I am running a c1.medium machine. Once in a while, the machine becomes unresponsive. Is there a way to detect this?
My initial solution was to write a simple script which pings this machine every hour. But, this failed because, it was able to ping, yet was unresponsive(really weird!).
Is there a better way to monitor this?
then you have to define what unresponsive means. If unresponsive on http port(80) you can probe that specific port - the instance might be up but the process dead.
Related
Hi a quick question using the ec2 serial console...
I've currently migrating an EBS volume to an another EBS volume of different size.
I'm using the ec2 serial console on the browser to do this, and moving the data from the original EBS volume to the new one seems to take quite a while.
I was wondering if somehow I loose connection to the internet or turn off my browser, would it terminate the process that was running on the ec2 serial console?
Or would it be just running in the background and continue showing the background once I regain the connection? I know this is something that I could try out for myself but I really running out of time and can't afford to start migration from the beginning again. Help would be super great! Thanks in advance
It will terminate the program when you loose connection. To protect against that, usually people use a terminal multiplexes, such as tmux.
This way you run your commands in tmux and it will continue the execution of you programs due to any disconnections.
I am working on a new Amazon Redshift database that I recently started.
I am experiencing an issue where after I connect to the database, I can run queries without any issue. However, if I spend some time without running anything (like, 5 minutes), when I try running another query or command, ir never finishes.
I am using dBeaver Community 21.2.2 to interact with the connection, and it stays "Executing query" forever. The only way i can get it to work is by cancelling, disconnecting from the redshift, connecting again and then it executes correctly. Until I stop using for some minutes, and then it's happens all over again.
I tought this was a dBeaver issue, as we have a Meabase connected to this same cluster without any issues. But today, I tried manipulating this cluster with R using RJDBC, and the same thing happens: I can run queries, until I stop, and then when I try running something else it never stops, until I disconnect and connect again.
I'm sorry if I wasn't able to explain it clearly, I tried searching for simmilar issues but couldn't.
I suspect that the queries in question are not even being launched on the database. You can check this by reviewing svl_statementtext to see if the query is even being seen. Put a unique comment in the query to help determine if it is actually the query in question.
Since I've seen similar behavior before I'll write up a possible way this can happen. In this case the queries were not being seen by the database or the connection to the database was being dropped mid execution. The cause is network switches and their configurations.
Typical network connections are fairly quick - you ask for a web page and it is given to you. Connection is complete. When you click on a link a new connection is established and also end quickly. These network actions are atomic from a network connection point of view. However, database connections are different. One connection is made and many back and forth transmissions of data happen while the connection is open. No problem and with the right set of network configurations these connections can be open and idle for days.
The problem come in when the operators of the network equipment decide that connections that have no data flowing are "stale" after some fixed amount of time. They do this so that the network equipment can "forget" about these connections and focus on "active" connections. ISPs drop idle connections a lot so that they can handle the load of traffic and connections that flow through their equipment. This doesn't cause any issues for web pages and APIs but database connections get clobbered.
When this happens is look exactly like what you describe. Both sides (client and database) think that the connection is still active but the network equipment has dropped the connection. Nothing gets through but no notification is sent either party. You will likely see corresponding open sessions on the Redshift side for these dropped connections and the database is just waiting for the client to give a command on each of them. An administrator will need to go through and close (terminate) these sessions for them to go away.
Now the thing that doesn't align with experience is the speed at which these connections are being marked as "stale". In my case my ISP was closing connections that were idle for more than 30 min. You seem to be timing out much faster than this. In some cases corporate firewalls will be configured with short idle connection timeouts for routes out of the private network to the internet. So there are cases where the timeouts can be short. The networks at AWS do not have these timeouts so if your connections are completely within AWS then this isn't your answer.
To address this there are a few ways to go. The easy way is to set up a tunnel into AWS with "keep alive" packets sent every 30 sec or so. You will need an ec2 instance at AWS so it isn't cost free. Ssh tunneling is the usual tool for this and there are write-ups online for setting it up.
The hard way (but likely most correct way) is to work with network experts to understand when the timeout is happening and why. If the timeout cannot be changed then it may be possible to configure a different network topology for your use case. Network peering or VPN could address.
In some cases you may be able to not have jdbc or odbc connections at all. You see these protocols are valid but they are old and most networking doesn't work this way anymore which is why they suffer from these issues. Redshift Data API let's you issue SQL to redshift in a single package and check on completion later on. These API calls are each independent connections so there is no possibility of "timing out" between them. The downside is this process is not interactive and therefore not supported by workbenches.
So does this match what you have going on?
I am running a python Django app on an AWS EC2 instance. It uses gunicorn and nginx to serve the app, the EC2 is behind an application load balancer. Occasionally I get 504 error where the entire EC2 instance becomes unreachable for everyone (including via SSH which I use all the time otherwise). I then need to restart everything which takes time.
I can replicate the error by overloading the app (e.g. uploading and processing a very large image), in that case, gunicorn worker times out (I see the timeout message in logs), 504 error appears and the instance becomes unreachable. I set my gunicorn to time out in 5 minutes (300 seconds) but it falls down quicker than that. There is nothing really useful in CloudWatch logs.
I am looking for ways to resolve this for all current and future cases. I.e., I want to have the situation where, if the site gets overloaded, it returns an error message as opposed to becoming completely unreachable for everyone. Is there a way to do that?
There are many things to consider and test here in order to get what is a reason for this, but I think it is OOM(out of memory) mainly because you have to restart even to login in SSH.
Nginx uses "event‑driven" approach to handle requests so a single worker of nginx can handle 1000s of req simultaneously. But Gunicorn on the other hand mostly(by default) uses sync worker which means a request will remain with a worker till it is processed.
When you put a large request your machine tries to process that request until an overflow occurs, mostly it will not get detected by any service running inside a machine. Just try to monitor memory by any monitoring tool in AWS or just SSH and use htop before calling the API.
In most cases with Django/gunicorn the culprit is oom.
Edit:
AFAIK You cannot capture(cache) an oom, the only thing you can do is aftermath i.e after system restart sees/var/logs/syslogs ... As I said monitor in AWS memory monitor(I don't have much experience with AWS).
And regarding the solution,
you first increase the memory of your EC2 until you don't get an error to see how big the problem is.
Then you optimise your application by profiling which part is actually taking this much memory. I haven't used any memory profiling so maybe you can tell me after which is better.
The only thing you can do is optimise your application see common gotchas, best practices, Query optimisations etc.
https://haydenjames.io/how-to-diagnose-oom-errors-on-linux-systems/
https://www.pluralsight.com/blog/tutorials/how-to-profile-memory-usage-in-python
Is there a way to determine through a command line interface or other trick if an AWS EC2 instance is ready to receive ssh connections?
The running state seems not to be enough. Trying to connect in in the first minutes of the running state, the machine Status checks still shows initialising and ssh times out while trying to connect.
(I am using the awscli pip package.)
Running is similar to turning a computer on and finishing a bios check. As far as the hypervisor is concerned your instance is on.
The best way to know when your instance is ready, is to run a script at the end of startup (or when certain services are on) that will report its status to some other listener. Using that data, or event, you should know that your instance is ready to be connected to. This is purposely vague since there are so many different ways this can be accomplished.
You could also time the expected startup time, and try to connect after that and retry the connection if it fails. Still need a point at which you would stop trying as instances can fail to launch in some cases.
To begin, I am running a Wordpress site on an AWS EC2 Ubuntu Micro instance. I have already confirmed that this is NOT an error with Wordpress/mysql.
Seemingly at random the site will go down and I'll get the "Error establishing database connection" message. The server says that it is running just fine, and rebooting usually fixes the issue, however I'd like to figure out the cause and resolve the issue so this can stop happening (it's been the past 2 weeks now that it goes down almost every other day.)
It's not a spike in traffic, or at least Google Analytics hasn't shown the site as having any spikes in traffic (it averages about 300 visits per day.)
What's the cause, and how can this be fixed?
Sounds like you might be running into the throttling that is a limitation on t1.micro. If you use too much CPU cycles you will be throttled.
See http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/concepts_micro_instances.html#available-cpu-resources-during-spikes
The next time this happens I would check some general stats on the health of the instance. You can get a feel for the high-level health of the instance using the 'top' command (http://linuxaria.com/howto/understanding-the-top-command-on-linux?lang=en). Be sure to look for CPU and memory usage. You may find a process (pid) that is consuming a lot of resources and starving your app.
More likely, something within your application (how did you come to the conclusion that this is not a Wordpress/MySQL issue?) is going out of control. Possibly there is a database connection not being released? To see what your app is doing, find the process id (pid) for your app:
ps aux | grep "php"
and get a thread dump for that process: kill -3 to get java thread dump. This will help you see where your application's threads are stuck (if they are).
Typically it's good practice to execute two thread dumps a few seconds apart and compare trends in both. If there is an issue in the application, you should see a lot of threads stuck at the same point.
You might also want to checkout what MySQL is seeing (https://dev.mysql.com/doc/refman/5.1/en/show-processlist.html).
mysql> SHOW FULL PROCESSLIST
Hope this helps, let us know what you find!