( &component1 ) );
frameWork->RegisterInterface( "IVendorManager", dynamic_cast( &component1 ) );
frameWork->RegisterInterface( "IAccountingManager", dynamic_cast( &webServer ) );
}
virtual void BindInterfaces( IFrameWork* frameWork ) {
logger->Log( "MyPlugin BindInterfaces()" );
IProductManager* productManager( static_cast( frameWork->GetInterface( "IProductManager" ) ) );
IShippingManager* shippingManager( static_cast( frameWork->GetInterface( "IShippingManager" ) ) );
component1.BindInterfaces( logger, productManager );
webServer.BindInterfaces( logger, productManager, shippingManager );
}
virtual void Start() {
logger->Log( "MyPlugin Start()" );
webServer.Start();
}
virtual void Stop() {
logger->Log( "MyPlugin Stop()" );
webServer.Stop();
}
};
class FrameWork :public IFrameWork {
vector plugIns;
map interfaces;
public:
virtual void RegisterInterface( const char* name, void* itfc ) {
interfaces[ name ] = itfc;
}
virtual void* GetInterface( const char* name ) {
return interfaces[ name ];
}
FrameWork() {
//Only interfaces in 'SystemPlugin' can be used by all methods of the other plugins
plugIns.push_back( new SystemPlugin( this ) );
plugIns.push_back( new SamplePlugin( this ) );
//add other plugIns here
for_each( plugIns.begin(), plugIns.end(), bind2nd( mem_fun( &IPlugIn::BindInterfaces ), this ) );
for_each( plugIns.begin(), plugIns.end(), mem_fun( &IPlugIn::Start ) );
}
~FrameWork() {
for_each( plugIns.rbegin(), plugIns.rend(), mem_fun( &IPlugIn::Stop ) );
for_each( plugIns.rbegin(), plugIns.rend(), Delete() );
}
};
Here's a minimal factory pattern implementation that I came up with in about 15 minutes. We use a similar one that uses more advanced base classes.
#include "stdafx.h"
#include <map>
#include <string>
class BaseClass
{
public:
virtual ~BaseClass() { }
virtual void Test() = 0;
};
class DerivedClass1 : public BaseClass
{
public:
virtual void Test() { } // You can put a breakpoint here to test.
};
class DerivedClass2 : public BaseClass
{
public:
virtual void Test() { } // You can put a breakpoint here to test.
};
class IFactory
{
public:
virtual BaseClass* CreateNew() const = 0;
};
template <typename T>
class Factory : public IFactory
{
public:
T* CreateNew() const { return new T(); }
};
class FactorySystem
{
private:
typedef std::map<std::wstring, IFactory*> FactoryMap;
FactoryMap m_factories;
public:
~FactorySystem()
{
FactoryMap::const_iterator map_item = m_factories.begin();
for (; map_item != m_factories.end(); ++map_item) delete map_item->second;
m_factories.clear();
}
template <typename T>
void AddFactory(const std::wstring& name)
{
delete m_factories[name]; // Delete previous one, if it exists.
m_factories[name] = new Factory<T>();
}
BaseClass* CreateNew(const std::wstring& name) const
{
FactoryMap::const_iterator found = m_factories.find(name);
if (found != m_factories.end())
return found->second->CreateNew();
else
return NULL; // or throw an exception, depending on how you want to handle it.
}
};
int _tmain(int argc, _TCHAR* argv[])
{
FactorySystem system;
system.AddFactory<DerivedClass1>(L"derived1");
system.AddFactory<DerivedClass2>(L"derived2");
BaseClass* b1 = system.CreateNew(L"derived1");
b1->Test();
delete b1;
BaseClass* b2 = system.CreateNew(L"derived2");
b2->Test();
delete b2;
return 0;
}
Just copy & paste over an initial Win32 console app in VS2005/2008. I like to point out something:
You don't need to create a concrete factory for every class. A template will do that for you.
I like to place the entire factory pattern in its own class, so that you don't need to worry about creating factory objects and deleting them. You simply register your classes, a factory class gets created by the compiler and a factory object gets created by the pattern. At the end of its lifetime, all factories are cleanly destroyed. I like this form of encapsulation, as there is no confusion over who governs the lifetime of the factories.