First time using WAMP, as I really want something to do. So basically, when I go to http://localhost/, Firefox says it's unable to connect. And, even if it did work, where would I put the files to display my website?
Are you sure all the services are running properly ? the icon in the bottom right should be white, if its not then click on it and click on the "start all services".
You place your files in the www folder in the install directory of wamp (usually C:/Program Files/wamp/www/ )
Ikke meant the question should be on https://superuser.com/
first of all stop these applications skype,sql server, IIS Server, then it will work.
you can stop sql server from SQL Server 2014 Configuration manager and IIS Server from Internet Information Services (IIS) Manager.
I understand you installed Wampserver correct.
If http://localhost/ doesn't work.
Try browse to 127.0.0.1 in your browser.
Make sure your Wampserver icon is Green.
Red = Offline/major error
Orange = not all services are started. Won't work.
Green = You're allright! I'm working
Related
I recently opened Wamp server after a long time I didn't touch it. It was fine back then, but when I try to open Wamp server now, I get an error that says
The application was unable to start correctly (0xc0000142).
In addition, the wamp icon is orange, while back then, it was green.
I have tried to search for a solution on the internet, but I wasn't able to find.
I have also noticed that when I try to open phpMyAdmin, the page says
#2002 - No connection could be made because the target machine actively refused it.
The server is not responding (or the local server's socket is not correctly configured)
But i'm able to open my localhost start page (the one with the loaded extentions list).
Thanks for helping.
Same error after creators update 1703 (Windows 10).
Error: httpd.exe was unable to start correctly
Error code: 0xc0000142
I'll do a quick google search and see what this is about. I will get back for sure.
UPDATE: SOLUTION
WAMP has released a cumulative update to fix this. It is strongly encouraged that you apply this update after you’ve installed WAMP.
Wampserver update 3.0.8. Sourceforge.
Once you apply this fix, you will be able to start (Apache) WAMP normally.
Actually this error relate to Windows Firewall.
You can go to "Control Panel\System and Security\Windows Firewall\Allowed apps" after that click change settings and in Allow apps and feature find "Appache HTTP Server" and check public then click OK.
Verify your Windows Firewall Services is not running.
I faced the same issue after installing 64bit Wamp. While installing I was not prompted to allow http daemon by the firewall service.
Unsure what to do, I installed the 32bit Wamp & the firewall service prompted me to allow the http daemon.
Wamp started showing green!!
As i have installed WAMP developer Pro recently and i have solved everything that it needed but the main problem is coming which is most important , i am unable to put my website online as i have made a url from WAMP developer and i have putted my all website file in it it is working fine in my as i type www.radharamnji.com it comes but other can not see it so please tell me how i can make it online so everyone can see it.
here is a pic of WAMP developer
If You Have A Website and domain You Have To Upload All Of Your Files To Host Public_html Folder.
If You Want to change your computer to a server you have to buy a valid IP and set dns settings and ...
If You Upload Your Files On The Internet YOu Have Too Change Your Adrress to Relative.
For Example Change The Adrress Of Picture From (http:/localhost/img/img1.jpg) To (img/img1.jpg).
The WAMP you are using has a guide for this located on its site's /howto section: "Enabling Online and Internet Access of Websites...".
Chances are:
Your Windows Firewall (and also anti-virus s/w such as McAfee) are blocking incoming port 80 and 443 TCP connections, and the httpd.exe process.
Your Router does not have any port-forwarding set up for WAN:80 to LAN:80.
OK, the documentation says:
If you configure the folder containing FW/1 as a new web root and
browse to it, you'll see an introductory application.
So I created a new site in Windows Vista and pointed it to the Framework 1 bundle.
I've installed CF10, and am able to navigate to http://localhost:8500/CFIDE/administrator/
so I know that's working.
But when I navigate to http://localhost/, it gives me:
Error Summary
HTTP Error 500.0 - Internal Server Error
The page cannot be displayed because an internal server error has occurred.
Requested URL http://localhost:80/
Physical Path C:\inetpub\seancorfield-fw1-9e69741
And trying localhost:8500 goes to C:\ColdFusion10\cfusion\wwwroot
I wrote up a pretty detailed blog post here:
http://blog.bittersweetryan.com/2012/02/changing-webroot-of-coldfusion-zeus.html
It looks like you may not have updated your mapping to the WEB-INF and CFIDE folders.
If you installed it as the built in server then it will be 8500.
If you integrated into IIS then it will be port 80
You may just need to run the web connector tool, you will find it in the start menu.
If that doesnt work, you likely don't have the necessary bits of IIS installed.
created and deployed a Web service application in a virtual directory using IIS 6.1. The client application works fine on the same machine. But it is not working in another machine where the client application is copied manually. Can any one help what went wrong?
In Internet explorer, The XML file is displayed in the same machine. But from other machine, 'Un able to open the page' error occurs.
Suggestions please...
Regards,
Baskaran A.
Did you check your firewall settings? Can you open other pages that are served by the same IIS webserver?
My first 2 guesses would be:
1) Firewall settings, as previously mentioned.
2) The client app has a hard coded path in it somewhere that ought to be a relative path or, perhaps a URL. Something along the lines of 127.0.0.1 or localhost or C:\... within the app or in its configuration file(s).
Windows web server 2008 R2 64 bit, CF9 64 bit, IIS7, ISAPI extensions and filters and II6 metabase compatability installed. OS is on C default, and trying to install CF to D:
Testing IIS and it shows index.html correctly from c:\inetpub\wwwroot at http://localhost/index.html
Then I install CF to D:\ , single standard server licence, select run with all IIS sites, select C:\inetpub\wwwroot as the web root for administrator, and when it gets to the bit where it is supposed to open up administrator to complete the installation it opens up the browser with a 500 error.
Now when I go back to http://localhost/index.html I also get a 500 error, if i uninstall CF I can again reach the html page.
CFIDE has been installed in C:\inetpub\wwwroot presumably correctly. Can anyone tell me where I'm going wrong please.
Update
The exact IIS error is
HTTP Error 500.0 - Internal Server Error
The page cannot be displayed because an internal server error has occurred.
Module IsapiModule
Notification ExecuteRequestHandler
Handler AboMapperCustom-28262
Error Code 0x800700c1
Requested URL http://127.0.0.1:80/test.htm
Physical Path C:\inetpub\wwwroot\test.htm
Logon Method Anonymous
Logon User Anonymous
Resolves as below
There is a setting Enable 32-Bit Applications under Application Pool>Advanced settings. Set this to True and you will gain access to your CFIDE>Administrator page.
I would suggest first trying a restart. It is one of those things that after the fact sounds so obvious, but you never think of it. I know I have had problems with installing CF under IIS and had to restart the server to get it running.
I'm humiliated to admit it, but the problem was that what I thought was the cf9 64 bit installer, was the 32 bit one.
# Dave and # CfSimplicity many thanks for your help and in particular the IIS user account stuff was new learning for me.
Try checking the file system permissions for this folder:
D:\ColdFusion9\runtime\lib\wsconfig
The account that IIS uses needs Read, Execute and Modify permissions on this folder and below.
It might be because of two problems.
1) you haven't installed CGI, ISAPI extensions and ISAPI filters aren't installed yet in Web Server (IIS) of Server manager.
Window 2008 R2 with Coldfusion
2) you need to enable 32 bit application at IIS7.
Internal 500 error CF9 on Window 2008
I tried a different approach with my Windows 7 Home Premium - See http://coldfusioner.blogspot.com/2011/12/fix-number-1-installing-64-bit.html
It seems that I was successful by using the IIS Connector batch scripts manually and then to create a second default web site after installing the handlers. My article link above shows the steps I took - a very raw article and will likely be refined as I hear from others how they adapted my approach. The important thing is that this worked ;>) I hope it helps others...
The problem could be that your Application Pool that is part of your default website. It is possible to set it to run 32 bit applications. Try setting the Enable32bit to false in the defaultapppool of your IIS server, restart the app pool and your www service itself. Then try to use the ColdFusion wsconfig tool to add the IIS mapping. It should work even without the cf 9 updater 1 being installed on the server.
To avoid a 500 error when accessing the Administration console for the first time when installaing ColdFusion 9 on a Windows 2008 server with IIS 7.5 installed, include the "IIS_IUSRS" user group with "Full Control" to the \Lib\wsconfig folder in Enterprise server or \runtime\lib\wsconfig folder in Standard server. Before starting the ColdFusion install, make sure the "IIS 6 Management Compatibility" functions are installed, especially the "IIS 6 Metabase Compatibility" function.
Assuming that you use the default installation paths (C:\JRun4 for Enterprise or C:\ColdFusion9 for Standard), here is a step-by-step approach:
Begin the ColdFusion installer as an Administrator. At the completion of the initial installation process, but before accessing the online Administration console, do the following:
1.) At the Start Menu, select "Computer"
2.) In the Enterprise install, go to C:\JRun4\lib. For the Standard install, go to C:\ColdFusion9\runtime\lib.
3.) Right-click "wsconfig" and select "Properties" to open the wsconfig properties dialog box.
4.) Click the "Security" tab.
5.) Click "Edit" to change permissions for that folder.
6.) Click "Add..." to add a new user/group.
7.) Enter "IIS_IUSRS" in the Object name field and click OK to return to the Permissions dialog box.
8.) In the permissions dialog box, ensure that the "IIS_IUSRS" group is highlighted and click "Full Control" in the "Allow" column, then click "OK" to close the dialog box. Ensure that the permissions change will affect all files and folders under wsconfig.
9.) Click "OK" to close the wsconfig properties box.
Return to the ColdFusion installer wizard and continue the installation by clicking the open ColdFusion Administrator link. If the settings are correct, after a minute or two, a web browser with the ColdFusion Administrator Console should appear so you can complete the installation.