I'm using Linux redhat 3, can someone explain how is that possible that i am able to analyze
with gdb , a core dump generated in Linux redhat 5 ?
not that i complaint :) but i need to be sure this will always work... ?
EDIT: the shared libraries are the same version, so no worries about that, they are placed in a shaerd storage so it can be accessed from both linux 5 and linux 3.
thanks.
You can try following commands of GDB to open a core file
gdb
(gdb) exec-file <executable address>
(gdb) set solib-absolute-prefix <path to shared library>
(gdb) core-file <path to core file>
The reason why you can't rely on it is because every process used libc or system shared library,which will definitely has changes from Red hat 3 to red hat 5.So all the instruction address and number of instruction in native function will be diff,and there where debugger gets goofed up,and possibly can show you wrong data to analyze. So its always good to analyze the core on the same platform or if you can copy all the required shared library to other machine and set the path through set solib-absolute-prefix.
In my experience analysing core file, generated on other system, do not work, because standard library (and other libraries your program probably use) typically will be different, so addresses of the functions are different, so you cannot even get a sensible backtrace.
Don't do it, because even if it works sometimes, you cannot rely on it.
You can always run gdb -c /path/to/corefile /path/to/program_that_crashed. However, if program_that_crashed has no debug infos (i.e. was not compiled and linked with the -g gcc/ld flag) the coredump is not that useful unless you're a hard-core debugging expert ;-)
Note that the generation of corefiles can be disabled (and it's very likely that it is disabled by default on most distros). See man ulimit. Call ulimit -c to see the limit of core files, "0" means disabled. Try ulimit -c unlimited in this case. If a size limit is imposed the coredump will not exceed the limit size, thus maybe cutting off valuable information.
Also, the path where a coredump is generated depends on /proc/sys/kernel/core_pattern. Use cat /proc/sys/kernel/core_pattern to query the current pattern. It's actually a path, and if it doesn't start with / then the file will be generated in the current working directory of the process. And if cat /proc/sys/kernel/core_uses_pid returns "1" then the coredump will have the file PID of the crashed process as file extension. You can also set both value, e.g. echo -n /tmp/core > /proc/sys/kernel/core_pattern will force all coredumps to be generated in /tmp.
I understand the question as:
how is it possible that I am able to
analyse a core that was produced under
one version of an OS under another
version of that OS?
Just because you are lucky (even that is questionable). There are a lot of things that can go wrong by trying to do so:
the tool chains gcc, gdb etc will
be of different versions
the shared libraries will be of
different versions
so no, you shouldn't rely on that.
You have asked similar question and accepted an answer, ofcourse by yourself here : Analyzing core file of shared object
Once you load the core file you can get the stack trace and get the last function call and check the code for the reason of crash.
There is a small tutorial here to get started with.
EDIT:
Assuming you want to know how to analyse core file using gdb on linux as your question is little unclear.
Related
We get core files from running our software on a Customer's box. Unfortunately because we've always compiled with -O2 without debugging symbols this has lead to situations where we could not figure out why it was crashing, we've modified the builds so now they generate -g and -O2 together. We then advice the Customer to run a -g binary so it becomes easier to debug.
I have a few questions:
What happens when a core file is generated from a Linux distro other than the one we are running in Dev? Is the stack trace even meaningful?
Are there any good books for debugging on Linux, or Solaris? Something example oriented would be great. I am looking for real-life examples of figuring out why a routine crashed and how the author arrived at a solution. Something more on the intermediate to advanced level would be good, as I have been doing this for a while now. Some assembly would be good as well.
Here's an example of a crash that requires us to tell the Customer to get a -g ver. of the binary:
Program terminated with signal 11, Segmentation fault.
#0 0xffffe410 in __kernel_vsyscall ()
(gdb) where
#0 0xffffe410 in __kernel_vsyscall ()
#1 0x00454ff1 in select () from /lib/libc.so.6
...
<omitted frames>
Ideally I'd like to solve find out why exactly the app crashed - I suspect it's memory corruption but I am not 100% sure.
Remote debugging is strictly not allowed.
Thanks
What happens when a core file is generated from a Linux distro other than the one we are running in Dev? Is the stack trace even meaningful?
It the executable is dynamically linked, as yours is, the stack GDB produces will (most likely) not be meaningful.
The reason: GDB knows that your executable crashed by calling something in libc.so.6 at address 0x00454ff1, but it doesn't know what code was at that address. So it looks into your copy of libc.so.6 and discovers that this is in select, so it prints that.
But the chances that 0x00454ff1 is also in select in your customers copy of libc.so.6 are quite small. Most likely the customer had some other procedure at that address, perhaps abort.
You can use disas select, and observe that 0x00454ff1 is either in the middle of instruction, or that the previous instruction is not a CALL. If either of these holds, your stack trace is meaningless.
You can however help yourself: you just need to get a copy of all libraries that are listed in (gdb) info shared from the customer system. Have the customer tar them up with e.g.
cd /
tar cvzf to-you.tar.gz lib/libc.so.6 lib/ld-linux.so.2 ...
Then, on your system:
mkdir /tmp/from-customer
tar xzf to-you.tar.gz -C /tmp/from-customer
gdb /path/to/binary
(gdb) set solib-absolute-prefix /tmp/from-customer
(gdb) core core # Note: very important to set solib-... before loading core
(gdb) where # Get meaningful stack trace!
We then advice the Customer to run a -g binary so it becomes easier to debug.
A much better approach is:
build with -g -O2 -o myexe.dbg
strip -g myexe.dbg -o myexe
distribute myexe to customers
when a customer gets a core, use myexe.dbg to debug it
You'll have full symbolic info (file/line, local variables), without having to ship a special binary to the customer, and without revealing too many details about your sources.
You can indeed get useful information from a crash dump, even one from an optimized compile (although it's what is called, technically, "a major pain in the ass.") a -g compile is indeed better, and yes, you can do so even when the machine on which the dump happened is another distribution. Basically, with one caveat, all the important information is contained in the executable and ends up in the dump.
When you match the core file with the executable, the debugger will be able to tell you where the crash occurred and show you the stack. That in itself should help a lot. You should also find out as much as you can about the situation in which it happens -- can they reproduce it reliably? If so, can you reproduce it?
Now, here's the caveat: the place where the notion of "everything is there" breaks down is with shared object files, .so files. If it is failing because of a problem with those, you won't have the symbol tables you need; you may only be able to see what library .so it happens in.
There are a number of books about debugging, but I can't think of one I'd recommend.
As far as I remember, you dont need to ask your customer to run with the binary built with -g option. What is needed is that you should have a build with -g option. With that you can load the core file and it will show the whole stack trace. I remember few weeks ago, I created core files, with build (-g) and without -g and the size of core was same.
Inspect the values of local variables you see when you walk the stack ? Especially around the select() call. Do this on customer's box, just load the dump and walk the stack...
Also , check the value of FD_SETSIZE on both your DEV and PROD platforms !
Copying the resolution from my question which was considered a duplicate of this.
set solib-absolute-prefix from the accepted solution did not help for me. set sysroot was absolutely necessary to make gdb load locally provided libs.
Here is the list of commands I used to open core dump:
# note: all the .so files obtained from user machine must be put into local directory.
#
# most importantly, the following files are necessary:
# 1. libthread_db.so.1 and libpthread.so.0: required for thread debugging.
# 2. other .so files are required if they occur in call stack.
#
# these files must also be renamed exactly as the symlinks
# i.e. libpthread-2.28.so should be renamed to libpthread.so.0
# load executable file
file ./thedarkmod.x64
# force gdb to forget about local system!
# load all .so files using local directory as root
set sysroot .
# drop dump-recorded paths to .so files
# i.e. load ./libpthread.so.0 instead of ./lib/x86_64-linux-gnu/libpthread.so.0
set solib-search-path .
# disable damn security protection
set auto-load safe-path /
# load core dump file
core core.6487
# print stacktrace
bt
We get core files from running our software on a Customer's box. Unfortunately because we've always compiled with -O2 without debugging symbols this has lead to situations where we could not figure out why it was crashing, we've modified the builds so now they generate -g and -O2 together. We then advice the Customer to run a -g binary so it becomes easier to debug.
I have a few questions:
What happens when a core file is generated from a Linux distro other than the one we are running in Dev? Is the stack trace even meaningful?
Are there any good books for debugging on Linux, or Solaris? Something example oriented would be great. I am looking for real-life examples of figuring out why a routine crashed and how the author arrived at a solution. Something more on the intermediate to advanced level would be good, as I have been doing this for a while now. Some assembly would be good as well.
Here's an example of a crash that requires us to tell the Customer to get a -g ver. of the binary:
Program terminated with signal 11, Segmentation fault.
#0 0xffffe410 in __kernel_vsyscall ()
(gdb) where
#0 0xffffe410 in __kernel_vsyscall ()
#1 0x00454ff1 in select () from /lib/libc.so.6
...
<omitted frames>
Ideally I'd like to solve find out why exactly the app crashed - I suspect it's memory corruption but I am not 100% sure.
Remote debugging is strictly not allowed.
Thanks
What happens when a core file is generated from a Linux distro other than the one we are running in Dev? Is the stack trace even meaningful?
It the executable is dynamically linked, as yours is, the stack GDB produces will (most likely) not be meaningful.
The reason: GDB knows that your executable crashed by calling something in libc.so.6 at address 0x00454ff1, but it doesn't know what code was at that address. So it looks into your copy of libc.so.6 and discovers that this is in select, so it prints that.
But the chances that 0x00454ff1 is also in select in your customers copy of libc.so.6 are quite small. Most likely the customer had some other procedure at that address, perhaps abort.
You can use disas select, and observe that 0x00454ff1 is either in the middle of instruction, or that the previous instruction is not a CALL. If either of these holds, your stack trace is meaningless.
You can however help yourself: you just need to get a copy of all libraries that are listed in (gdb) info shared from the customer system. Have the customer tar them up with e.g.
cd /
tar cvzf to-you.tar.gz lib/libc.so.6 lib/ld-linux.so.2 ...
Then, on your system:
mkdir /tmp/from-customer
tar xzf to-you.tar.gz -C /tmp/from-customer
gdb /path/to/binary
(gdb) set solib-absolute-prefix /tmp/from-customer
(gdb) core core # Note: very important to set solib-... before loading core
(gdb) where # Get meaningful stack trace!
We then advice the Customer to run a -g binary so it becomes easier to debug.
A much better approach is:
build with -g -O2 -o myexe.dbg
strip -g myexe.dbg -o myexe
distribute myexe to customers
when a customer gets a core, use myexe.dbg to debug it
You'll have full symbolic info (file/line, local variables), without having to ship a special binary to the customer, and without revealing too many details about your sources.
You can indeed get useful information from a crash dump, even one from an optimized compile (although it's what is called, technically, "a major pain in the ass.") a -g compile is indeed better, and yes, you can do so even when the machine on which the dump happened is another distribution. Basically, with one caveat, all the important information is contained in the executable and ends up in the dump.
When you match the core file with the executable, the debugger will be able to tell you where the crash occurred and show you the stack. That in itself should help a lot. You should also find out as much as you can about the situation in which it happens -- can they reproduce it reliably? If so, can you reproduce it?
Now, here's the caveat: the place where the notion of "everything is there" breaks down is with shared object files, .so files. If it is failing because of a problem with those, you won't have the symbol tables you need; you may only be able to see what library .so it happens in.
There are a number of books about debugging, but I can't think of one I'd recommend.
As far as I remember, you dont need to ask your customer to run with the binary built with -g option. What is needed is that you should have a build with -g option. With that you can load the core file and it will show the whole stack trace. I remember few weeks ago, I created core files, with build (-g) and without -g and the size of core was same.
Inspect the values of local variables you see when you walk the stack ? Especially around the select() call. Do this on customer's box, just load the dump and walk the stack...
Also , check the value of FD_SETSIZE on both your DEV and PROD platforms !
Copying the resolution from my question which was considered a duplicate of this.
set solib-absolute-prefix from the accepted solution did not help for me. set sysroot was absolutely necessary to make gdb load locally provided libs.
Here is the list of commands I used to open core dump:
# note: all the .so files obtained from user machine must be put into local directory.
#
# most importantly, the following files are necessary:
# 1. libthread_db.so.1 and libpthread.so.0: required for thread debugging.
# 2. other .so files are required if they occur in call stack.
#
# these files must also be renamed exactly as the symlinks
# i.e. libpthread-2.28.so should be renamed to libpthread.so.0
# load executable file
file ./thedarkmod.x64
# force gdb to forget about local system!
# load all .so files using local directory as root
set sysroot .
# drop dump-recorded paths to .so files
# i.e. load ./libpthread.so.0 instead of ./lib/x86_64-linux-gnu/libpthread.so.0
set solib-search-path .
# disable damn security protection
set auto-load safe-path /
# load core dump file
core core.6487
# print stacktrace
bt
Main question:
In Ubuntu trying to debug an embedded application running in QNX, I am getting the following error message from gdb:
warning: Shared object "$SOLIB_PATH/libc.so.4" could not be validated and will be ignored.,
Q: What is the "validation" operation going on ?
After some research I found that the information reported by readelf -n libfoo.so contains a build-id and that this is compared against something and there could be a mismatch causing gdb to refuse to load the library. If that's the case what ELF file's build-id is the shared object's build-id compared against ? Can I find this information parsing the executable file ?
More context:
I have a .core file for this executable. I am using a version of gdb provided by QNX and making sure I use set sysroot and set solib-search-path to where I installed the QNX toolchain.
My full command to launch gdb in Ubuntu is :
$QNX_TOOLCHAIN_PATH/ntox86_64-gdb --init-eval-command 'set sysroot $SYSROOT_PATH' --init-eval-command 'set solib-search-path $SOLIB_PATH --init-eval-command 'python sys.path.append("/usr/share/gcc-8/python");' -c path-to-exe.core path-to-executable-bin
Gdb is complaining that it cannot load shared objects :
warning: Shared object "$SOLIB_PATH/libc.so.4" could not be validated and will be ignored.
The big thing here is to make sure you're using the exact same binary that is on the target (that the program runs over). This is often quite difficult with libc, especially because libc/ldqnx are sometimes "the same thing" and it confuses gdb.
The easiest way to do this is to log your mkifs output (on the linux host):
make 2>&1 | tee build-out.txt
and read through that, search for libc.so.4, and copy the binary that's being pulled onto the target into . (wherever you're running gdb) so you don't need to mess with SOLIB paths (the lazy solution).
Alternatively, scp/ftp a new libc (one that you want to use, and ideally one that you have associated symbols for) into /tmp and use LD_LIBRARY_PATH to pull that one (and DL_DEBUG=libs to confirm, if you need). Use that same libc to debug
source: I work at QNX and even we struggle with gdb + libc sometimes
We get core files from running our software on a Customer's box. Unfortunately because we've always compiled with -O2 without debugging symbols this has lead to situations where we could not figure out why it was crashing, we've modified the builds so now they generate -g and -O2 together. We then advice the Customer to run a -g binary so it becomes easier to debug.
I have a few questions:
What happens when a core file is generated from a Linux distro other than the one we are running in Dev? Is the stack trace even meaningful?
Are there any good books for debugging on Linux, or Solaris? Something example oriented would be great. I am looking for real-life examples of figuring out why a routine crashed and how the author arrived at a solution. Something more on the intermediate to advanced level would be good, as I have been doing this for a while now. Some assembly would be good as well.
Here's an example of a crash that requires us to tell the Customer to get a -g ver. of the binary:
Program terminated with signal 11, Segmentation fault.
#0 0xffffe410 in __kernel_vsyscall ()
(gdb) where
#0 0xffffe410 in __kernel_vsyscall ()
#1 0x00454ff1 in select () from /lib/libc.so.6
...
<omitted frames>
Ideally I'd like to solve find out why exactly the app crashed - I suspect it's memory corruption but I am not 100% sure.
Remote debugging is strictly not allowed.
Thanks
What happens when a core file is generated from a Linux distro other than the one we are running in Dev? Is the stack trace even meaningful?
It the executable is dynamically linked, as yours is, the stack GDB produces will (most likely) not be meaningful.
The reason: GDB knows that your executable crashed by calling something in libc.so.6 at address 0x00454ff1, but it doesn't know what code was at that address. So it looks into your copy of libc.so.6 and discovers that this is in select, so it prints that.
But the chances that 0x00454ff1 is also in select in your customers copy of libc.so.6 are quite small. Most likely the customer had some other procedure at that address, perhaps abort.
You can use disas select, and observe that 0x00454ff1 is either in the middle of instruction, or that the previous instruction is not a CALL. If either of these holds, your stack trace is meaningless.
You can however help yourself: you just need to get a copy of all libraries that are listed in (gdb) info shared from the customer system. Have the customer tar them up with e.g.
cd /
tar cvzf to-you.tar.gz lib/libc.so.6 lib/ld-linux.so.2 ...
Then, on your system:
mkdir /tmp/from-customer
tar xzf to-you.tar.gz -C /tmp/from-customer
gdb /path/to/binary
(gdb) set solib-absolute-prefix /tmp/from-customer
(gdb) core core # Note: very important to set solib-... before loading core
(gdb) where # Get meaningful stack trace!
We then advice the Customer to run a -g binary so it becomes easier to debug.
A much better approach is:
build with -g -O2 -o myexe.dbg
strip -g myexe.dbg -o myexe
distribute myexe to customers
when a customer gets a core, use myexe.dbg to debug it
You'll have full symbolic info (file/line, local variables), without having to ship a special binary to the customer, and without revealing too many details about your sources.
You can indeed get useful information from a crash dump, even one from an optimized compile (although it's what is called, technically, "a major pain in the ass.") a -g compile is indeed better, and yes, you can do so even when the machine on which the dump happened is another distribution. Basically, with one caveat, all the important information is contained in the executable and ends up in the dump.
When you match the core file with the executable, the debugger will be able to tell you where the crash occurred and show you the stack. That in itself should help a lot. You should also find out as much as you can about the situation in which it happens -- can they reproduce it reliably? If so, can you reproduce it?
Now, here's the caveat: the place where the notion of "everything is there" breaks down is with shared object files, .so files. If it is failing because of a problem with those, you won't have the symbol tables you need; you may only be able to see what library .so it happens in.
There are a number of books about debugging, but I can't think of one I'd recommend.
As far as I remember, you dont need to ask your customer to run with the binary built with -g option. What is needed is that you should have a build with -g option. With that you can load the core file and it will show the whole stack trace. I remember few weeks ago, I created core files, with build (-g) and without -g and the size of core was same.
Inspect the values of local variables you see when you walk the stack ? Especially around the select() call. Do this on customer's box, just load the dump and walk the stack...
Also , check the value of FD_SETSIZE on both your DEV and PROD platforms !
Copying the resolution from my question which was considered a duplicate of this.
set solib-absolute-prefix from the accepted solution did not help for me. set sysroot was absolutely necessary to make gdb load locally provided libs.
Here is the list of commands I used to open core dump:
# note: all the .so files obtained from user machine must be put into local directory.
#
# most importantly, the following files are necessary:
# 1. libthread_db.so.1 and libpthread.so.0: required for thread debugging.
# 2. other .so files are required if they occur in call stack.
#
# these files must also be renamed exactly as the symlinks
# i.e. libpthread-2.28.so should be renamed to libpthread.so.0
# load executable file
file ./thedarkmod.x64
# force gdb to forget about local system!
# load all .so files using local directory as root
set sysroot .
# drop dump-recorded paths to .so files
# i.e. load ./libpthread.so.0 instead of ./lib/x86_64-linux-gnu/libpthread.so.0
set solib-search-path .
# disable damn security protection
set auto-load safe-path /
# load core dump file
core core.6487
# print stacktrace
bt
We get core files from running our software on a Customer's box. Unfortunately because we've always compiled with -O2 without debugging symbols this has lead to situations where we could not figure out why it was crashing, we've modified the builds so now they generate -g and -O2 together. We then advice the Customer to run a -g binary so it becomes easier to debug.
I have a few questions:
What happens when a core file is generated from a Linux distro other than the one we are running in Dev? Is the stack trace even meaningful?
Are there any good books for debugging on Linux, or Solaris? Something example oriented would be great. I am looking for real-life examples of figuring out why a routine crashed and how the author arrived at a solution. Something more on the intermediate to advanced level would be good, as I have been doing this for a while now. Some assembly would be good as well.
Here's an example of a crash that requires us to tell the Customer to get a -g ver. of the binary:
Program terminated with signal 11, Segmentation fault.
#0 0xffffe410 in __kernel_vsyscall ()
(gdb) where
#0 0xffffe410 in __kernel_vsyscall ()
#1 0x00454ff1 in select () from /lib/libc.so.6
...
<omitted frames>
Ideally I'd like to solve find out why exactly the app crashed - I suspect it's memory corruption but I am not 100% sure.
Remote debugging is strictly not allowed.
Thanks
What happens when a core file is generated from a Linux distro other than the one we are running in Dev? Is the stack trace even meaningful?
It the executable is dynamically linked, as yours is, the stack GDB produces will (most likely) not be meaningful.
The reason: GDB knows that your executable crashed by calling something in libc.so.6 at address 0x00454ff1, but it doesn't know what code was at that address. So it looks into your copy of libc.so.6 and discovers that this is in select, so it prints that.
But the chances that 0x00454ff1 is also in select in your customers copy of libc.so.6 are quite small. Most likely the customer had some other procedure at that address, perhaps abort.
You can use disas select, and observe that 0x00454ff1 is either in the middle of instruction, or that the previous instruction is not a CALL. If either of these holds, your stack trace is meaningless.
You can however help yourself: you just need to get a copy of all libraries that are listed in (gdb) info shared from the customer system. Have the customer tar them up with e.g.
cd /
tar cvzf to-you.tar.gz lib/libc.so.6 lib/ld-linux.so.2 ...
Then, on your system:
mkdir /tmp/from-customer
tar xzf to-you.tar.gz -C /tmp/from-customer
gdb /path/to/binary
(gdb) set solib-absolute-prefix /tmp/from-customer
(gdb) core core # Note: very important to set solib-... before loading core
(gdb) where # Get meaningful stack trace!
We then advice the Customer to run a -g binary so it becomes easier to debug.
A much better approach is:
build with -g -O2 -o myexe.dbg
strip -g myexe.dbg -o myexe
distribute myexe to customers
when a customer gets a core, use myexe.dbg to debug it
You'll have full symbolic info (file/line, local variables), without having to ship a special binary to the customer, and without revealing too many details about your sources.
You can indeed get useful information from a crash dump, even one from an optimized compile (although it's what is called, technically, "a major pain in the ass.") a -g compile is indeed better, and yes, you can do so even when the machine on which the dump happened is another distribution. Basically, with one caveat, all the important information is contained in the executable and ends up in the dump.
When you match the core file with the executable, the debugger will be able to tell you where the crash occurred and show you the stack. That in itself should help a lot. You should also find out as much as you can about the situation in which it happens -- can they reproduce it reliably? If so, can you reproduce it?
Now, here's the caveat: the place where the notion of "everything is there" breaks down is with shared object files, .so files. If it is failing because of a problem with those, you won't have the symbol tables you need; you may only be able to see what library .so it happens in.
There are a number of books about debugging, but I can't think of one I'd recommend.
As far as I remember, you dont need to ask your customer to run with the binary built with -g option. What is needed is that you should have a build with -g option. With that you can load the core file and it will show the whole stack trace. I remember few weeks ago, I created core files, with build (-g) and without -g and the size of core was same.
Inspect the values of local variables you see when you walk the stack ? Especially around the select() call. Do this on customer's box, just load the dump and walk the stack...
Also , check the value of FD_SETSIZE on both your DEV and PROD platforms !
Copying the resolution from my question which was considered a duplicate of this.
set solib-absolute-prefix from the accepted solution did not help for me. set sysroot was absolutely necessary to make gdb load locally provided libs.
Here is the list of commands I used to open core dump:
# note: all the .so files obtained from user machine must be put into local directory.
#
# most importantly, the following files are necessary:
# 1. libthread_db.so.1 and libpthread.so.0: required for thread debugging.
# 2. other .so files are required if they occur in call stack.
#
# these files must also be renamed exactly as the symlinks
# i.e. libpthread-2.28.so should be renamed to libpthread.so.0
# load executable file
file ./thedarkmod.x64
# force gdb to forget about local system!
# load all .so files using local directory as root
set sysroot .
# drop dump-recorded paths to .so files
# i.e. load ./libpthread.so.0 instead of ./lib/x86_64-linux-gnu/libpthread.so.0
set solib-search-path .
# disable damn security protection
set auto-load safe-path /
# load core dump file
core core.6487
# print stacktrace
bt