I'm a beginner in C++ and I started an Udemy course. In that course they recommend using CodeLite as IDE, so I decided to give it a try. In the course, they write a basic program that displays "Hello world!" to show how the IDE works. They compile then execute it, and a terminal window opens with the "Hello world!" message like normal.
In my case, after following the setup process step by step and using the exact same code as them, when I compile and execute the code, my terminal flashes for a split second and then disappears. In their video the terminal remains open but I thought that since they have an older version of CodeLite maybe in the newer one that I have, the terminal is supposed to close by default.
I went online and found people saying that a way of keeping the terminal open is by adding #include and system("pause"); on Windows, but in my case the terminal keeps behaving the same, and CodeLite doesn't report any problems. I've also tried cin.get(); with no success.
Any idea what could be causing this problem?
I had the same problem and I did these steps to solve the problem:
Uninstalled CodeLite.
Installed MinGW correctly.
Then reinstalled CodeLite.
Then did tutorial steps: Click Scan then select MinGW.
After I did these steps, it worked normally.
I had the same problem running Codelite on OpenSuse Leap 15.1. I eventually found a very simple answer. Go to the Settings menu, select Preferences and then Terminal, on the left towards the bottom. Change it to konsole to use the standard terminal, rather than the codelite-terminal.
I know this is an old question, but did not see the answer that worked for me. Debugging (F5) will close the terminal after completion.
However, running/executing (CTRL+F5) will not. Leaves terminal open. At least this is the case for me, and hopefully this helps someone out.
I know this is an old question, but CodeLite has a Project-level setting for "pause when execution ends" which will pause the program before the terminal closes so that you can see outputs and the like.
To turn on just right click on your project, go to settings, and it should be in the center of the general tab.
I went online and found people saying that a way of keeping the terminal open is by adding #include and system("pause");
And this is the wrong way to do it - the desire to leave the window open/closed is not meant to be controlled by your program; but the thing calling it. For example, you break the ability to run it as part of a headless script.
Much better would be to run it in debug and put a break point at the return of main, or to find the configuration option in your IDE that stops it closing the window.
I am not aware why CodeLite would behave like that. If you really added some pause or blocking call and it still closes, it looks like it is not really running the program (e.g. something breaks before that or something is misconfigured).
First, try to open a terminal yourself (e.g. cmd or PowerShell on Windows), and execute your compiled program there -- that way, the terminal will remain open. If that works, then compilation went fine, but something is wrong with CodeLite's configuration, most likely.
Otherwise, as a last resort, since using CodeLite is not strictly required, simply switch to another IDE/toolchain, e.g. Visual Studio (on Windows).
For some reason, after closing and reopening CodeLite, it now works, the terminal remains open when I run it from the IDE. I don't know what solved the problem since I've closed and reopened CodeLite at least 5 times before this without anything happening. Thanks for the help though.
I had the same issue. What I found wrong was that the compiler that I installed was 32bit and I was using the 64bit CodeLite version . Try Installing the 32bit CodeLite version and it should work fine.
It worked for me.
I had this problem also, I tried uninstalling and reinstalling code lite but the problem still occurred.
I went back and checked the Environment Variables in control panel and I had placed the systems variables in "Path" to the incorrect Bin directory.
I corrected the entry, uninstalled and reinstalled code lite again and the problem was resolved.
Hey I also had the same problem, doing the same course! What I did was to relocate my mingw-w64 folder, deleted the earlier path from environment variables and added the new path. I uninstalled CodeLite; not saving the user information. I actually downloaded the 14.0.0(64-bit) instead of the newer version 14.0.1(64 bit) . Then I did the steps that Frank tells you and it worked out for me.
I am completing the same Udemy course and encountered a similar problem of the console closing immediately. I encountered the problem for a workspace with 1.) a long name and 2.) ending with an underscore "_". I reduced the size of the folder name which also involved deleting the trailing underscore. This appears to have solved the problem. I encountered this problem with one of Frank's provided workspaces so I knew it was not a compiler issue.
I had an issue with section 20 of my Udemy course because it had parenthesis in the workspace folder name. "(STL)" at the end. Once I got rid of the special characters, it worked fine.
If pause("system"); or cin or restarting Program and whole PC solutions are not working, then make sure to:
Copy your code.
Create new Project and past your code there.
Make sure the new project is selected before trying to double-click it.
Notes:
You can now delete the old not working project and rename your new project.
I don't know what's the reason of the problem, but I did that and it worked for me.
You need to make sure if it is 64bits CodeLite then you have installed 64bits MinGW. Through the IDE itself, you can re-run the setup wizard
Restarting Codelite worked for me ...
I have OSX Yosemite 10.10.5, QtCreator 4.1.0, Qt 5.7.0 and Xcode 7.2.1.
If I write any native C++ program in QtCreator (console, gui - anything) I am unable to debug that program from QtCreator. Breakpoints get ignored, the program executes without pause and runs to completion no matter what I try.
I have tried the Xcode's LLDb, system GDB and Homebrew GDB as debuggers. the versions of GDB fail to start. Homebrew GDB has been codesigned.
This all used to (a few year back) just work beautifully and I am at a loss as to what might have changed.
Curiously, if I generate an exception inside the program - like accessing through a null pointer, the debugger shows me where this happens in just the way I would expect so, presumably, the debugger is running but simply treating me with complete disdain.
I know there are many versions of this question but none seem to address the problem adequately or offer workable solutions, or they apply to much older versions of the products.
Any suggestions?
This version of qtCreator (4.1.0) saw the return of the warning about having the build directory at the same level as the project directory. In Windows, this is done automatically. My mac installation does not get it right. (I may have messed a while back - cannot remember).
So - if the build directory is inside the project directory, debugging fails. Move the build directory up to the same level as the project directory and everything seems to work fine.
You can set the default build directory in the preferences/Build & Run dialogue. The path should start with ../
You will need to think about the folder structure before setting up the project unless you want build folders appearing in awkward places. So, a project folder structure like this is OK:
But one like this is not:
If this was already obvious to you, great. I have been messing with this for ages.
Many thanks to those who replied and anyone else who took the time to read the question. What helped e find it was the suggestion by #AlexanderVX that his setup was the same as mine but his worked. The only bit of my setup he could not see in the screenshots was the start of the build path. So that was the clue.
Good afternoon,
There is an error that has been occasionally occurring right after my project successfully builds. This error states "Errors exist int he active configuration, proceed with Launch?" This error usually occurs after I get some errors in the build previously, fix/clean them, and rebuild again. It occurs between the build and launching the debugger, because if I am disconnected from the remote system, it pops up before it attempts connecting to GDB.
The project builds without issues, and if I restart eclipse, I am able to build and debug without a problem. The issue is that I end up losing all of my undo states and the general discomfort of having to restart eclipse all the time.
This seems like strictly an eclipse issue,
Things I've tried that have made no difference: Cleaning the project, deleting files, etc. This seems to be a bug in eclispe,
If anyone has any knowledge on how to get rid of this prompts, please advise,
Thank you,
I do use to work in Eclipse cause i find it pretty good, but every day i am encountering this problem..."'Cleaning all projects has encountered a problem'. Errors occured during the build." when I hit the "clean projects" button. I have win 7 64 bit.
The only solution for this issue to work is to restart my computer. But I don't find it that good, because even if I restart my computer in the next 5 minutes when I compile a certain program it gets stuck again, it shows the same annoying message.
Please give me a solution to make this work. I wouldn't like to switch to visual studio...
It's hard to tell for sure, but your application might have some unreleased resources which 'clean' command can't remove. Did executable process terminate? If not, you whould have this error. You could try to remove binaries from build folder manually and see what file causes and error.
Basically, yesterday I could program in C++ and today I cannot.
I'm trying to write a simple hello world program in Eclipse Helios using the MinGW C/C++ compiler and I'm running into several problems, and I believe this one to be the root of it.
At first the program compiled and built, but when I tried to run it, an error dialogue said the FirstProject.exe file could not be found/does not exist in the launch configuration. However, I got no errors building and I could clearly see the binaries in Debug/FirstProject.exe in my project explorer. I tried refreshing my project explorer and alas, the file disappeared before my eyes.
I tried building the program again, and that's when I get this error:
c:/mingw/bin/../lib/gcc/mingw32/4.6.1/../../../../mingw32/bin/ld.exe: final link failed: No space left on device
I don't know what device it's talking about. I have more than 1TB left on this hard drive, so it can't be that. I tried emptying my %Temp% folder and recycling bin (suggestions I found trying to search for a solution for this problem) but to no avail.
It may be worth noting that C++ programs I have written in the past are still running. I'm very new to programming, so I don't know how much information you need, but I'll gladly add anything you need if you think you can help me out.
I just solved this on one of the computers at work which had the same issue when compiling through Codelite. Moving workspaces, rebooting, and reinstalling Codelite didn't fix the problem. I also checked permissions on the /temp folder which were fine.
It turns out there were permission issues/other issues with the disk. Running a disk check fixed a few issues on the disk and that allowed the program to compile. If this doesn't solve your issue you may also want to try disabling any anti-virus/spyware programs and try again.
I just solved this problem on my PC. Actually what the problem in my case was that my windows defender (or any antivirus in someone's case) was blocking ld.exe from accessing the protected folder that is the source code folder. You can correct this by going into the Virus and threat protection settings of your PC and then find there for blocked history. You will definitely find there a history record of that blockage. Then just go and allow on this device it. And boom 😁