This question already has answers here:
Closed 12 years ago.
Possible Duplicate:
Could anyone explain these undefined behaviors (i = i++ + ++i , i = i++, etc…)
In Java the evaluation order is specified to be left-to-right. Is this the case for C and C++ as well, or is it implementation dependent? I do remember that the evaluation order is unspecified for function arguments, but what about sub-expressions?
It is unspecified which of the arguments to + is evaluated first - but that doesn't even matter, because in C and C++, modifying the same object twice without an intervening sequence point is completely undefined behaviour.
Here you're modifying x three times without an intervening sequence point, so you're well into here be dragonnes territory ;)
The relevant part of the C99 standard is "6.5 Expressions":
2 Between the previous and next
sequence point an object shall have
its stored value modified at most once
by the evaluation of an expression.
Furthermore, the prior value shall be
read only to determine the value to be
stored.
and
3 The grouping of operators and
operands is indicated by the
syntax. Except as specified later
(for the function-call (), &&, ||, ?:,
and comma operators), the order of
evaluation of subexpressions and the
order in which side effects take place
are both unspecified.
It's possible to write legal code that demonstrates the unspecified order of evaluation - for example:
#include <stdio.h>
int foo(void)
{
puts("foo");
return 1;
}
int bar(void)
{
puts("bar");
return 2;
}
int main()
{
int x;
x = foo() + bar();
putchar('\n');
return x;
}
(It is unspecified whether you get output of foobar or barfoo).
C++03 Standard 5.4
Except where noted, the order of
evaluation of operands of individual
operators and subexpressions of
individual expressions, and the order
in which side effects take place, is
unspecified.53) Between the previous
and next sequence point a scalar
object shall have its stored value
modified at most once by the
evaluation of an expression.
Furthermore, the prior value shall be
accessed only to determine the value
to be stored. The requirements of this
paragraph shall be met for each
allowable ordering of the
subexpressions of a full expression;
otherwise the behavior is undefined.
... hence, undefined and implementation dependant.
The C standard does not guarantee that the post-increment will actually "happen" after the pre-increment. So that is undefined behaviour.
That's not a valid C statement, so it doesn't make sense to talk about the evaluation order.
Related
Recently in an interview there was a following objective type question.
int a = 0;
cout << a++ << a;
Answers:
a. 10
b. 01
c. undefined behavior
I answered choice b, i.e. output would be "01".
But to my surprise later I was told by an interviewer that the correct answer is option c: undefined.
Now, I do know the concept of sequence points in C++. The behavior is undefined for the following statement:
int i = 0;
i += i++ + i++;
but as per my understanding for the statement cout << a++ << a , the ostream.operator<<() would be called twice, first with ostream.operator<<(a++) and later ostream.operator<<(a).
I also checked the result on VS2010 compiler and its output is also '01'.
You can think of:
cout << a++ << a;
As:
std::operator<<(std::operator<<(std::cout, a++), a);
C++ guarantees that all side effects of previous evaluations will have been performed at sequence points. There are no sequence points in between function arguments evaluation which means that argument a can be evaluated before argument std::operator<<(std::cout, a++) or after. So the result of the above is undefined.
C++17 update
In C++17 the rules have been updated. In particular:
In a shift operator expression E1<<E2 and E1>>E2, every value computation and side-effect of E1 is sequenced before every value computation and side effect of E2.
Which means that it requires the code to produce result b, which outputs 01.
See P0145R3 Refining Expression Evaluation Order for Idiomatic C++ for more details.
Technically, overall this is Undefined Behavior.
But, there are two important aspects to the answer.
The code statement:
std::cout << a++ << a;
is evaluated as:
std::operator<<(std::operator<<(std::cout, a++), a);
The standard does not define the order of evaluation of arguments to an function.
So Either:
std::operator<<(std::cout, a++) is evaluated first or
ais evaluated first or
it might be any implementation defined order.
This order is Unspecified[Ref 1] as per the standard.
[Ref 1]C++03 5.2.2 Function call
Para 8
The order of evaluation of arguments is unspecified. All side effects of argument expression evaluations take effect before the function is entered. The order of evaluation of the postfix expression and the argument expression list is unspecified.
Further, there is no sequence point between evaluation of arguments to a function but a sequence point exists only after evaluation of all arguments[Ref 2].
[Ref 2]C++03 1.9 Program execution [intro.execution]:
Para 17:
When calling a function (whether or not the function is inline), there is a sequence point after the evaluation of all function arguments (if any) which takes place before execution of any expressions or statements in the function body.
Note that, here the value of c is being accessed more than once without an intervening sequence point, regarding this the standard says:
[Ref 3]C++03 5 Expressions [expr]:
Para 4:
....
Between the previous and next sequence point a scalar object shall have its stored value modified at most once by the evaluation of an expression. Furthermore, the prior value shall be accessed only to determine the value to be stored. The requirements of this paragraph shall be met for each allowable ordering of the subexpressions of a full
expression; otherwise the behavior is undefined.
The code modifies c more than once without intervening sequence point and it is not being accessed to determine the value of the stored object. This is clear violation of the above clause and hence the result as mandated by the standard is Undefined Behavior[Ref 3].
Sequence points only define a partial ordering. In your case, you have
(once overload resolution is done):
std::cout.operator<<( a++ ).operator<<( a );
There is a sequence point between the a++ and the first call to
std::ostream::operator<<, and there is a sequence point between the
second a and the second call to std::ostream::operator<<, but there
is no sequence point between a++ and a; the only ordering
constraints are that a++ be fully evaluated (including side effects)
before the first call to operator<<, and that the second a be fully
evaluated before the second call to operator<<. (There are also
causual ordering constraints: the second call to operator<< cannot
preced the first, since it requires the results of the first as an
argument.) §5/4 (C++03) states:
Except where noted, the order of
evaluation of operands of individual operators and subexpressions of
individual expressions, and the order in which side effects take place,
is unspecified. Between the previous and next sequence point a scalar
object shall have its stored value modified at most once by the
evaluation of an expression. Furthermore, the prior value shall be
accessed only to determine the value to be stored. The requirements of
this paragraph shall be met for each allowable ordering of the
subexpressions of a full expression; otherwise the behavior is
undefined.
One of the allowable orderings of your expression is a++, a, first
call to operator<<, second call to operator<<; this modifies the
stored value of a (a++), and accesses it other than to determine
the new value (the second a), the behavior is undefined.
The correct answer is to question the question. The statement is unacceptable because a reader cannot see a clear answer. Another way to look at it is that we have introduced side-effects (c++) that make the statement much harder to interpret. Concise code is great, providing it's meaning is clear.
Recently in an interview there was a following objective type question.
int a = 0;
cout << a++ << a;
Answers:
a. 10
b. 01
c. undefined behavior
I answered choice b, i.e. output would be "01".
But to my surprise later I was told by an interviewer that the correct answer is option c: undefined.
Now, I do know the concept of sequence points in C++. The behavior is undefined for the following statement:
int i = 0;
i += i++ + i++;
but as per my understanding for the statement cout << a++ << a , the ostream.operator<<() would be called twice, first with ostream.operator<<(a++) and later ostream.operator<<(a).
I also checked the result on VS2010 compiler and its output is also '01'.
You can think of:
cout << a++ << a;
As:
std::operator<<(std::operator<<(std::cout, a++), a);
C++ guarantees that all side effects of previous evaluations will have been performed at sequence points. There are no sequence points in between function arguments evaluation which means that argument a can be evaluated before argument std::operator<<(std::cout, a++) or after. So the result of the above is undefined.
C++17 update
In C++17 the rules have been updated. In particular:
In a shift operator expression E1<<E2 and E1>>E2, every value computation and side-effect of E1 is sequenced before every value computation and side effect of E2.
Which means that it requires the code to produce result b, which outputs 01.
See P0145R3 Refining Expression Evaluation Order for Idiomatic C++ for more details.
Technically, overall this is Undefined Behavior.
But, there are two important aspects to the answer.
The code statement:
std::cout << a++ << a;
is evaluated as:
std::operator<<(std::operator<<(std::cout, a++), a);
The standard does not define the order of evaluation of arguments to an function.
So Either:
std::operator<<(std::cout, a++) is evaluated first or
ais evaluated first or
it might be any implementation defined order.
This order is Unspecified[Ref 1] as per the standard.
[Ref 1]C++03 5.2.2 Function call
Para 8
The order of evaluation of arguments is unspecified. All side effects of argument expression evaluations take effect before the function is entered. The order of evaluation of the postfix expression and the argument expression list is unspecified.
Further, there is no sequence point between evaluation of arguments to a function but a sequence point exists only after evaluation of all arguments[Ref 2].
[Ref 2]C++03 1.9 Program execution [intro.execution]:
Para 17:
When calling a function (whether or not the function is inline), there is a sequence point after the evaluation of all function arguments (if any) which takes place before execution of any expressions or statements in the function body.
Note that, here the value of c is being accessed more than once without an intervening sequence point, regarding this the standard says:
[Ref 3]C++03 5 Expressions [expr]:
Para 4:
....
Between the previous and next sequence point a scalar object shall have its stored value modified at most once by the evaluation of an expression. Furthermore, the prior value shall be accessed only to determine the value to be stored. The requirements of this paragraph shall be met for each allowable ordering of the subexpressions of a full
expression; otherwise the behavior is undefined.
The code modifies c more than once without intervening sequence point and it is not being accessed to determine the value of the stored object. This is clear violation of the above clause and hence the result as mandated by the standard is Undefined Behavior[Ref 3].
Sequence points only define a partial ordering. In your case, you have
(once overload resolution is done):
std::cout.operator<<( a++ ).operator<<( a );
There is a sequence point between the a++ and the first call to
std::ostream::operator<<, and there is a sequence point between the
second a and the second call to std::ostream::operator<<, but there
is no sequence point between a++ and a; the only ordering
constraints are that a++ be fully evaluated (including side effects)
before the first call to operator<<, and that the second a be fully
evaluated before the second call to operator<<. (There are also
causual ordering constraints: the second call to operator<< cannot
preced the first, since it requires the results of the first as an
argument.) §5/4 (C++03) states:
Except where noted, the order of
evaluation of operands of individual operators and subexpressions of
individual expressions, and the order in which side effects take place,
is unspecified. Between the previous and next sequence point a scalar
object shall have its stored value modified at most once by the
evaluation of an expression. Furthermore, the prior value shall be
accessed only to determine the value to be stored. The requirements of
this paragraph shall be met for each allowable ordering of the
subexpressions of a full expression; otherwise the behavior is
undefined.
One of the allowable orderings of your expression is a++, a, first
call to operator<<, second call to operator<<; this modifies the
stored value of a (a++), and accesses it other than to determine
the new value (the second a), the behavior is undefined.
The correct answer is to question the question. The statement is unacceptable because a reader cannot see a clear answer. Another way to look at it is that we have introduced side-effects (c++) that make the statement much harder to interpret. Concise code is great, providing it's meaning is clear.
Recently in an interview there was a following objective type question.
int a = 0;
cout << a++ << a;
Answers:
a. 10
b. 01
c. undefined behavior
I answered choice b, i.e. output would be "01".
But to my surprise later I was told by an interviewer that the correct answer is option c: undefined.
Now, I do know the concept of sequence points in C++. The behavior is undefined for the following statement:
int i = 0;
i += i++ + i++;
but as per my understanding for the statement cout << a++ << a , the ostream.operator<<() would be called twice, first with ostream.operator<<(a++) and later ostream.operator<<(a).
I also checked the result on VS2010 compiler and its output is also '01'.
You can think of:
cout << a++ << a;
As:
std::operator<<(std::operator<<(std::cout, a++), a);
C++ guarantees that all side effects of previous evaluations will have been performed at sequence points. There are no sequence points in between function arguments evaluation which means that argument a can be evaluated before argument std::operator<<(std::cout, a++) or after. So the result of the above is undefined.
C++17 update
In C++17 the rules have been updated. In particular:
In a shift operator expression E1<<E2 and E1>>E2, every value computation and side-effect of E1 is sequenced before every value computation and side effect of E2.
Which means that it requires the code to produce result b, which outputs 01.
See P0145R3 Refining Expression Evaluation Order for Idiomatic C++ for more details.
Technically, overall this is Undefined Behavior.
But, there are two important aspects to the answer.
The code statement:
std::cout << a++ << a;
is evaluated as:
std::operator<<(std::operator<<(std::cout, a++), a);
The standard does not define the order of evaluation of arguments to an function.
So Either:
std::operator<<(std::cout, a++) is evaluated first or
ais evaluated first or
it might be any implementation defined order.
This order is Unspecified[Ref 1] as per the standard.
[Ref 1]C++03 5.2.2 Function call
Para 8
The order of evaluation of arguments is unspecified. All side effects of argument expression evaluations take effect before the function is entered. The order of evaluation of the postfix expression and the argument expression list is unspecified.
Further, there is no sequence point between evaluation of arguments to a function but a sequence point exists only after evaluation of all arguments[Ref 2].
[Ref 2]C++03 1.9 Program execution [intro.execution]:
Para 17:
When calling a function (whether or not the function is inline), there is a sequence point after the evaluation of all function arguments (if any) which takes place before execution of any expressions or statements in the function body.
Note that, here the value of c is being accessed more than once without an intervening sequence point, regarding this the standard says:
[Ref 3]C++03 5 Expressions [expr]:
Para 4:
....
Between the previous and next sequence point a scalar object shall have its stored value modified at most once by the evaluation of an expression. Furthermore, the prior value shall be accessed only to determine the value to be stored. The requirements of this paragraph shall be met for each allowable ordering of the subexpressions of a full
expression; otherwise the behavior is undefined.
The code modifies c more than once without intervening sequence point and it is not being accessed to determine the value of the stored object. This is clear violation of the above clause and hence the result as mandated by the standard is Undefined Behavior[Ref 3].
Sequence points only define a partial ordering. In your case, you have
(once overload resolution is done):
std::cout.operator<<( a++ ).operator<<( a );
There is a sequence point between the a++ and the first call to
std::ostream::operator<<, and there is a sequence point between the
second a and the second call to std::ostream::operator<<, but there
is no sequence point between a++ and a; the only ordering
constraints are that a++ be fully evaluated (including side effects)
before the first call to operator<<, and that the second a be fully
evaluated before the second call to operator<<. (There are also
causual ordering constraints: the second call to operator<< cannot
preced the first, since it requires the results of the first as an
argument.) §5/4 (C++03) states:
Except where noted, the order of
evaluation of operands of individual operators and subexpressions of
individual expressions, and the order in which side effects take place,
is unspecified. Between the previous and next sequence point a scalar
object shall have its stored value modified at most once by the
evaluation of an expression. Furthermore, the prior value shall be
accessed only to determine the value to be stored. The requirements of
this paragraph shall be met for each allowable ordering of the
subexpressions of a full expression; otherwise the behavior is
undefined.
One of the allowable orderings of your expression is a++, a, first
call to operator<<, second call to operator<<; this modifies the
stored value of a (a++), and accesses it other than to determine
the new value (the second a), the behavior is undefined.
The correct answer is to question the question. The statement is unacceptable because a reader cannot see a clear answer. Another way to look at it is that we have introduced side-effects (c++) that make the statement much harder to interpret. Concise code is great, providing it's meaning is clear.
I've looked at a bunch of questions regarding sequence points, and haven't been able to figure out if the order of evaluation for x*f(x) is guaranteed if f modifies x, and is this different for f(x)*x.
Consider this code:
#include <iostream>
int fx(int &x) {
x = x + 1;
return x;
}
int f1(int &x) {
return fx(x)*x; // Line A
}
int f2(int &x) {
return x*fx(x); // Line B
}
int main(void) {
int a = 6, b = 6;
std::cout << f1(a) << " " << f2(b) << std::endl;
}
This prints 49 42 on g++ 4.8.4 (Ubuntu 14.04).
I'm wondering whether this is guaranteed behavior or unspecified.
Specifically, in this program, fx gets called twice, with x=6 both times, and returns 7 both times. The difference is that Line A computes 7*7 (taking the value of x after fx returns) while Line B computes 6*7 (taking the value of x before fx returns).
Is this guaranteed behavior? If yes, what part of the standard specifies this?
Also: If I change all the functions to use int *x instead of int &x and make corresponding changes to places they're called from, I get C code which has the same issues. Is the answer any different for C?
In terms of evaluation sequence, it is easier to think of x*f(x) as if it was:
operator*(x, f(x));
so that there are no mathematical preconceptions on how multiplication is supposed to work.
As #dan04 helpfully pointed out, the standard says:
Section 1.9.15: “Except where noted, evaluations of operands of individual operators and of subexpressions of individual expressions are unsequenced.”
This means that the compiler is free to evaluate these arguments in any order, the sequence point being operator* call. The only guarantee is that before the operator* is called, both arguments have to be evaluated.
In your example, conceptually, you could be certain that at least one of the arguments will be 7, but you cannot be certain that both of them will. To me, this would be enough to label this behaviour as undefined; however, #user2079303 answer explains well why it is not technically the case.
Regardless of whether the behaviour is undefined or indeterminate, you cannot use such an expression in a well-behaved program.
The evaluation order of arguments is not specified by the standard, so the behaviour that you see is not guaranteed.
Since you mention sequence points, I'll consider the c++03 standard which uses that term while the later standards have changed wording and abandoned the term.
ISO/IEC 14882:2003(E) §5 /4:
Except where noted, the order of evaluation of operands of individual operators and subexpressions of individual expressions, and the order in which side effects take place, is unspecified...
There is also discussion on whether this is undefined behaviour or is the order merely unspecified. The rest of that paragraph sheds some light (or doubt) on that.
ISO/IEC 14882:2003(E) §5 /4:
... Between the previous and next sequence point a scalar object shall have its stored value modified at most once by the evaluation of an expression. Furthermore, the prior value shall be accessed only to determine the value to be stored. The requirements of this paragraph shall be met for each allowable ordering of the subexpressions of a full expression; otherwise the behavior is undefined.
x is indeed modified in f and it's value is read as an operand in the same expression where f is called. And it's not specified whether x reads the modified or non-modified value. That might scream Undefined Behaviour! to you, but hold your horses, because the standard also states:
ISO/IEC 14882:2003(E) §1.9 /17:
... When calling a function (whether or not the function is inline), there is a sequence point after the evaluation of all function arguments (if any) which takes place before execution of any expressions or statements in the function body. There is also a sequence point after the copying of a returned value and before the execution of any expressions outside the function 11) ...
So, if f(x) is evaluated first, then there is a sequence point after copying the returned value. So the above rule about UB does not apply because the read of x is not between the next and previous sequence point. The x operand will have the modified value.
If x is evaluated first, then there is a sequence point after evaluating the arguments of f(x) Again, the rule about UB does not apply. In this case x operand will have the non-modified value.
In summary, the order is unspecified but there is no undefined behaviour. It's a bug, but the outcome is predictable to some degree. The behaviour is the same in the later standards, even though the wording changed. I'll not delve into those since it's already covered well in other good answers.
Since you ask about similar situation in C
C89 (draft) 3.3/3:
Except as indicated by the syntax 27 or otherwise specified later (for the function-call operator () , && , || , ?: , and comma operators), the order of evaluation of subexpressions and the order in which side effects take place are both unspecified.
The function call exception is already mentioned here. Following is the paragraph that implies the undefined behaviour if there were no sequence points:
C89 (draft) 3.3/2:
Between the previous and next sequence point an object shall have its stored value modified at most once by the evaluation of an expression. Furthermore, the prior value shall be accessed only to determine the value to be stored.26
And here are the sequence points defined:
C89 (draft) A.2
The following are the sequence points described in 2.1.2.3
The call to a function, after the arguments have been evaluated (3.3.2.2).
...
... the expression in a return statement (3.6.6.4).
The conclusions are the same as in C++.
A quick note on something I don't see covered explicitly by the other answers:
if the order of evaluation for x*f(x) is guaranteed if f modifies x, and is this different for f(x)*x.
Consider, as in Maksim's answer
operator*(x, f(x));
now there are only two ways of evaluating both arguments before the call as required:
auto lhs = x; // or auto rhs = f(x);
auto rhs = f(x); // or auto lhs = x;
return lhs * rhs
So, when you ask
I'm wondering whether this is guaranteed behavior or unspecified.
the standard doesn't specify which of those two behaviours the compiler must choose, but it does specify those are the only valid behaviours.
So, it's neither guaranteed nor entirely unspecified.
Oh, and:
I've looked at a bunch of questions regarding sequence points, and haven't been able to figure out if the order of evaluation ...
sequence points are a used in the C language standard's treatment of this, but not in the C++ standard.
In the expression x * y, the terms x and y are unsequenced. This is one of the three possible sequencing relations, which are:
A sequenced-before B: A must be evaluated, with all side-effects complete, before B begins evaluationg
A and B indeterminately-sequenced: one of the two following cases is true: A is sequenced-before B, or B is sequenced-before A. It is unspecified which of those two cases holds.
A and B unsequenced: There is no sequencing relation defined between A and B.
It is important to note that these are pair-wise relations. We cannot say "x is unsequenced". We can only say that two operations are unsequenced with respect to each other.
Also important is that these relations are transitive; and the latter two relations are symmetric.
unspecified is a technical term which means that the Standard specifies a set number of possible results. This is different to undefined behaviour which means that the Standard does not cover the behaviour at all. See here for further reading.
Moving onto the code x * f(x). This is identical to f(x) * x, because as discussed above, x and f(x) are unsequenced, with respect to each other, in both cases.
Now we come to the point where several people seem to be coming unstuck. Evaluating the expression f(x) is unsequenced with respect to x. However, it does not follow that any statements inside the function body of f are also unsequenced with respect to x. In fact, there are sequencing relations surrounding any function call, and those relations cannot be ignored.
Here is the text from C++14:
When calling a function (whether or not the function is inline), every value computation and side effect associated with any argument expression, or with the postfix expression designating the called function, is sequenced before execution of every expression or statement in the body of the called function. [Note: Value computations and side effects associated with different argument expressions are unsequenced. —end note ]
Every evaluation in the calling function (including other function calls) that is not otherwise specifically sequenced before or after the execution of the body of the called function is indeterminately sequenced with
respect to the execution of the called function.
with footnote:
In other words, function executions do not interleave with each other.
The bolded text clearly states that for the two expressions:
A: x = x + 1; inside f(x)
B: evaluating the first x in the expression x * f(x)
their relationship is: indeterminately sequenced.
The text regarding undefined behaviour and sequencing is:
If a side effect on a scalar object is unsequenced relative to either another side effect on the same scalar object or a value computation using the value of the same scalar object, and they are not potentially concurrent (1.10), the behavior is undefined.
In this case, the relation is indeterminately sequenced, not unsequenced. So there is no undefined behaviour.
The result is instead unspecified according to whether x is sequenced before x = x + 1 or the other way around. So there are only two possible outcomes, 42 and 49.
In case anyone had qualms about the x in f(x), the following text applies:
When calling a function (whether or not the function is inline), every value computation and side effect associated with any argument expression, or with the postfix expression designating the called function, is sequenced before execution of every expression or statement in the body of the called function.
So the evaluation of that x is sequenced before x = x + 1. This is an example of an evlauation that falls under the case of "specifically sequenced before" in the bolded quote above.
Footnote: the behaviour was exactly the same in C++03, but the terminology was different. In C++03 we say that there is a sequence point upon entry and exit of every function call, therefore the write to x inside the function is separated from the read of x outside the function by at least one sequence point.
You need to distinguish:
a) Operator precedence and associativity, which controls the order in which the values of subexpressions are combined by their operators.
b) The sequence of subexpression evaluation. E.g. in the expression f(x)/g(x), the compiler can evaluate g(x) first and f(x) afterwards. Nonetheless, the resulting value must be computed by dividing respective sub-values in the right order, of course.
c) The sequence of side-effects of the subexpressions. Roughly speaking, for example, the compiler might, for sake of optimization, decide to write values to the affected variables only at the end of the expression or any other suitable place.
As a very rough approximation, you can say, that within a single expression, the order of evaluation (not associativity etc.) is more or less unspecified. If you need a specific order of evaluation, break down the expression into series of statements like this:
int a = f(x);
int b = g(x);
return a/b;
instead of
return f(x)/g(x);
For exact rules, see http://en.cppreference.com/w/cpp/language/eval_order
Order of evaluation of the operands of almost all C++ operators is
unspecified. The compiler can evaluate operands in any order, and may
choose another order when the same expression is evaluated again
As the order of evaluation is not always the same hence you may get unexpected results.
Order of evaluation
Recently in an interview there was a following objective type question.
int a = 0;
cout << a++ << a;
Answers:
a. 10
b. 01
c. undefined behavior
I answered choice b, i.e. output would be "01".
But to my surprise later I was told by an interviewer that the correct answer is option c: undefined.
Now, I do know the concept of sequence points in C++. The behavior is undefined for the following statement:
int i = 0;
i += i++ + i++;
but as per my understanding for the statement cout << a++ << a , the ostream.operator<<() would be called twice, first with ostream.operator<<(a++) and later ostream.operator<<(a).
I also checked the result on VS2010 compiler and its output is also '01'.
You can think of:
cout << a++ << a;
As:
std::operator<<(std::operator<<(std::cout, a++), a);
C++ guarantees that all side effects of previous evaluations will have been performed at sequence points. There are no sequence points in between function arguments evaluation which means that argument a can be evaluated before argument std::operator<<(std::cout, a++) or after. So the result of the above is undefined.
C++17 update
In C++17 the rules have been updated. In particular:
In a shift operator expression E1<<E2 and E1>>E2, every value computation and side-effect of E1 is sequenced before every value computation and side effect of E2.
Which means that it requires the code to produce result b, which outputs 01.
See P0145R3 Refining Expression Evaluation Order for Idiomatic C++ for more details.
Technically, overall this is Undefined Behavior.
But, there are two important aspects to the answer.
The code statement:
std::cout << a++ << a;
is evaluated as:
std::operator<<(std::operator<<(std::cout, a++), a);
The standard does not define the order of evaluation of arguments to an function.
So Either:
std::operator<<(std::cout, a++) is evaluated first or
ais evaluated first or
it might be any implementation defined order.
This order is Unspecified[Ref 1] as per the standard.
[Ref 1]C++03 5.2.2 Function call
Para 8
The order of evaluation of arguments is unspecified. All side effects of argument expression evaluations take effect before the function is entered. The order of evaluation of the postfix expression and the argument expression list is unspecified.
Further, there is no sequence point between evaluation of arguments to a function but a sequence point exists only after evaluation of all arguments[Ref 2].
[Ref 2]C++03 1.9 Program execution [intro.execution]:
Para 17:
When calling a function (whether or not the function is inline), there is a sequence point after the evaluation of all function arguments (if any) which takes place before execution of any expressions or statements in the function body.
Note that, here the value of c is being accessed more than once without an intervening sequence point, regarding this the standard says:
[Ref 3]C++03 5 Expressions [expr]:
Para 4:
....
Between the previous and next sequence point a scalar object shall have its stored value modified at most once by the evaluation of an expression. Furthermore, the prior value shall be accessed only to determine the value to be stored. The requirements of this paragraph shall be met for each allowable ordering of the subexpressions of a full
expression; otherwise the behavior is undefined.
The code modifies c more than once without intervening sequence point and it is not being accessed to determine the value of the stored object. This is clear violation of the above clause and hence the result as mandated by the standard is Undefined Behavior[Ref 3].
Sequence points only define a partial ordering. In your case, you have
(once overload resolution is done):
std::cout.operator<<( a++ ).operator<<( a );
There is a sequence point between the a++ and the first call to
std::ostream::operator<<, and there is a sequence point between the
second a and the second call to std::ostream::operator<<, but there
is no sequence point between a++ and a; the only ordering
constraints are that a++ be fully evaluated (including side effects)
before the first call to operator<<, and that the second a be fully
evaluated before the second call to operator<<. (There are also
causual ordering constraints: the second call to operator<< cannot
preced the first, since it requires the results of the first as an
argument.) §5/4 (C++03) states:
Except where noted, the order of
evaluation of operands of individual operators and subexpressions of
individual expressions, and the order in which side effects take place,
is unspecified. Between the previous and next sequence point a scalar
object shall have its stored value modified at most once by the
evaluation of an expression. Furthermore, the prior value shall be
accessed only to determine the value to be stored. The requirements of
this paragraph shall be met for each allowable ordering of the
subexpressions of a full expression; otherwise the behavior is
undefined.
One of the allowable orderings of your expression is a++, a, first
call to operator<<, second call to operator<<; this modifies the
stored value of a (a++), and accesses it other than to determine
the new value (the second a), the behavior is undefined.
The correct answer is to question the question. The statement is unacceptable because a reader cannot see a clear answer. Another way to look at it is that we have introduced side-effects (c++) that make the statement much harder to interpret. Concise code is great, providing it's meaning is clear.