How to build FLTK to using with Netbeans (Windows), i have tried but not success. Help me
What problem did you run into, and what compiler? I'll assume you're using GCC and the Cygwin tools?
From FLTK's own site
There are three ways to build FLTK
under Microsoft Windows. The first is
to use the Visual C++ 5.0 project
files under the "visualc" directory.
Just open (or double-click on) the
"fltk.dsw" file to get the whole
shebang.
The second method is to use the
configure script included with the
FLTK software; this has only been
tested with the CygWin tools:
sh configure --prefix=C:/FLTK
make
Related
I tried installing CygWin64, but I cannot find any executables to build my code with in the C:\cygwin64 directory created.
I tried Win-Builds but the setup doesn't load with any mirror I give it. It tries to connect 3 times then aborts.
I tried MinGW-W64-Builds, but I cannot figure out how to install it. I can see a .sh file there, but I believe that is for Linux, so I do not know why because it says it is for Windows
Is there even a way to use 64-bit GCC on Windows? I am trying to tie it to a Code::Blocks IDE as that one only comes with the 32-bit version of MinGW.
Check out out the MinGW-w64 + GCC personal build at http://winlibs.com/.
No installation required, just unzip.
Examples on how to use are on the site, including on how to integrate with Code::Blocks IDE.
I want to start doing some c++ but need it to be cross platform. I have found wxWidgets as a GUI solution and will use some of their SQL solutions for my program.
I tried searching the internet for how to install wxwidgets on Eclipse Mac but no luck. Haven't found anything that I can wrap my head around it.
wxWidgets is a C++ cross-platform and cross-compiler solution. It means that you don't need to install it. You can just compile it and use it to develop a software.
In order to compile this library, you should have a C/C++ compiler (clang or gcc on OSX/Mac) and their toolchain. Also if you plan to develop for OSX, you shuold have an OSX/Cocoa SDK installed (it is installed automatically with Xcode, have no idea about Eclipse).
In order to do so, you should:
Install C/C++ compiler (either with Xcode or Eclipse or any other IDE you have available).
Download latest wxWidgets release and unpack to you home diectory.
Open up a Terminal and issue following commands:
a. cd ~/wxWidgets
b. mkdir buildMac
c. cd buildMac
d. ../configure --enable-debug --with-cocoa --with-mac-osx-version-min=10.7 && make
e. ./wx-config --cxxflags
f. ./wx-config --libs
Open up Eclipse and start a new C++ project. If you are on OSX you may choose C++ bundle application.
Open the project properties and copy the results of the commands 3e and 3f to the project properties where appropriate. Consult with Eclipse manual/ML/forum to understand where to put that info.
Copy the file ~/wxWidgets/samples/minimal/minimal.cpp to you project directory and add this file to you project. Compile and run the project.
If you get stuck with any of the above instructions or get an error during compilation of either library or your project - don't hesitate to ask either here or open another thread.
Also, you can register on the wxWidgets forum at forums.wxWidets.org and subscribe to the wx-users ML.
Good luck.
I regularly use Code::Blocks and MinGW for my C/C++ projects. I would like to be able to use OpenCV, since it has a nice library for computer vision projects. They have dropped support for MinGW. I have heard you can build it on your own somehow, but I have no experience doing this with 3rd party libraries. Can someone explain how to build it in a simple way for MinGW?
There is, or at least there was at least until 2.4.6, precompiled version of opencv that works out of the box with mingw as long as you use the dw2(standard) version of mingw.
since i needed sjlj support i had to build my own version of openCV 2.4.6
I did he following - i am pretty sure it will work for the current openCV version as well
Setup your preferred Mingw Environment - i would strongly recommend to use gcc 4.5 or newer
Intstall Msys
Intall Cmake - you can get a binary package
Start the Cmake GUI
Select the openCV source folder
Click Configure and select MSYS-Makfiles
Errors in the first run of Configure might be resolved if you run Configure again
Click Generate
use MSYS make to run the generated makefile
Copy all desired libraries and include files to your mingw-installation or your project
I have downloaded the latest version available of Borland C++ 5.5 compiler. I have installed the exe file but the program doesn't run.
I have got this in READ ME file of the installation package but I cant make out anything..
Installing and running the Command Line Tools
Run freecommandlinetools.exe; choose the drive and folder into
which you want to install the free
C++Builder 5 command line tool
development system.
From the bin directory of your installation: a. Add
"c:\Borland\Bcc55"
to the existing path b. Create a bcc32.cfg file which will set
the compiler options for the Include
and Lib paths (-I and -L switches to
compiler) by adding these lines:
-I"c:\Borland\Bcc55\include"
-L"c:\Borland\Bcc55\lib" c. Create an ilink32.cfg file which will
set
the linker option for the Lib path by
adding this line:
-L"c:\Borland\Bcc55\lib"
Please help me to understand this.
I suggest to use Borland C++ XE3, XE2, or 6.0 at least.
There were so many bugs in Borland 5.5 which will confuse you, or make trouble to your project.
Borland 5.5 is an extremely old compiler.
It doesn't even implement std::string properly.
Use a more modern compiler, like g++ or Visual C++ (they're both free).
Cheers & hth.,
I'm trying to get eclipse to work with MinGW.
I've done the following:
Downloaded CDT for eclipse.
Installed MinGW.
Added C:\MinGW\bin to my path.
Opening a command prompt (CMD) and typing g++ or alike works fine.
I run eclipse, create a "New C++ Project", and only get the option saying "other toolchains".
There's a MILLION tutorials out there saying eclipse should identify MinGW on its own. It doesn't, and I don't know what to do. I've tried reinstalling everying in just about every order posible. Still no luck.
I've also noted some tutorials say something about creating a "Managed C++ Project". I've no such option, all I get is "C++ Project" and "C Project"
edit:
I have eclipse ganymede, windows x86_64, version 3.4.2
http://download.eclipse.org/eclipse/downloads/drops/R-3.4.2-200902111700/index.php
Running the "Eclipse IDE for C/C++ developers" fails, since there's no x64 version for windows. The x86 version requires x86 JAVA installed as well, and installing two versions of java, gave nothing but trouble in the past.
The instructions for setting up MinGW in Ganymede are located here.
The following are instructions and
links on how to install the current
version of MinGW. Note that these
links may become inaccurate over time
as new versions of MinGW components
are introduced. Please check the MinGW
File Release section for the latest
versions.
Download and run the MinGW setup program, MinGW-5.1.3.exe.
Select download and install the MinGW base tools and the g++ compiler.
You may select the Current or
Candidate version of these tools. You
may also install any of the other
available compilers as well.
Do not install the MinGW Make feature as the MSYS version of make
from step 5 is a more complete
implementation of make.
The MinGW setup program currently does not install the gdb
debugger. To install the debugger,
download the file from the following
location: gdb-6.6.tar.bz2
Extract the contents of the file gdb-6.6.tar.bz2 to the same location
where you installed MinGW.
If you want to use Makefile projects, download and run the setup
program from the following location:
MSYS-1.0.10.exe. MSYS provides an
implementation of make and related
command line tools. This is not
required for other types of projects
with the MinGW toolchain, which use
CDT's internal build tools to perform
the build.
Following this process resolved any problems I had.
I had the same exact problem with Eclipse Galileo and CDT 6.0.1. It turns out that CDT only recognized MinGW when it's located under c:\mingw. I had it in c:\msys\mingw so that was the problem. After I changed that everything worked fine.
The distinction between managed make projects and makefile project was removed in CDT 4.x, I think. Now there is only one type of project, but you can select different builders. CDT includes an internal builder which does not use makefiles and another one which does.
First, save yourself the effort of "reinstalling in every order possible". That is also known as trial-and-error, and will only make you more frustrated. Apply the normal problem-solving skills you have as a programmer.
Given that you have MinGW installed, what happens if you download "Eclipse IDE for C/C++ developers", start eclipse.exe, and try to create a C++-project with a MinGW toolchain?
EDIT: remember: the key in getting help with problems like these is to produce a minimal example which fails. Also, it would help if you provided URLs to the packages you installed (MinGW, Eclipse, etc.).
EDIT: I just installed CDT using the Ganymede update site, downloaded and installed MinGW from here, and restarted Eclipse, and everything worked fine. I know that doesn't help you, but it does prove that the toolchain detection isn't completely broken. Something is weird on your side.
You could try Wascana Desktop Developer. Its a distribution of Eclipse CDT configured specifically for developing on Windows.
I had the same problem (i.e. Eclipse not finding MinGW on the PATH) after I removed some of the unused files/folders from MinGW. It was ~600 MB and I was tasked to trim it down before adding to source control. I got it down to a workable ~200 MB. When I tried to re-create an Eclipse workspace afterwards, MinGW disappeared from available toolchains. It reappeared after I put the original MinGW install on the path.
HTH