I have one HICON which I want to use as an overlay on another HICON, to create a result HICON. The result HICON will then be used in an "owner draw" control (note: it doesn't use imagelists). The overlay icon has transparency color RGB(0, 255, 0).
How do I go about doing this in Native C++ (I've only found sources that show how to do this with managed code).
I generally agree with peterchen's answer, with some notes:
There's no reason to work with DIBs (unless you're synthesizing the image directly by altering its bits, rather than drawing using GDI functions).
You should keep in mind that GetIconInfo actually creates copies of the icon't bitmaps within your process. It's your responsibility to delete them when no more needed.
Unless you're going to pass the resulting HICON to either standard control or another process - there's just no need to create such. Instead it's better to work with a bitmap (and, possibly, mask).
It's important to understand the difference between icon and bitmap.
Bitmap is a GDI object. It's valid within your process.
Icon is a User object, and its scope is not limited to your process. It wraps a bitmap and, optionally, a mask.
There're several icon types:
The simplest, consisting of a single bitmap, which is drawn as-is.
Bitmap + mask, the mask marks solid/transparent pixels
32-bit bitmap, with alpha channel
Monochrome bitmap + mask. The bitmap + mask define the so-called AND-XOR operation (that is performed on the target surface).
So that after you get the contents of the icon (by GetIconInfo) you should discover the actual icon type, because each of those options requires different handling.
(1) overlay Icons
In many places of the windows API, there are overlay icons supported (e.g. ListView, and TreeView with help ofthe ImageList, also in the shell)
(2) As Hans says
The most straigtforward way would be to
create a memory DC on a bitmap
Draw the two icons on top of each other
create an icon from the bitmap
(3) if you insist
If you insist in doing it manually (though i see no reason to):
GetIconInfoto get the underlying bitmaps. Note that b&w icons need special treatment
GetObjectthe get the BITMAP for a HBITMAP. if you don't also insist on handling various bitmap formats, you should covnert them into DIB sections.
Do your magic
Related
I've been trying to code an auto clicker for a simple game online (a php coded one), but I've had trouble analyzing the colors on-screen. (English isn't my first language, sorry!) I've already done a bit of C++ in university, but only for science-oriented simple console programs. (Edit: I'm working on windows!! forgot to mention)
I've already tried the getpixel function, but since my chrome window is zoomed out at 80% to get the full game in frame, it seems I'm having some DPI related issues, but looking into this made my head dizzy.
After watching a Codebullet video, I thought a better approach to this would be to take a screenshot of the problematic area, analyze it to see if the condition is filled, then delete the screenshot. The problem is, I have no idea how I could achieve this and Google didn't help much this time :\
My code is extremely messy so I can't show it right now, but it's basically just a:
-click there
-click there after 5 seconds
-click there if this pixel is this color
-repeat
Is there an easy answer to this? I'd be really thankful if there is. Have a nice day! :)
You don't need to save the screen shot if you don't want to:
Pass the target window handle to GetDC(), t will return the the device context of the window.
Pass the device context to CreateCompatibleDC() to create a compatible DC.
Use CreateCompatibleBitmap(), passing in the DC and the size of the window. This returns a handle to a bitmap
Use SelectObject() to select the bitmap
Use BitBlt() to do a bitblock transfer of the selected pixels from the regular DC into the compatible DC using the SRCCOPY raster operation code to do a normal copy.
Create a BITMAP object. Use GetObject() and pass the handle to the bitmap you created.
Create a BITMAPINFOHEADER and define the member vars. Create an array of unsigned chars big enough to fit all the pixels from your bitmap.
Use GetDIBits() passing in the handle to the compatible bitmap, the bitmap header and a pointer to the pixel array. This loads the pixels from the bitmap into the pixel array.
Now parse all that juicy pixel data, search for the colors you're looking for and test the results against your conditionals to decide what to do next.
Don't forget to delete objects and release memory & device contexts.
I believe this is the tutorial I followed where I learned this, courtesy of MSDN: https://learn.microsoft.com/en-us/windows/desktop/gdi/capturing-an-image
I'm trying to create a bitmap that I can change the pixels of and then update the window with that bitmap. I've tried to research a way to just create a bitmap, but that was to no avail.
I need to know how to create a blank bitmap, then change its pixels using x and y coordinates and a color, and then how to draw it to the window. I don't need to save it to the computer and I don't want to convert an existing image into a bitmap.
I'm on windows and using Visual Studio with C++
Just to specify, I need to know the syntax for creating a blank bitmap with a certain width and height, and also what function I need to use to change the pixels' colors, and then how to draw a bitmap to the window. Thank you.
There is a free library ImgSource that you can use which has a huge amount of functionality for images.
http://www.smalleranimals.com/isource.htm
It is available in MSDN, but using a library like ImgSource may be to your advantage.
It provides simple methods for rendering your image onto a device context. And there is a good support forum.
In a MFC SDI application containing a single CView, I pass the output device context pDC->m_hDC to a mapping library to render the map within the CMyView::OnDraw() method.
I would like the rendered image to appear in the centre of the cview surrounded by a black background, i.e. the image size would be smaller than the CView client rect size. I have experimented with CDC::SetViewportOrg() and set the device size in the mapping library, however unfortunately the mapping library draws outside of the device size set.
What is the best way of limiting the image to the desired size? Should I be looking at clipping functions? Or do I have to manually draw over the undesired parts of the image.
Well you can do it 2 ways.
1) You could SetBoundsRect to the boundaries you want.
2) You could just bit blt the section of the image you want into the DC.
Method 2 would be my preferred method as there is no extra logic. It only ever even tries to draw the part you are blitting :)
I have a drawing function that just takes an HDC.
But I need to show an EXACT scaled version of what will print.
So currently, I use
CreateCompatibleDC() with a printer HDC and
CreateCompatibleBitmap() with the printer's HDC.
I figure this way the DC will have the printer's exact width and height.
And when I select fonts into this HDC, the text will be scaled exactly as the printer would.
Unfortunately, I can't to a StretchBlt() to copy this HDC's pixels to the control's HDC since they're of different HDC types I guess.
If I create the "memory canvas" from a window HDC with same w,h as the printer's page,
the fonts come out WAY teeny since they're scaled for the screen, not page...
Should I CreateCompatibleDC() from the window's DC and
CreateCompatibleBitmap() from the printer's DC or something??
If somebody could explain the RIGHT way to do this.
(And still have something that looks EXACTLY as it would on printer)...
Well, I'd appreciate it !!
...Steve
Depending on how accurate you want to be, this can get difficult.
There are many approaches. It sounds like you're trying to draw to a printer-sized bitmap and then shrink it down. The steps to do that are:
Create a DC (or better yet, an IC--Information Context) for the printer.
Query the printer DC to find out the resolution, page size, physical offsets, etc.
Create a DC for the window/screen.
Create a compatible DC (the memory DC).
Create a compatible bitmap for the window/screen, but the size should be the pixel size of the printer page. (The problem with this approach is that this is a HUGE bitmap and it can fail.)
Select the compatible bitmap into the memory DC.
Draw to the memory DC, using the same coordinates you would use if drawing to the actual printer. (When you select fonts, make sure you scale them to the printer's logical inch, not the screen's logical inch.)
StretchBlt the memory DC to the window, which will scale down the entire image. You might want to experiment with the stretch mode to see what works best for the kind of image you're going to display.
Release all the resources.
But before you head in that direction, consider the alternatives. This approach involves allocating a HUGE off-screen bitmap. This can fail on resource-poor computers. Even if it doesn't, you might be starving other apps.
The metafile approach given in another answer is a good choice for many applications. I'd start with this.
Another approach is to figure out all the sizes in some fictional high-resolution unit. For example, assume everything is in 1000ths of an inch. Then your drawing routines would scale this imaginary unit to the actual dpi used by the target device.
The problem with this last approach (and possibly the metafile one) is that GDI fonts don't scale perfectly linearly. The widths of individual characters are tweaked depending on the target resolution. On a high-resolution device (like a 300+ dpi laser printer), this tweaking is minimal. But on a 96-dpi screen, the tweaks can add up to a significant error over the length of a line. So text in your preview window might appear out-of-proportion (typically wider) than it does on the printed page.
Thus the hardcore approach is to measure text in the printer context, and measure again in the screen context, and adjust for the discrepancy. For example (using made-up numbers), you might measure the width of some text in the printer context, and it comes out to 900 printer pixels. Suppose the ratio of printer pixels to screen pixels is 3:1. You'd expect the same text on the screen to be 300 screen pixels wide. But you measure in the screen context and you get a value like 325 screen pixels. When you draw to the screen, you'll have to somehow make the text 25 pixels narrower. You can ram the characters closer together, or choose a slightly smaller font and then stretch them out.
The hardcore approach involves more complexity. You might, for example, try to detect font substitutions made by the printer driver and match them as closely as you can with the available screen fonts.
I've had good luck with a hybrid of the big-bitmap and the hardcore approaches. Instead of making a giant bitmap for the whole page, I make one large enough for a line of text. Then I draw at printer size to the offscreen bitmap and StretchBlt it down to screen size. This eliminates dealing with the size discrepancy at a slight degradation of font quality. It's suitable for actual print preview, but you wouldn't want to build a WYSIWYG editor like that. The one-line bitmap is small enough to make this practical.
The good news is only text is hard. All other drawing is a simple scaling of coordinates and sizes.
I've not used GDI+ much, but I think it did away with non-linear font scaling. So if you're using GDI+, you should just have to scale your coordinates. The drawback is that I don't think the font quality on GDI+ is as good.
And finally, if you're a native app on Vista or later, make sure you've marked your process as "DPI-aware" . Otherwise, if the user is on a high-DPI screen, Windows will lie to you and claim that the resolution is only 96 dpi and then do a fuzzy up-scaling of whatever you draw. This degrades the visual quality and can make debugging your print preview even more complicated. Since so many programs don't adapt well to higher DPI screens, Microsoft added "high DPI scaling" by default starting in Vista.
Edited to Add
Another caveat: If you select an HFONT into the memory DC with the printer-sized bitmap, it's possible that you get a different font than what would get when selecting that same HFONT into the actual printer DC. That's because some printer drivers will substitute common fonts with in memory ones. For example, some PostScript printers will substitute an internal PostScript font for certain common TrueType fonts.
You can first select the HFONT into the printer IC, then use GDI functions like GetTextFace, GetTextMetrics, and maybe GetOutlineTextMetrics to find out about the actual font selected. Then you can create a new LOGFONT to try to more closely match what the printer would use, turn that into an HFONT, and select that into your memory DC. This is the mark of a really good implementation.
Another Edit
I've recently written new code that uses enhanced meta files, and that works really well, at least for TrueType and OpenType fonts when there's no font substitution. This eliminates all the work I described above trying to create a screen font that is a scaled match for the printer font. You can just run through your normal printing code and print to an enhanced meta file DC as though it's the printer DC.
One thing that might be worth trying is to create an enhanced metafile DC, draw to it as normal and then scale this metafile using printer metrics. This is the approach used by the WTL BmpView sample - I don't know how accurate this will be but it might be worth looking at (it should be easy to port the relevant classes to Win32 but WTL is a great replacement for Win32 programming so might be worth utilizing.)
Well it won't look the same because you have a higher resolution in the printer DC, so you'll have to write a conversion function of sorts. I'd go with the method that you got to work but the text was too small and just multiply every position/font size by the printer window width and divide by the source window width.
I'm creating a non-intrusive popup window to notify the user when processing a time-consuming operation. At the moment I'm setting its transparency by calling SetLayeredWindowAttributes which gives me a reasonable result:
alt text http://img6.imageshack.us/img6/3144/transparentn.jpg
However I'd like the text and close button to appear opaque (it doesn't quite look right with white text) while keeping the background transparent - is there a way of doing this?
In order to do "proper" alpha in a layered window you need to supply the window manager with a PARGB bitmap by a call to UpdateLayeredWindow.
The cleanest way to achieve this that I know of is the following:
Create a GDI+ Bitmap object with the PixelFormat32bppPARGB pixel format.
Create a Graphics object to draw in this Bitmap object.
Do all your drawing into this object using GDI+.
Destroy the Graphics object created in step 2.
Call the GetHBITMAP method on the Bitmap object to get a Windows HBITMAP.
Destroy the Bitmap object.
Create a memory DC using CreateCompatibleDC and select the HBITMAP from step 5 into it.
Call UpdateLayeredWindow using the memory DC as a source.
Select previous bitmap and delete the memory DC.
Destroy the HBITMAP created in step 5.
This method should allow you to control the alpha channel of everything that is drawn: transparent for the background, opaque for the text and button.
Also, since you are going to be outputting text, I recommend that you call SystemParametersInfo to get the default antialiasing setting (SPI_GETFONTSMOOTHING), and then the SetTextRenderingHint on the Graphics object to set the antialiasing type to the same type that is configured by the user, for a nicer look.
I suspect you'll need two top level windows rather than one - one that has the alpha blend and a second that is display above the first with the opaque text and button but with a transparent background. To accomplish this with a single window you'll need to use the UpdateLayeredWindow API call, but using this will cause your buttons to not redraw when they are interacted with (hover highlights, focus etc.)
It is possible that if this application is for Vista only there is a new API call that you can use, but I do not believe it is available in XP or earlier.
I can't say for sure, you'll need to try it, but since everything is a window, you could try setting the layered attributes for your button to make it opaque.
As for the text, you may be able to put that in its own frame with a set background and foreground color, and modify its layered attributes to make the background color transparent...
But since these are child windows and not the top-level window, I really don't know that it'll work.